[opensuse-factory] Current factory snapshot fails when booting
Using 11.0 beta3. I did zypper dup today and now system boots only in safe mode. Normal boot hangs after grub: Booting the kernel BUG: Int 14: CR2 FF54F016 https://bugzilla.novell.com/show_bug.cgi?id=392576 J-O.E --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
Jan-Olof Eriksson wrote:
Using 11.0 beta3. I did zypper dup today and now system boots only in safe mode. Normal boot hangs after grub:
Booting the kernel
BUG: Int 14: CR2 FF54F016
I have exactly this using factory boot iso (attempting to do network installation of 11.0b3) - several different machines, probably the same kernel? It looks as though it is linked to https://bugzilla.novell.com/show_bug.cgi?id=375836 - I've tried the work-arounds listed there (hwprobe=-parallel,-misc.par and pnpacpi=off) to no effect. Can anyone boot the current factory boot.iso? -- Cheers Richard (MQ) --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
Richard (MQ) wrote:
Jan-Olof Eriksson wrote:
Using 11.0 beta3. I did zypper dup today and now system boots only in safe mode. Normal boot hangs after grub:
Booting the kernel
BUG: Int 14: CR2 FF54F016
I have exactly this using factory boot iso (attempting to do network installation of 11.0b3) - several different machines, probably the same kernel?
It looks as though it is linked to https://bugzilla.novell.com/show_bug.cgi?id=375836 - I've tried the work-arounds listed there (hwprobe=-parallel,-misc.par and pnpacpi=off) to no effect.
Can anyone boot the current factory boot.iso?
PS - two of these machines worked "perfectly" installing the previous betas for 11.0, absolutely no changes to either since then. A serious regression, methinks. -- Cheers Richard (MQ) --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
I have exactly this using factory boot iso (attempting to do network installation of 11.0b3) - several different machines, probably the same kernel?
the May 13th-ish boot.iso booted for me, but the installed sys hung @ GRUB> prompt on boot. the current boot.iso i can't boot, as above. but, using the FULL DVD, http://download.opensuse.org/distribution/11.0-Beta3/iso/torrent/openSUSE-11... and selcting a FTP/HTTP netinstall works, and gets me up/running. hth! --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
snowcrash+opensuse wrote:
I have exactly this using factory boot iso (attempting to do network installation of 11.0b3) - several different machines, probably the same kernel?
the May 13th-ish boot.iso booted for me, but the installed sys hung @ GRUB> prompt on boot.
the current boot.iso i can't boot, as above.
but, using the FULL DVD,
http://download.opensuse.org/distribution/11.0-Beta3/iso/torrent/openSUSE-11...
and selcting a FTP/HTTP netinstall works, and gets me up/running.
Yes, I can confirm that the full DVD boots OK on the machine with a DVD reader - but it's of limited use on the one with CD only :-( We'll just have to wait for a fix to reach the server... -- Cheers Richard (MQ) --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
On Tue, May 20, 2008 at 08:29:40PM +0100, Richard (MQ) wrote:
BUG: Int 14: CR2 FF54F016
For me it's: BUG:Int 14:CR2 1007c039 (Lenovo Thinkpad T60 2007-63G) on factory.
I have exactly this using factory boot iso (attempting to do network installation of 11.0b3) - several different machines, probably the same kernel?
It looks as though it is linked to https://bugzilla.novell.com/show_bug.cgi?id=375836 - I've tried the work-arounds listed there (hwprobe=-parallel,-misc.par and pnpacpi=off) to no effect.
For me booting failsave worked, as did adding "acpi=off" to the normal
image. Only drawback is that I don't have any usb devices, touchpad etc :-/
Ciao
Joerg
--
Joerg Mayer
On Wed, May 21, 2008 at 03:21:10PM +0200, Joerg Mayer wrote:
For me booting failsave worked, as did adding "acpi=off" to the normal image. Only drawback is that I don't have any usb devices, touchpad etc :-/
"Proper" solution: Download and install the kernel-vanilla-2.6.25.4-2 rpm.
Reboot into that one (it will be installed in parallel to the existing
kernel.
Ciao
Joerg
--
Joerg Mayer
Joerg Mayer schrieb:
On Wed, May 21, 2008 at 03:21:10PM +0200, Joerg Mayer wrote:
For me booting failsave worked, as did adding "acpi=off" to the normal image. Only drawback is that I don't have any usb devices, touchpad etc :-/
"Proper" solution: Download and install the kernel-vanilla-2.6.25.4-2 rpm. Reboot into that one (it will be installed in parallel to the existing kernel.
Could you post a link. -- i.A. Ralf Prengel Customer Care Manager Comline AG Hauert 8 D-44227 Dortmund/Germany Fon +49231 97575- 904 Fax +49231 97575- 905 EMail ralf.prengel@comline.de www.comline.de Vorstand Stephan Schilling, Erwin Leonhardi Aufsichtsrat Dr. Franz Schoser (Vorsitzender) HR Dortmund B 14570 USt.-ID-Nr. DE 124727422 --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
On Wed, May 21, 2008 at 04:12:38PM +0200, Ralf Prengel wrote:
"Proper" solution: Download and install the kernel-vanilla-2.6.25.4-2 rpm. Reboot into that one (it will be installed in parallel to the existing kernel.
Could you post a link.
http://download.opensuse.org/distribution/SL-OSS-factory/inst-source/suse/i5...
Ciao
Joerg
--
Joerg Mayer
Joerg Mayer wrote:
On Wed, May 21, 2008 at 03:21:10PM +0200, Joerg Mayer wrote:
For me booting failsave worked, as did adding "acpi=off" to the normal image. Only drawback is that I don't have any usb devices, touchpad etc :-/
"Proper" solution: Download and install the kernel-vanilla-2.6.25.4-2 rpm. Reboot into that one (it will be installed in parallel to the existing kernel.
Doesn't help much for boot.iso though - can anyone tell me if this has now been fixed? I see the file date has changed to today... -- Cheers Richard (MQ) --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
Joerg Mayer wrote:
On Tue, May 20, 2008 at 08:29:40PM +0100, Richard (MQ) wrote:
BUG: Int 14: CR2 FF54F016
For me it's: BUG:Int 14:CR2 1007c039 (Lenovo Thinkpad T60 2007-63G) on factory.
Yes, I have 1007c039 too: on AMD 2400XP home-brew system. I hadn't noticed the different addresses (or whatever the code signifies) -- Cheers Richard (MQ) --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
participants (5)
-
Jan-Olof Eriksson -
Joerg Mayer -
Ralf Prengel -
Richard (MQ) -
snowcrash+opensuse