Gesendet: Donnerstag, 03. November 2016 um 18:20 Uhr Von: "Carlos E. R." <robin.listas@telefonica.net> An: opensuse-factory@opensuse.org Betreff: Re: [opensuse-factory] openSUSE Leap 42.2 RC2 released
On 2016-11-03 13:31, Knurpht - Gertjan Lettink wrote:
Op donderdag 3 november 2016 13:01:28 CET schreef Axel Braun:
Am Donnerstag, 3. November 2016, 11:39:02 schrieb Kyek, Andreas, Vodafone DE:
Axel Braun wrote:
Or was it really an upgrade also from 32 to 64 bit OS?
32bit 13.2 to 64bit 42.2 Leap does not support 32 bit. During upgrade, you have to select the 13.2 partition manually as upgrade target
/Ax Wow. I've always reasoned that it should be possible, but never actually tried.
I did the same jump some years back. Of course, not to Leap, but to 11.2. Many people have done a similar jump. It is not supported, but it works.
Axel, you can run this:
rpm -q -a --queryformat "%{INSTALLTIME}\t%{INSTALLTIME:day} \ %{BUILDTIME:day} %-30{NAME}\t%15{VERSION}-%-7{RELEASE}\t%{arch} \ %25{VENDOR}%25{PACKAGER} == %{DISTRIBUTION} %{DISTTAG}\n" \ | sort | cut --fields="2-" | tee rpmlist \ | egrep -v "x86_64" | less -S
I have send this as PM I now determine some trouble in sound configuration for the 00:1f.3 Audio device: Intel Corporation Sunrise Point-H HD Audio (rev 31) Device, which is set as primary sound device. There is actually a second sound device 01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] RV710/730 HDMI Audio [Radeon HD 4000 series] which is is the graphics card - I cant remove this right now. When configuraing the Intel device, YaST claims that this cant be done (THe kernel module for snd_hda_intel could not be loaded. This can vbe causes by incorrect module parameters, invalid IO or IRQ) A manual modprobe snd_hda_intel works, but still no sound. southpole:~ # lspci -s 00:1f.3 -vvv 00:1f.3 Audio device: Intel Corporation Sunrise Point-H HD Audio (rev 31) Subsystem: Micro-Star International Co., Ltd. [MSI] Device f996 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 319 Region 0: Memory at dff20000 (64-bit, non-prefetchable) [size=16K] Region 4: Memory at dff00000 (64-bit, non-prefetchable) [size=64K] Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0300c Data: 4192 Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel Any idea? Cheers Axel -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org