On Sun 29 Apr 2018 10:23:58 PM CDT, Achim Gratz wrote:
After the latest update(s) the RTL SDR dongles stopped working because the dvb_usb_rtl28xxu doesn't let go of the device anymore. Are there any changes that would make that happen? I'm up-to-date with everything on hardware:/sdr/openSUSE_Tumbleweed as far as I can tell.
--8<---------------cut here---------------start------------->8--- Sun Apr 29 22:14:44 2018 CEST dump1090-mutability v1.15-dev-330-gcc53c90 starting up. Using sample converter: UC8, integer/table path Found 1 device(s): 0: Realtek, RTL2838UHIDIR, SN: 00000001 (currently selected)
Kernel driver is active, or device is claimed by second instance of librtlsdr. In the first case, please either detach or blacklist the kernel module (dvb_usb_rtl28xxu), or enable automatic detaching at compile time.
usb_claim_interface error -6 Error opening the RTLSDR device: Device or resource busy --8<---------------cut here---------------end--------------->8---
Regards, Achim.
Hi Working fine here with dump1090, dvb_usb_rtl28xxu should be blacklisted? cat /etc/modprobe.d/50-dvb_usb_rtl28xxu.conf blacklist dvb_usb_rtl28xxu rtl_test Found 1 device(s): 0: Realtek, RTL2838UHIDIR, SN: 00000001 Using device 0: Generic RTL2832U OEM Found Rafael Micro R820T tuner Supported gain values (29): 0.0 0.9 1.4 2.7 3.7 7.7 8.7 12.5 14.4 15.7 16.6 19.7 20.7 22.9 25.4 28.0 29.7 32.8 33.8 36.4 37.2 38.6 40.2 42.1 43.4 43.9 44.5 48.0 49.6 [R82XX] PLL not locked! Sampling at 2048000 S/s. Info: This tool will continuously read from the device, and report if samples get lost. If you observe no further output, everything is fine. -- Cheers Malcolm °¿° SUSE Knowledge Partner (Linux Counter #276890) Tumbleweed - 20180425 | GNOME Shell 3.28.1 | 4.16.3-1-default HP 14-an013nr Notebook | E2-7110 X4 @ 1.80 GHz | AMD Radeon R3 up 0:02, 2 users, load average: 3.48, 2.08, 0.83 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org