Le mardi 03 avril 2018 à 15:03 +0200, Carlos E. R. a écrit :
Hi,
I just configured WiFi on this setup, and right now I have both eth0 and wlan active:
Minas-Anor:~ # ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 00:26:9e:95:62:d9 brd ff:ff:ff:ff:ff:ff inet 192.168.1.128/24 brd 192.168.1.255 scope global noprefixroute dynamic eth0 valid_lft 26835sec preferred_lft 26835sec inet6 fe80::2ec9:5fd7:5f20:24ed/64 scope link noprefixroute valid_lft forever preferred_lft forever 3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether 0c:ee:e6:d7:bb:5f brd ff:ff:ff:ff:ff:ff inet 192.168.1.50/24 brd 192.168.1.255 scope global noprefixroute dynamic wlan0 valid_lft 43169sec preferred_lft 43169sec inet6 fe80::ecaa:bac3:4cfc:a41d/64 scope link noprefixroute valid_lft forever preferred_lft forever Minas-Anor:~ # Minas-Anor:~ # ip route default via 192.168.1.1 dev eth0 proto dhcp metric 100 default via 192.168.1.1 dev wlan0 proto dhcp metric 20600 192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.128 metric 100 192.168.1.0/24 dev wlan0 proto kernel scope link src 192.168.1.50 metric 600 Minas-Anor:~ #
I'm using Network Manager.
ping a local host works. Traceroute doesn't. ssh does.
Shouldn't one of the interfaces get automatically removed?
No, metrics is modified on the fly when wifi or ethernet goes up / down. Interfaces should always be up. -- Frederic Crozat Enterprise Desktop Release Manager SUSE -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org