Hello, after updating from snapshot 20231126 to 20231127 audio is broken on my system. Snapshot 20231127 contains pipewire 1.0. I installed 20231127 yesterday before shutting down the system. When starting it today I noticed that the Spotofy app refuses to play any track. Then I found that the speaker in system tray was disabled. When checking my audio configuration it didn't find any audio device anymore. So I went back to 20231126, locked the following packages and rebooted. #zypper ll # | Name | Type | Repository | Comment --+----------------------+---------+------------+-------- 1 | kpipewire-imports | package | (any) | 2 | libpipewire | package | (any) | 3 | libwireplumber | package | (any) | 4 | libwireplumber-0_4-0 | package | (any) | 5 | pipewire* | package | (any) | 6 | wireplumber | package | (any) | Then I updated to 20231127 again, rebooted, and.. audio still works. hwinfo finds these audio devices: 19: PCI d00.3: 0403 Audio device [Created at pci.386] Unique ID: FRmF.ziY0svRSom2 Parent ID: JZZT.XtQqpuv2hW0 SysFS ID: /devices/pci0000:00/0000:00:08.1/0000:0d:00.3 SysFS BusID: 0000:0d:00.3 Hardware Class: sound Model: "AMD Family 17h (Models 00h-0fh) HD Audio Controller" Vendor: pci 0x1022 "AMD" Device: pci 0x1457 "Family 17h (Models 00h-0fh) HD Audio Controller" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8723 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xfce00000-0xfce07fff (rw,non-prefetchable) IRQ: 116 (2027 events) Module Alias: "pci:v00001022d00001457sv00001043sd00008723bc04sc03i00" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #31 (PCI bridge) 38: PCI b00.1: 0403 Audio device [Created at pci.386] Unique ID: 94OI.b0tOCU4_vDC Parent ID: cuhJ.CS5kfnTSviA SysFS ID: /devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1 SysFS BusID: 0000:0b:00.1 Hardware Class: sound Model: "ATI Navi 21 HDMI Audio [Radeon RX 6800/6800 XT / 6900 XT]" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0xab28 "Navi 21 HDMI Audio [Radeon RX 6800/6800 XT / 6900 XT]" SubVendor: pci 0x1002 "ATI Technologies Inc" SubDevice: pci 0xab28 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xfc920000-0xfc923fff (rw,non-prefetchable) IRQ: 115 (276 events) Module Alias: "pci:v00001002d0000AB28sv00001002sd0000AB28bc04sc03i00" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #24 (PCI bridge) I'm using the audio device an the Asus mainboard (Intel HD Audio). Is there anything special to configure after updating from pipewire 0.3.85 to 1.0.0? Unfortunately I didn't run hwinfo with pipewire 1.0.0 installed. Regards, Oliver -- PGP Public Key available at https://pgp.mit.edu/ Key fingerprint = 3264 280C 05B1 572F 3F0B 42B8 1E7B 2D9D 063B D507