[opensuse-factory] Hauppauge WinTV-HVR 1300 (hybrid) doesn't work in RC1
Hi, Yast detects it as CX23880/1/2/3 PCI Video and Audio Decoder. It didn't work. Then I manually selected the correct one. Tuner can not be edited in yast (it says: no tuner is available for the selected card). It doesn't find any stations at all (Spain, pal-bg). I try kdetv, same thing: no stations, neither manually not automatically. I can see the video (composite input), but no sound. I twiddled all volume controls I could find in the mixer to no avail. -- Cheers, Carlos E. R. (from RC1) --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
Carlos E. R. wrote:
Hi,
Yast detects it as CX23880/1/2/3 PCI Video and Audio Decoder. It didn't work. Then I manually selected the correct one.
Tuner can not be edited in yast (it says: no tuner is available for the selected card).
It doesn't find any stations at all (Spain, pal-bg). I try kdetv, same thing: no stations, neither manually not automatically.
I can see the video (composite input), but no sound. I twiddled all volume controls I could find in the mixer to no avail.
Can this log entries be related to it? Sep 23 21:36:54 minas-morgul kernel: cx88[0]/2-bb: Firmware and/or mailbox pointer not initialized or corrupted Sep 23 21:36:55 minas-morgul kernel: cx88[0]/2-bb: ERROR: Hotplug firmware request failed (v4l-cx2341x-enc.fw). Sep 23 21:36:55 minas-morgul kernel: cx88[0]/2-bb: Please fix your hotplug setup, the board will not work without firmware loaded! Sep 23 21:36:59 minas-morgul kernel: cx22702_readreg: readreg error (ret == -121) Sep 23 21:37:01 minas-morgul kernel: cx22702_writereg: writereg error (reg == 0x0d, val == 0x00, ret == -121) Sep 23 21:37:01 minas-morgul kernel: cx22702_readreg: readreg error (ret == -121) Sep 23 21:37:01 minas-morgul kernel: cx22702_writereg: writereg error (reg == 0x0d, val == 0x01, ret == -121) Sep 23 21:37:02 minas-morgul kernel: cx88[0]/2-bb: Firmware and/or mailbox pointer not initialized or corrupted Sep 23 21:37:02 minas-morgul kernel: cx88[0]/2-bb: ERROR: Hotplug firmware request failed (v4l-cx2341x-enc.fw). Sep 23 21:37:02 minas-morgul kernel: cx88[0]/2-bb: Please fix your hotplug setup, the board will not work without firmware loaded! Does that TV card need to load firmware? How do I know and where do I get it from? Sep 23 23:09:00 minas-morgul kernel: cx88[0]: video y / packed - dma channel status dump Sep 23 23:09:00 minas-morgul kernel: cx88[0]: cmds: initial risc: 0x2eca1000 Sep 23 23:09:00 minas-morgul kernel: cx88[0]: cmds: cdt base : 0x00180440 Sep 23 23:09:00 minas-morgul kernel: cx88[0]: cmds: cdt size : 0x0000000c Sep 23 23:09:00 minas-morgul kernel: cx88[0]: cmds: iq base : 0x00180400 Sep 23 23:09:00 minas-morgul kernel: cx88[0]: cmds: iq size : 0x00000010 Sep 23 23:09:00 minas-morgul kernel: cx88[0]: cmds: risc pc : 0x2ec04034 Sep 23 23:09:00 minas-morgul kernel: cx88[0]: cmds: iq wr ptr : 0x0000010d Sep 23 23:09:00 minas-morgul kernel: cx88[0]: cmds: iq rd ptr : 0x00000101 Sep 23 23:09:00 minas-morgul kernel: cx88[0]: cmds: cdt current : 0x00000448 Sep 23 23:09:00 minas-morgul kernel: cx88[0]: cmds: pci target : 0x2ee00210 Sep 23 23:09:00 minas-morgul kernel: cx88[0]: cmds: line / byte : 0x02950000 Sep 23 23:09:00 minas-morgul kernel: cx88[0]: risc0: 0x80008000 [ sync resync count=0 ] Sep 23 23:09:00 minas-morgul kernel: cx88[0]: risc1: 0x1c0002e8 [ write sol eol count=744 ] Sep 23 23:09:00 minas-morgul kernel: cx88[0]: risc2: 0x2ec36000 [ skip sol eol irq2 23 22 cnt1 cnt0 14 13 count=0 ] Sep 23 23:09:00 minas-morgul kernel: cx88[0]: risc3: 0x1c0002e8 [ write sol eol count=744 ] Sep 23 23:09:00 minas-morgul kernel: cx88[0]: iq 0: 0x80008000 [ sync resync count=0 ] Sep 23 23:09:00 minas-morgul kernel: cx88[0]: iq 1: 0x1c0002e8 [ write sol eol count=744 ] Sep 23 23:09:00 minas-morgul kernel: cx88[0]: iq 2: 0x2ec36000 [ arg #1 ] Sep 23 23:09:00 minas-morgul kernel: cx88[0]: iq 3: 0x1c0002e8 [ write sol eol count=744 ] Sep 23 23:09:00 minas-morgul kernel: cx88[0]: iq 4: 0x2ec365d0 [ arg #1 ] Sep 23 23:09:00 minas-morgul kernel: cx88[0]: iq 5: 0x1c0002e8 [ write sol eol count=744 ] Sep 23 23:09:00 minas-morgul kernel: cx88[0]: iq 6: 0x2ec36ba0 [ arg #1 ] Sep 23 23:09:00 minas-morgul kernel: cx88[0]: iq 7: 0x1c0002e8 [ write sol eol count=744 ] Sep 23 23:09:00 minas-morgul kernel: cx88[0]: iq 8: 0x2ec35170 [ arg #1 ] Sep 23 23:09:00 minas-morgul kernel: cx88[0]: iq 9: 0x1c0002e8 [ write sol eol count=744 ] Sep 23 23:09:00 minas-morgul kernel: cx88[0]: iq a: 0x2ec35740 [ arg #1 ] Sep 23 23:09:00 minas-morgul kernel: cx88[0]: iq b: 0x1c0002e8 [ write sol eol count=744 ] Sep 23 23:09:00 minas-morgul kernel: cx88[0]: iq c: 0x2ec35d10 [ arg #1 ] Sep 23 23:09:00 minas-morgul kernel: cx88[0]: iq d: 0x14000210 [ write eol count=528 ] Sep 23 23:09:00 minas-morgul kernel: cx88[0]: iq e: 0x2ee00000 [ arg #1 ] Sep 23 23:09:00 minas-morgul kernel: cx88[0]: iq f: 0x71010000 [ jump irq1 cnt0 count=0 ] Sep 23 23:09:00 minas-morgul kernel: cx88[0]: iq 10: 0x00180c00 [ arg #1 ] Sep 23 23:09:00 minas-morgul kernel: cx88[0]: fifo: 0x00180c00 -> 0x183400 Sep 23 23:09:00 minas-morgul kernel: cx88[0]: ctrl: 0x00180400 -> 0x180460 Sep 23 23:09:00 minas-morgul kernel: cx88[0]: ptr1_reg: 0x00181238 Sep 23 23:09:00 minas-morgul kernel: cx88[0]: ptr2_reg: 0x00180468 Sep 23 23:09:00 minas-morgul kernel: cx88[0]: cnt1_reg: 0x00000022 Sep 23 23:09:00 minas-morgul kernel: cx88[0]: cnt2_reg: 0x00000000 Sep 23 23:09:00 minas-morgul kernel: cx88[0]/0: [efa783c0/0] timeout - dma=0x2ec04000 Sep 23 23:09:00 minas-morgul kernel: cx88[0]/0: [efa784c0/1] timeout - dma=0x2eca1000 Sep 23 23:09:00 minas-morgul kernel: cx88[0]/0: [efa785c0/2] timeout - dma=0x2ee01000 -- Cheers, Carlos E. R. (from RC1) --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 The Monday 2007-09-24 at 00:25 +0200, Carlos E. R. wrote:
Yast detects it as CX23880/1/2/3 PCI Video and Audio Decoder. It didn't work. Then I manually selected the correct one.
Tuner can not be edited in yast (it says: no tuner is available for the selected card).
It doesn't find any stations at all (Spain, pal-bg). I try kdetv, same thing: no stations, neither manually not automatically.
I can see the video (composite input), but no sound. I twiddled all volume controls I could find in the mixer to no avail.
Can this log entries be related to it?
Sep 23 21:36:54 minas-morgul kernel: cx88[0]/2-bb: Firmware and/or mailbox pointer not initialized or corrupted Sep 23 21:36:55 minas-morgul kernel: cx88[0]/2-bb: ERROR: Hotplug firmware request failed (v4l-cx2341x-enc.fw). Sep 23 21:36:55 minas-morgul kernel: cx88[0]/2-bb: Please fix your hotplug setup, the board will not work without firmware loaded!
Looking in http://ivtvdriver.org/index.php/Firmware, it seems the firmware is hidden under a directory of the card CD, with another name, so they can simply be copied over to '/lib/firmware/' and renamed: 376836 Jan 17 2005 HcwFalcn.rom --> v4l-cx2341x-enc.fw 12282 Jul 1 2005 HcwMakoC.ROM --> v4l-cx25840.fw 14264 Apr 20 2005 HcwMakoB.ROM ????? The kernel finds it: Sep 26 03:08:50 minas-morgul kernel: cx88[0]/2-bb: Firmware and/or mailbox pointer not initialized or corrupted Sep 26 03:08:58 minas-morgul kernel: cx88[0]/2-bb: Firmware upload successful. Sep 26 03:08:58 minas-morgul kernel: cx88[0]/2-bb: Firmware version is 0x02050032 But now kdetv crashes (xawtv works). Yast still finds no stations at all, and there is no sound. xine doesn't work, either (dvb?). - -- Cheers, Carlos E. R. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (GNU/Linux) Comment: Made with pgp4pine 1.76 iD8DBQFG+jSJtTMYHG2NR9URAhodAJ9C4pki0r9uFZ3OMibDcaBZ5wfM7gCdHG5v VfWruqWpX8jVznaJ24fFlq8= =VSfr -----END PGP SIGNATURE----- --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
participants (1)
-
Carlos E. R.