[opensuse-factory] Installation from Alpha6 Error code -3030
Hello, I try to install the Alpha6 on my Dell Desktop PC. When the system go to format the disk i get the error -3030. Nothing will be done. The disk is an raid1 system. Under Opensuse10.2 it works very fine. Bye Bjørn --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
Try in the boot command line for the installation with: "install pci=nomsi" Tell me if it works Bye 2007/7/20, Bjørn Bendix <bbendix@web.de>:
Hello,
I try to install the Alpha6 on my Dell Desktop PC. When the system go to format the disk i get the error -3030. Nothing will be done. The disk is an raid1 system. Under Opensuse10.2 it works very fine.
Bye Bjørn --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
--------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
Hello, No it work not. The same error. Bye Bjørn
Try in the boot command line for the installation with: "install pci=nomsi"
Tell me if it works
Bye
2007/7/20, Bjørn Bendix <bbendix@web.de>:
Hello,
I try to install the Alpha6 on my Dell Desktop PC. When the system go to format the disk i get the error -3030. Nothing will be done. The disk is an raid1 system. Under Opensuse10.2 it works very fine.
Bye Bjørn --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
--------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
Hello, So now had more time to test it. The exact error message is: Failure occurred during following acion: Formatting device mapper volume /dev/mapper/isw_cacdbdbii_linux_part5 (70,5MB) with ext3 System error code was: -3030 I also have tested the save installation and i got the same error. Bye Bjørn
No it work not. The same error.
Bye Bjørn
Try in the boot command line for the installation with: "install pci=nomsi"
Tell me if it works
--------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
--------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
* Bjørn Bendix <bbendix@web.de> [Jul 22. 2007 02:10]:
Hello,
So now had more time to test it. The exact error message is: Failure occurred during following acion: Formatting device mapper volume /dev/mapper/isw_cacdbdbii_linux_part5 (70,5MB) with ext3
Is this a newly created partition ?
System error code was: -3030
I also have tested the save installation and i got the same error.
Please open a bug report and attach full logs. Looks like udev hasn't picked up the new partition yet ... Klaus --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
Hello, I tryd both, first i wanted only to format the old partitions. Next try was with removing the partitions and set them new. The error comes when the installer trys to format. OK i will open a bug report. Bye Bjørn
* Bjørn Bendix <bbendix@web.de> [Jul 22. 2007 02:10]:
Hello,
So now had more time to test it. The exact error message is: Failure occurred during following acion: Formatting device mapper volume /dev/mapper/isw_cacdbdbii_linux_part5 (70,5MB) with ext3
Is this a newly created partition ?
System error code was: -3030
I also have tested the save installation and i got the same error.
Please open a bug report and attach full logs. Looks like udev hasn't picked up the new partition yet ...
Klaus --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
--------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
* Bjørn Bendix <bbendix@web.de> [Jul 22. 2007 11:12]:
Hello,
I tryd both, first i wanted only to format the old partitions. Next try was with removing the partitions and set them new. The error comes when the installer trys to format.
Thanks, this actually supports my suspicion that the new partition does not show up as /dev/mapper/isw_cacdbdbii_linux_part5 So its either a udev problem (in creating the /dev/mapper/... entry) or a YaST bug (/dev/mapper/isw_cacdbdbii_linux_part5 might be wrong)
OK i will open a bug report.
Yes, please do ! Klaus --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
Hello, Reported as bug https://bugzilla.novell.com/show_bug.cgi?id=293728 Bye Bjørn
* Bjørn Bendix <bbendix@web.de> [Jul 22. 2007 11:12]:
Hello,
I tryd both, first i wanted only to format the old partitions. Next try was with removing the partitions and set them new. The error comes when the installer trys to format.
Thanks, this actually supports my suspicion that the new partition does not show up as /dev/mapper/isw_cacdbdbii_linux_part5
So its either a udev problem (in creating the /dev/mapper/... entry) or a YaST bug (/dev/mapper/isw_cacdbdbii_linux_part5 might be wrong)
OK i will open a bug report.
Yes, please do !
Klaus --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
--------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
participants (3)
-
Bjørn Bendix -
Juan Erbes -
Klaus Kaempf