[opensuse-factory] What is the purpose of pulse-audio???
Yesterday trying to record the contents of some cassettes, with audacity via a usb-audio device player (detected fine, without aditional drivers),, I lost almost two hours trying to solve the problem that after few seconds of started, the recording stopped all the times. The solution was to disable pulse-audio, and from there,appeared three times more mixer controls, and the recording worked fine. I'm using Opensuse 13.1 beta 1. -- USA LINUX OPENSUSE QUE ES SOFTWARE LIBRE, NO NECESITAS PIRATEAR NADA Y NI TE VAS A PREOCUPAR MAS POR LOS VIRUS Y SPYWARES: http://www.opensuse.org/es/ Puedes visitar mi blog en: http://jerbes.blogspot.com.ar/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
Answering $SUBJ: http://www.freedesktop.org/wiki/Software/PulseAudio/About/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
2013/10/4 Dominique Leuenberger a.k.a. Dimstar <dimstar@opensuse.org>:
Answering $SUBJ:
But, what is the better option? Leave pulse-audio enabled by default, or disabled? By mi experience, is better leave pulse-audio disabled by default, because many audio configurations problems are resolved by disable it. Regards, Juan -- USA LINUX OPENSUSE QUE ES SOFTWARE LIBRE, NO NECESITAS PIRATEAR NADA Y NI TE VAS A PREOCUPAR MAS POR LOS VIRUS Y SPYWARES: http://www.opensuse.org/es/ Puedes visitar mi blog en: http://jerbes.blogspot.com.ar/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
On 05/10/13 22:34, Juan Erbes wrote:
Let me say at the start that I disable, or uninstall, pulseaudio because *I* have no need for it. I only need alsa to get the sound I need from vlc to vew DVDs, listen to CDs, or view video clips online. However, if you have the need to use multiple sources of sound - eg, when recording music from a number or sources at the same time - then you need pulseaudio which is capable of handling more than one source of sound. Since pulseaudio sits ON TOP of alsa you need to get alsa working to begin with to set the sound card/chip and activate or mute channels and after this is done you get pulseaudio to work by installing *PAVUCONTROL* which is not installed by default but has to be manually installed in YaST. Having pulseaudio without pavucontrol is like having a car without a motor so install pavucontrol. To get your sound card/chip working you need to install alsamixer (use F5 & F6, etc) and you need to either disable or uninstall pulseaudio BEFORE running alsamixer because pulseaudio makes alsamixer crap out by suppressing the display of all the available channels - only 2 or 3 channels are shown if pulseaudio is enabled. But get rid of pulseaudio and all the channels available on your sound card/chip become visible and configurable. At one point you could NOT uninstall pulseaudio as doing so also bombed out alsa but now you can remove pulseaudio - or leave it alone but disable it (YaST>Sound>Other>Disable Pulseaudio (or some such words). BC -- Using openSUSE 13.1, KDE 4.11.2 & kernel 3.11.3-1 on a system with- AMD FX 8-core 3.6/4.2GHz processor 16GB PC14900/1866MHz Quad Channel Corsair "Vengeance" RAM Gigabyte AMD3+ m/board; Gigabyte nVidia GTX550Ti 1GB DDR5 GPU -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
On 05/10/13 23:06, Basil Chupin wrote:
Oh, I forgot to mention that for those who hate bloatware then you ought to know that alsa uses 27 installed files to work while pulseaudio installs 155 files before it will make a crackle. BC -- Using openSUSE 13.1, KDE 4.11.2 & kernel 3.11.3-1 on a system with- AMD FX 8-core 3.6/4.2GHz processor 16GB PC14900/1866MHz Quad Channel Corsair "Vengeance" RAM Gigabyte AMD3+ m/board; Gigabyte nVidia GTX550Ti 1GB DDR5 GPU -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 El 2013-10-05 a las 23:09 +1000, Basil Chupin escribió:
Pulse audio solves the problem that I had of two applications or more wanting to use sound at the same time, which was impossible for me. Some cards did allow this, mine did not. Previously it meant no sound for some apps till I killed the one using sound. Pulse works very well for me, has been working for a long time now. Unfortunately, it does not work for some people. - -- Cheers Carlos E. R. (from 11.4, with Evergreen, x86_64 "Celadon" (Minas Tirith)) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.16 (GNU/Linux) iF4EAREIAAYFAlJQHGQACgkQja8UbcUWM1wjjwD+Iw2BHbdrs1gJ0Xg3EAsS4Mse NTjL1LbNF1XQZ5HfvN8A/AoRyxc45YjYAyL6Td7xTa6g/F0pjVJBDTB/6pwvfMhW =/xaR -----END PGP SIGNATURE-----
On Saturday 2013-10-05 16:04, Carlos E. R. wrote:
While it is true that some soundcard do support hardware mixing and some don't, ALSA already has a softmixer - it does not need another one like PA for that. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
On 06/10/13 00:19, Jan Engelhardt wrote:
Aaah, and what is its name (in YaST), Jan, please? (If it is as you say then I am going to enjoy "sticking it" to someone re PA :-D .) BC -- Using openSUSE 13.1, KDE 4.11.2 & kernel 3.11.3-1 on a system with- AMD FX 8-core 3.6/4.2GHz processor 16GB PC14900/1866MHz Quad Channel Corsair "Vengeance" RAM Gigabyte AMD3+ m/board; Gigabyte nVidia GTX550Ti 1GB DDR5 GPU -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
In data sabato 05 ottobre 2013 20:24:45, Jiri Slaby ha scritto:
Bye. -- *** Linux user # 198661 ---_ ICQ 33500725 *** *** Home http://www.kailed.net *** *** Powered by openSUSE *** -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 El 2013-10-05 a las 20:31 +0200, Daniele escribió:
It doesn't work out of the box, by default, or I would have noticed. I had typically problems if I had a firefox tab displaying a page that used sound, even if it had stopped. If I wanted to see a movi with xine, it would have no sound. Another typycal case, was vmware: the clients would simply not get any sound. With pulse, I had a client Linux use a VoIP phone app, while the host played asterisk, without me having to configure any mixer or doing anything special. - -- Cheers Carlos E. R. (from 11.4, with Evergreen, x86_64 "Celadon" (Minas Tirith)) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.16 (GNU/Linux) iF4EAREIAAYFAlJRWPQACgkQja8UbcUWM1z0DAD+N+0dHfQfS/3eDvtKMbhjwiN2 RnPpiU8IQCUOsa1jSXMA/0Q2sQtdOHqo9ARHEdQO0tHruDMOMSK652r5+uPz3WYi =M3NE -----END PGP SIGNATURE-----
On Sunday 2013-10-06 14:35, Carlos E. R. wrote:
That may have a number of reasons: 1. you are trying to use OSS (since ALSA does not softmix that), or 2. you are using the ALSA device "hw:X,Y" instead of "default", which also bypasses dmix So you can check what device the firefox process and/or the processes of its plugins, uses by looking at /proc/X/fd for /dev/dsp* or /dev/snd/*. As for (2), it is conceivable that you might have some old .asoundrc file somewhere. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 On 2013-10-06 15:57, Jan Engelhardt wrote:
No, sorry, my problems were solved with PA since years ago, I'm not inclined to remove it and play with alsa alone. I did once, and it took me hours to restore the thing to working conditions. - -- Cheers / Saludos, Carlos E. R. (from 11.4, with Evergreen, x86_64 "Celadon" (Minas Tirith)) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.16 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iF4EAREIAAYFAlJR2KkACgkQja8UbcUWM1yZ3gD/RzVX2kpmWsRSUEmbItE8TOsy P/BjXiHU8Se08p64IJMA/00UMxSiXWa4VwaM6m0aIdm05VLpK2kRqK7oo9h9gr4M =BBVb -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
On 06/10/13 05:24, Jiri Slaby wrote:
Hmmm, interesting and thanks for this. But I found this: QUOTE Example configuration: Output with 44.1 KHz at e. g. 16 bit depth, multiple programs at once Why these formats? Because they are standard CDA, because ALSA on its own allows more than one program "to sound" only with dmix — whose resampling algorithm is inferior — and because dmix by default resamples anything lower to 48 KHz (or whatever higher format is playing at the time). Also, some get clicking sounds if at least mpd.conf is not changed this way. What is the downside? These settings cause everything (if necessary) to be resampled to this format, such as material from DVD or TV which usually is at 48 KHz. But there is no known way to have ALSA dynamically change the format, and particularly if you listen to far more CDs than anything else the occasional 48 → 44.1 is not too great a loss. UNQUOTE which does not bode well for Alsa and dmix. The URL from which the above quote is taken is: https://wiki.archlinux.org/index.php/Music_Player_Daemon/Tips_and_Tricks BC -- Using openSUSE 13.1, KDE 4.11.2 & kernel 3.11.3-1 on a system with- AMD FX 8-core 3.6/4.2GHz processor 16GB PC14900/1866MHz Quad Channel Corsair "Vengeance" RAM Gigabyte AMD3+ m/board; Gigabyte nVidia GTX550Ti 1GB DDR5 GPU -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
On 05/10/13 15:19, Jan Engelhardt wrote:
When I read that "it doesn't need ......" I smiled, like the time when I was asked on the VirtualBox forum what I needed 2 sound cards for? Sometimes I have needed 4. Regards Sid. -- Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support Senior Staff Specialist, Cricket Coach Microsoft Windows Free Zone - Linux used for all Computing Tasks -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
2013/10/5 Sid Boyce <sboyce@blueyonder.co.uk>:
In the last case, I have the equivalent to 3 sound cards, because, is the integrated on the motherboard, the output to hdmi from the video chip, and the usb-audio, from which I wanted to record, and all the times PA stopped the recording, until I disabled it. In other computer which has 3 sound cards, the integrated on the motherboard, the output to hdmi from the video chip, and a waveterminal 194 sound card, and the only way to access the setting of the sample clock rate of this card was disabling PA. Thanks, Juan -- USA LINUX OPENSUSE QUE ES SOFTWARE LIBRE, NO NECESITAS PIRATEAR NADA Y NI TE VAS A PREOCUPAR MAS POR LOS VIRUS Y SPYWARES: http://www.opensuse.org/es/ Puedes visitar mi blog en: http://jerbes.blogspot.com.ar/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
On 06/10/13 01:22, Juan Erbes wrote:
OK, the only experience I have of using HDMI sound is on the ODROID-X running Ubuntu ARMwhich works fine with pulseaudio apart from the tinny sound coming from the LCD monitor. Samplerate settings, network sound all work. I suppose different use cases, different results but since pulseaudio 1.0 I have not had any difficulties. Regards Sid. -- Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support Senior Staff Specialist, Cricket Coach Microsoft Windows Free Zone - Linux used for all Computing Tasks -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 El 2013-10-05 a las 21:22 -0300, Juan Erbes escribió:
2013/10/5 Sid Boyce <>:
Typically, the people having problems with PA were using KDE. Those using gnome had less or no problems. - -- Cheers Carlos E. R. (from 11.4, with Evergreen, x86_64 "Celadon" (Minas Tirith)) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.16 (GNU/Linux) iF4EAREIAAYFAlJRWlYACgkQja8UbcUWM1xCzQD+L7wn2H6vCwL8a61xvqifFN8G 0+zAE5iYQ2qt2W4lEiAA/i6wh8X5K7PHurnbD0fmrVQXbZT5aztGy0JGS4msM/Lg =kThW -----END PGP SIGNATURE-----
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 El 2013-10-05 a las 16:53 +0100, Sid Boyce escribió:
On 05/10/13 15:19, Jan Engelhardt wrote:
With Pulse, I get sound in both host and client when using vmware, without configuring anything... on the same card. - -- Cheers Carlos E. R. (from 11.4, with Evergreen, x86_64 "Celadon" (Minas Tirith)) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.16 (GNU/Linux) iF0EAREIAAYFAlJRWaAACgkQja8UbcUWM1yM0AD2MPsExYLN245ulqzs6+qwVl9Z 2oHwI2d9Buk0h0wElgD+MwdTL8CyVTqbqIHkRcr7tiVCV5MM5zrBTeqVk3XnKQA= =NgOT -----END PGP SIGNATURE-----
I have sometimes two or more sound devices in use for my Amateur Radio station. Configuring the routing is simple. Pulse takes care of it. It's hassle free. Sound goes where it's supposed to. I set levels in alsamixer. Steven -- ____________ Apply appropriate technology. Use what works without prejudice. Steven L Hess ARS KC6KGE DM05gd22 openSUSE Linux 12.3 KDE Known as FlameBait and The Sock Puppet of Doom. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
On 06/10/13 13:41, Steven Hess wrote:
It may be to do with how skype has to be launched PULSE_LATENCY_MSEC=30 skype& If simply "skype" is launched I get interrupted sound from it as skype has a problem with pulseaudio 4.x, hence the need for the workaround. Regards Sid. -- Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support Senior Staff Specialist, Cricket Coach Microsoft Windows Free Zone - Linux used for all Computing Tasks -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
El 05/10/13 10:09, Basil Chupin escribió:
Are you trolling ? the number of files has nothing to do with the functionality or bloat or whatever batshit crazy idea you have about software. -- "If debugging is the process of removing bugs, then programming must be the process of putting them in." - Edsger Dijkstra -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
On Sunday 2013-10-06 21:52, Cristian Rodríguez wrote:
Of course the number of files affects, to a certain degree, how fast software turns out to be. At the start of a program all the following files want to be read: shared libraries, translations and related locale stuff, themes and fonts, bookmarks. That's many crappy, scattered small reads. What I do grant is that this problem is not specific to pulseaudio, but applies on a global scale to everything. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
Hi, On Mon, 7 Oct 2013, Jan Engelhardt wrote:
On Sunday 2013-10-06 21:52, Cristian Rodríguez wrote:
El 05/10/13 10:09, Basil Chupin escribió:
Yes, Jan is fully right; system/driver files tend to open more and more companion files while starting. Using SSDs for system partitions may cure this problem, but indeed it would be only a workaround. Preloading can not be mighty enough for all. Viele Gruesse Eberhard Moenkeberg (emoenke@gwdg.de, em@kki.org) -- Eberhard Moenkeberg Arbeitsgruppe IT-Infrastruktur E-Mail: emoenke@gwdg.de Tel.: +49 (0)551 201-1551 ------------------------------------------------------------------------- Gesellschaft fuer wissenschaftliche Datenverarbeitung mbH Goettingen (GWDG) Am Fassberg 11, 37077 Goettingen URL: http://www.gwdg.de E-Mail: gwdg@gwdg.de Tel.: +49 (0)551 201-1510 Fax: +49 (0)551 201-2150 Geschaeftsfuehrer: Prof. Dr. Ramin Yahyapour Aufsichtsratsvorsitzender: Dipl.-Kfm. Markus Hoppe Sitz der Gesellschaft: Goettingen Registergericht: Goettingen Handelsregister-Nr. B 598 -------------------------------------------------------------------------
El 05/10/13 09:34, Juan Erbes escribió:
Leave pulse-audio enabled by default, or disabled?
Enabled of course, why do you think it is installed by default and a crap ton of work has been made over the years to make it work ?
By mi experience, is better leave pulse-audio disabled by default, because many audio configurations problems are resolved by disable it.
Exactly what problems ? did you filled bugs about those "problems" ? -- "If debugging is the process of removing bugs, then programming must be the process of putting them in." - Edsger Dijkstra -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
On 07/10/13 06:47, Cristian Rodríguez wrote:
This "Does not compute." Look at all the tons of crap work which has been done on -ahem.... I won't name it.... - system and the results equates to the tons of crap work done on it. "It is the quality and not the quantity that counts."
BC -- Using openSUSE 13.1, KDE 4.11.2 & kernel 3.11.3-1 on a system with- AMD FX 8-core 3.6/4.2GHz processor 16GB PC14900/1866MHz Quad Channel Corsair "Vengeance" RAM Gigabyte AMD3+ m/board; Gigabyte nVidia GTX550Ti 1GB DDR5 GPU -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
Answering $SUBJ: http://www.freedesktop.org/wiki/Software/PulseAudio/About/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
2013/10/4 Dominique Leuenberger a.k.a. Dimstar <dimstar@opensuse.org>:
Answering $SUBJ:
But, what is the better option? Leave pulse-audio enabled by default, or disabled? By mi experience, is better leave pulse-audio disabled by default, because many audio configurations problems are resolved by disable it. Regards, Juan -- USA LINUX OPENSUSE QUE ES SOFTWARE LIBRE, NO NECESITAS PIRATEAR NADA Y NI TE VAS A PREOCUPAR MAS POR LOS VIRUS Y SPYWARES: http://www.opensuse.org/es/ Puedes visitar mi blog en: http://jerbes.blogspot.com.ar/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
On 05/10/13 22:34, Juan Erbes wrote:
Let me say at the start that I disable, or uninstall, pulseaudio because *I* have no need for it. I only need alsa to get the sound I need from vlc to vew DVDs, listen to CDs, or view video clips online. However, if you have the need to use multiple sources of sound - eg, when recording music from a number or sources at the same time - then you need pulseaudio which is capable of handling more than one source of sound. Since pulseaudio sits ON TOP of alsa you need to get alsa working to begin with to set the sound card/chip and activate or mute channels and after this is done you get pulseaudio to work by installing *PAVUCONTROL* which is not installed by default but has to be manually installed in YaST. Having pulseaudio without pavucontrol is like having a car without a motor so install pavucontrol. To get your sound card/chip working you need to install alsamixer (use F5 & F6, etc) and you need to either disable or uninstall pulseaudio BEFORE running alsamixer because pulseaudio makes alsamixer crap out by suppressing the display of all the available channels - only 2 or 3 channels are shown if pulseaudio is enabled. But get rid of pulseaudio and all the channels available on your sound card/chip become visible and configurable. At one point you could NOT uninstall pulseaudio as doing so also bombed out alsa but now you can remove pulseaudio - or leave it alone but disable it (YaST>Sound>Other>Disable Pulseaudio (or some such words). BC -- Using openSUSE 13.1, KDE 4.11.2 & kernel 3.11.3-1 on a system with- AMD FX 8-core 3.6/4.2GHz processor 16GB PC14900/1866MHz Quad Channel Corsair "Vengeance" RAM Gigabyte AMD3+ m/board; Gigabyte nVidia GTX550Ti 1GB DDR5 GPU -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
On 05/10/13 23:06, Basil Chupin wrote:
Oh, I forgot to mention that for those who hate bloatware then you ought to know that alsa uses 27 installed files to work while pulseaudio installs 155 files before it will make a crackle. BC -- Using openSUSE 13.1, KDE 4.11.2 & kernel 3.11.3-1 on a system with- AMD FX 8-core 3.6/4.2GHz processor 16GB PC14900/1866MHz Quad Channel Corsair "Vengeance" RAM Gigabyte AMD3+ m/board; Gigabyte nVidia GTX550Ti 1GB DDR5 GPU -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 El 2013-10-05 a las 23:09 +1000, Basil Chupin escribió:
Pulse audio solves the problem that I had of two applications or more wanting to use sound at the same time, which was impossible for me. Some cards did allow this, mine did not. Previously it meant no sound for some apps till I killed the one using sound. Pulse works very well for me, has been working for a long time now. Unfortunately, it does not work for some people. - -- Cheers Carlos E. R. (from 11.4, with Evergreen, x86_64 "Celadon" (Minas Tirith)) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.16 (GNU/Linux) iF4EAREIAAYFAlJQHGQACgkQja8UbcUWM1wjjwD+Iw2BHbdrs1gJ0Xg3EAsS4Mse NTjL1LbNF1XQZ5HfvN8A/AoRyxc45YjYAyL6Td7xTa6g/F0pjVJBDTB/6pwvfMhW =/xaR -----END PGP SIGNATURE-----
On Saturday 2013-10-05 16:04, Carlos E. R. wrote:
While it is true that some soundcard do support hardware mixing and some don't, ALSA already has a softmixer - it does not need another one like PA for that. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
participants (11)
-
Basil Chupin
-
Carlos E. R.
-
Cristian Rodríguez
-
Daniele
-
Dominique Leuenberger a.k.a. Dimstar
-
Eberhard Moenkeberg
-
Jan Engelhardt
-
Jiri Slaby
-
Juan Erbes
-
Sid Boyce
-
Steven Hess