[opensuse-factory] Ati 3D
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 @Manfred, I found the file, but it is a sax generated file, which cannot be edited the way a script can be edited... # SaX generated X11 config file # Created on: 2006-11-15T15:58:21+0100. # # Version: 8.1 # Contact: Marcus Schaefer <sax@suse.de>, 2005 # Contact: SaX-User list <https://lists.berlios.de/mailman/listinfo/sax-users> # # Automatically generated by [ISaX] (8.1) # PLEASE DO NOT EDIT THIS FILE! # You know something about this? Or better contact Marcus? M9. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org iD8DBQFFXOUWX5/X5X6LpDgRAiKoAKCf1jr3RMAmjNhowYfxTOXi/ZPRygCePIN+ /JZ2g70/Y3HqV9hjdBNzhxE= =Sgg+ -----END PGP SIGNATURE----- --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
Robby (M9.) schrieb:
I found the file, but it is a sax generated file, which cannot be edited the way a script can be edited...
Of course you can edit the file! Just ignore the comment and edit it anyway. (What you shouldn't do is editing xorg.conf and then filing a bug against SaX2 for a config file that hasn't been generated by SaX2. But otherwise, xorg.conf is yours and you can do with it whatever you want.) --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Andreas Hanke schreef:
Robby (M9.) schrieb:
I found the file, but it is a sax generated file, which cannot be edited the way a script can be edited...
Of course you can edit the file!
Just ignore the comment and edit it anyway.
(What you shouldn't do is editing xorg.conf and then filing a bug against SaX2 for a config file that hasn't been generated by SaX2. But otherwise, xorg.conf is yours and you can do with it whatever you want.)
So i did, edited and added: Load "dri" to the top of the module list. Result: no xserver: out of range. (sax2 is handy in these situations.. ;) While trying to edit and repair the damage in safe mode, (how to save changes and exit here?),previous to the sax-'save', i saw:
Section "DRI" Group "video" Mode 0660 EndSection
near the bottom of the file... Does that mean that the driver is working by default, so adding "dri" to load is not nessesary, or desirable, and causes to prevent the xserver from starting? Or do i have another option to enable the 3D support for the card? I attached a sample of the config file... (if no time, i am not in a hurry..) tia. M9.
--------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
-----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org iD8DBQFFXZaNX5/X5X6LpDgRAvYXAKCo8wObVC/PFbPoZVR7ezdXYSDA7QCfQmT0 vg4Iu3BjvOASZPWQZTZ182c= =WGvt -----END PGP SIGNATURE----- # /.../ # SaX generated X11 config file # Created on: 2006-11-17T11:33:40+0100. # # Version: 8.1 # Contact: Marcus Schaefer <sax@suse.de>, 2005 # Contact: SaX-User list <https://lists.berlios.de/mailman/listinfo/sax-users> # # Automatically generated by [ISaX] (8.1) # PLEASE DO NOT EDIT THIS FILE! # Section "Files" FontPath "/usr/share/fonts/misc:unscaled" FontPath "/usr/share/fonts/local" FontPath "/usr/share/fonts/75dpi:unscaled" FontPath "/usr/share/fonts/100dpi:unscaled" FontPath "/usr/share/fonts/Type1" FontPath "/usr/share/fonts/URW" FontPath "/usr/share/fonts/Speedo" FontPath "/usr/share/fonts/PEX" FontPath "/usr/share/fonts/cyrillic" FontPath "/usr/share/fonts/latin2/misc:unscaled" FontPath "/usr/share/fonts/latin2/75dpi:unscaled" FontPath "/usr/share/fonts/latin2/100dpi:unscaled" FontPath "/usr/share/fonts/latin2/Type1" FontPath "/usr/share/fonts/latin7/75dpi:unscaled" FontPath "/usr/share/fonts/baekmuk:unscaled" FontPath "/usr/share/fonts/japanese:unscaled" FontPath "/usr/share/fonts/kwintv" FontPath "/usr/share/fonts/truetype" FontPath "/usr/share/fonts/uni:unscaled" FontPath "/usr/share/fonts/CID" FontPath "/usr/share/fonts/ucs/misc:unscaled" FontPath "/usr/share/fonts/ucs/75dpi:unscaled" FontPath "/usr/share/fonts/ucs/100dpi:unscaled" FontPath "/usr/share/fonts/hellas/misc:unscaled" FontPath "/usr/share/fonts/hellas/75dpi:unscaled" FontPath "/usr/share/fonts/hellas/100dpi:unscaled" FontPath "/usr/share/fonts/hellas/Type1" FontPath "/usr/share/fonts/misc/sgi:unscaled" FontPath "/usr/share/fonts/xtest" FontPath "/opt/kde3/share/fonts" FontPath "unix/:7100" InputDevices "/dev/gpmdata" InputDevices "/dev/input/mice" EndSection Section "ServerFlags" Option "AllowMouseOpenFail" "on" EndSection Section "Module" Load "dbe" Load "type1" Load "freetype" Load "extmod" Load "glx" Load "v4l" EndSection Section "InputDevice" Driver "kbd" Identifier "Keyboard[0]" Option "Protocol" "Standard" Option "XkbLayout" "us" Option "XkbModel" "pc104" Option "XkbRules" "xfree86" EndSection Section "InputDevice" Driver "mouse" Identifier "Mouse[1]" Option "Buttons" "5" Option "Device" "/dev/input/mice" Option "Name" "PS2++ Logitech Wheel Mouse" Option "Protocol" "explorerps/2" Option "Vendor" "Sysp" Option "ZAxisMapping" "4 5" EndSection Section "Monitor" DisplaySize 408 255 HorizSync 29-82 Identifier "Monitor[0]" ModelName "CMC 19AW" Option "DPMS" VendorName "CMO" VertRefresh 43-76 UseModes "Modes[0]" EndSection Section "Modes" Identifier "Modes[0]" Modeline "1440x900" 104.58 1440 1520 1672 1904 900 901 904 931 Modeline "1366x768" 104.73 1368 1448 1592 1816 768 769 772 801 Modeline "1360x768" 85.50 1360 1408 1440 1520 768 771 776 794 +HSync -VSync Modeline "1280x800" 105.78 1280 1360 1496 1712 800 801 804 835 Modeline "1280x800" 87.00 1280 1328 1360 1440 800 803 809 828 +HSync -VSync Modeline "1152x864" 104.99 1152 1224 1352 1552 864 865 868 902 Modeline "1152x864" 96.77 1152 1224 1344 1536 864 865 868 900 Modeline "1152x864" 89.56 1152 1224 1344 1536 864 865 868 897 Modeline "1152x864" 86.75 1152 1200 1232 1312 864 867 871 895 +HSync -VSync Modeline "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 Modeline "1280x768" 104.48 1280 1360 1496 1712 768 769 772 803 Modeline "1280x768" 95.88 1280 1352 1488 1696 768 769 772 800 Modeline "1280x768" 88.42 1280 1352 1488 1696 768 769 772 798 Modeline "1280x768" 85.75 1280 1328 1360 1440 768 771 778 796 +HSync -VSync Modeline "1280x768" 80.14 1280 1344 1480 1680 768 769 772 795 Modeline "1024x768" 83.00 1024 1080 1192 1360 768 769 772 803 Modeline "1024x768" 76.89 1024 1080 1192 1360 768 769 772 800 Modeline "1024x768" 70.50 1024 1072 1104 1184 768 771 775 796 +HSync -VSync Modeline "1024x768" 70.07 1024 1080 1184 1344 768 769 772 798 Modeline "1024x768" 64.11 1024 1080 1184 1344 768 769 772 795 Modeline "1280x600" 80.06 1280 1344 1480 1680 600 601 604 627 Modeline "1280x600" 73.49 1280 1336 1472 1664 600 601 604 625 Modeline "1280x600" 67.08 1280 1336 1464 1648 600 601 604 623 Modeline "1280x600" 67.00 1280 1328 1360 1440 600 603 613 622 +HSync -VSync Modeline "1280x600" 61.50 1280 1336 1464 1648 600 601 604 622 Modeline "1024x600" 64.04 1024 1080 1184 1344 600 601 604 627 Modeline "1024x600" 58.65 1024 1072 1176 1328 600 601 604 625 Modeline "1024x600" 55.00 1024 1072 1104 1184 600 603 613 622 +HSync -VSync Modeline "1024x600" 54.05 1024 1072 1176 1328 600 601 604 623 Modeline "1024x600" 48.96 1024 1064 1168 1312 600 601 604 622 Modeline "800x600" 50.32 800 840 928 1056 600 601 604 627 Modeline "800x600" 45.93 800 840 920 1040 600 601 604 625 Modeline "800x600" 44.75 800 848 880 960 600 603 607 622 +HSync -VSync Modeline "800x600" 42.33 800 840 920 1040 600 601 604 623 Modeline "800x600" 38.22 800 832 912 1024 600 601 604 622 Modeline "768x576" 46.12 768 808 888 1008 576 577 580 602 Modeline "768x576" 42.06 768 800 880 992 576 577 580 600 Modeline "768x576" 41.50 768 816 848 928 576 579 583 597 +HSync -VSync Modeline "768x576" 38.82 768 800 880 992 576 577 580 599 Modeline "768x576" 34.96 768 792 872 976 576 577 580 597 Modeline "640x480" 31.13 640 664 728 816 480 481 484 502 Modeline "640x480" 29.75 640 688 720 800 480 483 487 498 +HSync -VSync Modeline "640x480" 28.83 640 664 728 816 480 481 484 500 Modeline "640x480" 26.60 640 664 728 816 480 481 484 499 Modeline "640x480" 23.86 640 656 720 800 480 481 484 497 EndSection Section "Screen" DefaultDepth 24 SubSection "Display" Depth 15 Modes "1440x900" "1366x768" "1280x800" "1152x864" "1280x768" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480" EndSubSection SubSection "Display" Depth 16 Modes "1440x900" "1366x768" "1280x800" "1152x864" "1280x768" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480" EndSubSection SubSection "Display" Depth 24 Modes "1440x900" "1366x768" "1280x800" "1152x864" "1280x768" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480" EndSubSection SubSection "Display" Depth 8 Modes "1440x900" "1366x768" "1280x800" "1152x864" "1280x768" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480" EndSubSection Device "Device[0]" Identifier "Screen[0]" Monitor "Monitor[0]" EndSection Section "Device" BoardName "RV350 AS" BusID "1:0:0" Driver "radeon" Identifier "Device[0]" VendorName "ATI" EndSection Section "ServerLayout" Identifier "Layout[all]" InputDevice "Keyboard[0]" "CoreKeyboard" InputDevice "Mouse[1]" "CorePointer" Option "Clone" "off" Option "Xinerama" "off" Screen "Screen[0]" EndSection Section "DRI" Group "video" Mode 0660 EndSection Section "Extensions" EndSection
Am Freitag, 17. November 2006 12:01 schrieb Robby (M9.):
So i did, edited and added: Load "dri" to the top of the module list. Result: no xserver: out of range. (sax2 is handy in these situations.. ;)
I've allways added it on the bottom of the list.
While trying to edit and repair the damage in safe mode, (how to save
changes and exit here?),previous to the sax-'save', i saw:
Just boot in runlevel3,
Section "DRI" Group "video" Mode 0660 EndSection
near the bottom of the file...
Does that mean that the driver is working by default, so adding "dri" to load is not nessesary, or desirable, and causes to prevent the xserver from starting?
No, it's only to set the rights, when it's enabled.
Or do i have another option to enable the 3D support for the card? I attached a sample of the config file...
You have to load the dri modul, otherwise it can't work. I've attached my version (at the moment SUSE 10.1 with xorg 7.2 from the buildserver, 3D works, AIGLX not realy, the same problem as in http://bugs.beryl-project.org/ticket/469, but XGL doesn't work, too) -- Machs gut | http://www.iivs.de/schwinde/buerger/tremmel/ | http://packman.links2linux.de/ Manfred | http://www.knightsoft-net.de
participants (3)
-
Andreas Hanke -
Manfred Tremmel -
Robby (M9.)