commit aaa_base for openSUSE:Factory
Hello community, here is the log from the commit of package aaa_base for openSUSE:Factory checked in at 2014-09-15 17:39:45 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/aaa_base (Old) and /work/SRC/openSUSE:Factory/.aaa_base.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "aaa_base" Changes: -------- --- /work/SRC/openSUSE:Factory/aaa_base/aaa_base.changes 2014-09-09 18:59:12.000000000 +0200 +++ /work/SRC/openSUSE:Factory/.aaa_base.new/aaa_base.changes 2014-09-15 17:39:46.000000000 +0200 @@ -1,0 +2,12 @@ +Thu Sep 11 09:47:25 UTC 2014 - ro@suse.de + +- adding more info to chkconfig list mode output for systemd (bnc#863781) + +------------------------------------------------------------------- +Thu Sep 11 09:39:15 UTC 2014 - lnussel@suse.de + +- remove no longer supported sysconfig settings (bnc#721682) +- remove /etc/mailcap (bnc#856725, bnc#842938) +- add Makefile target to update mimetypes + +------------------------------------------------------------------- Old: ---- aaa_base-13.2+git20140908.1b4153e.tar.xz New: ---- aaa_base-13.2+git20140911.61c1681.tar.xz ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ aaa_base.spec ++++++ --- /var/tmp/diff_new_pack.rKrjuq/_old 2014-09-15 17:39:48.000000000 +0200 +++ /var/tmp/diff_new_pack.rKrjuq/_new 2014-09-15 17:39:48.000000000 +0200 @@ -14,10 +14,11 @@ # Please submit bugfixes or comments via http://bugs.opensuse.org/ # +# icecream 0 Name: aaa_base -Version: 13.2+git20140908.1b4153e +Version: 13.2+git20140911.61c1681 Release: 0 Url: https://github.com/openSUSE/aaa_base Provides: aaa_skel = %{version}-%{release} @@ -141,7 +142,6 @@ %config /etc/csh.cshrc %config /etc/csh.login %config /etc/inputrc -%config /etc/mailcap %config /etc/mime.types %config /etc/profile %config /etc/profile.d/alljava.csh ++++++ aaa_base-13.2+git20140908.1b4153e.tar.xz -> aaa_base-13.2+git20140911.61c1681.tar.xz ++++++ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/aaa_base-13.2+git20140908.1b4153e/Makefile new/aaa_base-13.2+git20140911.61c1681/Makefile --- old/aaa_base-13.2+git20140908.1b4153e/Makefile 2014-09-08 10:28:41.000000000 +0200 +++ new/aaa_base-13.2+git20140911.61c1681/Makefile 2014-09-11 11:42:48.000000000 +0200 @@ -16,4 +16,10 @@ package: obs/mkpackage -.PHONY: all install clean package +mimetypes: + if test -d Apache/apache2; then (cd Apache/apache2 && osc up); else osc co Apache/apache2; fi + tar --wildcards -Oxjf Apache/apache2/httpd-*.tar.bz2 '*/docs/conf/mime.types' > mime.types.apache + ./mimetypemerge files/etc/mime.types mime.types.apache > mime.types + mv mime.types files/etc/mime.types + +.PHONY: all install clean package mimetypes diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/aaa_base-13.2+git20140908.1b4153e/aaa_base.post new/aaa_base-13.2+git20140911.61c1681/aaa_base.post --- old/aaa_base-13.2+git20140908.1b4153e/aaa_base.post 2014-09-08 10:28:41.000000000 +0200 +++ new/aaa_base-13.2+git20140911.61c1681/aaa_base.post 2014-09-11 11:42:48.000000000 +0200 @@ -8,6 +8,7 @@ # # Run this script in C-Locale, or some tools will fail. export LC_ALL=C +test -n "$FIRST_ARG" || FIRST_ARG=$1 # # to make sure, /var/lib/YaST/bin/bootsetup runs fine, delete # /usr/lib/YaST/.configured2 @@ -29,6 +30,33 @@ %{remove_and_set -n suseconfig CHECK_INITTAB} %{remove_and_set -n suseconfig HALT_SOUND} +if [ "$FIRST_ARG" -gt 1 ]; then + old_cron_vars="MAX_DAYS_IN_TMP MAX_DAYS_IN_LONG_TMP TMP_DIRS_TO_CLEAR LONG_TMP_DIRS_TO_CLEAR OWNER_TO_KEEP_IN_TMP CLEAR_TMP_DIRS_AT_BOOTUP" + %{remove_and_set -n cron $old_cron_vars} + if [ "$MAX_DAYS_IN_TMP" != '0' -a "$MAX_DAYS_IN_TMP" != 'no' -o \ + "$MAX_DAYS_IN_LONG_TMP" != '0' -a "$MAX_DAYS_IN_LONG_TMP" != 'no' -o \ + "$CLEAR_TMP_DIRS_AT_BOOTUP" != 'no' ]; then + mkdir -p '/var/adm/update-messages' + msgfile='/var/adm/update-messages/%name-%version-%release-tmpdirs' + for i in $old_cron_vars; do + eval v=\$$i + [ -n "$v" -a "$v" != 'no' ] || continue + if [ ! -e "$msgfile" ]; then + cat > "$msgfile" <<-EOF + sysconfig settings for cleaning up temporary directories are no longer + supported. Some of the features are provided by systemd's tmpfile + mechanism instead. Please refer to 'man tmpfiles.d' for more + information. + + Here are the old settings for reference: + + EOF + fi + echo "$i=$v" >> "$msgfile" + done + fi +fi + if ! [ -d /etc/sysconfig ] ; then mkdir -p /etc/sysconfig fi diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/aaa_base-13.2+git20140908.1b4153e/files/etc/mailcap new/aaa_base-13.2+git20140911.61c1681/files/etc/mailcap --- old/aaa_base-13.2+git20140908.1b4153e/files/etc/mailcap 2014-09-08 10:28:41.000000000 +0200 +++ new/aaa_base-13.2+git20140911.61c1681/files/etc/mailcap 1970-01-01 01:00:00.000000000 +0100 @@ -1,109 +0,0 @@ -# Copyright (c) 1991 Bell Communications Research, Inc. (Bellcore) -# -# Permission to use, copy, modify, and distribute this material -# for any purpose and without fee is hereby granted, provided -# that the above copyright notice and this permission notice -# appear in all copies, and that the name of Bellcore not be -# used in advertising or publicity pertaining to this -# material without the specific, prior written permission -# of an authorized representative of Bellcore. BELLCORE -# MAKES NO REPRESENTATIONS ABOUT THE ACCURACY OR SUITABILITY -# OF THIS MATERIAL FOR ANY PURPOSE. IT IS PROVIDED "AS IS", -# WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES. -# -# Prototype Mailcap file -# Note that support for text & multipart are "built in" to metamail, -# as are rudimentary support for message, and application. -# However, any of these may be overridden in mailcap. -# -# Note that users may override or extend this with a .mailcap -# file in their own directory. However, there is NO NEED -# for them to copy entries from this file, as metamail will -# pick up entries from both the system and personal mailcap files. -# - -# NOTE: This file has been heavily modified for use as an example -# configuration file for Lynx - -# In the samples given test=test -n "$DISPLAY" is used to -# determine if the current session is X capible by checking -# for the existance of a DISPLAY environment variable. -# -# any system (VMS included) without the DISPLAY environment variable -# will be assumed to be Non-X - -# The following line is for sites where xv understands jpeg but xloadimage -# is preferred. -# -# the test line specifies that this viewer should only be used if -# the display variable is set. -image/jpeg; display %s; test=test -n "$DISPLAY" - -# The following sends all other image subtypes to xloadimage -#image/*; xloadimage %s; ; test=test -n "$DISPLAY" - -# The following sends all other image subtypes to xv -image/*; display %s; ; test=test -n "$DISPLAY" - - -# If you have an interactive Postscript interpreter, you should think carefully -# before replacing lpr with it in the following line, because PostScript -# can be an enormous security hole. It is RELATIVELY harmless -# when sent to the printer... - -# This one is for NON-X -#application/postscript ; lpr %s \; echo SENT FILE TO PRINTER; ;test=test -z "$DISPLAY" - -# This one is for X -#application/postscript ; ghostview %s; ; test=test -n "$DISPLAY" - -# The following should be commented out if you do NOT have safe-tcl -# and should be uncommented if you DO have safe-tcl -#application/safe-tcl; swish -safe -messaging -f %s - -# A common problem with the mailcap mechanism is getting differential -# behavior from different programs. This problem is compounded by the fact -# that some programs, notably Mosaic, do not implement the "test" clause in -# mailcap files. If you are using Lynx and X Mosaic together you should -# place all X-centric entries before non-X entries. X Mosaic will use -# whichever entry is defined first so further entries will be ignored. -# -# Lynx exports the environment variable LYNX_VERSION, so if you wish -# to test if Lynx is running or not you can use 'test -n "LYNX_VERSION"' -# -# HTML -#text/html; lynx -dump %s; copiousoutput; nametemplate=%s.html -text/html; w3m -I %{charset} -T text/html -dump %s; copiousoutput -# Compressed -application/x-gunzip; gunzip -c %s; copiousoutput -application/x-gzip; gunzip -c %s; copiousoutput -application/x-bunzip2; bunzip2 -c %s; copiousoutput -application/x-bzip2; bunzip2 -c %s; copiousoutput -# Archive directory -application/x-tar-gz; gunzip -c %s | tar -tf -; copiousoutput -# Using gs to display postscript is dangerous as postscript may -# contain statements which are not safe to execute in your -# ps interpreter gs -#application/postscript; gv %s -# Real audio player -video/*; xine %s -#video/mpeg; xmpeg %s -# PGP decoding in case your MUA is not clever enough by itself. -# Commented out, as you might use a clever mailer or want to use gpg instead. -#application/pgp; pgp -f < %s | metamail; needsterminal; test=test %{encapsulation}=entity -#application/pgp; pgp %s; needsterminal -# -#application/x-uudecode; uudecode -o- %s; copiousoutput -audio/x-pn-realaudio;/usr/bin/realplay "%u" -audio/vnd.rn-realaudio;/usr/bin/realplay "%u" -application/smil;/usr/bin/realplay "%u" -text/vnd.rn-realtext;/usr/bin/realplay "%u" -video/vnd.rn-realvideo;/usr/bin/realplay "%u" -image/vnd.rn-realflash;/usr/bin/realplay "%u" -application/x-shockwave-flash2-preview;/usr/bin/realplay "%u" -application/sdp;/usr/bin/realplay "%u" -application/x-sdp;/usr/bin/realplay "%u" -application/vnd.rn-realmedia;/usr/bin/realplay "%u" -image/vnd.rn-realpix;/usr/bin/realplay "%u" -# -application/x-java-jnlp-file;/usr/bin/javaws "%s" diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/aaa_base-13.2+git20140908.1b4153e/files/usr/bin/chkconfig new/aaa_base-13.2+git20140911.61c1681/files/usr/bin/chkconfig --- old/aaa_base-13.2+git20140908.1b4153e/files/usr/bin/chkconfig 2014-09-08 10:28:41.000000000 +0200 +++ new/aaa_base-13.2+git20140911.61c1681/files/usr/bin/chkconfig 2014-09-11 11:42:48.000000000 +0200 @@ -797,6 +797,10 @@ systemd services. SysV configuration data might be overridden by native systemd configuration. +If you want to list systemd services use 'systemctl list-unit-files'. +To see services enabled on particular target use +'systemctl list-dependencies [target]'. + EOF } for $s (@services) { -- To unsubscribe, e-mail: opensuse-commit+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-commit+help@opensuse.org
participants (1)
-
root@hilbert.suse.de