Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&version=Tumbleweed&build=20171216 When you reply to report some issues, make sure to change the subject. It is not helpful to keep the release announcement subject in a thread while discussing a specific problem. Packages changed: NetworkManager dracut glib2 glibc glibc issue-generator kdelibs4 libgit2-glib libqca2 libqt4 libsodium (1.0.15 -> 1.0.16) llvm (4.0.1 -> 5.0.0) llvm4 llvm5 (4.0.1 -> 5.0.0) snapper texlive texlive-specs-m texlive-specs-n vsftpd xmms2 === Details === ==== NetworkManager ==== Subpackages: NetworkManager-devel NetworkManager-lang libnm-glib-vpn1 libnm-glib4 libnm-util2 libnm0 typelib-1_0-NM-1_0 typelib-1_0-NMClient-1_0 typelib-1_0-NetworkManager-1_0 - Remove reference to deprecated and dropped ifcfg-suse plugin from configuration. ==== dracut ==== - Switch back to fipvlan for bnx2fc (bsc#1052840) * adds 0548-95fcoe-Switch-back-to-using-fipvlan-for-bnx2fc.patch - 95fcoe: Allow bnc2x driver more time to complete DCB negotiation (bsc#1052840) * adds 0549-fcoe-up-Increase-sleeptime-to-13s.patch - 95fcoe: add timeout initqueue entries (bsc#1052840) * adds 0550-95fcoe-add-timeout-initqueue-entries.patch - Fix task limit in emergency.service (same as in dracut-emergency.service) (bsc#1019938) * adds 0547-Fix-task-limit-in-emergency.service-the-same-change-.patch - Fix logic for applying 0541-Make-sure-70-persistent-net.rules-is-included-in-ini.patch - Support AMD CPU families 0x16 and 0x17 (bsc#1072424) * Adds 0545-Add-early-microcode-support-for-AMD-family-16h.patch * Adds 0546-Support-Microcode-Updates-for-AMD-CPU-Family-0x17.patch - Make ip=dhcp work. Previously, a network interface specifier was required. The new behaviour matches documented behaviour. Adds 0544-40network-Make-ip-dhcp-work.patch - Remove 00systemd-bootchart, which is gone from systemd for some time (bsc#1067279) Adds 0543-Remove-00systemd-bootchart.patch - Ensure 0541-Make-sure-70-persistent-net.rules-is-included-in-ini.patch is not applied on Leap either ==== glib2 ==== Subpackages: glib2-devel glib2-lang glib2-tools libgio-2_0-0 libgio-2_0-0-32bit libglib-2_0-0 libglib-2_0-0-32bit libgmodule-2_0-0 libgmodule-2_0-0-32bit libgobject-2_0-0 libgobject-2_0-0-32bit libgthread-2_0-0 libgthread-2_0-0-32bit - Add glib2-gsettings-overrides-per-session.patch: gsettings default value can be overridden depending on session (bgo#746592 bsc#1070090). ==== glibc ==== Subpackages: glibc-32bit glibc-locale-32bit - tst-tlsopt-powerpc.patch: fix tst-tlsopt-powerpc (bcn#1070419) - powerpc-hwcap-bits.patch: Update HWCAP for powerpc (bnc#1070420) - malloc-tcache-check-overflow.patch: Fix integer overflow in malloc when tcache is enabled (CVE-2017-17426, bnc#1071479, BZ #22375) - Add _multibuild - glob64-s390.patch: no compat glob64 on s390 - noversion.tar.bz2: remove unused source ==== glibc ==== Subpackages: glibc-devel glibc-extra glibc-info glibc-locale nscd - tst-tlsopt-powerpc.patch: fix tst-tlsopt-powerpc (bcn#1070419) - powerpc-hwcap-bits.patch: Update HWCAP for powerpc (bnc#1070420) - malloc-tcache-check-overflow.patch: Fix integer overflow in malloc when tcache is enabled (CVE-2017-17426, bnc#1071479, BZ #22375) - Add _multibuild - glob64-s390.patch: no compat glob64 on s390 - noversion.tar.bz2: remove unused source ==== issue-generator ==== - Enable more network devices to be shown on s390x [bsc#1071776] - Remove systemd require again, systemd-preset-branding is fixed. ==== kdelibs4 ==== Subpackages: kdelibs4-core libkde4 libkdecore4 libksuseinstall1 - Add 0001-Make-kssl-compile-against-OpenSSL-1.1.0.patch (backported from KF5's kdelibs4support) to allow building with openSSL 1.1.0 ==== libgit2-glib ==== - Fix spelling project names again. Adjust RPM group. ==== libqca2 ==== - BuildIgnore libopenssl-1_1_0-devel to avoid conflict ==== libqt4 ==== Subpackages: libqt4-32bit libqt4-qt3support libqt4-qt3support-32bit libqt4-sql libqt4-sql-32bit libqt4-sql-sqlite libqt4-sql-sqlite-32bit libqt4-x11 libqt4-x11-32bit - Add proper patch headers to: * no-ssl3.patch * qt4-openssl-1.1.0pre-3.patch - Remove patch, not needed: * qt-everywhere-opensource-src-4.8.7-gcc7.patch - add patches from mageia to fix build with openssl-1.1 - add no-ssl3.patch - add qt4-openssl-1.1.0pre-3.patch - add qt-everywhere-opensource-src-4.8.7-openssl.patch - add qt-everywhere-opensource-src-4.8.7-gcc7.patch ==== libsodium ==== Version update (1.0.15 -> 1.0.16) - Update to 1.0.16 * Signatures computations and verifications are now way faster on 64-bit platforms with compilers supporting 128-bit arithmetic (gcc, clang, icc). This includes the WebAssembly target. * New low-level APIs for computations over edwards25519: crypto_scalarmult_ed25519(), crypto_scalarmult_ed25519_base(), crypto_core_ed25519_is_valid_point(), crypto_core_ed25519_add(), crypto_core_ed25519_sub() and crypto_core_ed25519_from_uniform() (elligator representative to point). * crypto_sign_open(), crypto_sign_verify_detached() and crypto_sign_edwards25519sha512batch_open` now reject public keys in non-canonical form in addition to low-order points. * The library can be built with ED25519_NONDETERMINISTIC defined in order to use synthetic nonces for EdDSA. This is disabled by default. * sodium_stackzero() was added to wipe content off the stack. * The Salsa20-based PRNG example is now thread-safe on platforms with support for thread-local storage, optionally mixes bits from RDRAND. * Argon2 and scrypt are slightly faster on Linux. ==== llvm ==== Version update (4.0.1 -> 5.0.0) - Rename python-lldb to python3-lldb to match the renamed package in llvm4 and llvm5 after switch to python3. Fix its dependency. - Update to version 5.0.0 * See: + http://llvm.org/releases/5.0.0/docs/ReleaseNotes.html + http://llvm.org/releases/5.0.0/tools/clang/docs/ReleaseNotes.html + http://llvm.org/releases/5.0.0/tools/clang/tools/extra/docs/ReleaseNotes.htm... ==== llvm4 ==== Subpackages: libLLVM4 libclang4 - Rename python3-lldb to python3-lldb4 so it can work with llvm meta package. - Rename python packages to follow naming conventions. - Remove unnecessary dependencies on python3. ==== llvm5 ==== Version update (4.0.1 -> 5.0.0) Subpackages: libc++-devel libc++1 libc++abi-devel libc++abi1 - Rename python3-lldb to python3-lldb5 so it can work with llvm meta package. - Rename python packages to follow naming conventions. - Remove unnecessary dependencies on python3. - Make opt-viewer not require python2. * opt-viewer-Do-not-require-python-2.patch ==== snapper ==== Subpackages: libsnapper4 snapper-zypp-plugin - Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468) ==== texlive ==== - Replace Mesa-libGL-devel and libOSMesa-devel BuildRequires with pkgconfig(gl) and pkgconfig(osmesa). - Drop Mesa-libglapi-devel Buildequires: not needed by texlive for a while already. - Escape the usage of %{VERSION} when calling out to rpm. RPM 4.14 has %{VERSION} defined as 'the main packages version'. - Disable by a build conditions using zypper way of posttrans scripts as we already use %posttrans. Nevertheless correct naming scheme (boo#1069445) ==== texlive-specs-m ==== - Disable by a build conditions using zypper way of posttrans scripts as we already use %posttrans. Nevertheless correct naming scheme (boo#1069445) ==== texlive-specs-n ==== - Disable by a build conditions using zypper way of posttrans scripts as we already use %posttrans. Nevertheless correct naming scheme (boo#1069445) ==== vsftpd ==== - Make sure to also require group nobody and user ftp bsc#1070653 ==== xmms2 ==== Subpackages: libxmmsclient-glib1 libxmmsclient6 xmms2-plugin-base - BuildRequire python-xml explicitly - Use openssl < 1.1 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org