Ok, so sk98lin loads as shown in lsmod below however no ethernet ports exist except for lo info shown below: linux:/etc # modinfo sk98lin filename: /lib/modules/2.6.15-rc5-git3-2-smp/kernel/drivers/net/sk98lin/sk98lin.ko author: Mirko Lindner <mlindner@syskonnect.de> description: SysKonnect SK-NET Gigabit Ethernet SK-98xx driver license: GPL vermagic: 2.6.15-rc5-git3-2-smp SMP 586 REGPARM gcc-4.1 supported: yes depends: linux:/etc # lsmod|grep sk98lin sk98lin 173792 0 linux:/etc # ifconfig eth0 192.168.0.22 255.255.255.0 up SIOCSIFADDR: No such device eth0: unknown interface: No such device SIOCSIFADDR: No such device eth0: unknown interface: No such device eth0: unknown interface: No such device linux:/etc # ethtool eth0 Settings for eth0: Cannot get device settings: No such device Cannot get wake-on-lan settings: No such device Cannot get message level: No such device Cannot get link status: No such device No data available Any ideas?, tried acpi=off at boot, next to try would be to disable firewire. Daryl Creedy --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory-unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory-help@opensuse.org