I have Compaq Evo W4000 workstation with LG GSA-4167B DVD-writer as master and LITEON LTR-40125S CD-writer as slave at secondary IDE bus. Both devices works well with openSuse 10.1 and W2k. Boot time is about 1 minute. With openSuse 10.2 beta 1 here is problems. LITEON does not work. LG mostly reads but not writes properly,auto mount often does not work.Boot time to login screen is very long, between 2 minutes 40 seconds and nearly 5 minutes. Boot.msg:s typically contains lines: <6>scsi1 : ata_piix <6>ata2.00: ATAPI, max UDMA/33 <6>ata2.01: ATAPI, max UDMA/33 <6>ata2.00: configured for UDMA/33 <4>ata2.01: qc timeout (cmd 0xef) <3>ata2.01: failed to set xfermode (err_mask=0x4) <4>ata2.01: limiting speed to UDMA/25 <4>ata2: failed to recover some devices, retrying in 5 secs <6>ata2.00: configured for UDMA/33 <4>ata2.01: qc timeout (cmd 0xef) <3>ata2.01: failed to set xfermode (err_mask=0x4) <4>ata2.01: limiting speed to PIO0 <4>ata2: failed to recover some devices, retrying in 5 secs <6>ata2.00: configured for UDMA/33 <4>ata2.01: qc timeout (cmd 0xef) <3>ata2.01: failed to set xfermode (err_mask=0x4) <4>ata2.01: disabled <4>ata2: failed to recover some devices, retrying in 5 secs <3>ata2.00: failed to set xfermode (err_mask=0x40) <4>ata2.00: limiting speed to UDMA/25 <4>ata2: failed to recover some devices, retrying in 5 secs <6>ata2.00: configured for UDMA/25 Often three times more same kinds of lines. -- Viljo --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org