[opensuse-factory] I can't burn the factory DVD, too big!
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, The available space on my DVD media is 4700372992, but the iso image of factory (64bits) is 4750970880. TOO BIG! :-/ cer@Telcontar:~/Download> l -h openSUSE-DVD-Build1034-x86_64.iso - -rw-r--r-- 1 cer users 4,5G 2011-02-09 13:17 openSUSE-DVD-Build1034-x86_64.iso cer@Telcontar:~/Download> l openSUSE-DVD-Build1034-x86_64.iso - -rw-r--r-- 1 cer users 4750970880 2011-02-09 13:17openSUSE-DVD-Build1034-x86_64.iso md5sum matches. Wodim refuses. k3b crashes. Brasero refuses. What to do, double layer? :-/ Brasero says: "the data size is too large for the disc even with the overburn option". wodim says: wodim: Asuming -tao mode. wodim: Future versions of wodim may have different drive dependent defaults. TOC Type: 1 = CD-ROM wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.scsidev: '/dev/dvd' devname: '/dev/dvd' scsibus: -2 target: -2 lun: -2 Linux sg driver version: 3.5.27 Wodim version: 1.1.9 SCSI buffer size: 64512 Device type : Removable CD-ROM Version : 5 Response Format: 2 Capabilities : Vendor_info : 'HL-DT-ST' Identification : 'DVDRAM GH22LS50 ' Revision : 'TL01' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Current: 0x001A (DVD+RW) Profile: 0x0012 (DVD-RAM) Profile: 0x0011 (DVD-R sequential recording) Profile: 0x0015 (DVD-R/DL sequential recording) Profile: 0x0016 (DVD-R/DL layer jump recording) Profile: 0x0014 (DVD-RW sequential recording) Profile: 0x0013 (DVD-RW restricted overwrite) Profile: 0x001A (DVD+RW) (current) Profile: 0x001B (DVD+R) Profile: 0x002B (DVD+R/DL) Profile: 0x0010 (DVD-ROM) Profile: 0x0009 (CD-R) Profile: 0x000A (CD-RW) Profile: 0x0008 (CD-ROM) Profile: 0x0002 (Removable disk) Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd). Driver flags : SWABAUDIO BURNFREE Supported modes: PACKET SAO Drive buf size : 1048576 = 1024 KB Beginning DMA speed test. Set CDR_NODMATEST environment variable if device communication breaks or freezes immediately after that. Drive DMA Speed: 16007 kB/s 90x CD 11x DVD FIFO size : 4194304 = 4096 KB Track 01: data 4530 MB Total size: 5203 MB (515:30.80) = 2319810 sectors Lout start: 5203 MB (515:32/60) = 2319810 sectors Current Secsize: 2048 HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction. wodim: ERROR: Could not manage to find medium size, and more than 4.3 GB of data for a non dual layer disc. wodim: Cannot write more than remaining DVD capacity. Telcontar:~ # dvd+rw-mediainfo /dev/dvd INQUIRY: [HL-DT-ST][DVDRAM GH22LS50 ][TL01] GET [CURRENT] CONFIGURATION: Mounted Media: 1Ah, DVD+RW Current Write Speed: 4.0x1385=5540KB/s Write Speed #0: 4.0x1385=5540KB/s Write Speed #1: 2.4x1385=3324KB/s GET [CURRENT] PERFORMANCE: Write Performance: 4.0x1385=5540KB/s@[0 -> 2295103] Speed Descriptor#0: 02/2295103 R@5.4x1385=7449KB/s W@4.0x1385=5540KB/s Speed Descriptor#1: 02/2295103 R@5.4x1385=7449KB/s W@2.4x1385=3324KB/s READ DVD STRUCTURE[#0h]: Media Book Type: 00h, DVD-ROM book [revision 0] Media ID: MBIPG101/W04 Legacy lead-out at: 2295104*2KB=4700372992 READ DISC INFORMATION: Disc status: complete Number of Sessions: 1 State of Last Session: complete Number of Tracks: 1 BG Format Status: suspended READ FORMAT CAPACITIES: formatted: 2295104*2048=4700372992 26h(0): 2295104*2048=4700372992 READ TRACK INFORMATION[#1]: Track State: complete Track Start Address: 0*2KB Free Blocks: 0*2KB Track Size: 2295104*2KB FABRICATED TOC: Track#1 : 14@0 Track#AA : 14@2295104 Multi-session Info: #1@0 READ CAPACITY: 2295104*2048=4700372992 Media is RW. Wodim refuses to blank it, k3b, when forced, formats it. It isempty. Size is 4700372992 ISO is 4750970880 - --> TOO BIG! Bugzilla? :-( - -- Cheers / Saludos, Carlos E. R. (from 11.2 x86_64 "Emerald" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.12 (GNU/Linux) iEYEARECAAYFAk1Smt8ACgkQtTMYHG2NR9U8lACgikEpdXKEbTTQISnNNXsFjQOw f+wAnApcBrr15WEGOLBNdWtBzmSGWnDD =wgNW -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
On Wed, 9 Feb 2011 14:47:05 +0100 (CET), "Carlos E. R." <carlos.e.r@opensuse.org> wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Hi,
The available space on my DVD media is 4700372992, but the iso image of factory (64bits) is 4750970880.
TOO BIG! :-/
cer@Telcontar:~/Download> l -h openSUSE-DVD-Build1034-x86_64.iso - -rw-r--r-- 1 cer users 4,5G 2011-02-09 13:17 openSUSE-DVD-Build1034-x86_64.iso cer@Telcontar:~/Download> l openSUSE-DVD-Build1034-x86_64.iso - -rw-r--r-- 1 cer users 4750970880 2011-02-09 13:17openSUSE-DVD-Build1034-x86_64.iso
md5sum matches.
Wodim refuses. k3b crashes. Brasero refuses. What to do, double layer? :-/
Brasero says: "the data size is too large for the disc even with the overburn option".
wodim says:
wodim: Asuming -tao mode. wodim: Future versions of wodim may have different drive dependent defaults. TOC Type: 1 = CD-ROM wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.scsidev: '/dev/dvd' devname: '/dev/dvd' scsibus: -2 target: -2 lun: -2 Linux sg driver version: 3.5.27 Wodim version: 1.1.9 SCSI buffer size: 64512 Device type : Removable CD-ROM Version : 5 Response Format: 2 Capabilities : Vendor_info : 'HL-DT-ST' Identification : 'DVDRAM GH22LS50 ' Revision : 'TL01' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Current: 0x001A (DVD+RW) Profile: 0x0012 (DVD-RAM) Profile: 0x0011 (DVD-R sequential recording) Profile: 0x0015 (DVD-R/DL sequential recording) Profile: 0x0016 (DVD-R/DL layer jump recording) Profile: 0x0014 (DVD-RW sequential recording) Profile: 0x0013 (DVD-RW restricted overwrite) Profile: 0x001A (DVD+RW) (current) Profile: 0x001B (DVD+R) Profile: 0x002B (DVD+R/DL) Profile: 0x0010 (DVD-ROM) Profile: 0x0009 (CD-R) Profile: 0x000A (CD-RW) Profile: 0x0008 (CD-ROM) Profile: 0x0002 (Removable disk) Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd). Driver flags : SWABAUDIO BURNFREE Supported modes: PACKET SAO Drive buf size : 1048576 = 1024 KB Beginning DMA speed test. Set CDR_NODMATEST environment variable if device communication breaks or freezes immediately after that. Drive DMA Speed: 16007 kB/s 90x CD 11x DVD FIFO size : 4194304 = 4096 KB Track 01: data 4530 MB Total size: 5203 MB (515:30.80) = 2319810 sectors Lout start: 5203 MB (515:32/60) = 2319810 sectors Current Secsize: 2048 HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction. wodim: ERROR: Could not manage to find medium size, and more than 4.3 GB of data for a non dual layer disc. wodim: Cannot write more than remaining DVD capacity.
Telcontar:~ # dvd+rw-mediainfo /dev/dvd INQUIRY: [HL-DT-ST][DVDRAM GH22LS50 ][TL01] GET [CURRENT] CONFIGURATION: Mounted Media: 1Ah, DVD+RW Current Write Speed: 4.0x1385=5540KB/s Write Speed #0: 4.0x1385=5540KB/s Write Speed #1: 2.4x1385=3324KB/s GET [CURRENT] PERFORMANCE: Write Performance: 4.0x1385=5540KB/s@[0 -> 2295103] Speed Descriptor#0: 02/2295103 R@5.4x1385=7449KB/s W@4.0x1385=5540KB/s Speed Descriptor#1: 02/2295103 R@5.4x1385=7449KB/s W@2.4x1385=3324KB/s READ DVD STRUCTURE[#0h]: Media Book Type: 00h, DVD-ROM book [revision 0] Media ID: MBIPG101/W04 Legacy lead-out at: 2295104*2KB=4700372992 READ DISC INFORMATION: Disc status: complete Number of Sessions: 1 State of Last Session: complete Number of Tracks: 1 BG Format Status: suspended READ FORMAT CAPACITIES: formatted: 2295104*2048=4700372992 26h(0): 2295104*2048=4700372992 READ TRACK INFORMATION[#1]: Track State: complete Track Start Address: 0*2KB Free Blocks: 0*2KB Track Size: 2295104*2KB FABRICATED TOC: Track#1 : 14@0 Track#AA : 14@2295104 Multi-session Info: #1@0 READ CAPACITY: 2295104*2048=4700372992
Media is RW. Wodim refuses to blank it, k3b, when forced, formats it. It
isempty.
Size is 4700372992 ISO is 4750970880
- --> TOO BIG!
Bugzilla? :-(
- -- Cheers / Saludos, Carlos E. R. (from 11.2 x86_64 "Emerald" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.12 (GNU/Linux)
iEYEARECAAYFAk1Smt8ACgkQtTMYHG2NR9U8lACgikEpdXKEbTTQISnNNXsFjQOw f+wAnApcBrr15WEGOLBNdWtBzmSGWnDD =wgNW -----END PGP SIGNATURE----- Hello I suppose an alternate method is to use the openSUSE-NET-xxxx-Buildxxxx-Media.iso Cheers Glenn -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 2011-02-09 14:52, doiggl@velocitynet.com.au wrote:
On Wed, 9 Feb 2011 14:47:05 +0100 (CET), "Carlos E. R." <> wrote:
Hello I suppose an alternate method is to use the openSUSE-NET-xxxx-Buildxxxx-Media.iso
Not for me, my internet is too slow. - -- Cheers / Saludos, Carlos E. R. (from 11.2 x86_64 "Emerald" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.12 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org/ iEYEARECAAYFAk1Sny8ACgkQtTMYHG2NR9VvwwCgiP/OKqAIng2IpXIkM1ytbroH 1+IAnRKWDEe/URqkXp+R/uaAjCD2i6nn =rwhq -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
"Carlos E. R." <carlos.e.r@opensuse.org> wrote:
The available space on my DVD media is 4700372992, but the iso image of factory (64bits) is 4750970880.
TOO BIG! :-/
cer@Telcontar:~/Download> l -h openSUSE-DVD-Build1034-x86_64.iso - -rw-r--r-- 1 cer users 4,5G 2011-02-09 13:17 openSUSE-DVD-Build1034-x86_64.iso cer@Telcontar:~/Download> l openSUSE-DVD-Build1034-x86_64.iso - -rw-r--r-- 1 cer users 4750970880 2011-02-09 13:17openSUSE-DVD-Build1034-x86_64.iso
md5sum matches.
Wodim refuses. k3b crashes. Brasero refuses. What to do, double layer? :-/
Brasero says: "the data size is too large for the disc even with the overburn option".
wodim says:
Your problem is that you use inoficial software that does not support DVD media. DVD media usually has less that 2300000 sectors but wodim is too dumb to read the capacity and too dumb to write in dual layer. I recomend you to use the official cdrecord. Jörg -- EMail:joerg@schily.isdn.cs.tu-berlin.de (home) Jörg Schilling D-13353 Berlin js@cs.tu-berlin.de (uni) joerg.schilling@fokus.fraunhofer.de (work) Blog: http://schily.blogspot.com/ URL: http://cdrecord.berlios.de/private/ ftp://ftp.berlios.de/pub/schily -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 2011-02-09 14:56, Joerg Schilling wrote:
"Carlos E. R." <> wrote:
I recomend you to use the official cdrecord.
NO. cdrecord refuses to use my burner. There is a bugzilla about that one. Please, you go argue your point about legalities with Novell, not with me. Your answer is not the correct one, see Stephan's reply. - -- Cheers / Saludos, Carlos E. R. (from 11.2 x86_64 "Emerald" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.12 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org/ iEYEARECAAYFAk1SoGkACgkQtTMYHG2NR9WocgCfeGaVmkrVc3oIrj6zhgKJ9OBx evcAnR5zto37bOZ1ta7ZwGmn5jmT9A4W =fkUe -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
"Carlos E. R." <robin.listas@telefonica.net> wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
On 2011-02-09 14:56, Joerg Schilling wrote:
"Carlos E. R." <> wrote:
I recomend you to use the official cdrecord.
NO.
cdrecord refuses to use my burner. There is a bugzilla about that one.
Cdrecord is known to work with all drives. In special I own HL-DT-ST drives that are known to work without problems. If you have problems with your drive, I recommend you to make a bugreport. P.S.: Why did you send two separate mails? Jörg -- EMail:joerg@schily.isdn.cs.tu-berlin.de (home) Jörg Schilling D-13353 Berlin js@cs.tu-berlin.de (uni) joerg.schilling@fokus.fraunhofer.de (work) Blog: http://schily.blogspot.com/ URL: http://cdrecord.berlios.de/private/ ftp://ftp.berlios.de/pub/schily -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 2011-02-09 15:14, Joerg Schilling wrote:
"Carlos E. R." <> wrote:
P.S.: Why did you send two separate mails?
Your fault. You are sending two copies, I responded to the private one without seeing the copy to the list. Thus I had to repeat and send to the list again. - -- Cheers / Saludos, Carlos E. R. (from 11.2 x86_64 "Emerald" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.12 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org/ iEYEARECAAYFAk1SofcACgkQtTMYHG2NR9XYBQCdHUaEIftX9bZTJJiVTK4cSAW0 cd4An0ZFmKSe5PrPDoQH1nhNg6lb5wEd =U7c7 -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
On 02/09/2011 03:56 PM, Joerg Schilling wrote:
Your problem is that you use inoficial software that does not support DVD media. Should be : Your problem is that you use unofficial software that does not support DVD media.
Dave P -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
Am Mittwoch, 9. Februar 2011 schrieb Carlos E. R.:
Bugzilla? :-(
Reading? http://en.opensuse.org/openSUSE:Most_annoying_bugs_11.4_dev Greetings, Stephan -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 2011-02-09 14:56, Stephan Kulow wrote:
Am Mittwoch, 9. Februar 2011 schrieb Carlos E. R.:
Bugzilla? :-(
Reading? http://en.opensuse.org/openSUSE:Most_annoying_bugs_11.4_dev
ARGH!!! :-( So what, wait till next milestone or RC1? Net install is not an option. - -- Cheers / Saludos, Carlos E. R. (from 11.2 x86_64 "Emerald" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.12 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org/ iEYEARECAAYFAk1SoPoACgkQtTMYHG2NR9V9pgCfRCzlD1nY0aubsQacwaCNVYfX Qv8AniLEAJ10XQHYEck0P1jcX02nm05z =DSf/ -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
On Wed, Feb 9, 2011 at 15:13, Carlos E. R. wrote:
Reading? http://en.opensuse.org/openSUSE:Most_annoying_bugs_11.4_dev
ARGH!!! :-(
So what, wait till next milestone or RC1? Net install is not an option.
If you have a USB stick.... you could put the ISO on that and boot/install from USB. C. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 2011-02-09 15:20, C wrote:
On Wed, Feb 9, 2011 at 15:13, Carlos E. R. wrote:
Reading? http://en.opensuse.org/openSUSE:Most_annoying_bugs_11.4_dev
ARGH!!! :-(
So what, wait till next milestone or RC1? Net install is not an option.
If you have a USB stick.... you could put the ISO on that and boot/install from USB.
The link above syas it is not only too big, but broken as well. The only alternatives are installing M5, if the ISO is still available, then dup, or wait for RC1. - -- Cheers / Saludos, Carlos E. R. (from 11.2 x86_64 "Emerald" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.12 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org/ iEYEARECAAYFAk1So9QACgkQtTMYHG2NR9VIoQCeL13aqGVpC7mPTN2igZdJBY+9 eUoAn0cSlbUOSHGGtxsj2vQ9rf4l2Y7c =laX3 -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
2011/2/9 Carlos E. R. <robin.listas@telefonica.net>:
So what, wait till next milestone or RC1? Net install is not an option.
You can directly install from the ISO file in the hard drive (or netowrk, or...): http://en.opensuse.org/SDB:Linuxrc#p_install You just need to extract vmlinuz/initrd from the ISO and point grub to them. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 2011-02-09 15:25, Cristian Morales Vega wrote:
2011/2/9 Carlos E. R. <>:
So what, wait till next milestone or RC1? Net install is not an option.
You can directly install from the ISO file in the hard drive (or netowrk, or...): http://en.opensuse.org/SDB:Linuxrc#p_install You just need to extract vmlinuz/initrd from the ISO and point grub to them.
No, the link says the image is also broken. - -- Cheers / Saludos, Carlos E. R. (from 11.2 x86_64 "Emerald" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.12 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org/ iEYEARECAAYFAk1SpkoACgkQtTMYHG2NR9UIwQCeNf4maArYgyN50fCq6nIlnaCh FdMAnibjOgb352yh4xbYbHLdlA7cc90p =r1WU -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
participants (8)
-
C -
Carlos E. R. -
Carlos E. R. -
Cristian Morales Vega -
Dave Plater -
doiggl＠velocitynet.com.au -
Joerg.Schilling＠fokus.fraunhofer.de -
Stephan Kulow