[opensuse-factory] zypper insists to use dvd-11.1-55.1.i586.pat.gz
Trying to run zypper on factory (beta3+) I get : Metadaten von Repository 'factory' abrufen [\]Datei '/suse/setup/descr/dvd-11.1-55.1.i586.pat.gz' nicht auf dem Medium 'http://ftp5.gwdg.de/pub/opensuse/factory/repo/oss/' gefunden. Abbrechen, wiederholen, ignorieren? [A/w/i]: The media provides http://ftp5.gwdg.de/pub/opensuse/factory/repo/oss/suse/setup/descr/dvd-11.1-..., which is a newer version. Is there any workaround to convince zypper to use the newer one ? -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
Hi, On Wed, 29 Oct 2008, Markus Koßmann wrote:
Trying to run zypper on factory (beta3+) I get :
Metadaten von Repository 'factory' abrufen [\]Datei '/suse/setup/descr/dvd-11.1-55.1.i586.pat.gz' nicht auf dem Medium 'http://ftp5.gwdg.de/pub/opensuse/factory/repo/oss/' gefunden.
Abbrechen, wiederholen, ignorieren? [A/w/i]: The media provides http://ftp5.gwdg.de/pub/opensuse/factory/repo/oss/suse/setup/descr/dvd-11.1-..., which is a newer version. Is there any workaround to convince zypper to use the newer one ?
Just try again. There was a new sync which has just finished 10 minutes ago (had lasted 1 hour). Viele Grüße Eberhard Mönkeberg (emoenke@gwdg.de, em@kki.org) -- Eberhard Mönkeberg Arbeitsgruppe IT-Infrastruktur E-Mail: emoenke@gwdg.de Tel.: +49 (0)551 201-1551 ------------------------------------------------------------------------- Gesellschaft für wissenschaftliche Datenverarbeitung mbH Göttingen (GWDG) Am Fassberg 11, 37077 Göttingen URL: http://www.gwdg.de E-Mail: gwdg@gwdg.de Tel.: +49 (0)551 201-1510 Fax: +49 (0)551 201-2150 Geschäftsführer: Prof. Dr. Bernhard Neumair Aufsichtsratsvorsitzender: Prof. Dr. Christian Griesinger Sitz der Gesellschaft: Göttingen Registergericht: Göttingen Handelsregister-Nr. B 598 -------------------------------------------------------------------------
Am Mittwoch, 29. Oktober 2008 schrieb Eberhard Moenkeberg:
Hi,
On Wed, 29 Oct 2008, Markus Koßmann wrote:
Trying to run zypper on factory (beta3+) I get :
Metadaten von Repository 'factory' abrufen [\]Datei '/suse/setup/descr/dvd-11.1-55.1.i586.pat.gz' nicht auf dem Medium 'http://ftp5.gwdg.de/pub/opensuse/factory/repo/oss/' gefunden.
Abbrechen, wiederholen, ignorieren? [A/w/i]: The media provides http://ftp5.gwdg.de/pub/opensuse/factory/repo/oss/suse/setup/descr/dvd-11 .1-55.4.i586.pat.gz, which is a newer version. Is there any workaround to convince zypper to use the newer one ?
Just try again. There was a new sync which has just finished 10 minutes ago (had lasted 1 hour).
Problem still exists. No update for that file on gwdg. yet. There is still the 27-Oct-2008 03:41 version . And why does it try to use the .i586 file ? This is a x86_64 system. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
Hi, On Wed, 29 Oct 2008, Markus Koßmann wrote:
Am Mittwoch, 29. Oktober 2008 schrieb Eberhard Moenkeberg:
On Wed, 29 Oct 2008, Markus Koßmann wrote:
Trying to run zypper on factory (beta3+) I get :
Metadaten von Repository 'factory' abrufen [\]Datei '/suse/setup/descr/dvd-11.1-55.1.i586.pat.gz' nicht auf dem Medium 'http://ftp5.gwdg.de/pub/opensuse/factory/repo/oss/' gefunden.
Abbrechen, wiederholen, ignorieren? [A/w/i]: The media provides http://ftp5.gwdg.de/pub/opensuse/factory/repo/oss/suse/setup/descr/dvd-11 .1-55.4.i586.pat.gz, which is a newer version. Is there any workaround to convince zypper to use the newer one ?
Just try again. There was a new sync which has just finished 10 minutes ago (had lasted 1 hour).
Problem still exists. No update for that file on gwdg. yet. There is still the 27-Oct-2008 03:41 version . And why does it try to use the .i586 file ? This is a x86_64 system.
Just wait another moment; a second rsync is necessary. I will tell whwn it is finished. Viele Grüße Eberhard Mönkeberg (emoenke@gwdg.de, em@kki.org) -- Eberhard Mönkeberg Arbeitsgruppe IT-Infrastruktur E-Mail: emoenke@gwdg.de Tel.: +49 (0)551 201-1551 ------------------------------------------------------------------------- Gesellschaft für wissenschaftliche Datenverarbeitung mbH Göttingen (GWDG) Am Fassberg 11, 37077 Göttingen URL: http://www.gwdg.de E-Mail: gwdg@gwdg.de Tel.: +49 (0)551 201-1510 Fax: +49 (0)551 201-2150 Geschäftsführer: Prof. Dr. Bernhard Neumair Aufsichtsratsvorsitzender: Prof. Dr. Christian Griesinger Sitz der Gesellschaft: Göttingen Registergericht: Göttingen Handelsregister-Nr. B 598 -------------------------------------------------------------------------
Hi, On Wed, 29 Oct 2008, Eberhard Moenkeberg wrote:
On Wed, 29 Oct 2008, Markus Koßmann wrote:
Am Mittwoch, 29. Oktober 2008 schrieb Eberhard Moenkeberg:
On Wed, 29 Oct 2008, Markus Koßmann wrote:
Trying to run zypper on factory (beta3+) I get :
Metadaten von Repository 'factory' abrufen [\]Datei '/suse/setup/descr/dvd-11.1-55.1.i586.pat.gz' nicht auf dem Medium 'http://ftp5.gwdg.de/pub/opensuse/factory/repo/oss/' gefunden.
Abbrechen, wiederholen, ignorieren? [A/w/i]: The media provides http://ftp5.gwdg.de/pub/opensuse/factory/repo/oss/suse/setup/descr/dvd-11 .1-55.4.i586.pat.gz, which is a newer version. Is there any workaround to convince zypper to use the newer one ?
Just try again. There was a new sync which has just finished 10 minutes ago (had lasted 1 hour).
Problem still exists. No update for that file on gwdg. yet. There is still the 27-Oct-2008 03:41 version . And why does it try to use the .i586 file ? This is a x86_64 system.
Just wait another moment; a second rsync is necessary. I will tell whwn it is finished.
Finished now. Viele Grüße Eberhard Mönkeberg (emoenke@gwdg.de, em@kki.org) -- Eberhard Mönkeberg Arbeitsgruppe IT-Infrastruktur E-Mail: emoenke@gwdg.de Tel.: +49 (0)551 201-1551 ------------------------------------------------------------------------- Gesellschaft für wissenschaftliche Datenverarbeitung mbH Göttingen (GWDG) Am Fassberg 11, 37077 Göttingen URL: http://www.gwdg.de E-Mail: gwdg@gwdg.de Tel.: +49 (0)551 201-1510 Fax: +49 (0)551 201-2150 Geschäftsführer: Prof. Dr. Bernhard Neumair Aufsichtsratsvorsitzender: Prof. Dr. Christian Griesinger Sitz der Gesellschaft: Göttingen Registergericht: Göttingen Handelsregister-Nr. B 598 -------------------------------------------------------------------------
Hi, On Wed, 29 Oct 2008, Eberhard Moenkeberg wrote:
On Wed, 29 Oct 2008, Eberhard Moenkeberg wrote:
On Wed, 29 Oct 2008, Markus Koßmann wrote:
Am Mittwoch, 29. Oktober 2008 schrieb Eberhard Moenkeberg:
On Wed, 29 Oct 2008, Markus Koßmann wrote:
Trying to run zypper on factory (beta3+) I get :
Metadaten von Repository 'factory' abrufen [\]Datei '/suse/setup/descr/dvd-11.1-55.1.i586.pat.gz' nicht auf dem Medium 'http://ftp5.gwdg.de/pub/opensuse/factory/repo/oss/' gefunden.
Abbrechen, wiederholen, ignorieren? [A/w/i]: The media provides http://ftp5.gwdg.de/pub/opensuse/factory/repo/oss/suse/setup/descr/dvd-11 .1-55.4.i586.pat.gz, which is a newer version. Is there any workaround to convince zypper to use the newer one ?
Just try again. There was a new sync which has just finished 10 minutes ago (had lasted 1 hour).
Problem still exists. No update for that file on gwdg. yet. There is still the 27-Oct-2008 03:41 version . And why does it try to use the .i586 file ? This is a x86_64 system.
Just wait another moment; a second rsync is necessary. I will tell whwn it is finished.
Finished now.
Wow, another rsync run necessary. It brings new metadata and changes mainly within repo/oss/suse/src/, so maybe it is working now already. Viele Grüße Eberhard Mönkeberg (emoenke@gwdg.de, em@kki.org) -- Eberhard Mönkeberg Arbeitsgruppe IT-Infrastruktur E-Mail: emoenke@gwdg.de Tel.: +49 (0)551 201-1551 ------------------------------------------------------------------------- Gesellschaft für wissenschaftliche Datenverarbeitung mbH Göttingen (GWDG) Am Fassberg 11, 37077 Göttingen URL: http://www.gwdg.de E-Mail: gwdg@gwdg.de Tel.: +49 (0)551 201-1510 Fax: +49 (0)551 201-2150 Geschäftsführer: Prof. Dr. Bernhard Neumair Aufsichtsratsvorsitzender: Prof. Dr. Christian Griesinger Sitz der Gesellschaft: Göttingen Registergericht: Göttingen Handelsregister-Nr. B 598 -------------------------------------------------------------------------
Am Mittwoch 29 Oktober 2008 schrieb Markus Koßmann:
Am Mittwoch, 29. Oktober 2008 schrieb Eberhard Moenkeberg:
Hi,
On Wed, 29 Oct 2008, Markus Koßmann wrote:
Trying to run zypper on factory (beta3+) I get :
Metadaten von Repository 'factory' abrufen [\]Datei '/suse/setup/descr/dvd-11.1-55.1.i586.pat.gz' nicht auf dem Medium 'http://ftp5.gwdg.de/pub/opensuse/factory/repo/oss/' gefunden.
Abbrechen, wiederholen, ignorieren? [A/w/i]: The media provides http://ftp5.gwdg.de/pub/opensuse/factory/repo/oss/suse/setup/descr/dvd- 11 .1-55.4.i586.pat.gz, which is a newer version. Is there any workaround to convince zypper to use the newer one ?
Just try again. There was a new sync which has just finished 10 minutes ago (had lasted 1 hour).
Problem still exists. No update for that file on gwdg. yet. There is still the 27-Oct-2008 03:41 version . And why does it try to use the .i586 file ? This is a x86_64 system.
As said earlier: use download.opensuse.org Greetings, Stephan -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
Hi, > As said earlier: use download.opensuse.org Retrieving: content.asc [done] Retrieving: content.key [done (507 B/s)] Retrieving: content [done] Retrieving repository 'factory-oss' metadata [error] Repository 'factory-oss' is invalid. History: - /var/cache/zypp/raw/factory-ossEAeQud: No repository index in content file. - Valid metadata not found at specified URL(s) I have been trying for two hours to update now and have gotten a some different error messages, but not the valid metadata so far. So download.opensuse.org does not provide a clean factory either. Felix -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
Le mercredi 29 octobre 2008, à 20:18 +0100, Felix Möller a écrit :
So download.opensuse.org does not provide a clean factory either.
Is this expected during a sync or is this only a one-time issue? (I'm trying to remember if I had this issue before, and while I think it did, I can't remember for sure) Vincent -- Les gens heureux ne sont pas pressés. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
Am Mittwoch 29 Oktober 2008 schrieb Vincent Untz:
Le mercredi 29 octobre 2008, à 20:18 +0100, Felix Möller a écrit :
So download.opensuse.org does not provide a clean factory either.
Is this expected during a sync or is this only a one-time issue?
(I'm trying to remember if I had this issue before, and while I think it did, I can't remember for sure)
This is not normal. Something erased all content of factory ;( Greetings, Stephan -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
Am Mittwoch, 29. Oktober 2008 schrieb Stephan Kulow:
Am Mittwoch 29 Oktober 2008 schrieb Markus Koßmann:
Am Mittwoch, 29. Oktober 2008 schrieb Eberhard Moenkeberg:
Hi,
On Wed, 29 Oct 2008, Markus Koßmann wrote:
Trying to run zypper on factory (beta3+) I get :
Metadaten von Repository 'factory' abrufen [\]Datei '/suse/setup/descr/dvd-11.1-55.1.i586.pat.gz' nicht auf dem Medium 'http://ftp5.gwdg.de/pub/opensuse/factory/repo/oss/' gefunden.
Abbrechen, wiederholen, ignorieren? [A/w/i]: The media provides http://ftp5.gwdg.de/pub/opensuse/factory/repo/oss/suse/setup/descr/dv d- 11 .1-55.4.i586.pat.gz, which is a newer version. Is there any workaround to convince zypper to use the newer one ?
Just try again. There was a new sync which has just finished 10 minutes ago (had lasted 1 hour).
Problem still exists. No update for that file on gwdg. yet. There is still the 27-Oct-2008 03:41 version . And why does it try to use the .i586 file ? This is a x86_64 system.
As said earlier: use download.opensuse.org
download.opensuse.org is unusable,too. It's content file is 0 bytes. Another sync seems to be started, now. I fear, I have to wait until tomorrow for the next update. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
On Wed, Oct 29, 2008 at 08:32:39PM +0100, Markus Koßmann wrote:
Am Mittwoch, 29. Oktober 2008 schrieb Stephan Kulow:
Am Mittwoch 29 Oktober 2008 schrieb Markus Koßmann:
Am Mittwoch, 29. Oktober 2008 schrieb Eberhard Moenkeberg:
Hi,
On Wed, 29 Oct 2008, Markus Koßmann wrote:
Trying to run zypper on factory (beta3+) I get :
Metadaten von Repository 'factory' abrufen [\]Datei '/suse/setup/descr/dvd-11.1-55.1.i586.pat.gz' nicht auf dem Medium 'http://ftp5.gwdg.de/pub/opensuse/factory/repo/oss/' gefunden.
Abbrechen, wiederholen, ignorieren? [A/w/i]: The media provides http://ftp5.gwdg.de/pub/opensuse/factory/repo/oss/suse/setup/descr/dv d- 11 .1-55.4.i586.pat.gz, which is a newer version. Is there any workaround to convince zypper to use the newer one ?
Just try again. There was a new sync which has just finished 10 minutes ago (had lasted 1 hour).
Problem still exists. No update for that file on gwdg. yet. There is still the 27-Oct-2008 03:41 version . And why does it try to use the .i586 file ? This is a x86_64 system.
As said earlier: use download.opensuse.org
download.opensuse.org is unusable,too. It's content file is 0 bytes. Another sync seems to be started, now. I fear, I have to wait until tomorrow for the next update.
Not only that, but it's worse: the suse subdirectory contains only "src" and "setup". Thus, something's seriously broken in the generation of the Factory tree. As far as I can see, the internal machine which generates the tree seems to have a problem - so the tree on download.o.o was emptied at 18:37, when it was updated from there. You might be able to use widehat.opensuse.org as replacement for the moment; it still has the tree, and I disabled its syncing for now so that it isn't emptied too. Peter -- Contact: admin@opensuse.org (a.k.a. ftpadmin@suse.com) #opensuse-mirrors on freenode.net Info: http://en.opensuse.org/Mirror_Infrastructure SUSE LINUX Products GmbH Research & Development
On Wed, Oct 29, 2008 at 09:10:13PM +0100, Peter Poeml wrote:
Not only that, but it's worse: the suse subdirectory contains only "src" and "setup". Thus, something's seriously broken in the generation of the Factory tree.
As far as I can see, the internal machine which generates the tree seems to have a problem - so the tree on download.o.o was emptied at 18:37, when it was updated from there.
You might be able to use widehat.opensuse.org as replacement for the moment; it still has the tree, and I disabled its syncing for now so that it isn't emptied too.
Better yet, just continue to use download.opensuse.org. I just configured it to transparently redirect you to the working server for a while, until the tree is fixed. Peter -- Contact: admin@opensuse.org (a.k.a. ftpadmin@suse.com) #opensuse-mirrors on freenode.net Info: http://en.opensuse.org/Mirror_Infrastructure SUSE LINUX Products GmbH Research & Development
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Wednesday, 2008-10-29 at 21:16 +0100, Peter Poeml wrote:
Better yet, just continue to use download.opensuse.org. I just configured it to transparently redirect you to the working server for a while, until the tree is fixed.
Doesn't work: NOT_nimrodel:/home/cer/Bugzilla # zypper clean All repositories have been cleaned up. NOT_nimrodel:/home/cer/Bugzilla # zypper ref Retrieving repository 'OSS (redirector)' metadata [error] Repository 'OSS (redirector)' is invalid. /var/cache/zypp/raw/OSS (redirector)iHajLI: No repository index in content file. Please check if the URIs defined for this repository are pointing to a valid repository. Skipping repository 'OSS (redirector)' because of the above error. Repository 'openSUSE-11.1-Updates' is up to date. Some of the repositories have not been refreshed because of an error. NOT_nimrodel:/home/cer/Bugzilla # NOT_nimrodel:/home/cer/Bugzilla # zypper lr -d # | Alias | Name | Enabled | Refresh | Priority | Type | URI | Service - --+-------------------------+-----------------------+---------+---------+----------+--------+----------------------------------------------------+-------- 1 | OSS (redirector) | OSS (redirector) | Yes | No | 99 | yast2 | http://download.opensuse.org/factory/repo/oss/ | 2 | OSS (widehat backup) | OSS (widehat backup) | No | No | 99 | yast2 | http://widehat.opensuse.org/factory/repo/oss/ | 3 | OSS_(gwdg5) | OSS (gwdg5) | No | Yes | 99 | yast2 | http://ftp5.gwdg.de/pub/opensuse/factory/repo/oss/ | 4 | openSUSE-11.1-Updates_1 | openSUSE-11.1-Updates | Yes | Yes | 99 | rpm-md | http://ftp5.gwdg.de/pub/opensuse/update/11.1/ | 5 | openSUSE-dvd 11.1-0 | openSUSE-dvd 11.1-0 | Yes | No | 99 | yast2 | cd:///?devices=/dev/hdc AFAIK, the URI is correct. - -- Cheers, Carlos E. R. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.9 (GNU/Linux) iEYEARECAAYFAkkIyaIACgkQtTMYHG2NR9WsTQCdEPYrGGuQhyVy7nQtgaY9cnYx UdEAn2S8vTXpitkuD4+94hnWm1v2gXm8 =Mupt -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
Hi, On Wed, 29 Oct 2008, Peter Poeml wrote:
On Wed, Oct 29, 2008 at 08:32:39PM +0100, Markus Koßmann wrote:
Am Mittwoch, 29. Oktober 2008 schrieb Stephan Kulow:
Am Mittwoch 29 Oktober 2008 schrieb Markus Koßmann:
Am Mittwoch, 29. Oktober 2008 schrieb Eberhard Moenkeberg:
On Wed, 29 Oct 2008, Markus Koßmann wrote:
Trying to run zypper on factory (beta3+) I get :
Metadaten von Repository 'factory' abrufen [\]Datei '/suse/setup/descr/dvd-11.1-55.1.i586.pat.gz' nicht auf dem Medium 'http://ftp5.gwdg.de/pub/opensuse/factory/repo/oss/' gefunden.
Abbrechen, wiederholen, ignorieren? [A/w/i]: The media provides http://ftp5.gwdg.de/pub/opensuse/factory/repo/oss/suse/setup/descr/dv d- 11 .1-55.4.i586.pat.gz, which is a newer version. Is there any workaround to convince zypper to use the newer one ?
Just try again. There was a new sync which has just finished 10 minutes ago (had lasted 1 hour).
Problem still exists. No update for that file on gwdg. yet. There is still the 27-Oct-2008 03:41 version . And why does it try to use the .i586 file ? This is a x86_64 system.
As said earlier: use download.opensuse.org
download.opensuse.org is unusable,too. It's content file is 0 bytes. Another sync seems to be started, now. I fear, I have to wait until tomorrow for the next update.
Not only that, but it's worse: the suse subdirectory contains only "src" and "setup". Thus, something's seriously broken in the generation of the Factory tree.
As far as I can see, the internal machine which generates the tree seems to have a problem - so the tree on download.o.o was emptied at 18:37, when it was updated from there.
You might be able to use widehat.opensuse.org as replacement for the moment; it still has the tree, and I disabled its syncing for now so that it isn't emptied too.
I can revert to a state of between 16:00 h and 18:30 h at ftp5.gwdg.de. Shall I do that, or shall I let the current rsync run to the end? Viele Grüße Eberhard Mönkeberg (emoenke@gwdg.de, em@kki.org) -- Eberhard Mönkeberg Arbeitsgruppe IT-Infrastruktur E-Mail: emoenke@gwdg.de Tel.: +49 (0)551 201-1551 ------------------------------------------------------------------------- Gesellschaft für wissenschaftliche Datenverarbeitung mbH Göttingen (GWDG) Am Fassberg 11, 37077 Göttingen URL: http://www.gwdg.de E-Mail: gwdg@gwdg.de Tel.: +49 (0)551 201-1510 Fax: +49 (0)551 201-2150 Geschäftsführer: Prof. Dr. Bernhard Neumair Aufsichtsratsvorsitzender: Prof. Dr. Christian Griesinger Sitz der Gesellschaft: Göttingen Registergericht: Göttingen Handelsregister-Nr. B 598 -------------------------------------------------------------------------
On Wed, Oct 29, 2008 at 09:17:57PM +0100, Eberhard Moenkeberg wrote:
I can revert to a state of between 16:00 h and 18:30 h at ftp5.gwdg.de. Shall I do that, or shall I let the current rsync run to the end?
You could do that, but download.o.o would not redirect to it, for now it sends all requests to widehat.o.o. Anyway, the tree is currently reassembled / restored on download.o.o, let's see when it's done. Peter -- Contact: admin@opensuse.org (a.k.a. ftpadmin@suse.com) #opensuse-mirrors on freenode.net Info: http://en.opensuse.org/Mirror_Infrastructure SUSE LINUX Products GmbH Research & Development
Hi Eberhard, On Wed, Oct 29, 2008 at 09:27:29PM +0100, Peter Poeml wrote:
On Wed, Oct 29, 2008 at 09:17:57PM +0100, Eberhard Moenkeberg wrote:
I can revert to a state of between 16:00 h and 18:30 h at ftp5.gwdg.de. Shall I do that, or shall I let the current rsync run to the end?
You could do that, but download.o.o would not redirect to it, for now it sends all requests to widehat.o.o.
Anyway, the tree is currently reassembled / restored on download.o.o, let's see when it's done.
The new tree is in transit to download.o.o and has 5 gigs in suse/i586 already, therefore I suggest that you start syncing now. I hope the tree will be a good one :-) Peter -- Contact: admin@opensuse.org (a.k.a. ftpadmin@suse.com) #opensuse-mirrors on freenode.net Info: http://en.opensuse.org/Mirror_Infrastructure SUSE LINUX Products GmbH Research & Development
Hi, On Wed, 29 Oct 2008, Peter Poeml wrote:
On Wed, Oct 29, 2008 at 09:27:29PM +0100, Peter Poeml wrote:
On Wed, Oct 29, 2008 at 09:17:57PM +0100, Eberhard Moenkeberg wrote:
I can revert to a state of between 16:00 h and 18:30 h at ftp5.gwdg.de. Shall I do that, or shall I let the current rsync run to the end?
You could do that, but download.o.o would not redirect to it, for now it sends all requests to widehat.o.o.
Anyway, the tree is currently reassembled / restored on download.o.o, let's see when it's done.
The new tree is in transit to download.o.o and has 5 gigs in suse/i586 already, therefore I suggest that you start syncing now.
I hope the tree will be a good one :-)
OK, ftp5.gwdg.de has just started a fresh rsync. Viele Grüße Eberhard Mönkeberg (emoenke@gwdg.de, em@kki.org) -- Eberhard Mönkeberg Arbeitsgruppe IT-Infrastruktur E-Mail: emoenke@gwdg.de Tel.: +49 (0)551 201-1551 ------------------------------------------------------------------------- Gesellschaft für wissenschaftliche Datenverarbeitung mbH Göttingen (GWDG) Am Fassberg 11, 37077 Göttingen URL: http://www.gwdg.de E-Mail: gwdg@gwdg.de Tel.: +49 (0)551 201-1510 Fax: +49 (0)551 201-2150 Geschäftsführer: Prof. Dr. Bernhard Neumair Aufsichtsratsvorsitzender: Prof. Dr. Christian Griesinger Sitz der Gesellschaft: Göttingen Registergericht: Göttingen Handelsregister-Nr. B 598 -------------------------------------------------------------------------
H Peter, On Wed, 29 Oct 2008, Eberhard Moenkeberg wrote:
On Wed, 29 Oct 2008, Peter Poeml wrote:
On Wed, Oct 29, 2008 at 09:27:29PM +0100, Peter Poeml wrote:
On Wed, Oct 29, 2008 at 09:17:57PM +0100, Eberhard Moenkeberg wrote:
I can revert to a state of between 16:00 h and 18:30 h at ftp5.gwdg.de. Shall I do that, or shall I let the current rsync run to the end?
You could do that, but download.o.o would not redirect to it, for now it sends all requests to widehat.o.o.
Anyway, the tree is currently reassembled / restored on download.o.o, let's see when it's done.
The new tree is in transit to download.o.o and has 5 gigs in suse/i586 already, therefore I suggest that you start syncing now.
I hope the tree will be a good one :-)
OK, ftp5.gwdg.de has just started a fresh rsync.
Is it worth to revert to a state before 18:00 h and _after_reverting to rsync again? The overall size of 40 GB should definitely be worth to give an answer... Viele Grüße Eberhard Mönkeberg (emoenke@gwdg.de, em@kki.org) -- Eberhard Mönkeberg Arbeitsgruppe IT-Infrastruktur E-Mail: emoenke@gwdg.de Tel.: +49 (0)551 201-1551 ------------------------------------------------------------------------- Gesellschaft für wissenschaftliche Datenverarbeitung mbH Göttingen (GWDG) Am Fassberg 11, 37077 Göttingen URL: http://www.gwdg.de E-Mail: gwdg@gwdg.de Tel.: +49 (0)551 201-1510 Fax: +49 (0)551 201-2150 Geschäftsführer: Prof. Dr. Bernhard Neumair Aufsichtsratsvorsitzender: Prof. Dr. Christian Griesinger Sitz der Gesellschaft: Göttingen Registergericht: Göttingen Handelsregister-Nr. B 598 -------------------------------------------------------------------------
On Wed, Oct 29, 2008 at 09:41:10PM +0100, Eberhard Moenkeberg wrote:
H Peter,
On Wed, 29 Oct 2008, Eberhard Moenkeberg wrote:
On Wed, 29 Oct 2008, Peter Poeml wrote:
On Wed, Oct 29, 2008 at 09:27:29PM +0100, Peter Poeml wrote:
On Wed, Oct 29, 2008 at 09:17:57PM +0100, Eberhard Moenkeberg wrote:
I can revert to a state of between 16:00 h and 18:30 h at ftp5.gwdg.de. Shall I do that, or shall I let the current rsync run to the end?
You could do that, but download.o.o would not redirect to it, for now it sends all requests to widehat.o.o.
Anyway, the tree is currently reassembled / restored on download.o.o, let's see when it's done.
The new tree is in transit to download.o.o and has 5 gigs in suse/i586 already, therefore I suggest that you start syncing now.
I hope the tree will be a good one :-)
OK, ftp5.gwdg.de has just started a fresh rsync.
Is it worth to revert to a state before 18:00 h and _after_reverting to rsync again?
Good question, actually I don't know. I don't know how different the new tree (which is flying in right now) is from the tree that existed this afternoon (and that you still have backed up, and which exists on widehat as well).
The overall size of 40 GB should definitely be worth to give an answer...
widehat claims that it would transfer 16GB to sync up, and download.o.o is 33GB right now so still missing ~5GB I assume. The number that widehat tells me is *shrinking*. So I would deduct that it is worth to restore the afternoon tree first, and then sync it from d.o.o. In 20 or 30 minutes, d.o.o should be complete I guess. Once the command rsync -a stage.opensuse.org::opensuse-full-with-factory/opensuse/factory \ . --stats -n -h | awk '/^Total file size/ { print $4; exit } gives a stable number, it should be finished ;) Peter -- Contact: admin@opensuse.org (a.k.a. ftpadmin@suse.com) #opensuse-mirrors on freenode.net Info: http://en.opensuse.org/Mirror_Infrastructure SUSE LINUX Products GmbH Research & Development
Hi, On Wed, 29 Oct 2008, Peter Poeml wrote:
On Wed, Oct 29, 2008 at 09:41:10PM +0100, Eberhard Moenkeberg wrote:
On Wed, 29 Oct 2008, Eberhard Moenkeberg wrote:
On Wed, 29 Oct 2008, Peter Poeml wrote:
On Wed, Oct 29, 2008 at 09:27:29PM +0100, Peter Poeml wrote:
On Wed, Oct 29, 2008 at 09:17:57PM +0100, Eberhard Moenkeberg wrote:
I can revert to a state of between 16:00 h and 18:30 h at ftp5.gwdg.de. Shall I do that, or shall I let the current rsync run to the end?
You could do that, but download.o.o would not redirect to it, for now it sends all requests to widehat.o.o.
Anyway, the tree is currently reassembled / restored on download.o.o, let's see when it's done.
The new tree is in transit to download.o.o and has 5 gigs in suse/i586 already, therefore I suggest that you start syncing now.
I hope the tree will be a good one :-)
OK, ftp5.gwdg.de has just started a fresh rsync.
Is it worth to revert to a state before 18:00 h and _after_reverting to rsync again?
Good question, actually I don't know. I don't know how different the new tree (which is flying in right now) is from the tree that existed this afternoon (and that you still have backed up, and which exists on widehat as well).
The overall size of 40 GB should definitely be worth to give an answer...
widehat claims that it would transfer 16GB to sync up, and download.o.o is 33GB right now so still missing ~5GB I assume.
The number that widehat tells me is *shrinking*. So I would deduct that it is worth to restore the afternoon tree first, and then sync it from d.o.o.
In 20 or 30 minutes, d.o.o should be complete I guess. Once the command
rsync -a stage.opensuse.org::opensuse-full-with-factory/opensuse/factory \ . --stats -n -h | awk '/^Total file size/ { print $4; exit }
gives a stable number, it should be finished ;)
I have first restored and then started rsync. Seems to be the best way - I get lots of "is uptodate". But it seems that your restored time stamps are not OK. Some files from Oct-27 get refetched now, but they are already here... Viele Grüße Eberhard Mönkeberg (emoenke@gwdg.de, em@kki.org) -- Eberhard Mönkeberg Arbeitsgruppe IT-Infrastruktur E-Mail: emoenke@gwdg.de Tel.: +49 (0)551 201-1551 ------------------------------------------------------------------------- Gesellschaft für wissenschaftliche Datenverarbeitung mbH Göttingen (GWDG) Am Fassberg 11, 37077 Göttingen URL: http://www.gwdg.de E-Mail: gwdg@gwdg.de Tel.: +49 (0)551 201-1510 Fax: +49 (0)551 201-2150 Geschäftsführer: Prof. Dr. Bernhard Neumair Aufsichtsratsvorsitzender: Prof. Dr. Christian Griesinger Sitz der Gesellschaft: Göttingen Registergericht: Göttingen Handelsregister-Nr. B 598 -------------------------------------------------------------------------
Hi, On Wed, 29 Oct 2008, Eberhard Moenkeberg wrote:
On Wed, 29 Oct 2008, Peter Poeml wrote:
On Wed, Oct 29, 2008 at 09:41:10PM +0100, Eberhard Moenkeberg wrote:
On Wed, 29 Oct 2008, Eberhard Moenkeberg wrote:
On Wed, 29 Oct 2008, Peter Poeml wrote:
On Wed, Oct 29, 2008 at 09:27:29PM +0100, Peter Poeml wrote:
On Wed, Oct 29, 2008 at 09:17:57PM +0100, Eberhard Moenkeberg wrote:
> I can revert to a state of between 16:00 h and 18:30 h at ftp5.gwdg.de. > Shall I do that, or shall I let the current rsync run to the end?
You could do that, but download.o.o would not redirect to it, for now it sends all requests to widehat.o.o.
Anyway, the tree is currently reassembled / restored on download.o.o, let's see when it's done.
The new tree is in transit to download.o.o and has 5 gigs in suse/i586 already, therefore I suggest that you start syncing now.
I hope the tree will be a good one :-)
OK, ftp5.gwdg.de has just started a fresh rsync.
Is it worth to revert to a state before 18:00 h and _after_reverting to rsync again?
Good question, actually I don't know. I don't know how different the new tree (which is flying in right now) is from the tree that existed this afternoon (and that you still have backed up, and which exists on widehat as well).
The overall size of 40 GB should definitely be worth to give an answer...
widehat claims that it would transfer 16GB to sync up, and download.o.o is 33GB right now so still missing ~5GB I assume.
The number that widehat tells me is *shrinking*. So I would deduct that it is worth to restore the afternoon tree first, and then sync it from d.o.o.
In 20 or 30 minutes, d.o.o should be complete I guess. Once the command
rsync -a stage.opensuse.org::opensuse-full-with-factory/opensuse/factory \ . --stats -n -h | awk '/^Total file size/ { print $4; exit }
gives a stable number, it should be finished ;)
I have first restored and then started rsync. Seems to be the best way - I get lots of "is uptodate". But it seems that your restored time stamps are not OK. Some files from Oct-27 get refetched now, but they are already here...
ftp5.gwdg.de has to fetch 28 GB "new" (out of 40), so good night for now from me. Viele Grüße Eberhard Mönkeberg (emoenke@gwdg.de, em@kki.org) -- Eberhard Mönkeberg Arbeitsgruppe IT-Infrastruktur E-Mail: emoenke@gwdg.de Tel.: +49 (0)551 201-1551 ------------------------------------------------------------------------- Gesellschaft für wissenschaftliche Datenverarbeitung mbH Göttingen (GWDG) Am Fassberg 11, 37077 Göttingen URL: http://www.gwdg.de E-Mail: gwdg@gwdg.de Tel.: +49 (0)551 201-1510 Fax: +49 (0)551 201-2150 Geschäftsführer: Prof. Dr. Bernhard Neumair Aufsichtsratsvorsitzender: Prof. Dr. Christian Griesinger Sitz der Gesellschaft: Göttingen Registergericht: Göttingen Handelsregister-Nr. B 598 -------------------------------------------------------------------------
Hi, On Wed, 29 Oct 2008, Eberhard Moenkeberg wrote:
On Wed, 29 Oct 2008, Eberhard Moenkeberg wrote:
On Wed, 29 Oct 2008, Peter Poeml wrote:
On Wed, Oct 29, 2008 at 09:41:10PM +0100, Eberhard Moenkeberg wrote:
On Wed, 29 Oct 2008, Eberhard Moenkeberg wrote:
On Wed, 29 Oct 2008, Peter Poeml wrote:
On Wed, Oct 29, 2008 at 09:27:29PM +0100, Peter Poeml wrote: > On Wed, Oct 29, 2008 at 09:17:57PM +0100, Eberhard Moenkeberg wrote:
> > I can revert to a state of between 16:00 h and 18:30 h at ftp5.gwdg.de. > > Shall I do that, or shall I let the current rsync run to the end? > > You could do that, but download.o.o would not redirect to it, for now it > sends all requests to widehat.o.o. > > Anyway, the tree is currently reassembled / restored on download.o.o, > let's see when it's done.
The new tree is in transit to download.o.o and has 5 gigs in suse/i586 already, therefore I suggest that you start syncing now.
I hope the tree will be a good one :-)
OK, ftp5.gwdg.de has just started a fresh rsync.
Is it worth to revert to a state before 18:00 h and _after_reverting to rsync again?
Good question, actually I don't know. I don't know how different the new tree (which is flying in right now) is from the tree that existed this afternoon (and that you still have backed up, and which exists on widehat as well).
The overall size of 40 GB should definitely be worth to give an answer...
widehat claims that it would transfer 16GB to sync up, and download.o.o is 33GB right now so still missing ~5GB I assume.
The number that widehat tells me is *shrinking*. So I would deduct that it is worth to restore the afternoon tree first, and then sync it from d.o.o.
In 20 or 30 minutes, d.o.o should be complete I guess. Once the command
rsync -a stage.opensuse.org::opensuse-full-with-factory/opensuse/factory \ . --stats -n -h | awk '/^Total file size/ { print $4; exit }
gives a stable number, it should be finished ;)
I have first restored and then started rsync. Seems to be the best way - I get lots of "is uptodate". But it seems that your restored time stamps are not OK. Some files from Oct-27 get refetched now, but they are already here...
ftp5.gwdg.de has to fetch 28 GB "new" (out of 40), so good night for now from me.
Sorry, too hard spoken - I seem to be too much engaged: ftp5.gwdg.de is complete now with the official factory - except repo/src-oss/. Viele Grüße Eberhard Mönkeberg (emoenke@gwdg.de, em@kki.org) -- Eberhard Mönkeberg Arbeitsgruppe IT-Infrastruktur E-Mail: emoenke@gwdg.de Tel.: +49 (0)551 201-1551 ------------------------------------------------------------------------- Gesellschaft für wissenschaftliche Datenverarbeitung mbH Göttingen (GWDG) Am Fassberg 11, 37077 Göttingen URL: http://www.gwdg.de E-Mail: gwdg@gwdg.de Tel.: +49 (0)551 201-1510 Fax: +49 (0)551 201-2150 Geschäftsführer: Prof. Dr. Bernhard Neumair Aufsichtsratsvorsitzender: Prof. Dr. Christian Griesinger Sitz der Gesellschaft: Göttingen Registergericht: Göttingen Handelsregister-Nr. B 598 -------------------------------------------------------------------------
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Wednesday, 2008-10-29 at 21:10 +0100, Peter Poeml wrote:
As said earlier: use download.opensuse.org
download.opensuse.org is unusable,too. It's content file is 0 bytes. Another sync seems to be started, now. I fear, I have to wait until tomorrow for the next update.
Not only that, but it's worse: the suse subdirectory contains only "src" and "setup". Thus, something's seriously broken in the generation of the Factory tree.
As far as I can see, the internal machine which generates the tree seems to have a problem - so the tree on download.o.o was emptied at 18:37, when it was updated from there.
You might be able to use widehat.opensuse.org as replacement for the moment; it still has the tree, and I disabled its syncing for now so that it isn't emptied too.
Too late! It is also broken: NOT_nimrodel:~ # time nice zypper dup -l Error building the cache: /var/cache/zypp/raw/OSS (widehat backup)ZfZlSE: No repository index in content file. Warning: Disabling repository 'OSS (widehat backup)' because of the above error. Loading repository data... Reading installed packages... Computing distribution upgrade... .... - -- Cheers, Carlos E. R. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.9 (GNU/Linux) iEYEARECAAYFAkkIxbQACgkQtTMYHG2NR9WpLwCdEXHD+2eOgfQzuKrcsJMoJMM8 AFgAnj8gO56sXdFia094VZ9NNxI3uP2e =I7Cg -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
On Wed, Oct 29, 2008 at 09:21:06PM +0100, Carlos E. R. wrote:
You might be able to use widehat.opensuse.org as replacement for the moment; it still has the tree, and I disabled its syncing for now so that it isn't emptied too.
Too late! It is also broken:
It actually worked until it started to sync from download.opensuse.org, which it did shortly before you tried. This is what I thought I had disabled -- unfortunately I wasn't aware that another sync job encompasses the "new" factory tree, so it still started to sync. Sorry about that. Peter -- Contact: admin@opensuse.org (a.k.a. ftpadmin@suse.com) #opensuse-mirrors on freenode.net Info: http://en.opensuse.org/Mirror_Infrastructure SUSE LINUX Products GmbH Research & Development
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Wednesday, 2008-10-29 at 22:11 +0100, Peter Poeml wrote: El 2008-10-29 a las 22:11 +0100, Peter Poeml escribió:
Too late! It is also broken:
It actually worked until it started to sync from download.opensuse.org, which it did shortly before you tried.
This is what I thought I had disabled -- unfortunately I wasn't aware that another sync job encompasses the "new" factory tree, so it still started to sync. Sorry about that.
Don't worry about me. I just wanted to warn you about what was happening. Maybe you need to design a tool to verify if a repo is in good order ;-) - -- Cheers, Carlos E. R. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.9 (GNU/Linux) iEYEARECAAYFAkkI5RwACgkQtTMYHG2NR9UNGwCglWFsiEZ7hTpyE4EU6vju3RPl ab0Anjv4vLv2Ld0mZL6ZCk3SZ9q5dWRh =VGxy -----END PGP SIGNATURE-----
Am Mittwoch 29 Oktober 2008 schrieb Carlos E. R.:
Maybe you need to design a tool to verify if a repo is in good order ;-)
It won't help if a script uploads the /src-oss to /oss ;( Category: shit happens Greetings, Stephan -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Wednesday, 2008-10-29 at 22:11 +0100, Peter Poeml wrote:
It actually worked until it started to sync from download.opensuse.org, which it did shortly before you tried.
This is what I thought I had disabled -- unfortunately I wasn't aware that another sync job encompasses the "new" factory tree, so it still started to sync. Sorry about that.
NOT_nimrodel:~ # time nice zypper dup -l Loading repository data... Reading installed packages... Computing distribution upgrade... The following packages are going to be upgraded: ... ... The following product is going to change vendor: openSUSE Overall download size: 562.2 M. After the operation, additional 34.2 M will be used. Continue? [YES/no]: Retrieving package OpenOffice_org-icon-themes-3.0.0.6-1.2.noarch (1/592), 17.4 M (27.4 M unpacked) Failed to mount cd:///?devices=/dev/hdc on : Mounting media failed Abort, retry, ignore? [A/r/i]: So, I disable the dvd, and get different errors instead: NOT_nimrodel:~ # zypper modifyrepo --disable "openSUSE-dvd 11.1-0" Repository 'openSUSE-dvd 11.1-0' has been sucessfully disabled. NOT_nimrodel:~ # time nice zypper dup -l Loading repository data... Reading installed packages... Computing distribution upgrade... 6 Problems: Problem: OpenOffice_org-base-extensions-3.0.0.6-1.6.i586 requires OpenOffice_org-base = 3.0.0.6, but this requirement cannot be provided Problem: OpenOffice_org-calc-extensions-3.0.0.6-1.6.i586 requires OpenOffice_org-calc = 3.0.0.6, but this requirement cannot be provided Problem: OpenOffice_org-draw-extensions-3.0.0.6-1.6.i586 requires OpenOffice_org-draw = 3.0.0.6, but this requirement cannot be provided Problem: OpenOffice_org-impress-extensions-3.0.0.6-1.6.i586 requires OpenOffice_org-impress = 3.0.0.6, but this requirement cannot be provided Problem: OpenOffice_org-writer-extensions-3.0.0.6-1.6.i586 requires OpenOffice_org-writer = 3.0.0.6, but this requirement cannot be provided Problem: yast2-online-update-2.17.9-1.3.noarch conflicts with yast2-wagon >= 2.17.3 provided by yast2-wagon-2.17.3-1.3.noarch Problem: OpenOffice_org-base-extensions-3.0.0.6-1.6.i586 requires OpenOffice_org-base = 3.0.0.6, but this requirement cannot be provided deleted providers: OpenOffice_org-base-3.0.0.6-1.3.i586[@System] Solution 1: Following actions will be done: replacement of OpenOffice_org-base-3.0.0.6-1.3.i586 with OpenOffice_org-base-3.0.0.6-1.3.i586 replacement of OpenOffice_org-3.0.0.6-1.2.i586 with OpenOffice_org-3.0.0.6-1.2.i586 replacement of OpenOffice_org-components-3.0.0.6-1.3.i586 with OpenOffice_org-components-3.0.0.6-1.3.i586 replacement of OpenOffice_org-filters-3.0.0.6-1.3.i586 with OpenOffice_org-filters-3.0.0.6-1.3.i586 replacement of OpenOffice_org-gnome-3.0.0.6-1.3.i586 with OpenOffice_org-gnome-3.0.0.6-1.3.i586 replacement of OpenOffice_org-icon-themes-3.0.0.6-1.4.noarch with OpenOffice_org-icon-themes-3.0.0.6-1.4.noarch replacement of OpenOffice_org-l10n-extras-3.0.0.6-1.3.noarch with OpenOffice_org-l10n-extras-3.0.0.6-1.3.noarch replacement of OpenOffice_org-libs-core-3.0.0.6-1.3.i586 with OpenOffice_org-libs-core-3.0.0.6-1.3.i586 replacement of OpenOffice_org-libs-extern-3.0.0.6-1.3.i586 with OpenOffice_org-libs-extern-3.0.0.6-1.3.i586 replacement of OpenOffice_org-libs-gui-3.0.0.6-1.3.i586 with OpenOffice_org-libs-gui-3.0.0.6-1.3.i586 replacement of OpenOffice_org-math-3.0.0.6-1.3.i586 with OpenOffice_org-math-3.0.0.6-1.3.i586 replacement of OpenOffice_org-ure-3.0.0.6-1.7.i586 with OpenOffice_org-ure-3.0.0.6-1.7.i586 replacement of OpenOffice_org-filters-optional-3.0.0.6-1.3.i586 with OpenOffice_org-filters-optional-3.0.0.6-1.3.i586 replacement of OpenOffice_org-help-en-US-3.0.0.6-1.5.noarch with OpenOffice_org-help-en-US-3.0.0.6-1.5.noarch replacement of OpenOffice_org-help-es-3.0.0.6-1.5.noarch with OpenOffice_org-help-es-3.0.0.6-1.5.noarch replacement of OpenOffice_org-l10n-es-3.0.0.6-1.5.noarch with OpenOffice_org-l10n-es-3.0.0.6-1.5.noarch replacement of OpenOffice_org-pyuno-3.0.0.6-1.7.i586 with OpenOffice_org-pyuno-3.0.0.6-1.7.i586 replacement of OpenOffice_org-mailmerge-3.0.0.6-1.4.i586 with OpenOffice_org-mailmerge-3.0.0.6-1.4.i586 Solution 2: deinstallation of OpenOffice_org-base-extensions-3.0.0.6-1.3.i586 Solution 3: Ignore some dependencies of OpenOffice_org-base-extensions Choose from above solutions by number or skip, retry or cancel [1/2/3/s/r/C]: What do I do? Do I let it to upgrade from the DVD somehow? - -- Cheers, Carlos E. R. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.9 (GNU/Linux) iEYEARECAAYFAkkI7EIACgkQtTMYHG2NR9WYMQCdERfftih2poBBttFa6jJPJpd2 KIQAnAgNDR8oYfWx/aBM3bntxhA2h7h/ =BjYq -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Wednesday, 2008-10-29 at 19:53 +0100, Stephan Kulow wrote:
As said earlier: use download.opensuse.org
Does not work. File '/media.1/media' not found on medium 'http://download.opensuse.org/factory/repo/oss/' Abort, retry, ignore? [A/r/i]: A Error building the cache: File '/media.1/media' not found on medium 'http://download.opensuse.org/factory/repo/oss/' Warning: Disabling repository 'OSS (redirector)' because of the above error. Loading repository data... Reading installed packages... Computing distribution upgrade... ... The following product is going to be downgraded: openSUSE The following NEW packages are going to be installed: inkscape-extensions-fig yast2-fingerprint-reader The following packages are going to be reinstalled: apparmor-docs gnome-themes xalan-j2 The following packages are going to change architecture: glibc-i18ndata glibc-locale nscd The following product is going to change architecture: openSUSE The following packages are going to change vendor: .... The following product is going to change vendor: openSUSE I filled Bug 439990 - -- Cheers, Carlos E. R. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.9 (GNU/Linux) iEYEARECAAYFAkkIwjwACgkQtTMYHG2NR9VlngCeP0KMlQJakQ9wWso2B+2IZBbF roQAn0HgMnOCK3NGdTDlDNd9AlVIjAtu =pvR5 -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
participants (7)
-
Carlos E. R. -
Eberhard Moenkeberg -
Felix Möller -
Markus Koßmann -
Peter Poeml -
Stephan Kulow -
Vincent Untz