Hello community,
here is the log from the commit of package kiwi for openSUSE:Factory checked in at 2016-04-28 20:29:41
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Comparing /work/SRC/openSUSE:Factory/kiwi (Old)
and /work/SRC/openSUSE:Factory/.kiwi.new (New)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "kiwi"
Changes:
--------
--- /work/SRC/openSUSE:Factory/kiwi/kiwi.changes 2016-04-08 09:38:52.000000000 +0200
+++ /work/SRC/openSUSE:Factory/.kiwi.new/kiwi.changes 2016-04-28 20:29:42.000000000 +0200
@@ -1,0 +2,65 @@
+Mon Apr 18 10:43:15 CEST 2016 - ms@suse.de
+
+- v7.03.67 released
+
+-------------------------------------------------------------------
+Mon Apr 18 10:41:04 CEST 2016 - ms@suse.de
+
+- Add part_msdos module for self build EFI image
+
+ On ARM we have a few hooks in kiwi that allow us to adapt the
+ resulting image to target boards. On some systems, we need to
+ install the firmware to hardware specified sector offsets on
+ the image target (sd card).
+
+ Unfortunately some systems demand firmware at sector 1 which is
+ where the GPT would usually reside. So we need to use an MBR partition
+ layout.
+
+ We can convert the GPT into an MBR using gdisk in our ARM scripts,
+ but at that point grub2 would have to be able to interpret the MBR
+ as well. So we need the "msdos_part" module included (bnc#975898)
+
+-------------------------------------------------------------------
+Mon Apr 18 10:36:40 CEST 2016 - ms@suse.de
+
+- Follow up fix for not writing grub.cfg to EFI dir
+
+ With the move to grub2-install and also shim-install
+ the static copy of the grub configuration into the
+ EFI boot directory became obsolete (bnc#968270)
+
+-------------------------------------------------------------------
+Mon Apr 11 10:47:06 CEST 2016 - ms@suse.de
+
+- v7.03.66 released
+
+-------------------------------------------------------------------
+Mon Apr 11 10:44:30 CEST 2016 - ms@suse.de
+
+- Fixed kiwi-pxeboot package setup
+
+ The package was marked noarch but has architecture dependant
+ requirements. Therefore it can't be marked noarch (bnc#974651)
+
+-------------------------------------------------------------------
+Mon Apr 11 10:40:51 CEST 2016 - ms@suse.de
+
+- Fixed oem and vmx buildservice boot requires
+
+ The packages kiwi-desc-oemboot-requires and kiwi-desc-vmxboot-requires
+ did not explicitly require grub2 or the architecture specific efi module
+ packages for the arm architectures. The requirement was added by the
+ contents of the arm boot image descriptions. However those packages
+ will not be part of the boot image descriptions in the near future
+ and thus the buildservice needs them to be referenced explicitly
+ in the spec file
+
+-------------------------------------------------------------------
+Mon Apr 11 08:35:23 CEST 2016 - alexandros.venn@suse.de
+
+- Translated using Weblate (Greek)
+
+ Currently translated at 89.2% (25 of 28 strings)
+
+-------------------------------------------------------------------
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Other differences:
------------------
++++++ kiwi.spec ++++++
--- /var/tmp/diff_new_pack.RXDQiA/_old 2016-04-28 20:29:44.000000000 +0200
+++ /var/tmp/diff_new_pack.RXDQiA/_new 2016-04-28 20:29:44.000000000 +0200
@@ -27,7 +27,7 @@
Name: kiwi
License: GPL-2.0
Group: System/Management
-Version: 7.03.65
+Version: 7.03.67
Provides: kiwi-schema = 6.2
Provides: kiwi-image:aci
Provides: kiwi-image:lxc
@@ -310,9 +310,6 @@
%endif
License: GPL-2.0+
Group: System/Management
-%if 0%{?suse_version} > 1120
-BuildArch: noarch
-%endif
%description -n kiwi-pxeboot
This package contains the basic PXE directory structure which is
@@ -440,18 +437,24 @@
%ifarch s390 s390x
Requires: s390-tools
%endif
-%ifarch %ix86 x86_64
+%ifarch %ix86 x86_64 %arm aarch64
%if 0%{?suse_version} < 1315 && 0%{?rhel_version} < 700 && 0%{?centos_version} < 700
Requires: grub
%endif
%if 0%{?suse_version} >= 1220 || 0%{?rhel_version} >= 700 || 0%{?centos_version} >= 700
Requires: grub2
+%endif
%ifarch x86_64
Requires: grub2-x86_64-efi
%endif
%ifarch %ix86
Requires: grub2-i386-efi
%endif
+%ifarch aarch64
+Requires: grub2-arm64-efi
+%endif
+%ifarch %arm
+Requires: grub2-arm-efi
%endif
%endif
License: GPL-2.0+
@@ -557,20 +560,27 @@
%ifarch s390 s390x
Requires: s390-tools
%endif
-%ifarch %ix86 x86_64
+%ifarch %ix86 x86_64 %arm aarch64
%if 0%{?suse_version} < 1315 && 0%{?rhel_version} < 700 && 0%{?centos_version} < 700
Requires: grub
%endif
%if 0%{?suse_version} >= 1220 || 0%{?rhel_version} >= 700 || 0%{?centos_version} >= 700
Requires: grub2
+%endif
%ifarch x86_64
Requires: grub2-x86_64-efi
%endif
%ifarch %ix86
Requires: grub2-i386-efi
%endif
+%ifarch aarch64
+Requires: grub2-arm64-efi
%endif
+%ifarch %arm
+Requires: grub2-arm-efi
%endif
+%endif
+
Summary: KIWI - buildservice package requirements for oemboot
License: GPL-2.0+
Group: System/Management
++++++ kiwi-docu.tar.bz2 ++++++
++++ 18075 lines of diff (skipped)
++++++ kiwi-repo.tar.bz2 ++++++
++++++ kiwi.tar.bz2 ++++++
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/kiwi/.revision new/kiwi/.revision
--- old/kiwi/.revision 2016-01-01 17:37:14.000000000 +0100
+++ new/kiwi/.revision 2016-03-10 16:36:42.000000000 +0100
@@ -1 +1 @@
-ebe9e4cb587b26a8c6e8731b1ad744d7802dfb0f
+24db6c8a171001a4a8988e92d19116804f5f9c56
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/kiwi/locale/el/LC_MESSAGES/kiwi.po new/kiwi/locale/el/LC_MESSAGES/kiwi.po
--- old/kiwi/locale/el/LC_MESSAGES/kiwi.po 2016-04-05 14:12:41.000000000 +0200
+++ new/kiwi/locale/el/LC_MESSAGES/kiwi.po 2016-04-11 10:47:28.000000000 +0200
@@ -8,8 +8,8 @@
"Project-Id-Version: @PACKAGE@\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2005-07-27 16:23+0200\n"
-"PO-Revision-Date: 2016-03-26 23:53+0000\n"
-"Last-Translator: Efstathios Iosifidis
participants (1)
-
root@hilbert.suse.de