I will throw the factory factory-url into Yast, upgrade the kernel, and see what happens..;-)
(results will be posted..)
Please be careful, especially if you are using NetworkManager. I'm using the latest stable vannilla 2.6.21.1 , openSUSE 10.2 x86_64, it seems that YaST cannot handle my netcards anymore. A diff between hwinfo --netcard under 2.6.18.8 & 2.6.21.1 shows that the new kernel would hide some info so that yast in 10.2 cannot handle it. The new kernel will change irq, hides device name and etc... For my case (): --- netcard-2-6-18.txt 2007-05-02 15:21:57.000000000 +0800 +++ netcard-2-6-21.txt 2007-05-02 15:17:22.000000000 +0800 @@ -1,7 +1,7 @@ 27: PCI 500.0: 0200 Ethernet controller [Created at pci.286] UDI: /org/freedesktop/Hal/devices/pci_14e4_169d - Unique ID: rBUF.5yKJ55IGoj0 + Unique ID: Ddhb.5yKJ55IGoj0 Parent ID: H0_h.0XeE0ctGI+6 SysFS ID: /devices/pci0000:00/0000:00:06.0/0000:05:00.0 SysFS BusID: 0000:05:00.0 @@ -14,11 +14,8 @@ Revision: 0x11 Driver: "tg3" Driver Modules: "tg3" - Device File: eth0 Memory Range: 0xc0200000-0xc020ffff (rw,non-prefetchable) - IRQ: 233 (9878 events) - HW Address: 00:c0:9f:a1:ce:68 - Link detected: yes + IRQ: 18 (10288 events) Module Alias: "pci:v000014E4d0000169Dsv00001025sd0000007Ebc02sc00i00" Driver Info #0: Driver Status: tg3 is active @@ -26,10 +23,10 @@ Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #12 (PCI bridge) -28: PCI 602.0: 0200 Ethernet controller +28: PCI 602.0: 0280 Network controller [Created at pci.286] UDI: /org/freedesktop/Hal/devices/pci_14e4_4318 - Unique ID: JNkJ.x+xgx72Q9R2 + Unique ID: 2i_g.x1NZMPDNvf7 Parent ID: qscc.hTSZxA6Z5F6 SysFS ID: /devices/pci0000:00/0000:00:14.4/0000:06:02.0 SysFS BusID: 0000:06:02.0 @@ -42,17 +39,8 @@ Revision: 0x02 Driver: "bcm43xx" Driver Modules: "bcm43xx" - Device File: eth1 - Features: WLAN Memory Range: 0xc0304000-0xc0305fff (rw,non-prefetchable) - IRQ: 169 (487 events) - HW Address: 00:0e:9b:ca:6a:00 - Link detected: no - WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 - WLAN frequencies: 2.412e-05 2.417e-05 2.422e-05 2.427e-05 2.432e-05 2.437e-05 2.442e-05 2.447e-05 2.452e-05 2.457e-05 2.462e-05 2.467e-05 2.472e-05 2.484e-05 - WLAN bitrates: 1.2e-05 1.8e-05 2.4e-05 3.6e-05 4.8e-05 7.2e-05 9.6e-05 0.000108 2e-06 4e-06 1.1e-05 2.2e-05 - WLAN encryption modes: WEP40 WEP104 TKIP CCMP - WLAN authentication modes: open sharedkey wpa-psk wpa-eap wpa-leap + IRQ: 21 (489 events) Module Alias: "pci:v000014E4d00004318sv00001468sd00000311bc02sc80i00" Driver Info #0: Driver Status: bcm43xx is active Maybe there is a specific patch in src.rpm, I don't know. Should I file a bug about it? I don't know if it affects 10.3 alpha....... Regards, Thruth --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org