[opensuse-factory] Drivers for touchscreen...
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello, I am in need of drivers for a touchscreen.. 3M has drivers only for SuSE100, but they do not match 102. U-Buddy-sfn8:/home/monkey9 # smart install TWDrv-5.64-1.0.SuSE100.i686.rpm Loading cache... Updating cache... ######################################## [100%] Computing transaction... Installing packages (1): TWDrv-5.64-1.0@i686 208.6kB of package files are needed. 605.9kB will be used. Confirm changes? (Y/n): y Committing transaction... Preparing... ######################################## [ 0%] Output from TWDrv-5.64-1.0@i686: This was built for kernel version 2.6.13-15-default you have version 2.6.18.8-0.1-default error: %pre(TWDrv-5.64-1.0.i686) scriptlet failed, exit status 1 error: install: %pre scriptlet failed (2), skipping TWDrv-5.64-1.0 Saving cache... Who do i have to approach to get drivers built for 102 and 103? - -- Have a nice day, M9. Now, is the only time that exists. OS: Linux 2.6.18.8-01-default x86_64 Huidige gebruiker: monkey9@tribal-sfn2 Systeem: openSUSE 10.2 (X86-64) KDE: 3.5.5 "release 45.4" -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org iD8DBQFGM4lVX5/X5X6LpDgRAiPrAKClo4Bvk7LOfQ0QWt015DgiqFE6tACfThxi +PMLVYzVHr64X5fexpg3Y9M= =1dOD -----END PGP SIGNATURE----- --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
"M9."
Hello,
I am in need of drivers for a touchscreen.. 3M has drivers only for SuSE100, but they do not match 102.
opensource drivers with source? In that case, please persuade the author to get it into the official Linux kernel - and we'll grab it then, Andreas -- Andreas Jaeger, aj@suse.de, http://www.suse.de/~aj/ SUSE LINUX Products GmbH, GF: Markus Rex, HRB 16746 (AG Nürnberg) Maxfeldstr. 5, 90409 Nürnberg, Germany GPG fingerprint = 93A3 365E CE47 B889 DF7F FED1 389A 563C C272 A126
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Andreas Jaeger schreef:
"M9."
writes: Hello,
I am in need of drivers for a touchscreen.. 3M has drivers only for SuSE100, but they do not match 102.
opensource drivers with source? In that case, please persuade the author to get it into the official Linux kernel - and we'll grab it then,
OK, thnx for answering this quick! I'll jump into it ;-)
Andreas
- -- Have a nice day, M9. Now, is the only time that exists. OS: Linux 2.6.18.8-01-default x86_64 Huidige gebruiker: monkey9@tribal-sfn2 Systeem: openSUSE 10.2 (X86-64) KDE: 3.5.5 "release 45.4" -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org iD8DBQFGM5DcX5/X5X6LpDgRAuqjAKCu08uz5UmI70fROgjQ2Lm16qKnbwCcCjJ2 QjniRS66OyzTfdNEVhZz+oo= =lO1H -----END PGP SIGNATURE----- --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
On Sat, Apr 28, 2007 at 07:50:13PM +0200, M9. wrote:
Hello,
I am in need of drivers for a touchscreen.. 3M has drivers only for SuSE100, but they do not match 102.
Last time I looked, these were closed source drivers, so there's not much we can do about it. Please go ask 3M about it. good luck, greg k-h --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Greg KH schreef:
On Sat, Apr 28, 2007 at 07:50:13PM +0200, M9. wrote:
Hello,
I am in need of drivers for a touchscreen.. 3M has drivers only for SuSE100, but they do not match 102.
Last time I looked, these were closed source drivers, so there's not much we can do about it. Please go ask 3M about it.
I just did, not knowing this... Well, we'll see 'how the cookie crumbles'..
good luck,
than it seems we are going to need it...
greg k-h
- -- Have a nice day, M9. Now, is the only time that exists. OS: Linux 2.6.18.8-01-default x86_64 Huidige gebruiker: monkey9@tribal-sfn2 Systeem: openSUSE 10.2 (X86-64) KDE: 3.5.5 "release 45.4" -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org iD8DBQFGM5YKX5/X5X6LpDgRAiAqAKDMTkaZGr8MgahMS+lamjG2h+kYBwCeM0WZ z2wSVbaPw6VLXKk/6IDFeuw= =XnUl -----END PGP SIGNATURE----- --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 M9. schreef:
Greg KH schreef:
On Sat, Apr 28, 2007 at 07:50:13PM +0200, M9. wrote:
Hello,
I am in need of drivers for a touchscreen.. 3M has drivers only for SuSE100, but they do not match 102. Last time I looked, these were closed source drivers, so there's not much we can do about it. Please go ask 3M about it.
I just did, not knowing this... Well, we'll see 'how the cookie crumbles'..
good luck,
than it seems we are going to need it...
greg k-h
There is a source RPM availlable... (but i am not aware how to turn it into a useable RPM yet..) If there is someone who can point me to the url that explains this, i would be most gratefull.. ;-) - -- Have a nice day, M9. Now, is the only time that exists. OS: Linux 2.6.18.8-01-default x86_64 Huidige gebruiker: monkey9@tribal-sfn2 Systeem: openSUSE 10.2 (X86-64) KDE: 3.5.5 "release 45.4" -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org iD8DBQFGM5khX5/X5X6LpDgRAi/OAKCb2sVD4aNbTKInu0cqQoXcvsYO+gCgq1m8 BKKR6IF2vnCEArrqhubwVVw= =1nRX -----END PGP SIGNATURE----- --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 M9. schreef:
M9. schreef:
On Sat, Apr 28, 2007 at 07:50:13PM +0200, M9. wrote:
Hello,
I am in need of drivers for a touchscreen.. 3M has drivers only for SuSE100, but they do not match 102. Last time I looked, these were closed source drivers, so there's not much we can do about it. Please go ask 3M about it. I just did, not knowing this... Well, we'll see 'how the cookie crumbles'.. good luck,
Greg KH schreef: than it seems we are going to need it...
greg k-h
There is a source RPM availlable... (but i am not aware how to turn it into a useable RPM yet..) If there is someone who can point me to the url that explains this, i would be most gratefull.. ;-)
Allready found it:
----------------------------------- RETRIEVING THE FILES --------------------------------- TouchWare for Linux Kit is a source RPM file. This kit contains the required files to build a kernel driver specific to your kernel. This RPM works with any kernel 2.4 and 2.6 system. Before you can build the driver, you must create a custom built RPM for your system.
* Open a terminal window if you are not already at a command line prompt.
* Change your working directory to the location of the distribution RPM file.
* Issue the command "rpm -ivh TWDrv<version>.src.rpm" where <version> is the rest of the source RPM file name.
--------------------------------- BUILDING THE DRIVER --------------------------------- Before building the driver, you must have your kernel sources prepared for your system.
* Open a terminal window if you are not already at a command line prompt.
* Change your working directory to the location of the RPM spec files for your system. This is usually /usr/src/<repackage location>/SPECS. The placeholder for <repackage location> is system specific. For example, this directory is "redhat" for most Red Hat systems.
* Issue the command "rpmbuild -ba TWDrv.spec". This builds a driver specific to your kernel version. This results in a custom built RPM file which is located in /usr/src/<repackage location>/RPMS/i686.
--------------------------------- BUILDING FOR OTHER KERNELS --------------------------------- * It is possible to build the driver for kernels other than the one you are currently running. To do so, you must specify the environment variable KERNEL_RELEASE to define which kernel source to use. For example, the following lines build a driver for a 2.6.10-1.1 kernel source on a system.
KERNEL_RELEASE=2.6.10-1.1 export KERNEL_RELEASE rpmbuild -ba --define "kernel $KERNEL_RELEASE" TWDrv.spec
Seems everything allready in order..? - -- Have a nice day, M9. Now, is the only time that exists. OS: Linux 2.6.18.8-01-default x86_64 Huidige gebruiker: monkey9@tribal-sfn2 Systeem: openSUSE 10.2 (X86-64) KDE: 3.5.5 "release 45.4" -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org iD8DBQFGM5tZX5/X5X6LpDgRAqBSAKCAEd2cHx7T9S/GdbtJAR+dtDGjegCglmvC eM9fWLe8jMfzj5SGk4DK6so= =/4jR -----END PGP SIGNATURE----- --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
participants (3)
-
Andreas Jaeger
-
Greg KH
-
M9.