Hello community, here is the log from the commit of package kiwi for openSUSE:Factory checked in at 2015-05-02 21:32:23 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/kiwi (Old) and /work/SRC/openSUSE:Factory/.kiwi.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "kiwi" Changes: -------- --- /work/SRC/openSUSE:Factory/kiwi/kiwi.changes 2015-04-15 17:42:46.000000000 +0200 +++ /work/SRC/openSUSE:Factory/.kiwi.new/kiwi.changes 2015-05-02 21:32:25.000000000 +0200 @@ -1,0 +2,254 @@ +Fri May 1 20:40:57 CEST 2015 - ms@suse.de + +- v7.02.42 released + +------------------------------------------------------------------- +Thu Apr 30 16:20:32 CEST 2015 - ms@suse.de + +- Update RHEL7 JeOS template + + Added lan0 udev rule, don't use lvm to simplify setup + +------------------------------------------------------------------- +Thu Apr 30 10:51:16 CEST 2015 - ms@suse.de + +- Fixed use of custom kernel options for recovery + + custom kernel paratmers are stored in $kiwi_cmdline inside + of the boot code. The information was not used for the recovery + grub config. Therefore a difference in kernel boot options for + standard boot and for recovery boot could happen which should + not be the case + +------------------------------------------------------------------- +Thu Apr 30 10:39:37 CEST 2015 - ms@suse.de + +- Fixed boot_efilabel for elilo compat mode + + The efi boot label should match the title set in the bootloader + menu. This is should be set to kiwi_oemtitle + +------------------------------------------------------------------- +Wed Apr 29 11:45:46 CEST 2015 - ms@suse.de + +- v7.02.41 released + +------------------------------------------------------------------- +Wed Apr 29 11:21:02 CEST 2015 - ms@suse.de + +- Run lvcreate with --noudevsync + + This allows to build LVM images in container systems + which doesn't have udev running + +------------------------------------------------------------------- +Wed Apr 29 10:54:48 CEST 2015 - ms@suse.de + +- Update SLE12 JeOS description + + The new pattern system requires libsolv >= 0.6.5 to be installed on + the building host. Thus solve patterns as package to stay compatible + with older build host systems + +------------------------------------------------------------------- +Wed Apr 29 10:51:42 CEST 2015 - ms@suse.de + +- Added dice buildsystem config to x86 JeOS images + +------------------------------------------------------------------- +Wed Apr 29 09:06:00 CEST 2015 - rjschwei@suse.de + +- The linuxefi and initrdefi commands only exists on x86 and x86_64. + Write the grub config setting for linuxefi and initrdefi only on these + platforms, for all others the appropriate command is linux and initrd. + +------------------------------------------------------------------- +Fri Apr 24 12:01:52 CEST 2015 - ms@suse.de + +- Keep terminal reset utility inside boot images + +------------------------------------------------------------------- +Fri Apr 24 09:51:42 CEST 2015 - ms@suse.de + +- Fixed useless use of greediness modifier '+' in regex + +------------------------------------------------------------------- +Thu Apr 23 13:13:40 CEST 2015 - rjschwei@suse.de + +- Builder infrastructure + + Integrate ext* file system image builds into the "builder" + infrastructure to simplify and improve the structure of image builds + +------------------------------------------------------------------- +Thu Apr 23 09:51:19 CEST 2015 - ms@suse.de + +- Style changes for mount dependency checker + + * Use here documents to construct messages + * Use pstree to show sub tree of processes + * Use perl builtin methods to read from proc + +------------------------------------------------------------------- +Wed Apr 22 21:16:46 CEST 2015 - ms@suse.de + +- Fixed product name in SLE12 s390 JeOS + +------------------------------------------------------------------- +Wed Apr 22 21:04:08 CEST 2015 - ms@suse.de + +- Better description for pattern use in 13.2 JeOS + +------------------------------------------------------------------- +Wed Apr 22 15:47:42 CEST 2015 - ms@suse.de + +- Fetch errno($!) directly after call + + Reading of $! later will not provide the information + +------------------------------------------------------------------- +Wed Apr 22 15:36:57 CEST 2015 - ms@suse.de + +- Added __checkMountDependencies runtime check + + The check looks for processes which holds onto mounts created by a + previos kiwi run. In such a condition kiwi is not able to release + its own mount table and shows information about the processes which + keeps these mount points busy. We still don't understand why there + could be non kiwi related processes holding onto mounts kiwi has + created during its run but kiwi should provide a way to tell this + information to the user and stop if the environment is still tainted + by such processes (bnc #895204) + +------------------------------------------------------------------- +Tue Apr 21 16:38:30 CEST 2015 - ms@suse.de + +- Added __checkDeprecatedFilesystem runtime check + + The use of clicfs is deprecated, a hint to use overlayfs if + possible is shown as a warning message to the user + +------------------------------------------------------------------- +Tue Apr 21 14:56:23 CEST 2015 - ms@suse.de + +- Delete kernel/adaptec-firmware from boot images + + For s390 there are no such packages in the SLE12 code base + +------------------------------------------------------------------- +Tue Apr 21 12:21:56 CEST 2015 - ms@suse.de + +- v7.02.40 released + +------------------------------------------------------------------- +Tue Apr 21 12:06:24 CEST 2015 - adrian@suse.de + +- remove call to addAppdata again + + merge error + +------------------------------------------------------------------- +Mon Apr 20 15:26:43 CEST 2015 - ms@suse.de + +- v7.02.39 released + +------------------------------------------------------------------- +Mon Apr 20 13:43:31 CEST 2015 - adrian@suse.de + +- prefer packages by priority of repositories, not by architectures. + +------------------------------------------------------------------- +Mon Apr 20 13:00:53 CEST 2015 - ms@suse.de + +- Ensure recovery entry is appended for elilo compat + + elilo does not support adding custom entries to the written + grub configuration. Thus we have to make sure the recovery + entry doesn't get lost after a recovery run. Therefore the + menu entry is added as part of the installBootloader function + because this function is called after a recovery run while + the installBootloaderRecovery functions are only called once + at initialization time of the recovery partition + +------------------------------------------------------------------- +Mon Apr 20 12:33:31 CEST 2015 - ms@suse.de + +- Fixed missing boot/efi mount path after recovery + + In recovery/repair mode the boot/efi path is not umounted + correctly when init/systemd is started. Both paths /boot and + /boot/efi are part of the fstab and if boot/efi is already + mounted when fstab is processed the mount of /boot will + cover and therefore hide the contents of boot/efi + +------------------------------------------------------------------- +Fri Apr 17 10:02:37 CEST 2015 - ms@suse.de + +- v7.02.38 released + +------------------------------------------------------------------- +Thu Apr 16 10:49:09 CEST 2015 - ms@suse.de + +- Revert "Added gptfdisk to SLE11 oemboot descriptions" + + This reverts commit 8a49b0d75f583cc4f18fdb57fb36722777e71725. + +------------------------------------------------------------------- +Thu Apr 16 10:37:18 CEST 2015 - ms@suse.de + ++++ 57 more lines (skipped) ++++ between /work/SRC/openSUSE:Factory/kiwi/kiwi.changes ++++ and /work/SRC/openSUSE:Factory/.kiwi.new/kiwi.changes ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ kiwi.spec ++++++ --- /var/tmp/diff_new_pack.X8TAHj/_old 2015-05-02 21:32:27.000000000 +0200 +++ /var/tmp/diff_new_pack.X8TAHj/_new 2015-05-02 21:32:27.000000000 +0200 @@ -26,7 +26,7 @@ Group: System/Management Url: http://github.com/openSUSE/kiwi Name: kiwi -Version: 7.02.37 +Version: 7.02.42 Release: 0 Provides: kiwi-image:lxc Provides: kiwi-image:tbz ++++++ kiwi-docu.tar.bz2 ++++++ ++++++ kiwi-repo.tar.bz2 ++++++ ++++++ kiwi.tar.bz2 ++++++ ++++ 4047 lines of diff (skipped)