since yesterday no sound on laptop
Hi, all of a sudden sound has stopped working on my laptop. I'm on TW 20210830, I already tried going back several snapshots all the way to 20210827, didn't help. Any ideas? What info do you guys need to help figuring this out? as soon as I log into KDE I see this in the kernel output: snd_hda_codec_realtek ehdaudio0D0: didn't find PCM for DAI Digital Codec DAI snd_hda_codec_realtek ehdaudio0D0: ASoC: error at snd_soc_dai_startup on Digital Codec DAI: -22 Digital Playback and Capture: soc_pcm_open() failed (-22) HDA Digital: ASoC: dpcm_be_dai_startup() failed at Digital Playback and Capture (-22) HDA Digital: dpcm_fe_dai_startup() failed (-22) snd_hda_codec_realtek ehdaudio0D0: didn't find PCM for DAI Digital Codec DAI snd_hda_codec_realtek ehdaudio0D0: ASoC: error at snd_soc_dai_startup on Digital Codec DAI: -22 Digital Playback and Capture: soc_pcm_open() failed (-22) HDA Digital: ASoC: dpcm_be_dai_startup() failed at Digital Playback and Capture (-22) HDA Digital: dpcm_fe_dai_startup() failed (-22) mio:~ # hwinfo --sound 19: PCI 1f.3: 0401 Multimedia audio controller [Created at pci.386] Unique ID: nS1_.HGCy71q8xS8 SysFS ID: /devices/pci0000:00/0000:00:1f.3 SysFS BusID: 0000:00:1f.3 Hardware Class: sound Device Name: "Onboard - Sound" Model: "Intel Tiger Lake-LP Smart Sound Technology Audio Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0xa0c8 "Tiger Lake-LP Smart Sound Technology Audio Controller" SubVendor: pci 0x1462 "Micro-Star International Co., Ltd. [MSI]" SubDevice: pci 0x12e2 Revision: 0x20 Driver: "sof-audio-pci-intel-tgl" Driver Modules: "snd_sof_pci_intel_tgl" Memory Range: 0x6053188000-0x605318bfff (rw,non-prefetchable) Memory Range: 0x6053000000-0x60530fffff (rw,non-prefetchable) IRQ: 173 (2013 events) Module Alias: "pci:v00008086d0000A0C8sv00001462sd000012E2bc04sc01i00" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Driver Info #1: Driver Status: snd_sof_pci_intel_tgl is active Driver Activation Cmd: "modprobe snd_sof_pci_intel_tgl" Config Status: cfg=yes, avail=yes, need=no, active=unknown Any ideas? Cheers MH -- Mathias Homann Mathias.Homann@openSUSE.org telegram: https://telegram.me/lemmy98 irc: [lemmy] on freenode and ircnet obs: lemmy04 gpg key fingerprint: 8029 2240 F4DD 7776 E7D2 C042 6B8E 029E 13F2 C102
Am 2021-09-01 10:27, schrieb Mathias Homann:
Hi,
all of a sudden sound has stopped working on my laptop.
I'm on TW 20210830, I already tried going back several snapshots all the way to 20210827, didn't help.
the funny part is that yesterday evening, and this morning before the last "tumbleweed upgrade" which was from 20210829 to 20210830 sound worked "just fine". And just to be sure I dualbooted to windows just now, sound works there - so its not the hardware... Google reveals something to do with firmware. where someone on gentoo had a similar issue a year ago, and then solved it but didn't tell the rest of the people how. Any ideas for me? Cheers MH
On 2021-09-01 10:27, Mathias Homann wrote:
Any ideas? What info do you guys need to help figuring this out?
Not that I'm sure I can help but a starting point would be some more info from alsa/pulseaudio. run pa-info or even better LANG=C pa-info | susepaste -t "pa-info" -e "10080" -- /bengan
Mathias, Sorry, multiple typos in the my previous msg....here's the corrected version... For me sound stopped working in my TW virtual machine (host runs Win 10 normally but also has TW installed) after I updated from 20210805 to 20210820. I figured it would be fixed quickly but I have since updated to 20210826 and 20210827 and it is still NOT working. Interestingly, if I boot the host machine to TW (host has Win10 and TW installed) then when I update it from 20210805 to each of those versions sound continued to work on the host machine running TW. Sound also works fine when the host is booted to Win10 and sound works fine in other VMs, it is just the TW vm that is broke. If I boot the TW vm to the 20210805 read/only snapshot then sound works for it again but as soon as I boot back to 20210820, 20210826, or 20210827 then sound stops working again. I'm still looking for a solution.... Joe
Am Mittwoch, 1. September 2021, 22:57:51 CEST schrieb Bengt Gördén:
On 2021-09-01 10:27, Mathias Homann wrote:
Any ideas? What info do you guys need to help figuring this out?
Not that I'm sure I can help but a starting point would be some more info from alsa/pulseaudio.
run pa-info
or even better LANG=C pa-info | susepaste -t "pa-info" -e "10080"
run as root, as regular user, from inside the DE, from a shell without DE? here: https://paste.opensuse.org/34861552 is a run as root through ssh from the outside. Cheers Mathias -- Mathias Homann Mathias.Homann@openSUSE.org Jabber (XMPP): lemmy@tuxonline.tech IRC: [Lemmy] on freenode and ircnet (bouncer active) telegram: https://telegram.me/lemmy98 keybase: https://keybase.io/lemmy gpg key fingerprint: 8029 2240 F4DD 7776 E7D2 C042 6B8E 029E 13F2 C102
Is the previous kernel available for boot in the Grub? Looks like your card module is broken since that update. On 2021-09-02 15:08, Mathias Homann wrote:
Am Mittwoch, 1. September 2021, 22:57:51 CEST schrieb Bengt Gördén:
On 2021-09-01 10:27, Mathias Homann wrote:
Any ideas? What info do you guys need to help figuring this out?
Not that I'm sure I can help but a starting point would be some more info from alsa/pulseaudio.
run pa-info
or even better LANG=C pa-info | susepaste -t "pa-info" -e "10080"
run as root, as regular user, from inside the DE, from a shell without DE?
here: https://paste.opensuse.org/34861552 is a run as root through ssh from the outside.
Cheers Mathias
Am Donnerstag, 2. September 2021, 08:12:05 CEST schrieb Konstantin Voinov:
Is the previous kernel available for boot in the Grub? Looks like your card module is broken since that update.
I already tried the previous two kernels, that didn't work... Cheers MH -- Mathias Homann Mathias.Homann@openSUSE.org OBS: lemmy04 Jabber (XMPP): lemmy@tuxonline.tech IRC: [Lemmy] on freenode and ircnet (bouncer active) telegram: https://telegram.me/lemmy98 keybase: https://keybase.io/lemmy gpg key fingerprint: 8029 2240 F4DD 7776 E7D2 C042 6B8E 029E 13F2 C102
Mathias, Any luck getting it to work? Today I updated my TW vm from 20210827 to 20210831 and the sound problems is still there. If I reboot to the TW 20210805 r/o snapshot then sound works again but booting back to 20210831 and it is broken again. One difference between 20210805 and then newer builds where I have having the problem is that when I run "aplay -l" on 20210805 it lists "Pulse Audio Sound Server" but when run on the newer builds it says "PipeWire Sound Server" Sounds like something was broken during that conversion. If I run "hwinfo --sound" when 20210831 is booted I get 34: PCI 202.0: 0401 Multimedia audio controller [Created at pci.386] Unique ID: LHB6.FGsk7T8RAT9 Parent ID: 7EWs.3XzZP_1GzlF SysFS ID: /devices/pci0000:00/0000:00:11.0/0000:02:02.0 SysFS BusID: 0000:02:02.0 Hardware Class: sound Device Name: "sound" Model: "Ensoniq Audio PCI 64V/128/5200 / Creative CT4810/CT5803/CT5806 [Sound Blaster PCI]" Vendor: pci 0x1274 "Ensoniq" Device: pci 0x1371 "ES1371/ES1373 / Creative Labs CT2518" SubVendor: pci 0x1274 "Ensoniq" SubDevice: pci 0x1371 "Audio PCI 64V/128/5200 / Creative CT4810/CT5803/CT5806 [Sound Blaster PCI]" Revision: 0x02 Driver: "snd_ens1371" Driver Modules: "snd_ens1371" I/O Ports: 0x1000-0x1fff (rw) IRQ: 16 (13946 events) Module Alias: "pci:v00001274d00001371sv00001274sd00001371bc04sc01i00" Driver Info #0: Driver Status: snd_ens1371 is active Driver Activation Cmd: "modprobe snd_ens1371" Config Status: cfg=yes, avail=yes, need=no, active=unknown Attached to: #46 (PCI bridge) If I run pa-info as my user I get ________________
pulseaudio_ps_do joe 16805 0.0 0.0 3184 1488 pts/3 S+ 13:47 0:00 grep pulseaudio
which pulseaudio
pidof pulseaudio
pulseaudio --version
pactl info Server String: /run/user/1000/pulse/native Library Protocol Version: 35 Server Protocol Version: 35 Is Local: yes Client Index: 50 Tile Size: 65472 User Name: joe Host Name: DadLC.fios-router.home Server Name: PulseAudio (on PipeWire 0.3.34) Server Version: 15.0.0 Default Sample Specification: float32le 2ch 48000Hz Default Channel Map: front-left,front-right Default Sink: alsa_output.pci-0000_02_02.0.analog-stereo Default Source: alsa_output.pci-0000_02_02.0.analog-stereo.monitor Cookie: bfb4:eff1
pactl list Module #1 Name: libpipewire-module-rtkit Argument: { #nice.level = -11 #rt.prio = 88 #rt.time.soft = 2000000 #rt.time.hard = 2000000 } Usage counter: n/a Properties: module.name = "libpipewire-module-rtkit" object.id = "1" module.author = "Wim Taymans <wim.taymans@gmail.com>" module.description = "Use RTKit to raise thread priorities" module.usage = "[nice.level=<priority: default -11>] [rt.prio=<priority: default 88>] [rt.time.soft=<in usec: default 2000000] [rt.time.hard=<in usec: default 2000000] " module.version = "0.3.34" nice.level = "-11" rt.prio = "88" rt.time.soft = "2000000" rt.time.hard = "2000000"
Module #2 Name: libpipewire-module-protocol-native Argument: Usage counter: n/a Properties: module.name = "libpipewire-module-protocol-native" object.id = "2" module.author = "Wim Taymans <wim.taymans@gmail.com>" module.description = "Native protocol using unix sockets" module.version = "0.3.34" Module #3 Name: libpipewire-module-profiler Argument: Usage counter: n/a Properties: module.name = "libpipewire-module-profiler" object.id = "3" module.author = "Wim Taymans <wim.taymans@gmail.com>" module.description = "Generate Profiling data" module.version = "0.3.34" Module #5 Name: libpipewire-module-metadata Argument: Usage counter: n/a Properties: module.name = "libpipewire-module-metadata" object.id = "5" module.author = "Wim Taymans <wim.taymans@gmail.com>" module.description = "Allow clients to create metadata store" module.version = "0.3.34" Module #7 Name: libpipewire-module-spa-device-factory Argument: Usage counter: n/a Properties: module.name = "libpipewire-module-spa-device-factory" object.id = "7" module.author = "Wim Taymans <wim.taymans@gmail.com>" module.description = "Provide a factory to make SPA devices" module.version = "0.3.34" Module #9 Name: libpipewire-module-spa-node-factory Argument: Usage counter: n/a Properties: module.name = "libpipewire-module-spa-node-factory" object.id = "9" module.author = "Wim Taymans <wim.taymans@gmail.com>" module.description = "Provide a factory to make SPA nodes" module.version = "0.3.34" Module #11 Name: libpipewire-module-client-node Argument: Usage counter: n/a Properties: module.name = "libpipewire-module-client-node" object.id = "11" module.author = "Wim Taymans <wim.taymans@gmail.com>" module.description = "Allow clients to create and control remote nodes" module.version = "0.3.34" Module #13 Name: libpipewire-module-client-device Argument: Usage counter: n/a Properties: module.name = "libpipewire-module-client-device" object.id = "13" module.author = "Wim Taymans <wim.taymans@gmail.com>" module.description = "Allow clients to create and control remote devices" module.version = "0.3.34" Module #15 Name: libpipewire-module-portal Argument: Usage counter: n/a Properties: module.name = "libpipewire-module-portal" object.id = "15" Module #16 Name: libpipewire-module-access Argument: { # access.allowed to list an array of paths of allowed # apps. #access.allowed = [ # /usr/bin/pipewire-media-session #] # An array of rejected paths. #access.rejected = [ ] # An array of paths with restricted access. #access.restricted = [ ] # Anything not in the above lists gets assigned the # access.force permission. #access.force = flatpak } Usage counter: n/a Properties: module.name = "libpipewire-module-access" object.id = "16" module.author = "Wim Taymans <wim.taymans@gmail.com>" module.description = "Perform access check" module.usage = "[ access.force=flatpak ] [ access.allowed=<cmd-line> ] [ access.rejected=<cmd-line> ] [ access.restricted=<cmd-line> ] " module.version = "0.3.34" Module #17 Name: libpipewire-module-adapter Argument: Usage counter: n/a Properties: module.name = "libpipewire-module-adapter" object.id = "17" module.author = "Wim Taymans <wim.taymans@gmail.com>" module.description = "Manage adapter nodes" module.version = "0.3.34" Module #19 Name: libpipewire-module-link-factory Argument: Usage counter: n/a Properties: module.name = "libpipewire-module-link-factory" object.id = "19" module.author = "Wim Taymans <wim.taymans@gmail.com>" module.description = "Allow clients to create links" module.version = "0.3.34" Module #21 Name: libpipewire-module-session-manager Argument: Usage counter: n/a Properties: module.name = "libpipewire-module-session-manager" object.id = "21" module.author = "George Kiagiadakis <george.kiagiadakis@collabora.com>" module.description = "Implements objects for session management" module.version = "0.3.34" Sink #41 State: SUSPENDED Name: alsa_output.pci-0000_02_02.0.analog-stereo Description: ES1371/ES1373 / Creative Labs CT2518 (Audio PCI 64V/128/5200 / Creative CT4810/CT5803/CT5806 [Sound Blaster PCI]) Analog Stereo Driver: PipeWire Sample Specification: s16le 2ch 48000Hz Channel Map: front-left,front-right Owner Module: 4294967295 Mute: no Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB balance 0.00 Base Volume: 6554 / 10% / -60.00 dB Monitor Source: alsa_output.pci-0000_02_02.0.analog-stereo.monitor Latency: 0 usec, configured 0 usec Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY Properties: object.path = "alsa:pcm:0:front:0:playback" api.alsa.path = "front:0" api.alsa.pcm.card = "0" api.alsa.pcm.stream = "playback" audio.channels = "2" audio.position = "FL,FR" device.routes = "1" alsa.resolution_bits = "16" device.api = "alsa" device.class = "sound" alsa.class = "generic" alsa.subclass = "generic-mix" alsa.name = "ES1371 DAC2/ADC" alsa.id = "ES1371/1" alsa.subdevice = "0" alsa.subdevice_name = "subdevice #0" alsa.device = "0" alsa.card = "0" alsa.card_name = "Ensoniq AudioPCI" alsa.long_card_name = "Ensoniq AudioPCI ENS1371 at 0x1000, irq 16" alsa.driver_name = "snd_ens1371" device.profile.name = "analog-stereo" device.profile.description = "Analog Stereo" card.profile.device = "4" device.id = "40" factory.name = "api.alsa.pcm.sink" priority.driver = "1009" priority.session = "1009" media.class = "Audio/Sink" node.nick = "Ensoniq AudioPCI" node.name = "alsa_output.pci-0000_02_02.0.analog-stereo" device.description = "ES1371/ES1373 / Creative Labs CT2518 (Audio PCI 64V/128/5200 / Creative CT4810/CT5803/CT5806 [Sound Blaster PCI]) Analog Stereo" device.icon_name = "audio-card-analog" node.pause-on-idle = "false" factory.id = "18" client.id = "32" node.driver = "true" factory.mode = "merge" audio.adapt.follower = "" library.name = "audioconvert/libspa-audioconvert" object.id = "41" node.max-latency = "4096/48000" Ports: analog-output: Analog Output (type: Analog, priority: 9900, availability unknown) Active Port: analog-output Formats: pcm Source #65577 State: SUSPENDED Name: alsa_output.pci-0000_02_02.0.analog-stereo.monitor Description: Monitor of ES1371/ES1373 / Creative Labs CT2518 (Audio PCI 64V/128/5200 / Creative CT4810/CT5803/CT5806 [Sound Blaster PCI]) Analog Stereo Driver: PipeWire Sample Specification: s16le 2ch 48000Hz Channel Map: front-left,front-right Owner Module: 4294967295 Mute: no Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB balance 0.00 Base Volume: 65536 / 100% / 0.00 dB Monitor of Sink: alsa_output.pci-0000_02_02.0.analog-stereo Latency: 0 usec, configured 0 usec Flags: HARDWARE DECIBEL_VOLUME LATENCY Properties: object.path = "alsa:pcm:0:front:0:playback" api.alsa.path = "front:0" api.alsa.pcm.card = "0" api.alsa.pcm.stream = "playback" audio.channels = "2" audio.position = "FL,FR" device.routes = "1" alsa.resolution_bits = "16" device.api = "alsa" device.class = "sound" alsa.class = "generic" alsa.subclass = "generic-mix" alsa.name = "ES1371 DAC2/ADC" alsa.id = "ES1371/1" alsa.subdevice = "0" alsa.subdevice_name = "subdevice #0" alsa.device = "0" alsa.card = "0" alsa.card_name = "Ensoniq AudioPCI" alsa.long_card_name = "Ensoniq AudioPCI ENS1371 at 0x1000, irq 16" alsa.driver_name = "snd_ens1371" device.profile.name = "analog-stereo" device.profile.description = "Analog Stereo" card.profile.device = "4" device.id = "40" factory.name = "api.alsa.pcm.sink" priority.driver = "1009" priority.session = "1009" media.class = "Audio/Sink" node.nick = "Ensoniq AudioPCI" node.name = "alsa_output.pci-0000_02_02.0.analog-stereo" device.description = "ES1371/ES1373 / Creative Labs CT2518 (Audio PCI 64V/128/5200 / Creative CT4810/CT5803/CT5806 [Sound Blaster PCI]) Analog Stereo" device.icon_name = "audio-card-analog" node.pause-on-idle = "false" factory.id = "18" client.id = "32" node.driver = "true" factory.mode = "merge" audio.adapt.follower = "" library.name = "audioconvert/libspa-audioconvert" object.id = "41" node.max-latency = "4096/48000" Formats: pcm Client #31 Driver: PipeWire Owner Module: 2 Properties: pipewire.protocol = "protocol-native" pipewire.sec.pid = "1937" pipewire.sec.uid = "1000" pipewire.sec.gid = "1001" module.id = "2" object.id = "31" config.prefix = "media-session.d" config.name = "media-session.conf" cpu.max-align = "32" default.clock.rate = "48000" default.clock.allowed-rates = "[ 48000 ]" default.clock.quantum = "1024" default.clock.min-quantum = "32" default.clock.max-quantum = "8192" default.video.width = "640" default.video.height = "480" default.video.rate.num = "25" default.video.rate.denom = "1" log.level = "2" clock.power-of-two-quantum = "true" link.max-buffers = "64" mem.warn-mlock = "false" mem.allow-mlock = "true" application.name = "pipewire-media-session" application.process.binary = "pipewire-media-session" application.language = "en_US.UTF-8" application.process.id = "1937" application.process.user = "joe" application.process.host = "DadLC.fios-router.home" application.process.session_id = "2" window.x11.display = ":0" core.version = "0.3.34" core.name = "pipewire-joe-1937" pipewire.access = "unrestricted" Client #32 Driver: PipeWire Owner Module: 2 Properties: pipewire.protocol = "protocol-native" pipewire.sec.pid = "1937" pipewire.sec.uid = "1000" pipewire.sec.gid = "1001" module.id = "2" object.id = "32" config.prefix = "media-session.d" config.name = "media-session.conf" cpu.max-align = "32" default.clock.rate = "48000" default.clock.allowed-rates = "[ 48000 ]" default.clock.quantum = "1024" default.clock.min-quantum = "32" default.clock.max-quantum = "8192" default.video.width = "640" default.video.height = "480" default.video.rate.num = "25" default.video.rate.denom = "1" log.level = "2" clock.power-of-two-quantum = "true" link.max-buffers = "64" mem.warn-mlock = "false" mem.allow-mlock = "true" application.name = "pipewire-media-session" application.process.binary = "pipewire-media-session" application.language = "en_US.UTF-8" application.process.id = "1937" application.process.user = "joe" application.process.host = "DadLC.fios-router.home" application.process.session_id = "2" window.x11.display = ":0" core.version = "0.3.34" core.name = "pipewire-joe-1937" pipewire.access = "unrestricted" Client #46 Driver: PipeWire Owner Module: 2 Properties: pipewire.protocol = "protocol-native" pipewire.sec.pid = "1938" pipewire.sec.uid = "1000" pipewire.sec.gid = "1001" module.id = "2" object.id = "46" client.api = "pipewire-pulse" pulse.server.type = "unix" application.name = "Plasma PA" application.id = "org.kde.plasma-pa" application.icon_name = "audio-card" application.process.id = "1659" application.process.user = "joe" application.process.host = "DadLC.fios-router.home" application.process.binary = "plasmashell" application.language = "en_US.UTF-8" window.x11.display = ":0" application.process.machine_id = "f0e3e8c344634ef18f7d484b21864e7d" application.process.session_id = "2" config.name = "pipewire-pulse.conf" cpu.max-align = "32" default.clock.rate = "48000" default.clock.allowed-rates = "[ 48000 ]" default.clock.quantum = "1024" default.clock.min-quantum = "32" default.clock.max-quantum = "8192" default.video.width = "640" default.video.height = "480" default.video.rate.num = "25" default.video.rate.denom = "1" log.level = "2" clock.power-of-two-quantum = "true" link.max-buffers = "64" mem.warn-mlock = "false" mem.allow-mlock = "true" core.version = "0.3.34" core.name = "pipewire-joe-1938" pipewire.access = "unrestricted" Client #47 Driver: PipeWire Owner Module: 2 Properties: pipewire.protocol = "protocol-native" pipewire.sec.pid = "2171" pipewire.sec.uid = "1000" pipewire.sec.gid = "1001" module.id = "2" object.id = "47" pipewire.access.portal.is_portal = "true" portal.monitor = "Camera" log.level = "0" cpu.max-align = "32" default.clock.rate = "48000" default.clock.allowed-rates = "[ 48000 ]" default.clock.quantum = "1024" default.clock.min-quantum = "32" default.clock.max-quantum = "8192" default.video.width = "640" default.video.height = "480" default.video.rate.num = "25" default.video.rate.denom = "1" clock.power-of-two-quantum = "true" link.max-buffers = "64" mem.warn-mlock = "false" mem.allow-mlock = "true" application.name = "xdg-desktop-portal" application.process.binary = "xdg-desktop-portal" application.language = "en_US.UTF-8" application.process.id = "2171" application.process.user = "joe" application.process.host = "DadLC.fios-router.home" application.process.session_id = "2" window.x11.display = ":0" core.version = "0.3.34" core.name = "pipewire-joe-2171" pipewire.access = "unrestricted" Client #48 Driver: PipeWire Owner Module: 2 Properties: pipewire.protocol = "protocol-native" pipewire.sec.pid = "1938" pipewire.sec.uid = "1000" pipewire.sec.gid = "1001" module.id = "2" object.id = "48" client.api = "pipewire-pulse" pulse.server.type = "unix" application.name = "Google Chrome input" application.process.id = "2820" application.process.user = "joe" application.process.host = "DadLC.fios-router.home" application.process.binary = "chrome" application.language = "en_US.UTF-8" window.x11.display = ":0" application.process.machine_id = "f0e3e8c344634ef18f7d484b21864e7d" application.process.session_id = "2" config.name = "pipewire-pulse.conf" cpu.max-align = "32" default.clock.rate = "48000" default.clock.allowed-rates = "[ 48000 ]" default.clock.quantum = "1024" default.clock.min-quantum = "32" default.clock.max-quantum = "8192" default.video.width = "640" default.video.height = "480" default.video.rate.num = "25" default.video.rate.denom = "1" log.level = "2" clock.power-of-two-quantum = "true" link.max-buffers = "64" mem.warn-mlock = "false" mem.allow-mlock = "true" core.version = "0.3.34" core.name = "pipewire-joe-1938" pipewire.access = "unrestricted" Client #49 Driver: PipeWire Owner Module: 2 Properties: pipewire.protocol = "protocol-native" pipewire.sec.pid = "1938" pipewire.sec.uid = "1000" pipewire.sec.gid = "1001" module.id = "2" object.id = "49" client.api = "pipewire-pulse" pulse.server.type = "unix" application.name = "EfficientCalendarFree.exe" application.process.id = "1689" application.process.user = "joe" application.process.host = "DadLC.fios-router.home" application.process.binary = "wine-preloader" application.language = "en_US.UTF-8" window.x11.display = ":0" application.process.machine_id = "f0e3e8c344634ef18f7d484b21864e7d" application.process.session_id = "2" config.name = "pipewire-pulse.conf" cpu.max-align = "32" default.clock.rate = "48000" default.clock.allowed-rates = "[ 48000 ]" default.clock.quantum = "1024" default.clock.min-quantum = "32" default.clock.max-quantum = "8192" default.video.width = "640" default.video.height = "480" default.video.rate.num = "25" default.video.rate.denom = "1" log.level = "2" clock.power-of-two-quantum = "true" link.max-buffers = "64" mem.warn-mlock = "false" mem.allow-mlock = "true" core.version = "0.3.34" core.name = "pipewire-joe-1938" pipewire.access = "unrestricted" Client #50 Driver: PipeWire Owner Module: 2 Properties: pipewire.protocol = "protocol-native" pipewire.sec.pid = "1938" pipewire.sec.uid = "1000" pipewire.sec.gid = "1001" module.id = "2" object.id = "50" client.api = "pipewire-pulse" pulse.server.type = "unix" application.process.id = "16810" application.process.user = "joe" application.process.host = "DadLC.fios-router.home" application.process.binary = "pactl" application.name = "pactl" application.language = "C" window.x11.display = ":0" application.process.machine_id = "f0e3e8c344634ef18f7d484b21864e7d" application.process.session_id = "2" config.name = "pipewire-pulse.conf" cpu.max-align = "32" default.clock.rate = "48000" default.clock.allowed-rates = "[ 48000 ]" default.clock.quantum = "1024" default.clock.min-quantum = "32" default.clock.max-quantum = "8192" default.video.width = "640" default.video.height = "480" default.video.rate.num = "25" default.video.rate.denom = "1" log.level = "2" clock.power-of-two-quantum = "true" link.max-buffers = "64" mem.warn-mlock = "false" mem.allow-mlock = "true" core.version = "0.3.34" core.name = "pipewire-joe-1938" pipewire.access = "unrestricted" Card #40 Name: alsa_card.pci-0000_02_02.0 Driver: alsa Owner Module: n/a Properties: device.enum.api = "udev" device.api = "alsa" media.class = "Audio/Device" api.alsa.path = "hw:0" api.alsa.card = "0" api.alsa.card.name = "Ensoniq AudioPCI" api.alsa.card.longname = "Ensoniq AudioPCI ENS1371 at 0x1000, irq 16" device.plugged.usec = "6647823" device.bus_path = "pci-0000:02:02.0" device.sysfs.path = "/sys/devices/pci0000:00/0000:00:11.0/0000:02:02.0/sound/card0" device.bus = "pci" device.subsystem = "sound" device.vendor.id = "4724" device.vendor.name = "Ensoniq" device.product.id = "4977" device.product.name = "ES1371/ES1373 / Creative Labs CT2518 (Audio PCI 64V/128/5200 / Creative CT4810/CT5803/CT5806 [Sound Blaster PCI])" device.name = "alsa_card.pci-0000_02_02.0" device.description = "ES1371/ES1373 / Creative Labs CT2518 (Audio PCI 64V/128/5200 / Creative CT4810/CT5803/CT5806 [Sound Blaster PCI])" device.nick = "Ensoniq AudioPCI" device.icon_name = "audio-card-pci" api.alsa.use-acp = "true" api.acp.auto-profile = "false" api.acp.auto-port = "false" api.dbus.ReserveDevice1 = "Audio0" factory.id = "14" client.id = "31" object.id = "40" object.path = "alsa:pcm:0" alsa.card = "0" alsa.card_name = "Ensoniq AudioPCI" alsa.long_card_name = "Ensoniq AudioPCI ENS1371 at 0x1000, irq 16" alsa.driver_name = "snd_ens1371" device.string = "0" Profiles: off: Off (sinks: 0, sources: 0, priority: 0, available: yes) output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority: 6565, available: yes) output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 6500, available: yes) input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 65, available: yes) pro-audio: Pro Audio (sinks: 2, sources: 1, priority: 1, available: yes) Active Profile: output:analog-stereo Ports: analog-input-mic: Microphone (type: Mic, priority: 8700, latency offset: 0 usec, availability unknown) Properties: port.type = "mic" device.icon_name = "audio-input-microphone" card.profile.port = "0" Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo analog-input-linein: Line In (type: Line, priority: 8100, latency offset: 0 usec, availability unknown) Properties: port.type = "line" card.profile.port = "1" Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo analog-input-aux: Analog Input (type: Analog, priority: 8000, latency offset: 0 usec, availability unknown) Properties: port.type = "analog" card.profile.port = "2" Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo analog-input-video: Video (type: Video, priority: 7000, latency offset: 0 usec, availability unknown) Properties: port.type = "video" card.profile.port = "3" Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo analog-output: Analog Output (type: Analog, priority: 9900, latency offset: 0 usec, availability unknown) Properties: port.type = "analog" card.profile.port = "4" Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo ________________
cat /etc/pulse/daemon.conf
cat /etc/pulse/client.conf # This file is part of PulseAudio. # # PulseAudio is free software; you can redistribute it and/or modify # it under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # PulseAudio is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
## Configuration file for PulseAudio clients. See pulse-client.conf(5) for ## more information. Default values are commented out. Use either ; or # for ## commenting. ; default-sink = ; default-source = ; default-server = ; default-dbus-server = ; autospawn = yes ; daemon-binary = /usr/bin/pulseaudio ; extra-arguments = --log-target=syslog ; cookie-file = ; enable-shm = yes ; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB ; auto-connect-localhost = no ; auto-connect-display = no ________________
cat /etc/pulse/default.pa
cat /etc/pulse/system.pa
ls -alt /dev/snd/* crw-rw----+ 1 root audio 116, 2 Sep 2 13:17 /dev/snd/pcmC0D0p crw-rw----+ 1 root audio 116, 3 Sep 2 12:46 /dev/snd/pcmC0D0c crw-rw----+ 1 root audio 116, 4 Sep 2 12:46 /dev/snd/pcmC0D1p crw-rw----+ 1 root audio 116, 1 Sep 2 12:45 /dev/snd/seq crw-rw----+ 1 root audio 116, 6 Sep 2 12:45 /dev/snd/controlC0 crw-rw----+ 1 root audio 116, 5 Sep 2 12:45 /dev/snd/midiC0D0 crw-rw----+ 1 root audio 116, 33 Sep 2 12:45 /dev/snd/timer
/dev/snd/by-path: total 0 drwxr-xr-x 2 root root 60 Sep 2 12:45 . drwxr-xr-x 3 root root 200 Sep 2 12:45 .. lrwxrwxrwx 1 root root 12 Sep 2 12:45 pci-0000:02:02.0 -> ../controlC0 ________________
lsof /dev/snd/* COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME pipewire 1936 joe 47u CHR 116,1 0t0 400 /dev/snd/seq pipewire 1936 joe 48u CHR 116,1 0t0 400 /dev/snd/seq pipewire- 1937 joe 25u CHR 116,6 0t0 470 /dev/snd/controlC0
jacks_do card=0
aplay -L null Discard all samples (playback) or generate zero samples (capture) sysdefault Default Audio Device iec958 IEC958 (S/PDIF) Digital Audio Output speexrate Rate Converter Plugin Using Speex Resampler pipewire PipeWire Sound Server upmix Plugin for channel upmix (4,6,8) default Default ALSA Output (currently PipeWire Media Server) sysdefault:CARD=AudioPCI Ensoniq AudioPCI, ES1371 DAC2/ADC Default Audio Device front:CARD=AudioPCI,DEV=0 Ensoniq AudioPCI, ES1371 DAC2/ADC Front output / input rear:CARD=AudioPCI,DEV=0 Ensoniq AudioPCI, ES1371 DAC2/ADC Rear speakers surround40:CARD=AudioPCI,DEV=0 Ensoniq AudioPCI, ES1371 DAC2/ADC 4.0 Surround output to Front and Rear speakers iec958:CARD=AudioPCI,DEV=0 Ensoniq AudioPCI, ES1371 DAC2/ADC IEC958 (S/PDIF) Digital Audio Output
arecord -L null Discard all samples (playback) or generate zero samples (capture) sysdefault Default Audio Device iec958 IEC958 (S/PDIF) Digital Audio Output speexrate Rate Converter Plugin Using Speex Resampler pipewire PipeWire Sound Server upmix Plugin for channel upmix (4,6,8) default Default ALSA Output (currently PipeWire Media Server) sysdefault:CARD=AudioPCI Ensoniq AudioPCI, ES1371 DAC2/ADC Default Audio Device front:CARD=AudioPCI,DEV=0 Ensoniq AudioPCI, ES1371 DAC2/ADC Front output / input rear:CARD=AudioPCI,DEV=0 Ensoniq AudioPCI, ES1371 DAC2/ADC Rear speakers
alsa_info_do upload=true&script=true&cardinfo= !!################################ !!ALSA Information Script v 0.5.0 !!################################
!!Script ran on: Thu Sep 2 17:47:30 UTC 2021 !!Linux Distribution !!------------------ Welcome to openSUSE Tumbleweed 20210831 - Kernel \r (\l). NAME="openSUSE Tumbleweed" ID="opensuse-tumbleweed" ID_LIKE="opensuse suse" PRETTY_NAME="openSUSE Tumbleweed" CPE_NAME="cpe:/o:opensuse:tumbleweed:20210831" BUG_REPORT_URL="https://bugs.opensuse.org" HOME_URL="https://www.opensuse.org/" DOCUMENTATION_URL="https://en.opensuse.org/Portal:Tumbleweed" !!DMI Information !!--------------- Manufacturer: VMware, Inc. Product Name: VMware7,1 Product Version: None Firmware Version: VMW71.00V.16722896.B64.2008100651 System SKU: Board Vendor: Intel Corporation Board Name: 440BX Desktop Reference Platform !!ACPI Device Status Information !!--------------- /sys/bus/acpi/devices/ACPI0003:00/status 15 /sys/bus/acpi/devices/LNXCPU:00/status 15 /sys/bus/acpi/devices/LNXCPU:01/status 15 /sys/bus/acpi/devices/LNXCPU:02/status 15 /sys/bus/acpi/devices/LNXCPU:03/status 15 /sys/bus/acpi/devices/PNP0103:00/status 15 /sys/bus/acpi/devices/PNP0501:20/status 15 /sys/bus/acpi/devices/PNP0C02:02/status 15 /sys/bus/acpi/devices/PNP0C02:03/status 15 /sys/bus/acpi/devices/PNP0C0F:00/status 9 /sys/bus/acpi/devices/PNP0C0F:01/status 9 /sys/bus/acpi/devices/PNP0C0F:02/status 9 /sys/bus/acpi/devices/PNP0C0F:03/status 9 /sys/bus/acpi/devices/device:06/status 15 /sys/bus/acpi/devices/device:07/status 15 /sys/bus/acpi/devices/device:08/status 15 /sys/bus/acpi/devices/device:09/status 15 /sys/bus/acpi/devices/device:27/status 15 !!Kernel Information !!------------------ Kernel release: 5.13.13-1-default Operating System: GNU/Linux Architecture: x86_64 Processor: x86_64 SMP Enabled: Yes !!ALSA Version !!------------ Driver version: k5.13.13-1-default Library version: Utilities version: 1.2.5.1 !!Loaded ALSA modules !!------------------- snd_ens1371 (card 0) !!Sound Servers on this system !!---------------------------- PipeWire: Installed - Yes (/usr/bin/pipewire) Running - Yes No sound servers found. !!Soundcards recognised by ALSA !!----------------------------- 0 [AudioPCI ]: ENS1371 - Ensoniq AudioPCI Ensoniq AudioPCI ENS1371 at 0x1000, irq 16 !!PCI Soundcards installed in the system !!-------------------------------------- 02:02.0 Multimedia audio controller [0401]: Ensoniq ES1371/ES1373 / Creative Labs CT2518 [1274:1371] (rev 02) DeviceName: sound !!Loaded sound module options !!--------------------------- !!Module: snd_ens1371 enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 lineio : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 spdif : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 !!Sysfs card info !!--------------- !!Card: /sys/class/sound/card0 Driver: /sys/bus/pci/drivers/snd_ens1371 Tree: /sys/class/sound/card0 |-- controlC0 | |-- dev | |-- device -> ../../card0 | |-- power | |-- subsystem -> ../../../../../../../class/sound | `-- uevent |-- device -> ../../../0000:02:02.0 |-- dmmidi | |-- dev | |-- device -> ../../card0 | |-- power | |-- subsystem -> ../../../../../../../class/sound | `-- uevent |-- id |-- midi | |-- dev | |-- device -> ../../card0 | |-- power | |-- subsystem -> ../../../../../../../class/sound | `-- uevent |-- midiC0D0 | |-- dev | |-- device -> ../../card0 | |-- power | |-- subsystem -> ../../../../../../../class/sound | `-- uevent |-- number |-- pcmC0D0c | |-- dev | |-- device -> ../../card0 | |-- pcm_class | |-- power | |-- subsystem -> ../../../../../../../class/sound | `-- uevent |-- pcmC0D0p | |-- dev | |-- device -> ../../card0 | |-- pcm_class | |-- power | |-- subsystem -> ../../../../../../../class/sound | `-- uevent |-- pcmC0D1p | |-- dev | |-- device -> ../../card0 | |-- pcm_class | |-- power | |-- subsystem -> ../../../../../../../class/sound | `-- uevent |-- power | |-- async | |-- autosuspend_delay_ms | |-- control | |-- runtime_active_kids | |-- runtime_active_time | |-- runtime_enabled | |-- runtime_status | |-- runtime_suspended_time | `-- runtime_usage |-- seq-midi-0-0 | |-- driver -> ../../../../../../../bus/snd_seq/drivers/snd_seq_midi | |-- power | |-- subsystem -> ../../../../../../../bus/snd_seq | `-- uevent |-- subsystem -> ../../../../../../class/sound `-- uevent !!AC97 Codec information !!---------------------- --startcollapse-- 0-0/0: Cirrus Logic CS4297A rev 3 PCI Subsys Vendor: 0x1274 PCI Subsys Device: 0x1371 Flags: 4 Capabilities : DAC resolution : 16-bit ADC resolution : 16-bit 3D enhancement : No 3D Stereo Enhancement Current setup Mic gain : +0dB [+0dB] POP path : pre 3D Sim. stereo : off 3D enhancement : off Loudness : off Mono output : MIX Mic select : Mic1 ADC/DAC loopback : off 0:00 = 0000 0:02 = 0080 0:04 = 0000 0:06 = 0000 0:08 = 0000 0:0a = 0000 0:0c = 3fbf 0:0e = 3fbf 0:10 = 3fbf 0:12 = 1090 0:14 = 3fbf 0:16 = 3fbf 0:18 = 0080 0:1a = 0000 0:1c = 0909 0:1e = 0000 0:20 = 0000 0:22 = 0000 0:24 = 0000 0:26 = 000f 0:28 = 0000 0:2a = 0000 0:2c = 0000 0:2e = 0000 0:30 = 0000 0:32 = 0000 0:34 = 0000 0:36 = 0000 0:38 = 0000 0:3a = 0000 0:3c = 0000 0:3e = 0000 0:40 = 0000 0:42 = 0000 0:44 = 0000 0:46 = 0000 0:48 = 0000 0:4a = 0000 0:4c = 0000 0:4e = 0000 0:50 = 0000 0:52 = 0000 0:54 = 0000 0:56 = 0000 0:58 = 0000 0:5a = 0000 0:5c = 0000 0:5e = 0000 0:60 = 0000 0:62 = 0000 0:64 = 0000 0:66 = 0000 0:68 = 0000 0:6a = 0000 0:6c = 0000 0:6e = 0000 0:70 = 0000 0:72 = 0000 0:74 = 0000 0:76 = 0000 0:78 = 0000 0:7a = 0000 0:7c = 4352 0:7e = 5913 --endcollapse-- !!ALSA Device nodes !!----------------- crw-rw----+ 1 root audio 116, 6 Sep 2 12:45 /dev/snd/controlC0 crw-rw----+ 1 root audio 116, 5 Sep 2 12:45 /dev/snd/midiC0D0 crw-rw----+ 1 root audio 116, 3 Sep 2 12:46 /dev/snd/pcmC0D0c crw-rw----+ 1 root audio 116, 2 Sep 2 13:17 /dev/snd/pcmC0D0p crw-rw----+ 1 root audio 116, 4 Sep 2 12:46 /dev/snd/pcmC0D1p crw-rw----+ 1 root audio 116, 1 Sep 2 12:45 /dev/snd/seq crw-rw----+ 1 root audio 116, 33 Sep 2 12:45 /dev/snd/timer /dev/snd/by-path: total 0 drwxr-xr-x 2 root root 60 Sep 2 12:45 . drwxr-xr-x 3 root root 200 Sep 2 12:45 .. lrwxrwxrwx 1 root root 12 Sep 2 12:45 pci-0000:02:02.0 -> ../controlC0 !!Aplay/Arecord output !!-------------------- APLAY **** List of PLAYBACK Hardware Devices **** card 0: AudioPCI [Ensoniq AudioPCI], device 0: ES1371/1 [ES1371 DAC2/ADC] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: AudioPCI [Ensoniq AudioPCI], device 1: ES1371/2 [ES1371 DAC1] Subdevices: 1/1 Subdevice #0: subdevice #0 ARECORD **** List of CAPTURE Hardware Devices **** card 0: AudioPCI [Ensoniq AudioPCI], device 0: ES1371/1 [ES1371 DAC2/ADC] Subdevices: 1/1 Subdevice #0: subdevice #0 !!Amixer output !!------------- !!-------Mixer controls for card AudioPCI Card sysdefault:0 'AudioPCI'/'Ensoniq AudioPCI ENS1371 at 0x1000, irq 16' Mixer name : 'Cirrus Logic CS4297A rev 3' Components : 'AC97a:43525913' Controls : 26 Simple ctrls : 13 Simple mixer control 'Master',0 Capabilities: pvolume pswitch pswitch-joined Playback channels: Front Left - Front Right Limits: Playback 0 - 63 Mono: Front Left: Playback 63 [100%] [0.00dB] [on] Front Right: Playback 63 [100%] [0.00dB] [on] Simple mixer control 'PCM',0 Capabilities: pvolume pswitch pswitch-joined Playback channels: Front Left - Front Right Limits: Playback 0 - 63 Mono: Front Left: Playback 63 [100%] [60.00dB] [on] Front Right: Playback 63 [100%] [60.00dB] [on] Simple mixer control 'Line',0 Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive Capture exclusive group: 0 Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: Playback 0 - 63 Front Left: Playback 0 [0%] [-34.50dB] [on] Capture [off] Front Right: Playback 0 [0%] [-34.50dB] [on] Capture [off] Simple mixer control 'CD',0 Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive Capture exclusive group: 0 Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: Playback 0 - 63 Front Left: Playback 47 [75%] [36.00dB] [on] Capture [off] Front Right: Playback 47 [75%] [36.00dB] [on] Capture [off] Simple mixer control 'Mic',0 Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive Capture exclusive group: 0 Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: Playback 0 - 63 Front Left: Playback 0 [0%] [-34.50dB] [on] Capture [on] Front Right: Playback 0 [0%] [-34.50dB] [on] Capture [on] Simple mixer control 'Mic Boost (+20dB)',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [off] Simple mixer control 'Video',0 Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive Capture exclusive group: 0 Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: Playback 0 - 63 Front Left: Playback 0 [0%] [-34.50dB] [on] Capture [off] Front Right: Playback 0 [0%] [-34.50dB] [on] Capture [off] Simple mixer control 'Phone',0 Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive Capture exclusive group: 0 Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: Playback 0 - 63 Front Left: Playback 0 [0%] [-34.50dB] [on] Capture [off] Front Right: Playback 0 [0%] [-34.50dB] [on] Capture [off] Simple mixer control 'IEC958',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [off] Simple mixer control 'Aux',0 Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive Capture exclusive group: 0 Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: Playback 0 - 63 Front Left: Playback 0 [0%] [-34.50dB] [on] Capture [off] Front Right: Playback 0 [0%] [-34.50dB] [on] Capture [off] Simple mixer control 'Capture',0 Capabilities: cvolume cswitch cswitch-joined Capture channels: Front Left - Front Right Limits: Capture 0 - 15 Front Left: Capture 9 [60%] [13.50dB] [on] Front Right: Capture 9 [60%] [13.50dB] [on] Simple mixer control 'Mix',0 Capabilities: cswitch cswitch-exclusive Capture exclusive group: 0 Capture channels: Front Left - Front Right Front Left: Capture [off] Front Right: Capture [off] Simple mixer control 'Mix Mono',0 Capabilities: cswitch cswitch-exclusive Capture exclusive group: 0 Capture channels: Front Left - Front Right Front Left: Capture [off] Front Right: Capture [off] !!Alsactl output !!-------------- --startcollapse-- state.AudioPCI { control.1 { iface MIXER name 'Master Playback Switch' value true comment { access 'read write' type BOOLEAN count 1 } } control.2 { iface MIXER name 'Master Playback Volume' value.0 63 value.1 63 comment { access 'read write' type INTEGER count 2 range '0 - 63' dbmin -9450 dbmax 0 dbvalue.0 0 dbvalue.1 0 } } control.3 { iface MIXER name 'Phone Playback Switch' value true comment { access 'read write' type BOOLEAN count 1 } } control.4 { iface MIXER name 'Phone Playback Volume' value.0 0 value.1 0 comment { access 'read write' type INTEGER count 2 range '0 - 63' dbmin -3450 dbmax 6000 dbvalue.0 -3450 dbvalue.1 -3450 } } control.5 { iface MIXER name 'Mic Playback Switch' value true comment { access 'read write' type BOOLEAN count 1 } } control.6 { iface MIXER name 'Mic Playback Volume' value.0 0 value.1 0 comment { access 'read write' type INTEGER count 2 range '0 - 63' dbmin -3450 dbmax 6000 dbvalue.0 -3450 dbvalue.1 -3450 } } control.7 { iface MIXER name 'Mic Boost (+20dB)' value false comment { access 'read write' type BOOLEAN count 1 } } control.8 { iface MIXER name 'Line Playback Switch' value true comment { access 'read write' type BOOLEAN count 1 } } control.9 { iface MIXER name 'Line Playback Volume' value.0 0 value.1 0 comment { access 'read write' type INTEGER count 2 range '0 - 63' dbmin -3450 dbmax 6000 dbvalue.0 -3450 dbvalue.1 -3450 } } control.10 { iface MIXER name 'CD Playback Switch' value true comment { access 'read write' type BOOLEAN count 1 } } control.11 { iface MIXER name 'CD Playback Volume' value.0 47 value.1 47 comment { access 'read write' type INTEGER count 2 range '0 - 63' dbmin -3450 dbmax 6000 dbvalue.0 3600 dbvalue.1 3600 } } control.12 { iface MIXER name 'Video Playback Switch' value true comment { access 'read write' type BOOLEAN count 1 } } control.13 { iface MIXER name 'Video Playback Volume' value.0 0 value.1 0 comment { access 'read write' type INTEGER count 2 range '0 - 63' dbmin -3450 dbmax 6000 dbvalue.0 -3450 dbvalue.1 -3450 } } control.14 { iface MIXER name 'Aux Playback Switch' value true comment { access 'read write' type BOOLEAN count 1 } } control.15 { iface MIXER name 'Aux Playback Volume' value.0 0 value.1 0 comment { access 'read write' type INTEGER count 2 range '0 - 63' dbmin -3450 dbmax 6000 dbvalue.0 -3450 dbvalue.1 -3450 } } control.16 { iface MIXER name 'PCM Playback Switch' value true comment { access 'read write' type BOOLEAN count 1 } } control.17 { iface MIXER name 'PCM Playback Volume' value.0 63 value.1 63 comment { access 'read write' type INTEGER count 2 range '0 - 63' dbmin -3450 dbmax 6000 dbvalue.0 6000 dbvalue.1 6000 } } control.18 { iface MIXER name 'Capture Source' value.0 Mic value.1 Mic comment { access 'read write' type ENUMERATED count 2 item.0 Mic item.1 CD item.2 Video item.3 Aux item.4 Line item.5 Mix item.6 'Mix Mono' item.7 Phone } } control.19 { iface MIXER name 'Capture Switch' value true comment { access 'read write' type BOOLEAN count 1 } } control.20 { iface MIXER name 'Capture Volume' value.0 9 value.1 9 comment { access 'read write' type INTEGER count 2 range '0 - 15' dbmin 0 dbmax 2250 dbvalue.0 1350 dbvalue.1 1350 } } control.21 { iface MIXER name 'IEC958 Playback Con Mask' value '0fff000f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access read type IEC958 count 1 } } control.22 { iface MIXER name 'IEC958 Playback Pro Mask' value cf00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 comment { access read type IEC958 count 1 } } control.23 { iface MIXER name 'IEC958 Playback Default' value '0082000200000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access 'read write' type IEC958 count 1 } } control.24 { iface MIXER name 'IEC958 Playback Switch' value false comment { access 'read write' type BOOLEAN count 1 } } control.25 { iface PCM name 'Playback Channel Map' value.0 0 value.1 0 comment { access read type INTEGER count 2 range '0 - 36' } } control.26 { iface PCM device 1 name 'Playback Channel Map' value.0 0 value.1 0 comment { access read type INTEGER count 2 range '0 - 36' } } } --endcollapse-- !!All Loaded Modules !!------------------ ac ac97_bus aesni_intel af_packet ata_generic ata_piix binfmt_misc blake2b_generic bpfilter btrfs button cdrom cec cifs cmac configfs crc32_pclmul crc32c_intel crct10dif_pclmul cryptd crypto_simd dm_mod dm_multipath dns_resolver drm drm_kms_helper e1000 ebtable_broute ebtable_filter ebtable_nat ebtables efi_pstore efivarfs ehci_hcd ehci_pci ext4 fat fb_sys_fops fscache fuse ghash_clmulni_intel hid_generic i2c_piix4 intel_rapl_common intel_rapl_msr ip6_tables ip6table_filter ip6table_mangle ip6table_nat ip6table_raw ip6table_security ip_set ip_tables iptable_filter iptable_mangle iptable_nat iptable_raw iptable_security irqbypass jbd2 joydev kvm kvm_intel libarc4 libcrc32c libdes mbcache md4 mptbase mptctl mptscsih mptspi msr netfs nf_conntrack nf_conntrack_broadcast nf_conntrack_netbios_ns nf_defrag_ipv4 nf_defrag_ipv6 nf_nat nf_reject_ipv4 nf_reject_ipv6 nf_tables nfnetlink nft_chain_nat nft_ct nft_fib nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_objref nft_reject nft_reject_inet nls_cp437 nls_iso8859_1 nls_utf8 pcspkr raid6_pq rc_core rfkill scsi_dh_alua scsi_dh_emc scsi_dh_rdac scsi_transport_spi serio_raw sg sha512_generic sha512_ssse3 snd snd_ac97_codec snd_ens1371 snd_hrtimer snd_pcm snd_rawmidi snd_seq snd_seq_device snd_seq_dummy snd_seq_midi snd_seq_midi_event snd_timer soundcore sr_mod syscopyarea sysfillrect sysimgblt tiny_power_button ttm uhci_hcd usbcore usbhid vfat vmw_balloon vmw_vmci vmw_vsock_virtio_transport_common vmw_vsock_vmci_transport vmwgfx vsock vsock_loopback x_tables xhci_hcd xhci_pci xhci_pci_renesas xor !!ALSA/HDA dmesg !!-------------- [ 0.299302] ACPI: Added _OSI(Linux-Dell-Video) [ 0.299303] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.299304] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) -- [ 5.553254] pstore: Only enable efi based pstore when you know what you are doing [ 5.791336] snd_ens1371 0000:02:02.0: enabling device (0000 -> 0001) [ 6.322529] NET: Registered protocol family 40 !!Packages installed !!-------------------- alsa-plugins-speexrate-1.2.5-1.1.x86_64 alsa-plugins-1.2.5-1.1.x86_64 alsa-oss-32bit-1.1.8-4.1.x86_64 alsa-plugins-pulse-32bit-1.2.5-1.1.x86_64 alsa-plugins-upmix-1.2.5-1.1.x86_64 alsa-oss-1.1.8-4.1.x86_64 alsa-utils-1.2.5.1-2.1.x86_64 alsa-ucm-conf-1.2.5.1-1.1.noarch Still looking for the solution...
Am 02.09.2021 um 19:49 schrieb Joe Salmeri:
Mathias,
Any luck getting it to work?
... yep. after unloading the driver, rm /var/lib/alsa/asound.state && systemctl reboot. o.0 that was all it needed here... Cheers MH -- Mathias Homann Mathias.Homann@openSUSE.org Jabber (XMPP): lemmy@tuxonline.tech IRC: [Lemmy] on freenode and ircnet (bouncer active) telegram: https://telegram.me/lemmy98 keybase: https://keybase.io/lemmy gpg key fingerprint: 8029 2240 F4DD 7776 E7D2 C042 6B8E 029E 13F2 C102
Mathias, Hmmm... that didn't work for me but I think I got to the root of the issue. There was in issue in one of the updates after 210200805 (probably 20210820 since that was the next one I installed) that mistakenly installed the pattern microos-desktop-common which was supposedly fixed the next day. It looks like that changed from using pulseaudio to pipewire. What I did to fix the problem was to reinstall pulseaudio. When I did that zypper responded with Problem: the installed pipewire-pulseaudio-0.3.34-1.1.x86_64 conflicts with 'pulseaudio' provided by the to be installed pulseaudio-15.0-2.1.x86_64 Solution 1: Following actions will be done: deinstallation of pipewire-pulseaudio-0.3.34-1.1.x86_64 deinstallation of patterns-microos-desktop-common-5.0-36.1.x86_64 Solution 2: do not install pulseaudio-15.0-2.1.x86_64 Choosing option 1 removed the pattern that TW erroneously installed and after rebooting audio was working again.
Am Mittwoch, 1. September 2021, 22:57:51 CEST schrieb Bengt Gördén:
On 2021-09-01 10:27, Mathias Homann wrote:
Any ideas? What info do you guys need to help figuring this out?
Not that I'm sure I can help but a starting point would be some more info from alsa/pulseaudio.
run pa-info
or even better LANG=C pa-info | susepaste -t "pa-info" -e "10080"
https://paste.opensuse.org/30408051 Cheers MH -- Mathias Homann Mathias.Homann@openSUSE.org OBS: lemmy04 Jabber (XMPP): lemmy@tuxonline.tech IRC: [Lemmy] on freenode and ircnet (bouncer active) telegram: https://telegram.me/lemmy98 keybase: https://keybase.io/lemmy gpg key fingerprint: 8029 2240 F4DD 7776 E7D2 C042 6B8E 029E 13F2 C102
Mathias, For me sound stopped working in my TW virtual machine (which runs Win 10) after I updated from 20210805 to 20210820. I figured it would be fixed quickly but I have since updated to 20210826 and 20210827 and it is still now working. Interestingly, if I boot the host machine to TW then when I updated it from 20210805 to each of those versions sound continued to work on the host machine. Sound works fine when the host is booted to Win10 and sound works fine in other VMs, it is just the TW vm that is broke. If I boot the TW vm to the 20210805 read/only snapshot then sound works for it again but as soon as I boot back to 20210820, 20210826, or 20210827 then sound stops working again. I'm still looking for a solution.... Joe
participants (5)
-
Bengt Gördén -
Joe Salmeri -
Konstantin Voinov -
Mathias Homann -
Mathias Homann