[opensuse-factory] dracut problem
System drops into a dracut shell, no devices found. "ls -l /dev/disk" is not there. With the previous 3.12.0-rc4 vanilla kernel installed one week ago, lsinitrd shows a large number of modules. sabre:~ # dracut --force --kver 3.12.0-rc5-smp+ Executing: /usr/bin/dracut --force --kver 3.12.0-rc5-smp+ dracut module 'cifs' depends on 'network', which can't be installed dracut module 'network' cannot be found or installed. dracut module 'network' cannot be found or installed. dracut module 'network' cannot be found or installed. dracut module 'network' cannot be found or installed. *** Including module: bash *** *** Including module: i18n *** *** Including module: drm *** *** Including module: plymouth *** *** Including module: btrfs *** *** Including module: crypt *** *** Including module: dm *** Skipping udev rule: 64-device-mapper.rules Skipping udev rule: 60-persistent-storage-dm.rules Skipping udev rule: 55-dm.rules *** Including module: dmraid *** Skipping udev rule: 64-md-raid.rules *** Including module: kernel-modules *** *** Including module: lvm *** Skipping udev rule: 64-device-mapper.rules Skipping udev rule: 56-lvm.rules Skipping udev rule: 60-persistent-storage-lvm.rules *** Including module: mdraid *** Skipping udev rule: 64-md-raid.rules *** Including module: multipath *** Skipping udev rule: 40-multipath.rules Skipping udev rule: 62-multipath.rules Skipping udev rule: 65-multipath.rules Skipping udev rule: 66-kpartx.rules *** Including module: resume *** *** Including module: rootfs-block *** *** Including module: terminfo *** *** Including module: udev-rules *** Skipping udev rule: 91-permissions.rules *** Including module: systemd *** *** Including module: base *** *** Including module: fs-lib *** *** Including module: shutdown *** *** Including module: suse *** *** Including modules done *** *** Installing kernel module dependencies and firmware *** *** Installing kernel module dependencies and firmware done *** *** Resolving executable dependencies *** *** Resolving executable dependencies done*** *** Hardlinking files *** *** Hardlinking files done *** *** Stripping files *** *** Stripping files done *** *** Generating early-microcode cpio image *** *** Constructing AuthenticAMD.bin **** *** Constructing GenuineIntel.bin **** *** Creating image file *** *** Creating image file done *** sabre:~ # lsinitrd /boot/initrd-3.12.0-rc5-smp+ Image: /boot/initrd-3.12.0-rc5-smp+: 19M ======================================================================== with dracut modules: ======================================================================== drwxr-xr-x 3 root root 0 Oct 15 04:09 . drwxr-xr-x 3 root root 0 Oct 15 04:09 kernel drwxr-xr-x 3 root root 0 Oct 15 04:09 kernel/x86 drwxr-xr-x 2 root root 0 Oct 15 04:09 kernel/x86/microcode -rw-r--r-- 1 root root 18644 Oct 15 04:09 kernel/x86/microcode/AuthenticAMD.bin -rw-r--r-- 1 root root 494592 Oct 15 04:09 kernel/x86/microcode/GenuineIntel.bin ======================================================================== sabre:~ # rpm -qi dracut Name : dracut Version : 034 Release : 1.1 Architecture: x86_64 Install Date: Tue 15 Oct 2013 04:14:09 BST sabre:/boot # cat /etc/SuSE-release openSUSE 13.1 (x86_64) VERSION = 13.1 CODENAME = Bottle # /etc/SuSE-release is deprecated and will be removed in the future, use /etc/os-release instead Regards Sid. -- Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support Senior Staff Specialist, Cricket Coach Microsoft Windows Free Zone - Linux used for all Computing Tasks -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
El 15/10/13 01:11, Sid Boyce escribió:
System drops into a dracut shell, no devices found. "ls -l /dev/disk" is not there.
what is your root= cmdline ?
sabre:~ # lsinitrd /boot/initrd-3.12.0-rc5-smp+ Image: /boot/initrd-3.12.0-rc5-smp+: 19M ======================================================================== with dracut modules: ======================================================================== drwxr-xr-x 3 root root 0 Oct 15 04:09 . drwxr-xr-x 3 root root 0 Oct 15 04:09 kernel drwxr-xr-x 3 root root 0 Oct 15 04:09 kernel/x86 drwxr-xr-x 2 root root 0 Oct 15 04:09 kernel/x86/microcode -rw-r--r-- 1 root root 18644 Oct 15 04:09 kernel/x86/microcode/AuthenticAMD.bin -rw-r--r-- 1 root root 494592 Oct 15 04:09 kernel/x86/microcode/GenuineIntel.bin ========================================================================
rebuild it in host only mode. your initrd has both intel and amd microcode (not related to the boot fail however) -- "If debugging is the process of removing bugs, then programming must be the process of putting them in." - Edsger Dijkstra -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
sabre:~ # cat /proc/cmdline BOOT_IMAGE=/vmlinuz-3.12.0-rc5-smp+ root=UUID=76fd06fb-9c50-4bee-9947-f591ba776843 resume=/dev/disk/by-id/ata-SAMSUNG_HD103UJ_S13PJDWS258743-part3 splash quiet showopts vga=0x317 Regards Sid. On 15/10/13 15:22, Cristian Rodríguez wrote:
El 15/10/13 01:11, Sid Boyce escribió:
System drops into a dracut shell, no devices found. "ls -l /dev/disk" is not there.
what is your root= cmdline ?
sabre:~ # lsinitrd /boot/initrd-3.12.0-rc5-smp+ Image: /boot/initrd-3.12.0-rc5-smp+: 19M ======================================================================== with dracut modules: ======================================================================== drwxr-xr-x 3 root root 0 Oct 15 04:09 . drwxr-xr-x 3 root root 0 Oct 15 04:09 kernel drwxr-xr-x 3 root root 0 Oct 15 04:09 kernel/x86 drwxr-xr-x 2 root root 0 Oct 15 04:09 kernel/x86/microcode -rw-r--r-- 1 root root 18644 Oct 15 04:09 kernel/x86/microcode/AuthenticAMD.bin -rw-r--r-- 1 root root 494592 Oct 15 04:09 kernel/x86/microcode/GenuineIntel.bin ======================================================================== rebuild it in host only mode. your initrd has both intel and amd microcode (not related to the boot fail however)
-- Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support Senior Staff Specialist, Cricket Coach Microsoft Windows Free Zone - Linux used for all Computing Tasks -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
In .config CONFIG_CMDLINE_BOOL and CONFIG_CMDLINE_OVERRIDE are not set. sabre:~ # cat /proc/cmdline BOOT_IMAGE=/vmlinuz-3.12.0-rc5-smp+ root=UUID=76fd06fb-9c50-4bee-9947-f591ba776843 resume=/dev/disk/by-id/ata-SAMSUNG_HD103UJ_S13PJDWS258743-part3 splash quiet showopts vga=0x317 Regards Sid. On 15/10/13 15:22, Cristian Rodríguez wrote:
El 15/10/13 01:11, Sid Boyce escribió:
System drops into a dracut shell, no devices found. "ls -l /dev/disk" is not there.
what is your root= cmdline ?
sabre:~ # lsinitrd /boot/initrd-3.12.0-rc5-smp+ Image: /boot/initrd-3.12.0-rc5-smp+: 19M ======================================================================== with dracut modules: ======================================================================== drwxr-xr-x 3 root root 0 Oct 15 04:09 . drwxr-xr-x 3 root root 0 Oct 15 04:09 kernel drwxr-xr-x 3 root root 0 Oct 15 04:09 kernel/x86 drwxr-xr-x 2 root root 0 Oct 15 04:09 kernel/x86/microcode -rw-r--r-- 1 root root 18644 Oct 15 04:09 kernel/x86/microcode/AuthenticAMD.bin -rw-r--r-- 1 root root 494592 Oct 15 04:09 kernel/x86/microcode/GenuineIntel.bin ======================================================================== rebuild it in host only mode. your initrd has both intel and amd microcode (not related to the boot fail however)
-- Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support Senior Staff Specialist, Cricket Coach Microsoft Windows Free Zone - Linux used for all Computing Tasks -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
El 15/10/13 13:00, Sid Boyce escribió:
In .config CONFIG_CMDLINE_BOOL and CONFIG_CMDLINE_OVERRIDE are not set.
sabre:~ # cat /proc/cmdline BOOT_IMAGE=/vmlinuz-3.12.0-rc5-smp+ root=UUID=76fd06fb-9c50-4bee-9947-f591ba776843 resume=/dev/disk/by-id/ata-SAMSUNG_HD103UJ_S13PJDWS258743-part3 splash quiet showopts vga=0x317 Regards Sid.
ok, when you are dropped to the emergency console, you can run journalctl and see what the logs say..is there any relevant entry there ? -- "If debugging is the process of removing bugs, then programming must be the process of putting them in." - Edsger Dijkstra -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
On 15/10/13 20:08, Cristian Rodríguez wrote:
El 15/10/13 13:00, Sid Boyce escribió:
In .config CONFIG_CMDLINE_BOOL and CONFIG_CMDLINE_OVERRIDE are not set.
sabre:~ # cat /proc/cmdline BOOT_IMAGE=/vmlinuz-3.12.0-rc5-smp+ root=UUID=76fd06fb-9c50-4bee-9947-f591ba776843 resume=/dev/disk/by-id/ata-SAMSUNG_HD103UJ_S13PJDWS258743-part3 splash quiet showopts vga=0x317 Regards Sid. ok, when you are dropped to the emergency console, you can run journalctl and see what the logs say..is there any relevant entry there ?
I shall have to bring it up again later to get fuller details from journalctl and /run/initramfs/rdsosreport.txt. journalctl reported it couldn't find /lib/modules/3.12.0-rc5-smp+/modules.dep and it couldn't find /dev/disk/by-uuid/76fd06fb-9c50-4bee-9947-f591ba776843 + blkid + blkid -o udev + ls -l /dev/disk/by* No such file or directory Regards Sid. -- Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support Senior Staff Specialist, Cricket Coach Microsoft Windows Free Zone - Linux used for all Computing Tasks -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
participants (2)
-
Cristian Rodríguez -
Sid Boyce