On Mon 28 May 2007 06:08:38 NZST +1200, Michael Schroeder wrote:
tcpdump -x -s 1024 -v -i eth0 port 427
Thanks Michael. I can't get it to go. As a sidenote, slptool findsrvtypes gives useful output, but putting one of those lines at the end of slptool findsrvs never gives me anything. I've tried 2 different networks now. Can someone confirm cat /etc/slp.reg.d/suse.reg service install.suse:ftp://$HOSTNAME/suse10.2/,en,65535 description SUSE 10.2 box i386 + AMD64 is correct? That's what http://en.opensuse.org/Network_Installation_Source#Announcing_the_Installati... says (though I edited that page at some stage). Am I the only one with this problem now? I'd like to use it for several SUSE versions incl the testing ones. If someone has a working config I'd appreciate an offlist copy. Here's another openSUSE 10.2 SLP server (slpserver), while booting a 10.2 CD1 (installclient) on the same 8-port hub/switch. Only change on the client is that SLP is selected as source. The service ftp://$HOSTNAME/suse10.2/ is functional. iptables disabled. SLP server left on multicast config (as per yast default). Edited for legibility: # tcpdump -X -s 1024 -v -i eth0 port 427 tcpdump: listening on eth0, link-type EN10MB (Ethernet), capture size 1024 bytes 19:02:03.429927 IP (tos 0x0, ttl 8, id 0, offset 0, flags [DF], proto: UDP (17), length: 77) slpserver.1086 > 239.255.255.253.svrloc: UDP, length 49 E..M..@........% .....,...9s+.... 1.........en.... service:director y-agent...... 19:02:18.438381 IP (tos 0x0, ttl 8, id 0, offset 0, flags [DF], proto: UDP (17), length: 77) slpserver.1069 > 239.255.255.253.svrloc: UDP, length 49 E..M..@........% .....-...9s).... 1.........en.... service:director y-agent...... 19:02:40.840857 IP (tos 0x0, ttl 1, id 0, offset 0, flags [DF], proto: UDP (17), length: 161) installclient.32768 > 239.255.255.253.svrloc: UDP, length 133 E.....@....:...l ................ ..........en.... service:install. suse..default.P( &(|(!(machine=*) )(machine=i686)) (|(!(release=*)) (release=2.6.18. 2-34-default))). . 19:02:41.341983 IP (tos 0x0, ttl 1, id 0, offset 0, flags [DF], proto: UDP (17), length: 161) installclient.32768 > 239.255.255.253.svrloc: UDP, length 133 E.....@....:...l ................ ..........en.... service:install. suse..default.P( &(|(!(machine=*) )(machine=i686)) (|(!(release=*)) (release=2.6.18. 2-34-default))). . 19:02:41.841984 IP (tos 0x0, ttl 1, id 0, offset 0, flags [DF], proto: UDP (17), length: 161) installclient.32768 > 239.255.255.253.svrloc: UDP, length 133 E.....@....:...l ................ ..........en.... service:install. suse..default.P( &(|(!(machine=*) )(machine=i686)) (|(!(release=*)) (release=2.6.18. 2-34-default))). . Unless there's traffic on a port other than 427, the server isn't responding. Any hints on why appreciated. Thanks, Volker -- Volker Kuhlmann is list0570 with the domain in header http://volker.dnsalias.net/ Please do not CC list postings to me. --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org