[opensuse-factory] Tumbleweed Ericsson F3507g :error code: 263
Hi All, I can not use my 3g modem. (I can use under other distributions) When I turn on in networkmanager I got this: ModemManager[536]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (disabled -> enabling) ModemManager[536]: <info> (ttyACM1) opening serial port... ModemManager[536]: <info> (ttyACM2) opening serial port... dbus-daemon[474]: ModemManager[536]: <info> (ttyACM1) opening serial port... dbus-daemon[474]: ModemManager[536]: <info> (ttyACM2) opening serial port... dbus-daemon[474]: ModemManager[536]: Invalid mobile equipment error code: 263 ModemManager[536]: Invalid mobile equipment error code: 263 ModemManager[536]: <info> Falling back to previous state 'disabled' lsusb: Bus 002 Device 002: ID 0bdb:1900 Ericsson Business Mobile Networks BV F3507g Mob Anyone have any idea? Thank you, LA -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
Am Freitag, 18. Oktober 2013, 22:51:52 schrieb level.andrasnak@gmail.com:
I can not use my 3g modem.
Which laptop? A ThinkPad? Then try the section "Turning the card on" and see where/when the error is reported: http://www.thinkwiki.org/wiki/Ericsson_F3507g_Mobile_Broadband_Module
(I can use under other distributions)
Which ones? Older or newer kernels? Any other openSUSE? Under Ubuntu 13.04, too? http://ubuntuforums.org/showthread.php?t=2170407
[...[ Invalid mobile equipment error code: 263 [...]
If this is the CME error code, then it means "invalid block". Very descriptive. :-/
Anyone have any idea?
The modem is found and responds to the commands sent by the modem manager. However, it refuses to initialize. Please create a log file in debug mode so we can see the command that triggers the error: # killall NetworkManager # killall -TERM modem-manager # modem-manager --debug # NM_PPP_DEBUG=1 /usr/sbin/NetworkManager --no-daemon http://userbase.kde.org/NetworkManagement/en https://wiki.gnome.org/NetworkManager/Debugging Gruß Jan -- Indecision is the basis of flexibility. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
Jan Ritzerfeld a következőt írta ekkor: 2013. október 19. 15:37:49
Am Freitag, 18. Oktober 2013, 22:51:52 schrieb level.andrasnak@gmail.com:
I can not use my 3g modem.
Which laptop? A ThinkPad? Lenovo T400 ThinkPad
Then try the section "Turning the card on" and see where/when the error is reported: http://www.thinkwiki.org/wiki/Ericsson_F3507g_Mobile_Broadband_Module Thank"s for link. It is very usefull. On minicon /dev/ttyACM1 All test work fine: at+cfun=1 +PACSP0 It seems to good.
When I try connect by network manager I got the error on the minicon (ttyACM1) console: +CME ERROR: 263
(I can use under other distributions)
Which ones? Older or newer kernels? Any other openSUSE? Under Ubuntu 13.04, too? http://ubuntuforums.org/showthread.php?t=2170407 Ubuntu 13.04; 13.10; Debian wheezy; ...
[...[ Invalid mobile equipment error code: 263 [...]
If this is the CME error code, then it means "invalid block". Very descriptive. :-/
Anyone have any idea?
The modem is found and responds to the commands sent by the modem manager. However, it refuses to initialize. Please create a log file in debug mode so we can see the command that triggers the error: # killall NetworkManager # killall -TERM modem-manager # modem-manager --debug # NM_PPP_DEBUG=1 /usr/sbin/NetworkManager --no-daemon enable mobile boradband:
NetworkManager[1906]: <warn> Dispatcher script timed out: Script '/etc/NetworkManager/dispatcher.d/nfs' timed out. NetworkManager[1906]: <info> (ttyACM1) state changed, 'disabled' --> 'enabling' (reason: user-requested) NetworkManager[1906]: <info> (ttyACM1) state changed, 'enabling' --> 'disabled' (reason: unknown) NetworkManager[1906]: <warn> (ttyACM1) failed to enable modem: GDBus.Error:org.freedesktop.ModemManager1.Error.MobileEquipment.Unknown: Unknown error clict direct to connect: NetworkManager[1906]: <info> Activation (ttyACM1) starting connection 'T- Mobile' NetworkManager[1906]: <info> (ttyACM1): device state change: disconnected -> prepare (reason 'none') [30 40 0] NetworkManager[1906]: <info> Activation (ttyACM1) Stage 1 of 5 (Device Prepare) scheduled... NetworkManager[1906]: <info> Activation (ttyACM1) Stage 1 of 5 (Device Prepare) started... NetworkManager[1906]: <info> Activation (ttyACM1) Stage 1 of 5 (Device Prepare) complete. NetworkManager[1906]: <info> (ttyACM1) state changed, 'disabled' --> 'enabling' (reason: user-requested) NetworkManager[1906]: <info> (ttyACM1) state changed, 'enabling' --> 'disabled' (reason: unknown) NetworkManager[1906]: <warn> (ttyACM1) failed to connect modem: Unknown error NetworkManager[1906]: <info> (ttyACM1): device state change: prepare -> failed (reason 'unknown') [40 120 1] NetworkManager[1906]: <warn> Activation (ttyACM1) failed for connection 'T- Mobile' NetworkManager[1906]: <info> (ttyACM1): device state change: failed -> disconnected (reason 'none') [120 30 0] NetworkManager[1906]: <info> (ttyACM1): deactivating device (reason 'none') [0]
http://userbase.kde.org/NetworkManagement/en https://wiki.gnome.org/NetworkManager/Debugging OK
Gruß Jan
Additional info: networkmanager stoped. action :modem hardware swich to on. Modem echo in mincon connected to /ttyACM1 AT+CPIN? +CPIN: READY AT+CRSM=176,12258,0,0,10 +CRSM: 144,0,"986303439001907904F6" AT+CRSM=176,12258,0,0,10 OK AT+CIMI 216302014568066 AT+CRSM=176,28589,0,0,4 +CRSM: 144,0,"00FFFF02" AT+CRSM=176,28486,0,0,17 +CRSM: 144,0,"00542D4D6F62696C652048FFFFFFFFFFFF" AT+CNUM OK AT+WS46=? ERROR Thank's Andras -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
Am Dienstag, 22. Oktober 2013, 15:45:43 schrieb level.andrasnak@gmail.com:
Jan Ritzerfeld a következőt írta ekkor: 2013. október 19. 15:37:49
BTW, which versions are you using? Please post the output of: # rpm -q NetworkManager ModemManager mobile-broadband-provider-info
[...] All test work fine: at+cfun=1 +PACSP0 It seems to good.
Well, I think the CDC Ethernet interface is used. Is your APN set correctly in the NetworkManager mobile connection? Please test it as described in the thinkwiki: AT+CGDCONT=1,"IP","proxy" AT*ENAP=1,1 Where proxy is the appropriate APN of your provider. And to disconnect: AT*ENAP=0
When I try connect by network manager I got the error on the minicon (ttyACM1) console: +CME ERROR: 263
Nothing else? Too bad.
The modem is found and responds to the commands sent by the modem manager. However, it refuses to initialize. Please create a log file in debug mode so we can see the command that triggers the error: # killall NetworkManager # killall -TERM modem-manager # modem-manager --debug # NM_PPP_DEBUG=1 /usr/sbin/NetworkManager --no-daemon
enable mobile boradband: [...]
Please check /var/log/NetworkManager there are only the messages regarding NetworkManager. Furthermore, I do not see any output of "modem-manager --debug". But it is the most important one, containing any AT command and reply. Please make sure that you do replace your SIM PIN and other credentials or private data from its output by e.g. XXXX! Since its output is rather big, maybe you find the command that causes the CME ERROR and post only this to begin with. And some lines before and after... Gruß Jan -- Thank you for not discussing the outside world! -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
participants (2)
-
Jan Ritzerfeld -
level.andrasnak＠gmail.com