Hello community, here is the log from the commit of package texlive-specs-c for openSUSE:Factory checked in at 2015-02-24 12:59:18 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/texlive-specs-c (Old) and /work/SRC/openSUSE:Factory/.texlive-specs-c.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "texlive-specs-c" Changes: -------- --- /work/SRC/openSUSE:Factory/texlive-specs-c/texlive-specs-c.changes 2014-06-18 07:49:48.000000000 +0200 +++ /work/SRC/openSUSE:Factory/.texlive-specs-c.new/texlive-specs-c.changes 2015-02-24 12:59:55.000000000 +0100 @@ -1,0 +2,14 @@ +Thu Feb 19 09:29:36 UTC 2015 - coolo@suse.com + +- rework generate to create the texlive-specs-$letter.spec directly + to build X sources +- this decouples the letter from being a prefix to be a slice of + all the texlive packages + +- as such patches move between packages, among them + bbold_bbold11.dif bbold_bbold11.dif context_fourier-map.dif context_fourier-map.dif + jadetex_ini.dif kpathsea_cnf.dif latexdiff_env.dif luaotfload_varfonts.dif latex2man_tmphandling.dif + musixtex_various.dif pgf_plain.dif musixtex_various.dif texconfig_scripts.dif + texdraw_info.dif tex4ht_env.dif texdoc_cnf.dif tetex_scripts.dif + +------------------------------------------------------------------- Old: ---- c-pascal.doc.tar.xz c-pascal.tar.xz c90.doc.tar.xz c90.tar.xz cabin.doc.tar.xz cabin.tar.xz cachepic.doc.tar.xz cachepic.tar.xz calcage.doc.tar.xz calcage.tar.xz calctab.doc.tar.xz calctab.tar.xz calculator.doc.tar.xz calculator.tar.xz calligra-type1.doc.tar.xz calligra-type1.tar.xz calligra.doc.tar.xz calligra.tar.xz calrsfs.doc.tar.xz calrsfs.tar.xz cals.doc.tar.xz cals.tar.xz calxxxx-yyyy.doc.tar.xz calxxxx-yyyy.tar.xz cancel.doc.tar.xz cancel.tar.xz canoniclayout.doc.tar.xz canoniclayout.tar.xz cantarell.doc.tar.xz cantarell.tar.xz capt-of.doc.tar.xz capt-of.tar.xz captcont.doc.tar.xz captcont.tar.xz captdef.doc.tar.xz captdef.tar.xz caption.doc.tar.xz caption.tar.xz carlisle.doc.tar.xz carlisle.tar.xz carolmin-ps.doc.tar.xz carolmin-ps.tar.xz cascadilla.doc.tar.xz cascadilla.tar.xz cases.doc.tar.xz cases.tar.xz casyl.doc.tar.xz casyl.tar.xz catchfilebetweentags.doc.tar.xz catchfilebetweentags.tar.xz catcodes.doc.tar.xz catcodes.tar.xz catechis.doc.tar.xz catechis.tar.xz catoptions.doc.tar.xz catoptions.tar.xz cbcoptic.doc.tar.xz cbcoptic.tar.xz cbfonts.doc.tar.xz cbfonts.tar.xz cc-pl.doc.tar.xz cc-pl.tar.xz ccaption.doc.tar.xz ccaption.tar.xz ccfonts.doc.tar.xz ccfonts.tar.xz ccicons.doc.tar.xz ccicons.tar.xz cclicenses.doc.tar.xz cclicenses.tar.xz cd-cover.doc.tar.xz cd-cover.tar.xz cd.doc.tar.xz cd.tar.xz cdpbundl.doc.tar.xz cdpbundl.tar.xz cell.doc.tar.xz cell.tar.xz cellspace.doc.tar.xz cellspace.tar.xz censor.doc.tar.xz censor.tar.xz cfr-lm.doc.tar.xz cfr-lm.tar.xz changebar.doc.tar.xz changebar.tar.xz changelayout.doc.tar.xz changelayout.tar.xz changepage.doc.tar.xz changepage.tar.xz changes.doc.tar.xz changes.tar.xz chappg.doc.tar.xz chappg.tar.xz chapterfolder.doc.tar.xz chapterfolder.tar.xz charter.doc.tar.xz charter.tar.xz chbibref.doc.tar.xz chbibref.tar.xz checkcites.doc.tar.xz checkcites.tar.xz chem-journal.tar.xz chemarrow.doc.tar.xz chemarrow.tar.xz chembst.doc.tar.xz chembst.tar.xz chemcompounds.doc.tar.xz chemcompounds.tar.xz chemcono.doc.tar.xz chemcono.tar.xz chemexec.doc.tar.xz chemexec.tar.xz chemfig.doc.tar.xz chemfig.tar.xz chemmacros.doc.tar.xz chemmacros.tar.xz chemnum.doc.tar.xz chemnum.tar.xz chemstyle.doc.tar.xz chemstyle.tar.xz cherokee.doc.tar.xz cherokee.tar.xz chess-problem-diagrams.doc.tar.xz chess-problem-diagrams.tar.xz chess.doc.tar.xz chess.tar.xz chessboard.doc.tar.xz chessboard.tar.xz chessfss.doc.tar.xz chessfss.tar.xz chet.doc.tar.xz chet.tar.xz chextras.doc.tar.xz chextras.tar.xz chicago-annote.doc.tar.xz chicago-annote.tar.xz chicago.tar.xz chickenize.doc.tar.xz chickenize.tar.xz chkfloat.doc.tar.xz chkfloat.tar.xz chktex.doc.tar.xz chktex.tar.xz chletter.doc.tar.xz chletter.tar.xz chngcntr.doc.tar.xz chngcntr.tar.xz chronology.doc.tar.xz chronology.tar.xz chronosys.doc.tar.xz chronosys.tar.xz chscite.doc.tar.xz chscite.tar.xz circ.doc.tar.xz circ.tar.xz circuitikz.doc.tar.xz circuitikz.tar.xz cite.doc.tar.xz cite.tar.xz cjhebrew.doc.tar.xz cjhebrew.tar.xz cjk-ko.doc.tar.xz cjk-ko.tar.xz cjk.doc.tar.xz cjk.tar.xz cjkpunct.doc.tar.xz cjkpunct.tar.xz cjkutils.doc.tar.xz cjkutils.tar.xz classics.doc.tar.xz classics.tar.xz classicthesis.doc.tar.xz classicthesis.tar.xz clefval.doc.tar.xz clefval.tar.xz cleveref.doc.tar.xz cleveref.tar.xz clipboard.doc.tar.xz clipboard.tar.xz clock.doc.tar.xz clock.tar.xz clrscode.doc.tar.xz clrscode.tar.xz cm-lgc.doc.tar.xz cm-lgc.tar.xz cm-super.doc.tar.xz cm-super.tar.xz cm-unicode.doc.tar.xz cm-unicode.tar.xz cm.doc.tar.xz cm.tar.xz cmap.doc.tar.xz cmap.tar.xz cmarrows.doc.tar.xz cmarrows.tar.xz cmbright.doc.tar.xz cmbright.tar.xz cmcyr.doc.tar.xz cmcyr.tar.xz cmdstring.doc.tar.xz cmdstring.tar.xz cmdtrack.doc.tar.xz cmdtrack.tar.xz cmextra.tar.xz cmll.doc.tar.xz cmll.tar.xz cmpica.doc.tar.xz cmpica.tar.xz cmpj.doc.tar.xz cmpj.tar.xz cmsd.doc.tar.xz cmsd.tar.xz cmtiup.doc.tar.xz cmtiup.tar.xz cns.doc.tar.xz cns.tar.xz codedoc.doc.tar.xz codedoc.tar.xz codepage.doc.tar.xz codepage.tar.xz codicefiscaleitaliano.doc.tar.xz codicefiscaleitaliano.tar.xz collcell.doc.tar.xz collcell.tar.xz collectbox.doc.tar.xz collectbox.tar.xz collref.doc.tar.xz collref.tar.xz colordoc.doc.tar.xz colordoc.tar.xz colorinfo.doc.tar.xz colorinfo.tar.xz colorsep.tar.xz colortab.doc.tar.xz colortab.tar.xz colortbl.doc.tar.xz colortbl.tar.xz colorwav.doc.tar.xz colorwav.tar.xz colourchange.doc.tar.xz colourchange.tar.xz combelow.doc.tar.xz combelow.tar.xz combine.doc.tar.xz combine.tar.xz combinedgraphics.doc.tar.xz combinedgraphics.tar.xz comfortaa.doc.tar.xz comfortaa.tar.xz comma.doc.tar.xz comma.tar.xz commado.doc.tar.xz commado.tar.xz commath.doc.tar.xz commath.tar.xz comment.doc.tar.xz comment.tar.xz compactbib.tar.xz complexity.doc.tar.xz complexity.tar.xz components-of-TeX.doc.tar.xz components-of-TeX.tar.xz comprehensive.doc.tar.xz comprehensive.tar.xz computational-complexity.doc.tar.xz computational-complexity.tar.xz concepts.doc.tar.xz concepts.tar.xz concmath-fonts.doc.tar.xz concmath-fonts.tar.xz concmath.doc.tar.xz concmath.tar.xz concprog.doc.tar.xz concprog.tar.xz concrete.doc.tar.xz concrete.tar.xz confproc.doc.tar.xz confproc.tar.xz constants.doc.tar.xz constants.tar.xz conteq.doc.tar.xz conteq.tar.xz context-account.doc.tar.xz context-account.tar.xz context-algorithmic.tar.xz context-bnf.doc.tar.xz context-bnf.tar.xz context-chromato.doc.tar.xz context-chromato.tar.xz context-construction-plan.doc.tar.xz context-construction-plan.tar.xz context-cyrillicnumbers.doc.tar.xz context-cyrillicnumbers.tar.xz context-degrade.doc.tar.xz context-degrade.tar.xz context-filter.doc.tar.xz context-filter.tar.xz context-fixme.tar.xz context-french.doc.tar.xz context-french.tar.xz context-fullpage.doc.tar.xz context-fullpage.tar.xz context-games.doc.tar.xz context-games.tar.xz context-gantt.doc.tar.xz context-gantt.tar.xz context-gnuplot.doc.tar.xz context-gnuplot.tar.xz context-letter.doc.tar.xz context-letter.tar.xz context-lettrine.doc.tar.xz context-lettrine.tar.xz context-lilypond.doc.tar.xz context-lilypond.tar.xz context-mathsets.doc.tar.xz context-mathsets.tar.xz context-notes-zh-cn.doc.tar.xz context-notes-zh-cn.tar.xz context-rst.doc.tar.xz context-rst.tar.xz context-ruby.doc.tar.xz context-ruby.tar.xz context-simplefonts.doc.tar.xz context-simplefonts.tar.xz context-simpleslides.doc.tar.xz context-simpleslides.tar.xz context-transliterator.doc.tar.xz context-transliterator.tar.xz context-typearea.doc.tar.xz context-typearea.tar.xz context-typescripts.doc.tar.xz context-typescripts.tar.xz context-vim.doc.tar.xz context-vim.tar.xz context.doc.tar.xz context.tar.xz context_fourier-map.dif contour.doc.tar.xz contour.tar.xz contracard.doc.tar.xz contracard.tar.xz convbkmk.doc.tar.xz convbkmk.tar.xz cooking.doc.tar.xz cooking.tar.xz cookingsymbols.doc.tar.xz cookingsymbols.tar.xz cool.doc.tar.xz cool.tar.xz coollist.doc.tar.xz coollist.tar.xz coolstr.doc.tar.xz coolstr.tar.xz coolthms.doc.tar.xz coolthms.tar.xz cooltooltips.doc.tar.xz cooltooltips.tar.xz coordsys.doc.tar.xz coordsys.tar.xz copyrightbox.doc.tar.xz copyrightbox.tar.xz coseoul.doc.tar.xz coseoul.tar.xz countriesofeurope.doc.tar.xz countriesofeurope.tar.xz counttexruns.doc.tar.xz counttexruns.tar.xz courier-scaled.doc.tar.xz courier-scaled.tar.xz courier.tar.xz courseoutline.doc.tar.xz courseoutline.tar.xz coursepaper.doc.tar.xz coursepaper.tar.xz coverpage.doc.tar.xz coverpage.tar.xz covington.doc.tar.xz covington.tar.xz cprotect.doc.tar.xz cprotect.tar.xz crbox.doc.tar.xz crbox.tar.xz crop.doc.tar.xz crop.tar.xz crossreference.doc.tar.xz crossreference.tar.xz crossword.doc.tar.xz crossword.tar.xz crosswrd.doc.tar.xz crosswrd.tar.xz cryst.doc.tar.xz cryst.tar.xz cs.tar.xz csbulletin.doc.tar.xz csbulletin.tar.xz cslatex.tar.xz csplain.tar.xz csquotes-de.doc.tar.xz csquotes-de.tar.xz csquotes.doc.tar.xz csquotes.tar.xz cstex.doc.tar.xz cstex.tar.xz csvsimple.doc.tar.xz csvsimple.tar.xz csvtools.doc.tar.xz csvtools.tar.xz ctable.doc.tar.xz ctable.tar.xz ctanify.doc.tar.xz ctanify.tar.xz ctanupload.doc.tar.xz ctanupload.tar.xz ctex-faq.doc.tar.xz ctex-faq.tar.xz ctex.doc.tar.xz ctex.tar.xz ctib.doc.tar.xz ctib.tar.xz ctie.doc.tar.xz ctie.tar.xz cuisine.doc.tar.xz cuisine.tar.xz currfile.doc.tar.xz currfile.tar.xz currvita.doc.tar.xz currvita.tar.xz cursolatex.doc.tar.xz cursolatex.tar.xz curve.doc.tar.xz curve.tar.xz curve2e.doc.tar.xz curve2e.tar.xz curves.doc.tar.xz curves.tar.xz custom-bib.doc.tar.xz custom-bib.tar.xz cutwin.doc.tar.xz cutwin.tar.xz cv.doc.tar.xz cv.tar.xz cweb-latex.doc.tar.xz cweb-latex.tar.xz cweb.doc.tar.xz cweb.tar.xz cyklop.doc.tar.xz cyklop.tar.xz cyrillic-bin.doc.tar.xz cyrillic-bin.tar.xz cyrillic.doc.tar.xz cyrillic.tar.xz cyrplain.tar.xz texlive-specs-rpmlintrc texlive-specs.tar.xz New: ---- bbold-type1.doc.tar.xz bbold-type1.tar.xz bbold.doc.tar.xz bbold.tar.xz bbold_bbold11.dif bchart.doc.tar.xz bchart.tar.xz bclogo.doc.tar.xz bclogo.tar.xz beamer-FUBerlin.doc.tar.xz beamer-FUBerlin.tar.xz beamer-tut-pt.doc.tar.xz beamer.doc.tar.xz beamer.tar.xz beamer2thesis.doc.tar.xz beamer2thesis.tar.xz beameraudience.doc.tar.xz beameraudience.tar.xz beamerposter.doc.tar.xz beamerposter.tar.xz beamersubframe.doc.tar.xz beamersubframe.tar.xz beamertheme-upenn-bc.doc.tar.xz beamertheme-upenn-bc.tar.xz beamerthemejltree.tar.xz beamerthemenirma.doc.tar.xz beamerthemenirma.tar.xz beebe.tar.xz begriff.doc.tar.xz begriff.tar.xz belleek.doc.tar.xz belleek.tar.xz bengali.doc.tar.xz bengali.tar.xz bera.doc.tar.xz bera.tar.xz berenisadf.doc.tar.xz berenisadf.tar.xz betababel.doc.tar.xz betababel.tar.xz beton.doc.tar.xz beton.tar.xz bez123.doc.tar.xz bez123.tar.xz bezos.doc.tar.xz bezos.tar.xz bgreek.doc.tar.xz bgreek.tar.xz bgteubner.doc.tar.xz bgteubner.tar.xz bguq.doc.tar.xz bguq.tar.xz bhcexam.doc.tar.xz bhcexam.tar.xz bib-fr.doc.tar.xz bib-fr.tar.xz bibarts.doc.tar.xz bibarts.tar.xz biber.doc.tar.xz bibexport.doc.tar.xz bibexport.tar.xz bibhtml.doc.tar.xz bibhtml.tar.xz biblatex-apa.doc.tar.xz biblatex-apa.tar.xz biblatex-bwl.doc.tar.xz biblatex-bwl.tar.xz biblatex-caspervector.doc.tar.xz biblatex-caspervector.tar.xz biblatex-chem.doc.tar.xz biblatex-chem.tar.xz biblatex-chicago.doc.tar.xz biblatex-chicago.tar.xz biblatex-dw.doc.tar.xz biblatex-dw.tar.xz biblatex-fiwi.doc.tar.xz biblatex-fiwi.tar.xz biblatex-gost.doc.tar.xz biblatex-gost.tar.xz biblatex-historian.doc.tar.xz biblatex-historian.tar.xz biblatex-ieee.doc.tar.xz biblatex-ieee.tar.xz biblatex-juradiss.doc.tar.xz biblatex-juradiss.tar.xz biblatex-luh-ipw.doc.tar.xz biblatex-luh-ipw.tar.xz biblatex-mla.doc.tar.xz biblatex-mla.tar.xz biblatex-musuos.doc.tar.xz biblatex-musuos.tar.xz biblatex-nature.doc.tar.xz biblatex-nature.tar.xz biblatex-nejm.doc.tar.xz biblatex-nejm.tar.xz biblatex-philosophy.doc.tar.xz biblatex-philosophy.tar.xz biblatex-phys.doc.tar.xz biblatex-phys.tar.xz biblatex-publist.doc.tar.xz biblatex-publist.tar.xz biblatex-science.doc.tar.xz biblatex-science.tar.xz biblatex-swiss-legal.doc.tar.xz biblatex-swiss-legal.tar.xz biblatex-trad.doc.tar.xz biblatex-trad.tar.xz biblatex.doc.tar.xz biblatex.tar.xz bibleref-french.doc.tar.xz bibleref-french.tar.xz bibleref-german.doc.tar.xz bibleref-german.tar.xz bibleref-lds.doc.tar.xz bibleref-lds.tar.xz bibleref-mouth.doc.tar.xz bibleref-mouth.tar.xz bibleref-parse.doc.tar.xz bibleref-parse.tar.xz bibleref.doc.tar.xz bibleref.tar.xz biblist.doc.tar.xz biblist.tar.xz bibtex.doc.tar.xz bibtex.tar.xz bibtex8.doc.tar.xz bibtex8.tar.xz bibtexu.doc.tar.xz bibtopic.doc.tar.xz bibtopic.tar.xz bibtopicprefix.doc.tar.xz bibtopicprefix.tar.xz bibunits.doc.tar.xz bibunits.tar.xz bidi.doc.tar.xz bidi.tar.xz bigfoot.doc.tar.xz bigfoot.tar.xz bigints.doc.tar.xz bigints.tar.xz binomexp.doc.tar.xz binomexp.tar.xz biocon.doc.tar.xz biocon.tar.xz bitelist.doc.tar.xz bitelist.tar.xz bizcard.doc.tar.xz bizcard.tar.xz blacklettert1.doc.tar.xz blacklettert1.tar.xz blindtext.doc.tar.xz blindtext.tar.xz blkarray.doc.tar.xz blkarray.tar.xz block.doc.tar.xz block.tar.xz blockdraw_mp.doc.tar.xz blockdraw_mp.tar.xz bloques.doc.tar.xz bloques.tar.xz blowup.doc.tar.xz blowup.tar.xz bodegraph.doc.tar.xz bodegraph.tar.xz bohr.doc.tar.xz bohr.tar.xz boisik.doc.tar.xz boisik.tar.xz boites.doc.tar.xz boites.tar.xz bold-extra.doc.tar.xz bold-extra.tar.xz boldtensors.doc.tar.xz boldtensors.tar.xz bondgraph.doc.tar.xz bondgraph.tar.xz bookest.doc.tar.xz bookest.tar.xz bookhands.doc.tar.xz bookhands.tar.xz booklet.doc.tar.xz booklet.tar.xz bookman.tar.xz booktabs-de.doc.tar.xz booktabs-fr.doc.tar.xz booktabs.doc.tar.xz booktabs.tar.xz boolexpr.doc.tar.xz boolexpr.tar.xz boondox.doc.tar.xz boondox.tar.xz ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ texlive-specs-c.spec ++++++ ++++ 13552 lines (skipped) ++++ between /work/SRC/openSUSE:Factory/texlive-specs-c/texlive-specs-c.spec ++++ and /work/SRC/openSUSE:Factory/.texlive-specs-c.new/texlive-specs-c.spec ++++++ carolmin-ps.doc.tar.xz -> bbold.doc.tar.xz ++++++ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/fonts/carolmin-ps/README new/doc/fonts/carolmin-ps/README --- old/doc/fonts/carolmin-ps/README 2007-11-05 20:37:03.000000000 +0100 +++ new/doc/fonts/carolmin-ps/README 1970-01-01 01:00:00.000000000 +0100 @@ -1,10 +0,0 @@ -The carolmin-ps bundle offers PostScript Type 1 versions of the -Carolingan Minuscules in the 'Bookhands' collection. - -The license of carolmin-ps is LaTeX Project Public License, lppl. - -The fonts are ready to use replacements for the MetaFont version -provided in the 'Bookhands' collection. - -The author of carolmin-ps is Palle Jorgensen. - diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/bbold/INSTALL new/doc/latex/bbold/INSTALL --- old/doc/latex/bbold/INSTALL 1970-01-01 01:00:00.000000000 +0100 +++ new/doc/latex/bbold/INSTALL 2006-01-09 01:44:40.000000000 +0100 @@ -0,0 +1,40 @@ +THE BBOLD SYMBOL FONT + +6 APRIL 1994 + +This distribution contains the bbold symbol font: + + INSTALL bbgreeku.mf bbold.dtx bbold17.mf bbold8.mf + README bbligs.mf bbold.mf bbold5.mf bbold9.mf + bbbase.mf bblower.mf bbold10.mf bbold6.mf bbparams.mf + bbgreekl.mf bbnum.mf bbold12.mf bbold7.mf bbpunc.mf + bbupper.mf + +To install the fonts, you should: + + * run METAFONT on the fonts, for example under Unix you say: + + mf "\mode=localfont; input bbold5;" + mf "\mode=localfont; input bbold6;" + mf "\mode=localfont; input bbold7;" + mf "\mode=localfont; input bbold8;" + mf "\mode=localfont; input bbold9;" + mf "\mode=localfont; input bbold12;" + mf "\mode=localfont; input bbold17;" + + * move bbold*.tfm into a TeX font metrics directory + + * move bbold*.*pk into a TeX bitmaps directory + +If you want to use the bbold font in LaTeX2e, you should: + + * run LaTeX2e on bbold.dtx + + * move bbold.sty and Ubbold.fd into a TeX inputs directory + + * read the documentation in bbold.dvi + +This file should only be distributed as part of the bbold +distribution. + +Copyright 1994 Alan Jeffrey diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/bbold/README new/doc/latex/bbold/README --- old/doc/latex/bbold/README 1970-01-01 01:00:00.000000000 +0100 +++ new/doc/latex/bbold/README 2006-01-09 01:44:40.000000000 +0100 @@ -0,0 +1,12 @@ +THE BBOLD SYMBOL FONT + +6 APRIL 1994 + +This directory contains the bbold symbol font. This is a geometric +sans serif blackboard bold font, for use in mathematics. + +Read the INSTALL file for details of how to install the bbold +package. + +Alan Jeffrey (alanje@cogs.susx.ac.uk) + Files old/doc/latex/bbold/bbold.pdf and new/doc/latex/bbold/bbold.pdf differ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/tlpkg/tlpobj/bbold.doc.tlpobj new/tlpkg/tlpobj/bbold.doc.tlpobj --- old/tlpkg/tlpobj/bbold.doc.tlpobj 1970-01-01 01:00:00.000000000 +0100 +++ new/tlpkg/tlpobj/bbold.doc.tlpobj 2010-06-10 18:16:55.000000000 +0200 @@ -0,0 +1,9 @@ +name bbold.doc +category Package +revision 17187 +shortdesc doc files of bbold +relocated 1 +docfiles size=41 + RELOC/doc/latex/bbold/INSTALL + RELOC/doc/latex/bbold/README + RELOC/doc/latex/bbold/bbold.pdf diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/tlpkg/tlpobj/carolmin-ps.doc.tlpobj new/tlpkg/tlpobj/carolmin-ps.doc.tlpobj --- old/tlpkg/tlpobj/carolmin-ps.doc.tlpobj 2010-06-10 18:20:55.000000000 +0200 +++ new/tlpkg/tlpobj/carolmin-ps.doc.tlpobj 1970-01-01 01:00:00.000000000 +0100 @@ -1,7 +0,0 @@ -name carolmin-ps.doc -category Package -revision 15878 -shortdesc doc files of carolmin-ps -relocated 1 -docfiles size=1 - RELOC/doc/fonts/carolmin-ps/README ++++++ carolmin-ps.doc.tar.xz -> bbold.tar.xz ++++++ ++++ 4532 lines of diff (skipped) ++++++ bbold_bbold11.dif ++++++ --- texmf-dist/fonts/source/public/bbold/bbold11.mf +++ texmf-dist/fonts/source/public/bbold/bbold11.mf 2010-01-14 08:18:19.579429546 +0000 @@ -0,0 +1,19 @@ +% Blackboard bold 11pt. + +mode_setup; + +input bbbase; + +% Hacks to make sure cmr doesn't generate the font, and doesn't load cmbase. +cmbase := 1; +def generate suffix t = enddef; + +% Input the cmr parameters. +input cmr11; + +font_identifier := "BBOLD"; +font_coding_scheme := "Blackboard bold"; + +% Then generate blackboard bold. +input bbold; +bye; ++++++ cm-super.doc.tar.xz -> beamer.doc.tar.xz ++++++ ++++ 19236 lines of diff (skipped) ++++++ cm-super.tar.xz -> beamer.tar.xz ++++++ /work/SRC/openSUSE:Factory/texlive-specs-c/cm-super.tar.xz /work/SRC/openSUSE:Factory/.texlive-specs-c.new/beamer.tar.xz differ: char 25, line 1 ++++++ c-pascal.doc.tar.xz -> beebe.tar.xz ++++++ ++++ 149506 lines of diff (skipped) ++++++ calculator.doc.tar.xz -> bera.doc.tar.xz ++++++ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/fonts/bera/LICENSE new/doc/fonts/bera/LICENSE --- old/doc/fonts/bera/LICENSE 1970-01-01 01:00:00.000000000 +0100 +++ new/doc/fonts/bera/LICENSE 2006-01-09 01:47:01.000000000 +0100 @@ -0,0 +1,56 @@ +The fonts are distributed under the following copyright: + +Copyright + +Copyright (c) 2003 by Bitstream, Inc. All Rights Reserved. +Bitstream Vera is a trademark of Bitstream, Inc. + +Permission is hereby granted, free of charge, to any person +obtaining a copy of the fonts accompanying this license +(ÿFontsÿ) and associated documentation files (the ÿFont +Softwareÿ), to reproduce and distribute the Font Software, +including without limitation the rights to use, copy, merge, +publish, distribute, and/or sell copies of the Font +Software, and to permit persons to whom the Font Software is +furnished to do so, subject to the following conditions: + +The above copyright and trademark notices and this +permission notice shall be included in all copies of one or +more of the Font Software typefaces. + +The Font Software may be modified, altered, or added to, and +in particular the designs of glyphs or characters in the +Fonts may be modified and additional glyphs or characters +may be added to the Fonts, only if the fonts are renamed to +names not containing either the words ÿBitstreamÿ or the +word ÿVeraÿ. + +This License becomes null and void to the extent applicable +to Fonts or Font Software that has been modified and is +distributed under the ÿBitstream Veraÿ names. + +The Font Software may be sold as part of a larger software +package but no copy of one or more of the Font Software +typefaces may be sold by itself. + +THE FONT SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF +ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO +ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR +PURPOSE AND NONINFRINGEMENT OF COPYRIGHT, PATENT, TRADEMARK, +OR OTHER RIGHT. IN NO EVENT SHALL BITSTREAM OR THE GNOME +FOUNDATION BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, INCLUDING ANY GENERAL, SPECIAL, INDIRECT, +INCIDENTAL, OR CONSEQUENTIAL DAMAGES, WHETHER IN AN ACTION +OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF THE USE +OR INABILITY TO USE THE FONT SOFTWARE OR FROM OTHER DEALINGS +IN THE FONT SOFTWARE. + +Except as contained in this notice, the names of Gnome, the +Gnome Foundation, and Bitstream Inc., shall not be used in +advertising or otherwise to promote the sale, use or other +dealings in this Font Software without prior written +authorization from the Gnome Foundation or Bitstream Inc., +respectively. For further information, contact: fonts at +gnome dot org. + +%% finis diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/fonts/bera/README new/doc/fonts/bera/README --- old/doc/fonts/bera/README 1970-01-01 01:00:00.000000000 +0100 +++ new/doc/fonts/bera/README 2006-01-09 01:47:01.000000000 +0100 @@ -0,0 +1,189 @@ +=========================================================== + "Bera" font pack for LaTeX + as of 2004-09-30 +============================================================ + Malte Rosenau + Walter Schmidt + + +This collection comprises the "Bera" Type1 fonts and the +files required to use them with LaTeX on the Un*x or PC +platform. + +"Bera" is a set of three PostScript Type1 font families: +Bera Serif (a slab-serif Roman), Bera Sans (a Frutiger +descendant), and Bera Mono (monospaced/typewriter). The +fonts were originally designed by Bitstream, Inc in TrueType +format under the name "Bitstream Vera". These fonts are +available from <http://ftp.gnome.org/pub/GNOME/sources/ +ttf-bitstream-vera/1.10/>. + +Malte Rosenau converted the Vera fonts to the Postscript +type1 format; the license required a different name ("Bera") +to be assigend to the result. Ulrich Dirr (Art & Satz) +reworked the kerning tables of the Bera Sans fonts. + +The file bera.pdf shows samples of the Bera fonts and lists +all available families, series and shapes. + +The below installation instructions assume a TDS-compliant +TeX system, such as teTeX, MikTeX or VTeX/Free. Yet they +may not exactly fit your particular TeX system; please, +consult its documentation, too! The directory name "texmf" +refers to the root directory of a TDS directory tree. In +case your TeX systems has more than one TDS tree, its +documentation should tell you where to install new files. + + + +History +------- +2004-09-30 + bugs in the kerning tables of BeraSans fixed + +2004-09-07 + substantially improved kerning data for Bera Sans + (special thanks to Ulrich Dirr!); + minor fixes to the kerning data of Bera Serif; + miinor changes to the substititions in the fd files; + minor changes to the documentation; + font sample; + +2004-01-31 + preliminary release + + + +Installing the Type1 font files +------------------------------- +The Type1 font files + + fveb8a.pfb + fver8a.pfb + fvmb8a.pfb + fvmbo8a.pfb + fvmr8a.pfb + fvmro8a.pfb + fvsb8a.pfb + fvsbo8a.pfb + fvsr8a.pfb + fvsro8a.pfb + +are to be copied to the directory + + texmf/fonts/type1/public/bera + +of your TeX system, and the related .afm files should go +into + + texmf/fonts/afm/public/bera + +Most likely, you will have to create these directories +first. + + + +Installing the TeX support files from the archive bera.zip +---------------------------------------------------------- +Unpack the ZIP archive bera.zip in the directory "texmf" of +your TeX system; thus, all files will be copied to the +appropriate directories. + + + +Updating the filename database +------------------------------ +Many TeX systems require manual updating of a "filename +database" after adding of new files. Please, consult the +documentation of your TeX system! + + + +Configuring your TeX system +--------------------------- +The required actions depend on the particular TeX system. +Particular sets of instructions are provided below for + + * teTeX 2.0 and later, + * VTeX/Free 8.x and later. + +In case you have a different TeX system, consult its +documentation how to make it use the additional font map +file named "bera.map". Two copies of this file reside in +the directories texmf/dvips/config/ and +texmf/fonts/map/dvips. + +Configuring teTeX: +Use the shell script "updmap" to add the font map file named +"bera.map" to the configuration. See the documentation of +your particular teTeX version how to use the script. With +teTeX 2.0 and above, execute the following commands: + + texhash + updmap --enable Map bera.map + + +Configuring VTeX/Free: +Make VTeX read the additional font map ("aliasing") file +bera.ali. This is usually accomplished by putting a record +for this file into each of the configuration files + + texmf/vtex/config/pdf.fm +and + texmf/vtex/config/ps.fm + +"bera.ali" is to be added to the TYPE1 section of the +above-mentioned files: + + TYPE1 { + ... + bera.ali + } + + + +Using the Bera fonts with LaTeX +------------------------------- +See the file bera.txt, which resides in the directory +texmf/doc/fonts/bera. + + + +Bugs and problems +----------------- +With older versions of the dvips program, font subsetting +may fail with the Bera fonts. In this case, disable +subsetting through the dvips option "-j0", or change the +font map file bera.map accordingly. + +The Type1 fonts exhibit a font-specific encoding, rather +than the usual "Adobe Standard". While this is irrelevant +for TeX, it may lead to problems with applications from the +non-TeX world. In case you encounter any such problem, +please report to +Malte Rosenau <malte.rosenau@theol.uni-goettingen.de>. + +Any bugs regarding the TeX metrics (including the kerning +data), fd files and macros should be reported to +WalterSchmidt <w.a.schmidt@gmx.net>. + + +Legal notice +------------ +The license terms for the Bera fonts are included in +the file LICENSE. + +The contents of the archive file bera.zip are + + Copyright (c) 2004 Walter Schmidt + +The files may be distributed (either as a ZIP archive or +unpacked) and/or modified under the conditions of the LaTeX +Project Public License, either version 1.2 of this license +or (at your option) any later version. The latest version +of this license is in http://www.latex-project.org/lppl.txt +and version 1.2 or later is part of all distributions of +LaTeX version 1999/12/01 or later. + + +== finis Files old/doc/fonts/bera/bera.pdf and new/doc/fonts/bera/bera.pdf differ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/fonts/bera/bera.txt new/doc/fonts/bera/bera.txt --- old/doc/fonts/bera/bera.txt 1970-01-01 01:00:00.000000000 +0100 +++ new/doc/fonts/bera/bera.txt 2006-01-09 01:47:01.000000000 +0100 @@ -0,0 +1,117 @@ +============================================================ + Using the Bera fonts with LaTeX +============================================================ + 2004-09-07 + Walter Schmidt + w.a.schmidt@gmx.net + +"Bera" is a set of three PostScript Type1 font families: +Bera Serif (a slab-serif Roman), Bera Sans (a "Frutiger +descendant") and Bera Mono (monospaced/typewriter). + + +USING SINGLE FONT FAMILIES + +Several macro packages are provided to use these font +families with LaTeX: + +package: effect: +------------------------------------------------------------ +beraserif selects Bera Serif as the default roman family +berasans selects Bera Sans as the default sansserif family +beramono selects Bera Mono as the default typewriter family + +You need not necessarily use all three font families +together (even though this is supported, see below). +Bera Sans blends well with many roman typefaces, as long as +their x-height is not too low. Bera Mono is a versatile +"all-purpose" monospaced typeface, whose advantage over +CM-Typewriter is the availability of a bold font series. + +Notice that the Bera fonts are supported with T1 (european) +and TS1 (textcompanion) encoding only, so you should issue +the commands + + \usepackage[T1]{fontenc} + \usepackage{textcomp} + +in the document preamble. The obsolete OT1 encoding, which +is still the default with LaTeX, is _not_ supported. + +The Bera fonts are much larger than many others, when used +at the same nominal size. This can be fixed by loading the +above package so with the option [scaled=...]. For +instance, + + \usepackage[scaled=0.95]{berasans} + +loads the Bera Sans fonts, scaled down to 95% of their +"natural" size. Omitting the factor, i.e., + + \usepackage[scaled]{...} + +selects a default scaling of 90%, which makes the Bera fonts +approximately match the size of the Computer Modern fonts. + + +USING THE BERA FONT FAMILIES TOGETHER + +To make the use of the three Bera fonts families together +most easy, a further macro package bera.sty is provided: + + \usepackage{bera} + +effects all of the following: + +* T1 and textcompanion encoding is selected + +* Bera Roman, Sans and Mono at 90% are loaded as the three + main text font families (while the math fonts remain + unchanged!) + +* the line spacing is enlarged by 5%, i.e., + \linespread{1.05}, with respect to the large x-height of + the Bera typefaces; + +* the definitions of the TeX and LaTeX logos \TeX and \LaTeX + are changed so as to suit BeraSerif. + +Even though there are no math fonts that were designed +particularly to go with Bera Serif, math typesetting is +possible. It is recommended to use the the math fonts of +Y&Y's Lucida font set <http://www.yandy.com/lucida.htm>, +which blend surprisingly well with Bera. Notice that the +Lucida math fonts are to be scaled correspondingly: + + \usepackage{bera} + \usepackage[expert]{lucbmath} + \def\DeclareLucidaFontShape#1#2#3#4#5#6{% + \DeclareFontShape{#1}{#2}{#3}{#4}{<->s*[0.90]#5}{#6}} + + + + +NFSS CLASSIFICATION + +encodings family series shape(s) Postscript font name +--------------------------------------------------------- +T1, TS1 fve m n, sl(*) BeraSerif-Roman +T1, TS1 fve b n, sl(*) BeraSerif-Bold +T1, TS1 fvs m n, sl BeraSans-Roman + BeraSans-Oblique +T1, TS1 fvs b n, sl BeraSans-Bold + BeraSans-BoldOblique +T1, TS1 fvm m n, sl BeraSansMono-Roman + BeraSansMono-Oblique +T1, TS1 fvm b n, sl BeraSansMono-Bold + BeraSansMono-BoldOb + +(*) The slanted series of the Bera Serif fonts are +artificially slanted; there are no correspoding real fonts. + +In the TS1 encoding only the characters of the ISO-Adobe +character set plus the Euro (\texteuro) and the Omega +(\textomega) are available. + + +== finis diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/calculator/README new/doc/latex/calculator/README --- old/doc/latex/calculator/README 2012-07-23 19:28:43.000000000 +0200 +++ new/doc/latex/calculator/README 1970-01-01 01:00:00.000000000 +0100 @@ -1,133 +0,0 @@ - -The calculator and calculus packages: Use \LaTeX as a scientific calculator. - -Robert Fuster, 2012 - - -1. Licence ----------- -This material is subject to the LaTeX Project Public License. - -See http://www.ctan.org/tex-archive/help/Catalogue/licenses.lppl.html -for the details of that license. - - -2. About the packages ---------------------- - -The calculator and calculus packages define several instructions which allow us -to realize algebraic operations and to evaluate elementary functions and derivatives -in our documents. - -My main goal is to define the arithmetic and functional claculations I need in my -package "xpicture" (http://www.upv.es/~rfuster/xpicture), but the numeric abilities -of "calculator" and "calculus" may be useful in other contexts. - -2.1 The calculator package --------------------------- - -The operations implemented by the calculator package include -- arithmetical calculations with real and integer numbers -- two and three dimensional vectors and matrices arithmetics -- computation of powers, square roots, trigonometrical, exponential, logarithmic and - hyperbolic functions. - -In addition, some important numbers, such as pi, sqrt(2) or e, are predefined. - -Some simple examples: - -a) Simplify a fraction: if you type - - \FRACTIONSIMPLIFY{252}{2220}{\num}{\den} - - Then, $\num/\den$ equals to 21/186 - -b) Compute elementary functions: - - \LOG{2}{\sol} ---> \sol equals 0.69315 - - \LOG[10]{2}{\sol} ---> \sol equals 0.30103 - - \SIN{\numberHALFPI}{\sol} ---> \sol equals 1 - -c) More complex calculations: - You can compute the value of sqrt(7.25)cos(pi/7) by typing - - \SQRT{7.25}{\tempa} - \DIVIDE{\numberPI}{7}{\tempb} - \COS{\tempb}{\tempc} - \MULTIPLY{\tempa}{\tempa}{\sol} - - Then, the value 2.42589 is stored in \sol. - -d) Vectors and matrices: - - \SCALARPRODUCT(1,2)(2,1){\sol} ---> \sol equals 4 - - \MATRIXPRODUCT(1,1;-1,2)(0,-1;1,1)(\sola,\solb;\solc,\sold) - ---> \sola, \solb, \solc, \sold equals 1, 0, 2, 3. - - -2.2. The calculus package -------------------------- - -This package adds to the calculator package several utilities to use and define -real functions and their derivatives, including elementary functions, -operations with functions, vector-valuated functions polar coordinates. -When you call a "function", this function ant its derivative are evaluated simultaneously. - -Examples: - -a) Predefined functions: - - \SINfunction{\numberPI}{\sol}{\Dsol} ---> - \sol equals to 0 (=sin(pi)), and \Dsol equals -1 (=cos(pi)), - because cos(t) is the derivative of sin(t). - -b) Defining new functions: You can define the function f(t)=exp(2t)cos(t)-t -with the following code: - - \SCALEVARIABLEfunction{2}{\EXPfunction}{\functionA} % A=e^(2t) - \MULTIPLY{\functionA}{\COSfunction}{\functionB} % b=e^(2t)cos(t) - \SUBTRACTfunction{\functionB}{\IDENTITYfunction}{\functionF} % My function - -Then, \functionF{num}{\sol}{\Dsol} stores f(num) and f'(num) in \sol and \Dsol. - - -3. Installation and documentation ---------------------------------- - -By compiling the source file "calculator.dtx" in the following sequence - ->> pdflatex calculator.dtx ->> makeindex -s gind.ist -o calculator.ind calculator.idx ->> makeindex -s gglo.ist -o calculator.gls calculator.glo ->> pdflatex calculator.dtx - -several files will be generated: - - "calculator.sty" and "calculus.sty" (the packages). - Move these two files where LaTeX search for (typically, in a local texmf tree, - at tex/latex/calculator) and refresh the file database. - - "calculator.pdf" (the user manual) - -In addition, many small files, named "calculatorNN.tex" are generated. -These files contain the source code of all examples included in the manual. -You can store or discard this files. - ---------------------------------------------------- -Robert Fuster -rfuster@mat.upv.es - -Universitat Polit\`ecnica de Val\`encia, 2012/05/19 ---------------------------------------------------- - - - - - - - - - Files old/doc/latex/calculator/calculator.pdf and new/doc/latex/calculator/calculator.pdf differ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/calculator/calculator1.tex new/doc/latex/calculator/calculator1.tex --- old/doc/latex/calculator/calculator1.tex 2012-07-23 19:28:43.000000000 +0200 +++ new/doc/latex/calculator/calculator1.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,16 +0,0 @@ -% \tempA=2,5^2 - \SQUARE{2.5}{\tempA} -% \tempB=sqrt(12) - \SQUAREROOT{12}{\tempB} -% \tempC=exp(3,4) - \EXP{3.4}{\tempC} -% \divisio=\tempA/tempB - \DIVIDE{\tempA}{\tempB}{\divisio} -% \sol=\divisio+\tempC - \ADD{\divisio}{\tempC}{\sol} -\begin{align*} -\frac{2.5^2}{\sqrt{12}}+\mathrm{e}^{3.4} - &= \frac{\tempA}{\tempB}+\tempC \\ - &= \divisio+\tempC \\ - &=\sol -\end{align*} diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/calculator/calculator10.tex new/doc/latex/calculator/calculator10.tex --- old/doc/latex/calculator/calculator10.tex 2012-07-23 19:28:43.000000000 +0200 +++ new/doc/latex/calculator/calculator10.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,2 +0,0 @@ -\LENGTHDIVIDE{1in}{1cm}{\sol} -One inch equals $\sol$ centimeters. diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/calculator/calculator11.tex new/doc/latex/calculator/calculator11.tex --- old/doc/latex/calculator/calculator11.tex 2012-07-23 19:28:43.000000000 +0200 +++ new/doc/latex/calculator/calculator11.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,2 +0,0 @@ -\SQUARE{-1.256}{\sol} -$(-1.256)^2=\sol$ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/calculator/calculator12.tex new/doc/latex/calculator/calculator12.tex --- old/doc/latex/calculator/calculator12.tex 2012-07-23 19:28:43.000000000 +0200 +++ new/doc/latex/calculator/calculator12.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,2 +0,0 @@ -\CUBE{-1.256}{\sol} -$(-1.256)^3=\sol$ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/calculator/calculator13.tex new/doc/latex/calculator/calculator13.tex --- old/doc/latex/calculator/calculator13.tex 2012-07-23 19:28:43.000000000 +0200 +++ new/doc/latex/calculator/calculator13.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,12 +0,0 @@ -\POWER{-1.256}{-5}{\sola} -\POWER{-1.256}{5}{\solb} -\POWER{-1.256}{0}{\solc} -\[ -\begin{aligned} -(-1.256)^{-5}&=\sola -\\ -(-1.256)^{5}&=\solb -\\ -(-1.256)^{0}&=\solc -\end{aligned} -\] diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/calculator/calculator14.tex new/doc/latex/calculator/calculator14.tex --- old/doc/latex/calculator/calculator14.tex 2012-07-23 19:28:43.000000000 +0200 +++ new/doc/latex/calculator/calculator14.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,2 +0,0 @@ -\ABSVALUE{-1.256}{\sol} -$\left\vert-1.256\right\vert=\sol$ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/calculator/calculator15.tex new/doc/latex/calculator/calculator15.tex --- old/doc/latex/calculator/calculator15.tex 2012-07-23 19:28:43.000000000 +0200 +++ new/doc/latex/calculator/calculator15.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,4 +0,0 @@ -\INTEGERPART{1.256}{\sola} -\INTEGERPART{-1.256}{\solb} -The integer part of $1.256$ is $\sola$, -but the integer part of $-1.256$ is $\solb$. diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/calculator/calculator16.tex new/doc/latex/calculator/calculator16.tex --- old/doc/latex/calculator/calculator16.tex 2012-07-23 19:28:43.000000000 +0200 +++ new/doc/latex/calculator/calculator16.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,2 +0,0 @@ -\FLOOR{1.256}{\sol} -The integer part of $1.256$ is $\sol$. diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/calculator/calculator17.tex new/doc/latex/calculator/calculator17.tex --- old/doc/latex/calculator/calculator17.tex 2012-07-23 19:28:43.000000000 +0200 +++ new/doc/latex/calculator/calculator17.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,5 +0,0 @@ -\FRACTIONALPART{1.256}{\sol} -\sol - -\FRACTIONALPART{-1.256}{\sol} -\sol diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/calculator/calculator18.tex new/doc/latex/calculator/calculator18.tex --- old/doc/latex/calculator/calculator18.tex 2012-07-23 19:28:43.000000000 +0200 +++ new/doc/latex/calculator/calculator18.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,8 +0,0 @@ -\TRUNCATE[0]{1.25688}{\sol} -\sol - -\TRUNCATE[2]{1.25688}{\sol} -\sol - -\TRUNCATE[4]{1.25688}{\sol} -\sol diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/calculator/calculator19.tex new/doc/latex/calculator/calculator19.tex --- old/doc/latex/calculator/calculator19.tex 2012-07-23 19:28:43.000000000 +0200 +++ new/doc/latex/calculator/calculator19.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,8 +0,0 @@ -\ROUND[0]{1.25688}{\sol} -\sol - -\ROUND[2]{1.25688}{\sol} -\sol - -\ROUND[4]{1.25688}{\sol} -\sol diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/calculator/calculator2.tex new/doc/latex/calculator/calculator2.tex --- old/doc/latex/calculator/calculator2.tex 2012-07-23 19:28:43.000000000 +0200 +++ new/doc/latex/calculator/calculator2.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,14 +0,0 @@ -\SQUARE{5}\sol -The \texttt{\textbackslash sol} -command contains the square of $5$: -\[5^2=\sol\] -\begin{center} -\SQUAREROOT{5}\sol -Now, the \texttt{\textbackslash sol} -command is the square root of $5$: -\[\sqrt{5}=\sol\] -\end{center} -On having gone out of the \texttt{center} -environment, -the command recovers its previous value: -\sol diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/calculator/calculator20.tex new/doc/latex/calculator/calculator20.tex --- old/doc/latex/calculator/calculator20.tex 2012-07-23 19:28:43.000000000 +0200 +++ new/doc/latex/calculator/calculator20.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,14 +0,0 @@ -\INTEGERDIVISION{435}{27}{\sola}{\solb} -$435=27\times\sola+\solb$ - -\INTEGERDIVISION{27}{435}{\sola}{\solb} -$27=435\times\sola+\solb$ - -\INTEGERDIVISION{-435}{27}{\sola}{\solb} -$-435=27\times(\sola)+\solb$ - -\INTEGERDIVISION{435}{-27}{\sola}{\solb} -$435=-27\times(\sola)+\solb$ - -\INTEGERDIVISION{-435}{-27}{\sola}{\solb} -$-435=-27\times\sola+\solb$ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/calculator/calculator21.tex new/doc/latex/calculator/calculator21.tex --- old/doc/latex/calculator/calculator21.tex 2012-07-23 19:28:43.000000000 +0200 +++ new/doc/latex/calculator/calculator21.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,8 +0,0 @@ -\INTEGERQUOTIENT{435}{27}{\sol} -\sol - -\INTEGERQUOTIENT{27}{435}{\sol} -\sol - -\INTEGERQUOTIENT{-43.5}{2.7}{\sol} -\sol diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/calculator/calculator22.tex new/doc/latex/calculator/calculator22.tex --- old/doc/latex/calculator/calculator22.tex 2012-07-23 19:28:43.000000000 +0200 +++ new/doc/latex/calculator/calculator22.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,8 +0,0 @@ -\MODULO{435}{27}{\sol} -\[ -435 \equiv \sol \pmod{27} -\] -\MODULO{-435}{27}{\sol} -\[ --435 \equiv \sol \pmod{27} -\] diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/calculator/calculator23.tex new/doc/latex/calculator/calculator23.tex --- old/doc/latex/calculator/calculator23.tex 2012-07-23 19:28:43.000000000 +0200 +++ new/doc/latex/calculator/calculator23.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,2 +0,0 @@ -\GCD{435}{27}{\sol} -$\gcd(435,27)=\sol$ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/calculator/calculator24.tex new/doc/latex/calculator/calculator24.tex --- old/doc/latex/calculator/calculator24.tex 2012-07-23 19:28:43.000000000 +0200 +++ new/doc/latex/calculator/calculator24.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,3 +0,0 @@ -\newcommand{\lcm}{\operatorname{lcm}} -\LCM{435}{27}{\sol} -$\lcm(435,27)=\sol$ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/calculator/calculator25.tex new/doc/latex/calculator/calculator25.tex --- old/doc/latex/calculator/calculator25.tex 2012-07-23 19:28:43.000000000 +0200 +++ new/doc/latex/calculator/calculator25.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,2 +0,0 @@ -\FRACTIONSIMPLIFY{435}{27}{\sola}{\solb} -$435/27=\sola/\solb$ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/calculator/calculator26.tex new/doc/latex/calculator/calculator26.tex --- old/doc/latex/calculator/calculator26.tex 2012-07-23 19:28:43.000000000 +0200 +++ new/doc/latex/calculator/calculator26.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,2 +0,0 @@ -\SQUAREROOT{1.44}{\sol} -$\sqrt{1.44}=\sol$ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/calculator/calculator27.tex new/doc/latex/calculator/calculator27.tex --- old/doc/latex/calculator/calculator27.tex 2012-07-23 19:28:43.000000000 +0200 +++ new/doc/latex/calculator/calculator27.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,2 +0,0 @@ -\EXP{0.5}{\sol} -$\exp(0.5)=\sol$ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/calculator/calculator28.tex new/doc/latex/calculator/calculator28.tex --- old/doc/latex/calculator/calculator28.tex 2012-07-23 19:28:43.000000000 +0200 +++ new/doc/latex/calculator/calculator28.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,6 +0,0 @@ -\EXP[10]{1.3}{\sol} -$10^{1.3}=\sol$ - -\EXP[2]{0.33333}{\sol} -$2^{1/3}=\sol$ - diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/calculator/calculator29.tex new/doc/latex/calculator/calculator29.tex --- old/doc/latex/calculator/calculator29.tex 2012-07-23 19:28:43.000000000 +0200 +++ new/doc/latex/calculator/calculator29.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,2 +0,0 @@ -\LOG{0.5}{\sol} -$\log 0.5=\sol$ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/calculator/calculator3.tex new/doc/latex/calculator/calculator3.tex --- old/doc/latex/calculator/calculator3.tex 2012-07-23 19:28:43.000000000 +0200 +++ new/doc/latex/calculator/calculator3.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,2 +0,0 @@ -\COPY{-1.256}{\sol} -\sol diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/calculator/calculator30.tex new/doc/latex/calculator/calculator30.tex --- old/doc/latex/calculator/calculator30.tex 2012-07-23 19:28:43.000000000 +0200 +++ new/doc/latex/calculator/calculator30.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,2 +0,0 @@ -\LOG[10]{0.5}{\sol} -$\log_{10} 0.5=\sol$ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/calculator/calculator31.tex new/doc/latex/calculator/calculator31.tex --- old/doc/latex/calculator/calculator31.tex 2012-07-23 19:28:43.000000000 +0200 +++ new/doc/latex/calculator/calculator31.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,11 +0,0 @@ -\SIN{\numberTHIRDPI}{\sol} -$\sin \pi/3=\sol$ - -\COS{\numberTHIRDPI}{\sol} -$\cos \pi/3=\sol$ - -\TAN{\numberTHIRDPI}{\sol} -$\tan \pi/3=\sol$ - -\COT{\numberTHIRDPI}{\sol} -$\cot \pi/3=\sol$ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/calculator/calculator32.tex new/doc/latex/calculator/calculator32.tex --- old/doc/latex/calculator/calculator32.tex 2012-07-23 19:28:43.000000000 +0200 +++ new/doc/latex/calculator/calculator32.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,11 +0,0 @@ -\DEGREESSIN{60}{\sol} -$\sin 60^{\textrm o}=\sol$ - -\DEGREESCOS{60}{\sol} -$\cos 60^{\textrm o}=\sol$ - -\DEGREESTAN{60}{\sol} -$\tan 60^{\textrm o}=\sol$ - -\DEGREESCOT{60}{\sol} -$\cot 60^{\textrm o}=\sol$ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/calculator/calculator33.tex new/doc/latex/calculator/calculator33.tex --- old/doc/latex/calculator/calculator33.tex 2012-07-23 19:28:43.000000000 +0200 +++ new/doc/latex/calculator/calculator33.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,11 +0,0 @@ -\DEGREESCOS[400]{50}{\sol} -\sol - -\DEGREESCOS{45}{\sol} -\sol - -\COS{\numberQUARTERPI}{\sol} -\sol - -\DEGREESCOS[8]{1}{\sol} -\sol diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/calculator/calculator34.tex new/doc/latex/calculator/calculator34.tex --- old/doc/latex/calculator/calculator34.tex 2012-07-23 19:28:43.000000000 +0200 +++ new/doc/latex/calculator/calculator34.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,2 +0,0 @@ -\DEGtoRAD{60}{\sol} -\sol diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/calculator/calculator35.tex new/doc/latex/calculator/calculator35.tex --- old/doc/latex/calculator/calculator35.tex 2012-07-23 19:28:43.000000000 +0200 +++ new/doc/latex/calculator/calculator35.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,7 +0,0 @@ -\MULTIPLY{\numberTWOPI}{10}{\TWENTYPI} -\ADD{\numberPI}{\TWENTYPI}{\TWENTYONEPI} -\REDUCERADIANSANGLE{\TWENTYONEPI}{\sol} -\sol - -\REDUCEDEGREESANGLE{3690}{\sol} -\sol diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/calculator/calculator36.tex new/doc/latex/calculator/calculator36.tex --- old/doc/latex/calculator/calculator36.tex 2012-07-23 19:28:43.000000000 +0200 +++ new/doc/latex/calculator/calculator36.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,11 +0,0 @@ -\SINH{1.256}{\sol} -\sol - -\COSH{1.256}{\sol} -\sol - -\TANH{1.256}{\sol} -\sol - -\COTH{1.256}{\sol} -\sol diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/calculator/calculator37.tex new/doc/latex/calculator/calculator37.tex --- old/doc/latex/calculator/calculator37.tex 2012-07-23 19:28:43.000000000 +0200 +++ new/doc/latex/calculator/calculator37.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,5 +0,0 @@ -\VECTORCOPY(1,-1)(\sola,\solb) -$(\sola,\solb)$ - -\VECTORCOPY(1,-1,2)(\sola,\solb,\solc) -$(\sola,\solb,\solc)$ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/calculator/calculator38.tex new/doc/latex/calculator/calculator38.tex --- old/doc/latex/calculator/calculator38.tex 2012-07-23 19:28:43.000000000 +0200 +++ new/doc/latex/calculator/calculator38.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,5 +0,0 @@ -\VECTORADD(1,-1,2)(3,5,-1)(\sola,\solb,\solc) -$(1,-1,2)+(3,5,-1)=(\sola,\solb,\solc)$ - -\VECTORSUB(1,-1,2)(3,5,-1)(\sola,\solb,\solc) -$(1,-1,2)-(3,5,-1)=(\sola,\solb,\solc)$ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/calculator/calculator39.tex new/doc/latex/calculator/calculator39.tex --- old/doc/latex/calculator/calculator39.tex 2012-07-23 19:28:43.000000000 +0200 +++ new/doc/latex/calculator/calculator39.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,6 +0,0 @@ -\SCALARVECTORPRODUCT{2}(3,5)(\sola,\solb) -$2(3,5)=(\sola,\solb)$ - -\SCALARVECTORPRODUCT{2}(3,5,-1)(% - \sola,\solb,\solc) -$2(3,5,-1)=(\sola,\solb,\solc)$ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/calculator/calculator4.tex new/doc/latex/calculator/calculator4.tex --- old/doc/latex/calculator/calculator4.tex 2012-07-23 19:28:43.000000000 +0200 +++ new/doc/latex/calculator/calculator4.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,2 +0,0 @@ -\MAX{1.256}{3.214}{\sol} -\[\max(1.256,3.214)=\sol\] diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/calculator/calculator40.tex new/doc/latex/calculator/calculator40.tex --- old/doc/latex/calculator/calculator40.tex 2012-07-23 19:28:43.000000000 +0200 +++ new/doc/latex/calculator/calculator40.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,11 +0,0 @@ -\SCALARPRODUCT(1,-1)(3,5){\sol} -$(1,-1)\cdot(3,5)=\sol$ - -\SCALARPRODUCT(1,-1,2)(3,5,-1){\sol} -$(1,-1,2)\cdot(3,5,-1)=\sol$ - -\VECTORNORM(3,4)\sol -$\left\|(3,4)\right\|=\sol$ - -\VECTORNORM(1,2,-2)\sol -$\left\|(1,2,-2)\right\|=\sol$ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/calculator/calculator41.tex new/doc/latex/calculator/calculator41.tex --- old/doc/latex/calculator/calculator41.tex 2012-07-23 19:28:43.000000000 +0200 +++ new/doc/latex/calculator/calculator41.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,5 +0,0 @@ -\UNITVECTOR(3,4)(\sola,\solb) -$(\sola,\solb)$ - -\UNITVECTOR(1,2,-2)(\sola,\solb,\solc) -$(\sola,\solb,\solc)$ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/calculator/calculator42.tex new/doc/latex/calculator/calculator42.tex --- old/doc/latex/calculator/calculator42.tex 2012-07-23 19:28:43.000000000 +0200 +++ new/doc/latex/calculator/calculator42.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,5 +0,0 @@ -\VECTORABSVALUE(3,-4)(\sola,\solb) -$(\sola,\solb)$ - -\VECTORABSVALUE(3,-4,-1)(\sola,\solb,\solc) -$(\sola,\solb,\solc)$ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/calculator/calculator43.tex new/doc/latex/calculator/calculator43.tex --- old/doc/latex/calculator/calculator43.tex 2012-07-23 19:28:43.000000000 +0200 +++ new/doc/latex/calculator/calculator43.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,11 +0,0 @@ -\MATRIXCOPY(1, -1, 2; - 3, 0, 5; - -1, 1, 4)% - (\sola,\solb,\solc; - \sold,\sole,\solf; - \solg,\solh,\soli) -$\begin{bmatrix} - \sola & \solb & \solc \\ - \sold & \sole & \solf \\ - \solg & \solh & \soli - \end{bmatrix}$ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/calculator/calculator44.tex new/doc/latex/calculator/calculator44.tex --- old/doc/latex/calculator/calculator44.tex 2012-07-23 19:28:43.000000000 +0200 +++ new/doc/latex/calculator/calculator44.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,7 +0,0 @@ -\TRANSPOSEMATRIX(1,-1;3,0)% - (\sola,\solb;\solc,\sold) -$\begin{bmatrix} - 1 & -1 \\ 3 & 0 - \end{bmatrix}^T=\begin{bmatrix} - \sola & \solb \\ \solc & \sold - \end{bmatrix}$ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/calculator/calculator45.tex new/doc/latex/calculator/calculator45.tex --- old/doc/latex/calculator/calculator45.tex 2012-07-23 19:28:43.000000000 +0200 +++ new/doc/latex/calculator/calculator45.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,21 +0,0 @@ -\MATRIXADD(1,-1;3,0)(3,5;-3,2)% - (\sola,\solb;\solc,\sold) -$\begin{bmatrix} - 1 & -1 \\ 3 & 0 - \end{bmatrix}+ -\begin{bmatrix} - 3 & 5 \\ -3 & 2 - \end{bmatrix}=\begin{bmatrix} - \sola & \solb \\ \solc & \sold - \end{bmatrix}$ - -\MATRIXSUB(1,-1;3,0)(3,5;-3,2)% - (\sola,\solb;\solc,\sold) -$\begin{bmatrix} - 1 & -1 \\ 3 & 0 - \end{bmatrix}- -\begin{bmatrix} - 3 & 5 \\ -3 & 2 - \end{bmatrix}=\begin{bmatrix} - \sola & \solb \\ \solc & \sold - \end{bmatrix}$ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/calculator/calculator46.tex new/doc/latex/calculator/calculator46.tex --- old/doc/latex/calculator/calculator46.tex 2012-07-23 19:28:43.000000000 +0200 +++ new/doc/latex/calculator/calculator46.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,14 +0,0 @@ -\SCALARMATRIXPRODUCT{3}(1,-1,2; - 3, 0,5; - -1, 1,4)% - (\sola,\solb,\solc; - \sold,\sole,\solf; - \solg,\solh,\soli) -$3\begin{bmatrix} - 1 & -1 & 2 \\ 3 & 0 & 5 \\ -1 & 1 & 4 - \end{bmatrix} - =\begin{bmatrix} - \sola & \solb & \solc \\ - \sold & \sole & \solf \\ - \solg & \solh & \soli - \end{bmatrix}$ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/calculator/calculator47.tex new/doc/latex/calculator/calculator47.tex --- old/doc/latex/calculator/calculator47.tex 2012-07-23 19:28:43.000000000 +0200 +++ new/doc/latex/calculator/calculator47.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,11 +0,0 @@ -\MATRIXVECTORPRODUCT(1,-1; - 0, 2)(3,5)(\sola,\solb) -$\begin{bmatrix} - 1 & -1 \\ 0 & 2 - \end{bmatrix} - \begin{bmatrix} - 3 \\ 5 - \end{bmatrix} - =\begin{bmatrix} - \sola \\ \solb - \end{bmatrix}$ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/calculator/calculator48.tex new/doc/latex/calculator/calculator48.tex --- old/doc/latex/calculator/calculator48.tex 2012-07-23 19:28:43.000000000 +0200 +++ new/doc/latex/calculator/calculator48.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,18 +0,0 @@ -\MATRIXPRODUCT(1,-1,2;3,0,5;-1,1,4)% - (3,5,-1;-3,2,-5;1,-2,3)% - (\sola,\solb,\solc; - \sold,\sole,\solf; - \solg,\solh,\soli) -\begin{multline*} -\begin{bmatrix} - 1 & -1 & 2 \\ 3 & 0 & 5 \\ -1 & 1 & 4 - \end{bmatrix} -\begin{bmatrix} - 3 & 5 & -1 \\ -3 & 2 & -5 \\ 1 & -2 & 3 - \end{bmatrix}\\ -=\begin{bmatrix} - \sola & \solb & \solc \\ - \sold & \sole & \solf \\ - \solg & \solh & \soli -\end{bmatrix} -\end{multline*} diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/calculator/calculator49.tex new/doc/latex/calculator/calculator49.tex --- old/doc/latex/calculator/calculator49.tex 2012-07-23 19:28:43.000000000 +0200 +++ new/doc/latex/calculator/calculator49.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,5 +0,0 @@ -\DETERMINANT(1,-1,2;3,0,5;-1,1,4){\sol} -\SpecialUsageIndex{\DETERMINANT}% -$\begin{vmatrix} - 1 & -1 & 2 \\ 3 & 0 & 5 \\ -1 & 1 & 4 - \end{vmatrix}=\sol$ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/calculator/calculator5.tex new/doc/latex/calculator/calculator5.tex --- old/doc/latex/calculator/calculator5.tex 2012-07-23 19:28:43.000000000 +0200 +++ new/doc/latex/calculator/calculator5.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,2 +0,0 @@ -\MIN{1.256}{3.214}{\sol} -\sol diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/calculator/calculator50.tex new/doc/latex/calculator/calculator50.tex --- old/doc/latex/calculator/calculator50.tex 2012-07-23 19:28:43.000000000 +0200 +++ new/doc/latex/calculator/calculator50.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,8 +0,0 @@ -\INVERSEMATRIX(1,-1;3,5)(% - \sola,\solb;\solc,\sold) -$\begin{bmatrix} - 1 & -1 \\ 3 & 5 - \end{bmatrix}^{-1}= - \begin{bmatrix} - \sola & \solb \\ \solc & \sold - \end{bmatrix}$ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/calculator/calculator51.tex new/doc/latex/calculator/calculator51.tex --- old/doc/latex/calculator/calculator51.tex 2012-07-23 19:28:43.000000000 +0200 +++ new/doc/latex/calculator/calculator51.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,9 +0,0 @@ -\MATRIXABSVALUE(1,-1,2;3,0,5;-1,1,4)% - (\sola,\solb,\solc; - \sold,\sole,\solf; - \solg,\solh,\soli) -$\begin{bmatrix} - \sola & \solb & \solc \\ - \sold & \sole & \solf \\ - \solg & \solh & \soli - \end{bmatrix}$ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/calculator/calculator52.tex new/doc/latex/calculator/calculator52.tex --- old/doc/latex/calculator/calculator52.tex 2012-07-23 19:28:43.000000000 +0200 +++ new/doc/latex/calculator/calculator52.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,15 +0,0 @@ -\SOLVELINEARSYSTEM(1,-1,2;3,0,5;-1,1,4)% - (-4,4,-2)% - (\sola,\solb,\solc) -Solving the linear system -\[ -\begin{bmatrix} - 1 & -1 & 2 \\ 3 & 0 & 5 \\ -1 & 1 & 4 - \end{bmatrix}\mathsf{X}=\begin{bmatrix} - -4\\4\\-2 - \end{bmatrix} -\] -we obtain -$\mathsf{X}=\begin{bmatrix} - \sola \\ \solb\\ \solc - \end{bmatrix}$ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/calculator/calculator53.tex new/doc/latex/calculator/calculator53.tex --- old/doc/latex/calculator/calculator53.tex 2012-07-23 19:28:43.000000000 +0200 +++ new/doc/latex/calculator/calculator53.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,5 +0,0 @@ -\SQUAREfunction{3}{\sol}{\Dsol} -If $f(t)=t^2$, then -\[ - f(3)=\sol \mbox{ and } f'(3)=\Dsol -\] diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/calculator/calculator54.tex new/doc/latex/calculator/calculator54.tex --- old/doc/latex/calculator/calculator54.tex 2012-07-23 19:28:43.000000000 +0200 +++ new/doc/latex/calculator/calculator54.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,15 +0,0 @@ -$\begin{array}{cll} -x & \log x & \log' x \\ -\LOGfunction{1}{\logx}{\Dlogx} -1 &\logx & \Dlogx\\ -\LOGfunction{2}{\logx}{\Dlogx} -2 &\logx & \Dlogx\\ -\LOGfunction{3}{\logx}{\Dlogx} -3 &\logx & \Dlogx\\ -\LOGfunction{4}{\logx}{\Dlogx} -4 &\logx & \Dlogx\\ -\LOGfunction{5}{\logx}{\Dlogx} -5 &\logx & \Dlogx\\ -\LOGfunction{6}{\logx}{\Dlogx} -6 &\logx & \Dlogx -\end{array}$ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/calculator/calculator55.tex new/doc/latex/calculator/calculator55.tex --- old/doc/latex/calculator/calculator55.tex 2012-07-23 19:28:43.000000000 +0200 +++ new/doc/latex/calculator/calculator55.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,30 +0,0 @@ -% exp(-t) - \SCALEVARIABLEfunction - {-1}{\EXPfunction} - {\NEGEXPfunction} - -% exp(-t)cos(t) - \PRODUCTfunction - {\NEGEXPfunction} - {\COSfunction} - {\NEGEXPCOSfunction} - -% 3t^2-2exp(-t)cos(t) - \LINEARCOMBINATIONfunction - {3}{\SQUAREfunction} - {-2}{\NEGEXPCOSfunction} - {\myfunction} - -\myfunction{5}{\sol}{\Dsol} - -If -\[ - f(t)=3t^2-2\mathrm{e}^{-t}\cos t -\] -then -\[ -\begin{gathered} - f(5)=\sol\\ - f'(5)=\Dsol -\end{gathered} -\] diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/calculator/calculator56.tex new/doc/latex/calculator/calculator56.tex --- old/doc/latex/calculator/calculator56.tex 2012-07-23 19:28:43.000000000 +0200 +++ new/doc/latex/calculator/calculator56.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,4 +0,0 @@ -% \mypoly=1-x^2+x^3 - \newcpoly{\mypoly}{1}{0}{-1}{1} - \mypoly{2}{\sol}{\Dsol} -$p'(2)=\Dsol$ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/calculator/calculator57.tex new/doc/latex/calculator/calculator57.tex --- old/doc/latex/calculator/calculator57.tex 2012-07-23 19:28:43.000000000 +0200 +++ new/doc/latex/calculator/calculator57.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,9 +0,0 @@ -For the $f(t)=(t^2,t^3)$ function we have -\VECTORfunction - {\SQUAREfunction}{\CUBEfunction}{\F} - -\F{4}{\solx}{\Dsolx}{\soly}{\Dsoly} - -\[ -f(4)=(\solx,\soly), f'(4)=(\Dsolx,\Dsoly) -\] diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/calculator/calculator6.tex new/doc/latex/calculator/calculator6.tex --- old/doc/latex/calculator/calculator6.tex 2012-07-23 19:28:43.000000000 +0200 +++ new/doc/latex/calculator/calculator6.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,2 +0,0 @@ -\ADD{1.256}{3.214}{\sol} -$1.256+3.214=\sol$ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/calculator/calculator7.tex new/doc/latex/calculator/calculator7.tex --- old/doc/latex/calculator/calculator7.tex 2012-07-23 19:28:43.000000000 +0200 +++ new/doc/latex/calculator/calculator7.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,2 +0,0 @@ -\SUBTRACT{1.256}{3.214}{\sol} -$1.256-3.214=\sol$ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/calculator/calculator8.tex new/doc/latex/calculator/calculator8.tex --- old/doc/latex/calculator/calculator8.tex 2012-07-23 19:28:43.000000000 +0200 +++ new/doc/latex/calculator/calculator8.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,2 +0,0 @@ -\MULTIPLY{1.256}{3.214}{\sol} -$1.256\times3.214=\sol$ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/calculator/calculator9.tex new/doc/latex/calculator/calculator9.tex --- old/doc/latex/calculator/calculator9.tex 2012-07-23 19:28:43.000000000 +0200 +++ new/doc/latex/calculator/calculator9.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,2 +0,0 @@ -\DIVIDE{1.256}{3.214}{\sol} -$1.256/3.214=\sol$ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/tlpkg/tlpobj/bera.doc.tlpobj new/tlpkg/tlpobj/bera.doc.tlpobj --- old/tlpkg/tlpobj/bera.doc.tlpobj 1970-01-01 01:00:00.000000000 +0100 +++ new/tlpkg/tlpobj/bera.doc.tlpobj 2010-10-10 04:05:12.000000000 +0200 @@ -0,0 +1,10 @@ +name bera.doc +category Package +revision 20031 +shortdesc doc files of bera +relocated 1 +docfiles size=10 + RELOC/doc/fonts/bera/LICENSE + RELOC/doc/fonts/bera/README + RELOC/doc/fonts/bera/bera.pdf + RELOC/doc/fonts/bera/bera.txt diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/tlpkg/tlpobj/calculator.doc.tlpobj new/tlpkg/tlpobj/calculator.doc.tlpobj --- old/tlpkg/tlpobj/calculator.doc.tlpobj 2012-07-24 04:33:45.000000000 +0200 +++ new/tlpkg/tlpobj/calculator.doc.tlpobj 1970-01-01 01:00:00.000000000 +0100 @@ -1,65 +0,0 @@ -name calculator.doc -category Package -revision 27112 -shortdesc doc files of calculator -relocated 1 -docfiles size=203 - RELOC/doc/latex/calculator/README - RELOC/doc/latex/calculator/calculator.pdf - RELOC/doc/latex/calculator/calculator1.tex - RELOC/doc/latex/calculator/calculator10.tex - RELOC/doc/latex/calculator/calculator11.tex - RELOC/doc/latex/calculator/calculator12.tex - RELOC/doc/latex/calculator/calculator13.tex - RELOC/doc/latex/calculator/calculator14.tex - RELOC/doc/latex/calculator/calculator15.tex - RELOC/doc/latex/calculator/calculator16.tex - RELOC/doc/latex/calculator/calculator17.tex - RELOC/doc/latex/calculator/calculator18.tex - RELOC/doc/latex/calculator/calculator19.tex - RELOC/doc/latex/calculator/calculator2.tex - RELOC/doc/latex/calculator/calculator20.tex - RELOC/doc/latex/calculator/calculator21.tex - RELOC/doc/latex/calculator/calculator22.tex - RELOC/doc/latex/calculator/calculator23.tex - RELOC/doc/latex/calculator/calculator24.tex - RELOC/doc/latex/calculator/calculator25.tex - RELOC/doc/latex/calculator/calculator26.tex - RELOC/doc/latex/calculator/calculator27.tex - RELOC/doc/latex/calculator/calculator28.tex - RELOC/doc/latex/calculator/calculator29.tex - RELOC/doc/latex/calculator/calculator3.tex - RELOC/doc/latex/calculator/calculator30.tex - RELOC/doc/latex/calculator/calculator31.tex - RELOC/doc/latex/calculator/calculator32.tex - RELOC/doc/latex/calculator/calculator33.tex - RELOC/doc/latex/calculator/calculator34.tex - RELOC/doc/latex/calculator/calculator35.tex - RELOC/doc/latex/calculator/calculator36.tex - RELOC/doc/latex/calculator/calculator37.tex - RELOC/doc/latex/calculator/calculator38.tex - RELOC/doc/latex/calculator/calculator39.tex - RELOC/doc/latex/calculator/calculator4.tex - RELOC/doc/latex/calculator/calculator40.tex - RELOC/doc/latex/calculator/calculator41.tex - RELOC/doc/latex/calculator/calculator42.tex - RELOC/doc/latex/calculator/calculator43.tex - RELOC/doc/latex/calculator/calculator44.tex - RELOC/doc/latex/calculator/calculator45.tex - RELOC/doc/latex/calculator/calculator46.tex - RELOC/doc/latex/calculator/calculator47.tex - RELOC/doc/latex/calculator/calculator48.tex - RELOC/doc/latex/calculator/calculator49.tex - RELOC/doc/latex/calculator/calculator5.tex - RELOC/doc/latex/calculator/calculator50.tex - RELOC/doc/latex/calculator/calculator51.tex - RELOC/doc/latex/calculator/calculator52.tex - RELOC/doc/latex/calculator/calculator53.tex - RELOC/doc/latex/calculator/calculator54.tex - RELOC/doc/latex/calculator/calculator55.tex - RELOC/doc/latex/calculator/calculator56.tex - RELOC/doc/latex/calculator/calculator57.tex - RELOC/doc/latex/calculator/calculator6.tex - RELOC/doc/latex/calculator/calculator7.tex - RELOC/doc/latex/calculator/calculator8.tex - RELOC/doc/latex/calculator/calculator9.tex ++++++ calculator.doc.tar.xz -> bera.tar.xz ++++++ ++++ 10508 lines of diff (skipped) ++++++ cantarell.doc.tar.xz -> betababel.doc.tar.xz ++++++ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/fonts/cantarell/CHANGES new/doc/fonts/cantarell/CHANGES --- old/doc/fonts/cantarell/CHANGES 2012-07-15 16:42:23.000000000 +0200 +++ new/doc/fonts/cantarell/CHANGES 1970-01-01 01:00:00.000000000 +0100 @@ -1,19 +0,0 @@ -Changelog for version 2.0: - - complete rewrite of the fontinst driver file - - rename .vf and .tfm files based on the pattern <font>-<encoding> - - change slant angle for italics to comply with the slant of the first - italics versions of Cantarell - - modify paths of the archive: documentation is now in - doc/fonts/cantarell/ and sources in source/fonts/cantarell/ - -Changelog for version 2.1: - - update font files to version 0.0.7 - -Changelog for version 2.2: - - remove unneeded call to textcomp package in cantarell.sty - -Changelog for version 2.3: - - update font files to version 0.0.8 - -Changelog for version 2.4: - - update font files to version 0.0.9; Cyrillic support is included diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/fonts/cantarell/README new/doc/fonts/cantarell/README --- old/doc/fonts/cantarell/README 2012-07-15 16:42:23.000000000 +0200 +++ new/doc/fonts/cantarell/README 1970-01-01 01:00:00.000000000 +0100 @@ -1,22 +0,0 @@ ------------------------- - Cantarell, version 2.4 ------------------------- - -Cantarell is a contemporary Humanist sans serif designed by Dave Crossland and -Jakub Steiner. This font, delivered under the OFL version 1.1, is available on -The GNOME download server at -http://download.gnome.org/sources/cantarell-fonts/0.0/. - -This package provides support for this font in LaTeX. It includes Type 1 -versions of the fonts, converted for this package using FontForge from its -sources, for full support with Dvips. - -Installation and usage instructions are described in -doc/fonts/cantarell/cantarell.pdf. - -This package is released under the LaTeX Project Public License, either version -1.3c or above, with the exception of the .pfb and .sfd files, released under the -Open Font License version 1.1. - -If you have comments about the package, please contact Mohamed El Morabity -(melmorabity AT fedoraproject DOT org). Files old/doc/fonts/cantarell/cantarell-samples.pdf and new/doc/fonts/cantarell/cantarell-samples.pdf differ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/fonts/cantarell/cantarell-samples.tex new/doc/fonts/cantarell/cantarell-samples.tex --- old/doc/fonts/cantarell/cantarell-samples.tex 2012-07-15 16:42:23.000000000 +0200 +++ new/doc/fonts/cantarell/cantarell-samples.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,76 +0,0 @@ -%% cantarell-samples.tex -%% Copyright 2011, 2012 Mohamed El Morabity -% -% This work may be distributed and/or modified under the conditions of the LaTeX -% Project Public License, either version 1.3 of this license or (at your option) -% any later version. The latest version of this license is in -% http://www.latex-project.org/lppl.txt and version 1.3 or later is part of all -% distributions of LaTeX version 2005/12/01 or later. -% -% This work has the LPPL maintenance status `maintained'. -% -% The Current Maintainer of this work is Mohamed El Morabity -% -% This work consists of all files listed in manifest.txt. - -\documentclass{article} - -\usepackage[russian,francais,american]{babel} -\usepackage{cantarell} -\usepackage[T2A,T1,OT1]{fontenc} -\usepackage[utf8x]{inputenc} -\usepackage{microtype} -\usepackage{textcomp} - -\newcommand{\latinSample}{% - \foreignlanguage{francais}{% - Tous les êtres humains naissent libres et égaux en dignité et en droits. Ils - sont doués de raison et de conscience et doivent agir les uns envers les - autres dans un esprit de fraternité.% - }% -} - -\newcommand{\cyrillicSample}{% - \foreignlanguage{russian}{% - Все люЎО рПжЎаются свПбПЎМыЌО О равМыЌО в свПеЌ ЎПстПОМстве О правах. ОМО - МаЎелеМы разуЌПЌ О сПвестью О ЎПлжМы пПступать в ПтМПшеМОО Ўруг Ўруга в Ўухе - братства.% - }% -} - -\newcommand{\miscSample}{% - 0123456789 ff fi fl ffi ffl \textperthousand{} \textcopyright{} - \textregistered{} \texttrademark{} \texteuro{} \textsterling{} \textyen% -} - -\newcommand{\fontSample}[2]{% - {\usefont{T1}{fca}{#1}{#2} \latinSample} - - {\usefont{T2A}{fca}{#1}{#2}\cyrillicSample} - - {\fontfamily{fca}\fontseries{#1}\fontshape{#2}\selectfont\miscSample}\\% -} - -\begin{document} - -\section*{Cantarell Regular} - -\fontSample{m}{n} - -\fontSample{m}{sl} - -\fontSample{m}{sc} - -\fontSample{m}{scsl} - -\section*{Cantarell Bold} - -\fontSample{b}{n} - -\fontSample{b}{sl} - -\fontSample{b}{sc} - -\fontSample{b}{scsl} - -\end{document} Files old/doc/fonts/cantarell/cantarell.pdf and new/doc/fonts/cantarell/cantarell.pdf differ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/fonts/cantarell/cantarell.tex new/doc/fonts/cantarell/cantarell.tex --- old/doc/fonts/cantarell/cantarell.tex 2012-07-15 16:42:23.000000000 +0200 +++ new/doc/fonts/cantarell/cantarell.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,194 +0,0 @@ -%% cantarell.tex -%% Copyright 2011, 2012 Mohamed El Morabity -% -% This work may be distributed and/or modified under the conditions of the LaTeX -% Project Public License, either version 1.3 of this license or (at your option) -% any later version. The latest version of this license is in -% http://www.latex-project.org/lppl.txt and version 1.3 or later is part of all -% distributions of LaTeX version 2005/12/01 or later. -% -% This work has the LPPL maintenance status `maintained'. -% -% The Current Maintainer of this work is Mohamed El Morabity -% -% This work consists of all files listed in manifest.txt. - -\documentclass{article} - -\usepackage[american]{babel} -\usepackage{booktabs} -\usepackage[default]{cantarell} -\usepackage{microtype} -\usepackage{multirow} -\usepackage{path} -\usepackage{varioref} -\usepackage[colorlinks]{hyperref} - -\hypersetup{% - pdftitle={LaTeX support for Cantarell},% - pdfauthor={Mohamed El Morabity}% -}% - -\newcommand{\acronym}[1]{\textsc{\lowercase{#1}}} -\newcommand{\code}{\texttt} -\newcommand{\command}{\texttt} -\newcommand{\email}[1]{\href{mailto:#1}{\nolinkurl{#1}}} -\newcommand{\name}{} -\newcommand{\package}{\texttt} -\newcommand{\parameter}[1]{\textnormal{\textit{#1}}} -\newcommand{\program}{} - -\title{\LaTeX{} support for Cantarell\\Version~2.4} - -\author{Mohamed \name{El~Morabity}\\\email{melmorabity@fedoraproject.org}} - -\begin{document} - -\maketitle - -\tableofcontents - -\section{Introduction} - -Cantarell is a contemporary Humanist sans serif designed initially by Dave -\name{Crossland} and maintained by Jakub \name{Steiner} (see -figure~\vref{styles}). This font, delivered under the \acronym{OFL} version~1.1, -is available on the \acronym{GNOME} download server~\cite{cantarell}. - -\begin{figure} - \centering - {% - \fcafamily% - Cantarell Regular\\ - {\bfseries Cantarell Bold} - } - \caption{Available styles for Cantarell} - \label{styles} -\end{figure} - -This package provides support for this font in \LaTeX{}. It includes Type~1 -versions of the fonts, converted from its sources using \program{FontForge}, for -full support with \program{Dvips}. - -\section{Installation} - -These directions assume that your \TeX{} distribution is -\acronym{TDS}-compliant. - -Once the \path|cantarell.zip| archive extracted: -\begin{enumerate} -\item Copy \path|doc/|, \path|fonts/|, \path|source/|, and \path|tex/| - directories to your \path|texmf/| directory (either your local or global - \path|texmf/| directory). -\item Run \command{mktexlsr} to refresh the file name database and make \TeX{} - aware of the new files. -\item Run \command{updmap --enable Map=cantarell.map} to make \program{Dvips}, - \program{dvipdf} and \program{pdf\TeX} aware of the new fonts. -\end{enumerate} - -Note that this package requires the \package{keyval}~\cite{keyval} and -\package{slantsc}~\cite{slantsc} (to handle italic/slanted small caps) ones to -work. - -\section{Usage} - -\subsection{Calling Cantarell} - -You can use the Cantarell font in a \LaTeX{} document by adding the command -\begin{verbatim} -\usepackage{cantarell} -\end{verbatim} -to the preamble. The package supplies the \code{\char`\\fcafamily} command to -switch the current font to Cantarell. - -\subsection{Options} - -\subsubsection{Cantarell as default (sans-serif) font} - -You can set \LaTeX{} to use Cantarell as standard font throughout the whole -document by passing the \code{default} option to the package: -\begin{verbatim} -\usepackage[default]{cantarell} -\end{verbatim} -To set Cantarell as default sans-serif only: -\begin{verbatim} -\usepackage[defaultsans]{cantarell} -\end{verbatim} - -\subsubsection{Font scaling} - -The font can be up- and downscale by any factor. This can be used to make -Cantarell more friendly when used in company with other type faces, e.g., to -adapt the x-height. The package option \code{scale=\parameter{ratio}} will scale -the font according to \parameter{ratio} (1.0 by default), for example: -\begin{verbatim} -\usepackage[scale=0.95]{cantarell} -\end{verbatim} - -\subsection{Encodings} - -The following encodings are supported: -\begin{description} -\item[Latin] OT1, T1, TS1 (partial) -\item[Cyrillic] T2A, T2B, T2C, X2 -% \item[Greek] LGR (monotonic only) -\end{description} -To use one or another encoding, give the \LaTeX{} name to the \package{fontenc} -package as usual, as in -\begin{verbatim} -\usepackage[T1]{fontenc} -\usepackage{cantarell} -\end{verbatim} - -\subsection{Available weights and variants} - -Table~\vref{nfss} lists the available font series and shapes with their -\acronym{NFSS} classification. Parenthesized combinations are provided via -substitutions. -\begin{table} - \centering - \begin{tabular}{llll} - \toprule - family&encoding&series&shape\\ - \midrule - \multirow{3}{*}{fca}&OT1,T1,&\multirow{3}{*}{m, b (bx)}&\multirow{2}{*}{n, sl (it), sc, scsl (scit)}\\ - &T2A, T2B, T2C, X2,&&\\ -% &LGR&&\\ - \cmidrule{2-2} - \cmidrule{4-4} - &TS1&&n, sl (it)\\ - \bottomrule - \end{tabular} - \caption{Available font series and shapes for Cantarell} - \label{nfss} -\end{table} -Notice that the slanted shapes are faked ones, as well as the small capitals -(reduced to 80\%). - -Samples of the font are available in the -\href{run:cantarell-samples.pdf}{\path|cantarell-samples.pdf|} file. - -\section{Known bugs and improvements} - -Please send bug reports and suggestions about the Cantarell \LaTeX{} support to -\href{mailto:melmorabity@fedoraproject.org}{Mohamed \name{El~Morabity}}, neither -to Dave \name{Crossland} nor the \acronym{GNOME} project. They only distribute -the font files themselves. - -\section{License} - -This package is released under the \LaTeX{} project public license, either -version~1.3c or above~\cite{lppl}. Anyway both the Type~1 and Fontforge source -files are delivered under the Open Font License version~1.1~\cite{ofl}. - -\begin{thebibliography}{9} -\bibitem{cantarell} \url{http://download.gnome.org/sources/cantarell-fonts/0.0/} -\bibitem{keyval} - \url{http://www.ctan.org/tex-archive/macros/latex/required/graphics/} -\bibitem{slantsc} - \url{http://www.ctan.org/tex-archive/macros/latex/contrib/slantsc/} -\bibitem{lppl} \url{http://www.latex-project.org/lppl/lppl-1-3c.html} -\bibitem{ofl} \url{http://scripts.sil.org/OFL_web} -\end{thebibliography} - -\end{document} diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/fonts/cantarell/manifest.txt new/doc/fonts/cantarell/manifest.txt --- old/doc/fonts/cantarell/manifest.txt 2012-07-15 16:42:23.000000000 +0200 +++ new/doc/fonts/cantarell/manifest.txt 1970-01-01 01:00:00.000000000 +0100 @@ -1,153 +0,0 @@ -./README -./manifest.txt -./fonts/map/dvips/cantarell/cantarell.map -./fonts/tfm/public/cantarell/Cantarell-Regular-ot1.tfm -./fonts/tfm/public/cantarell/Cantarell-Regular-Slanted-02.tfm -./fonts/tfm/public/cantarell/Cantarell-Regular-Slanted-SmallCaps-x2.tfm -./fonts/tfm/public/cantarell/Cantarell-Bold-Slanted-SmallCaps-t2c.tfm -./fonts/tfm/public/cantarell/Cantarell-Bold-x2.tfm -./fonts/tfm/public/cantarell/Cantarell-Regular-t2b.tfm -./fonts/tfm/public/cantarell/Cantarell-Bold-SmallCaps-t2a.tfm -./fonts/tfm/public/cantarell/Cantarell-Regular-Slanted-SmallCaps-t2b.tfm -./fonts/tfm/public/cantarell/Cantarell-Regular-03.tfm -./fonts/tfm/public/cantarell/Cantarell-Bold-SmallCaps-ot1.tfm -./fonts/tfm/public/cantarell/Cantarell-Regular-Slanted-03.tfm -./fonts/tfm/public/cantarell/Cantarell-Bold-Slanted-SmallCaps-t1.tfm -./fonts/tfm/public/cantarell/Cantarell-Regular-t2c.tfm -./fonts/tfm/public/cantarell/Cantarell-Bold-Slanted-02.tfm -./fonts/tfm/public/cantarell/Cantarell-Bold-Slanted-01.tfm -./fonts/tfm/public/cantarell/Cantarell-Bold-t2b.tfm -./fonts/tfm/public/cantarell/Cantarell-Regular-Slanted-ts1.tfm -./fonts/tfm/public/cantarell/Cantarell-Regular-Slanted-SmallCaps-t1.tfm -./fonts/tfm/public/cantarell/Cantarell-Regular-Slanted-t2c.tfm -./fonts/tfm/public/cantarell/Cantarell-Bold-SmallCaps-t2c.tfm -./fonts/tfm/public/cantarell/Cantarell-Bold-Slanted-t2b.tfm -./fonts/tfm/public/cantarell/Cantarell-Bold-t1.tfm -./fonts/tfm/public/cantarell/Cantarell-Regular-SmallCaps-t2b.tfm -./fonts/tfm/public/cantarell/Cantarell-Regular-SmallCaps-t2a.tfm -./fonts/tfm/public/cantarell/Cantarell-Bold-Slanted-ot1.tfm -./fonts/tfm/public/cantarell/Cantarell-Bold-Slanted-t2a.tfm -./fonts/tfm/public/cantarell/Cantarell-Bold-Slanted-SmallCaps-x2.tfm -./fonts/tfm/public/cantarell/Cantarell-Regular-SmallCaps-ot1.tfm -./fonts/tfm/public/cantarell/Cantarell-Bold-01.tfm -./fonts/tfm/public/cantarell/Cantarell-Bold-Slanted-03.tfm -./fonts/tfm/public/cantarell/Cantarell-Regular-Slanted-x2.tfm -./fonts/tfm/public/cantarell/Cantarell-Bold-ts1.tfm -./fonts/tfm/public/cantarell/Cantarell-Regular-SmallCaps-t1.tfm -./fonts/tfm/public/cantarell/Cantarell-Bold-t2a.tfm -./fonts/tfm/public/cantarell/Cantarell-Bold-Slanted-SmallCaps-ot1.tfm -./fonts/tfm/public/cantarell/Cantarell-Regular-Slanted-SmallCaps-t2a.tfm -./fonts/tfm/public/cantarell/Cantarell-Bold-t2c.tfm -./fonts/tfm/public/cantarell/Cantarell-Bold-SmallCaps-x2.tfm -./fonts/tfm/public/cantarell/Cantarell-Regular-02.tfm -./fonts/tfm/public/cantarell/Cantarell-Regular-Slanted-ot1.tfm -./fonts/tfm/public/cantarell/Cantarell-Bold-ot1.tfm -./fonts/tfm/public/cantarell/Cantarell-Regular-t2a.tfm -./fonts/tfm/public/cantarell/Cantarell-Bold-03.tfm -./fonts/tfm/public/cantarell/Cantarell-Bold-Slanted-t2c.tfm -./fonts/tfm/public/cantarell/Cantarell-Regular-Slanted-01.tfm -./fonts/tfm/public/cantarell/Cantarell-Regular-Slanted-SmallCaps-t2c.tfm -./fonts/tfm/public/cantarell/Cantarell-Bold-Slanted-SmallCaps-t2b.tfm -./fonts/tfm/public/cantarell/Cantarell-Regular-SmallCaps-x2.tfm -./fonts/tfm/public/cantarell/Cantarell-Bold-Slanted-SmallCaps-t2a.tfm -./fonts/tfm/public/cantarell/Cantarell-Regular-Slanted-SmallCaps-ot1.tfm -./fonts/tfm/public/cantarell/Cantarell-Bold-SmallCaps-t2b.tfm -./fonts/tfm/public/cantarell/Cantarell-Regular-01.tfm -./fonts/tfm/public/cantarell/Cantarell-Regular-x2.tfm -./fonts/tfm/public/cantarell/Cantarell-Regular-SmallCaps-t2c.tfm -./fonts/tfm/public/cantarell/Cantarell-Regular-Slanted-t2a.tfm -./fonts/tfm/public/cantarell/Cantarell-Bold-Slanted-t1.tfm -./fonts/tfm/public/cantarell/Cantarell-Bold-02.tfm -./fonts/tfm/public/cantarell/Cantarell-Regular-Slanted-t1.tfm -./fonts/tfm/public/cantarell/Cantarell-Bold-SmallCaps-t1.tfm -./fonts/tfm/public/cantarell/Cantarell-Bold-Slanted-ts1.tfm -./fonts/tfm/public/cantarell/Cantarell-Regular-ts1.tfm -./fonts/tfm/public/cantarell/Cantarell-Regular-Slanted-t2b.tfm -./fonts/tfm/public/cantarell/Cantarell-Regular-t1.tfm -./fonts/tfm/public/cantarell/Cantarell-Bold-Slanted-x2.tfm -./fonts/vf/public/cantarell/Cantarell-Bold-Slanted-t2b.vf -./fonts/vf/public/cantarell/Cantarell-Bold-ts1.vf -./fonts/vf/public/cantarell/Cantarell-Regular-Slanted-t2b.vf -./fonts/vf/public/cantarell/Cantarell-Regular-Slanted-t1.vf -./fonts/vf/public/cantarell/Cantarell-Bold-SmallCaps-t2b.vf -./fonts/vf/public/cantarell/Cantarell-Bold-Slanted-t2a.vf -./fonts/vf/public/cantarell/Cantarell-Regular-t2b.vf -./fonts/vf/public/cantarell/Cantarell-Bold-Slanted-SmallCaps-t2c.vf -./fonts/vf/public/cantarell/Cantarell-Bold-t2c.vf -./fonts/vf/public/cantarell/Cantarell-Regular-t2c.vf -./fonts/vf/public/cantarell/Cantarell-Bold-Slanted-SmallCaps-ot1.vf -./fonts/vf/public/cantarell/Cantarell-Bold-x2.vf -./fonts/vf/public/cantarell/Cantarell-Regular-ot1.vf -./fonts/vf/public/cantarell/Cantarell-Regular-t2a.vf -./fonts/vf/public/cantarell/Cantarell-Regular-SmallCaps-t2b.vf -./fonts/vf/public/cantarell/Cantarell-Bold-SmallCaps-ot1.vf -./fonts/vf/public/cantarell/Cantarell-Bold-Slanted-ts1.vf -./fonts/vf/public/cantarell/Cantarell-Bold-Slanted-SmallCaps-x2.vf -./fonts/vf/public/cantarell/Cantarell-Bold-Slanted-SmallCaps-t2a.vf -./fonts/vf/public/cantarell/Cantarell-Regular-SmallCaps-t1.vf -./fonts/vf/public/cantarell/Cantarell-Regular-Slanted-ot1.vf -./fonts/vf/public/cantarell/Cantarell-Regular-Slanted-SmallCaps-t2b.vf -./fonts/vf/public/cantarell/Cantarell-Regular-Slanted-t2a.vf -./fonts/vf/public/cantarell/Cantarell-Regular-SmallCaps-ot1.vf -./fonts/vf/public/cantarell/Cantarell-Regular-Slanted-ts1.vf -./fonts/vf/public/cantarell/Cantarell-Regular-Slanted-SmallCaps-t2a.vf -./fonts/vf/public/cantarell/Cantarell-Regular-Slanted-SmallCaps-t2c.vf -./fonts/vf/public/cantarell/Cantarell-Regular-SmallCaps-t2c.vf -./fonts/vf/public/cantarell/Cantarell-Regular-Slanted-t2c.vf -./fonts/vf/public/cantarell/Cantarell-Regular-ts1.vf -./fonts/vf/public/cantarell/Cantarell-Bold-Slanted-SmallCaps-t1.vf -./fonts/vf/public/cantarell/Cantarell-Bold-SmallCaps-t2a.vf -./fonts/vf/public/cantarell/Cantarell-Regular-x2.vf -./fonts/vf/public/cantarell/Cantarell-Bold-ot1.vf -./fonts/vf/public/cantarell/Cantarell-Bold-t2a.vf -./fonts/vf/public/cantarell/Cantarell-Regular-Slanted-SmallCaps-ot1.vf -./fonts/vf/public/cantarell/Cantarell-Bold-SmallCaps-x2.vf -./fonts/vf/public/cantarell/Cantarell-Bold-t2b.vf -./fonts/vf/public/cantarell/Cantarell-Bold-Slanted-x2.vf -./fonts/vf/public/cantarell/Cantarell-Regular-t1.vf -./fonts/vf/public/cantarell/Cantarell-Bold-t1.vf -./fonts/vf/public/cantarell/Cantarell-Bold-SmallCaps-t2c.vf -./fonts/vf/public/cantarell/Cantarell-Bold-Slanted-ot1.vf -./fonts/vf/public/cantarell/Cantarell-Regular-SmallCaps-x2.vf -./fonts/vf/public/cantarell/Cantarell-Bold-Slanted-t2c.vf -./fonts/vf/public/cantarell/Cantarell-Regular-Slanted-SmallCaps-x2.vf -./fonts/vf/public/cantarell/Cantarell-Regular-Slanted-SmallCaps-t1.vf -./fonts/vf/public/cantarell/Cantarell-Bold-SmallCaps-t1.vf -./fonts/vf/public/cantarell/Cantarell-Regular-SmallCaps-t2a.vf -./fonts/vf/public/cantarell/Cantarell-Regular-Slanted-x2.vf -./fonts/vf/public/cantarell/Cantarell-Bold-Slanted-t1.vf -./fonts/vf/public/cantarell/Cantarell-Bold-Slanted-SmallCaps-t2b.vf -./fonts/afm/public/cantarell/Cantarell-Regular.afm -./fonts/afm/public/cantarell/Cantarell-Bold.afm -./fonts/enc/dvips/cantarell/cantarell-02.enc -./fonts/enc/dvips/cantarell/cantarell-03.enc -./fonts/enc/dvips/cantarell/cantarell-01.enc -./fonts/type1/public/cantarell/Cantarell-Bold.pfb -./fonts/type1/public/cantarell/Cantarell-Regular.pfb -./tex/latex/cantarell/t2cfca.fd -./tex/latex/cantarell/x2fca.fd -./tex/latex/cantarell/ts1fca.fd -./tex/latex/cantarell/cantarell.sty -./tex/latex/cantarell/t1fca.fd -./tex/latex/cantarell/t2afca.fd -./tex/latex/cantarell/ot1fca.fd -./tex/latex/cantarell/t2bfca.fd -./source/fonts/cantarell/Cantarell-Bold.sfd -./source/fonts/cantarell/cantarell-map.tex -./source/fonts/cantarell/cantarell-fixgreek.mtx -./source/fonts/cantarell/Cantarell-Regular.sfd -./source/fonts/cantarell/sfd2type1.pe -./source/fonts/cantarell/cantarell-fixcyrillic.mtx -./source/fonts/cantarell/cantarell-fixtextcomp.mtx -./source/fonts/cantarell/Makefile -./source/fonts/cantarell/cantarell-fixlatin.mtx -./source/fonts/cantarell/cantarell-02.etx -./source/fonts/cantarell/cantarell-drv.tex -./source/fonts/cantarell/cantarell-03.etx -./source/fonts/cantarell/cantarell-01.etx -./doc/fonts/cantarell/README -./doc/fonts/cantarell/cantarell-samples.tex -./doc/fonts/cantarell/cantarell.tex -./doc/fonts/cantarell/cantarell.pdf -./doc/fonts/cantarell/cantarell-samples.pdf -./doc/fonts/cantarell/CHANGES Files old/doc/latex/betababel/betatest.pdf and new/doc/latex/betababel/betatest.pdf differ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/betababel/betatest.tex new/doc/latex/betababel/betatest.tex --- old/doc/latex/betababel/betatest.tex 1970-01-01 01:00:00.000000000 +0100 +++ new/doc/latex/betababel/betatest.tex 2006-01-09 01:49:07.000000000 +0100 @@ -0,0 +1,191 @@ +\documentclass{article} +\usepackage[english]{betababel} +\usepackage{hyperref} + +\title{Documentation for the {\sf betababel.sty} package} +\author{Felix G. Berkemeier\thanks{ Questions, commentary and bug reports to \texttt{felix.berkemeier@gmx.de} please.}} +\date{2005/07/10} + + +\begin{document} +\maketitle +\begin{abstract} +The \textsf{betababel} package extends the \texttt{polutonikogreek} option of the \textsf{babel} package. It provides the possibility to directly type or paste in ancient Greek texts with diacritical characters coded by the common Beta Code convention. + +This file documents version 0.5 of \textsf{betababel.sty}. +\end{abstract} + +\tableofcontents +\section{Introduction} +Although the \LaTeX{} typesetting system is often used especially for its capabilities of displaying fancy formulas in scientific texts, there are plenty of other possible uses. Whoever wants a smooth layout made (almost) by itself freeing time to care for the content, not for its form, would use \LaTeX, \emph{if} other specific needs are satisfied as well. One (maybe very) specific, but nevertheless requested need is the possibility to type ancient Greek texts. These texts require not only the Greek alphabet, but special diacritics. As those are usually not supported as input characters, there exist some transliteration codes to describe the Greek characters and diacritics by representing them by Latin characters and ASCII signs. One very common code has been defined by the \textsc{Thesaurus Linguae Graecae}; it's called Beta Code. (For complete documentation of the code, visit \url{http://www.tlg.uci.edu/}.) + +The Beta Code assigns to every Greek letter one Latin letter, diacritical characters are coded by braces, slashes and other signs (see table below). All Latin input letters, uppercase or lowercase, are handled as lowercase; Greek uppercase letters are coded by an asterisk prefix. E.g.: *w = \bcode{*w} (uppercase omega). To place one or more special characters over (or in case of the iota subscript under) a Greek letter, they have to directly follow the letter to be placed on. There is an order to be respected in placing the diacritics: First comes (if there is) the spiritus or the diaeresis, then the accent and, finally, a iota subscriptum, eventually. Caution: For some reason (possibly because of the prefixing of diacritics of uppercase Greek letters), if the letter to whom the diacritics belong is an uppercase letter, the diacritical signs have to be placed between the asterisk and the letter, i.e. \emph{before} the letter! E.g.: *)/a = \bcode{*)/a} (uppercase alpha with smooth breathing and acute accent); a)/ = \bcode{a)/} (lowercase alpha with smooth breathing and acute accent). + +{\paragraph{Code table} +\begin{center} +\begin{tabular}{llllllllllll} +a & b & g & d & e & z & h & q & i & k & l & m\\ +\bcode{a} & \bcode{b} & \bcode{g} & \bcode{d} & \bcode{e} & \bcode{z} & \bcode{h} & \bcode{q} & \bcode{i} & \bcode{k} & \bcode{l} & \bcode{m}\\[.8em] +n & c & o & p & r & s & t & u & f & x & y & w\\ +\bcode{n} & \bcode{c} & \bcode{o} & \bcode{p} & \bcode{r} & \bcode{s} & \bcode{t} & \bcode{u} & \bcode{f} & \bcode{x} & \bcode{y} & \bcode{w} +\end{tabular} +\end{center}} + +Though, for instance, the semicolon `\texttt{;}' has another meaning in Greek than in Latin, it is still the same sign and thus the punctuation remains almost unchanged in Beta Code with the exception of the `\texttt{:}' that becomes `\bcode{:}'. + +\pagebreak[4] +{\paragraph{Code for the diacritics} +\begin{center} +\begin{tabular}{rc} +smooth breathing (spiritus lenis) & \verb')'\\ +rough breathing (spiritus asper) & \verb'('\\ +diaeresis & \verb'+'\\[.8em] +acute accent & \verb'/'\\ +grave accent & \verb'\'\\ +circumflex accent & \verb'='\\[.8em] +iota subscriptum & \verb'|'\\ +\end{tabular} +\end{center}} + +In section \ref{usage} you can find some examples for Beta Code text and the usage of \textsf{betababel}. + +\section{Betababel} +\subsection{Loading the package} +The \textsf{betababel} package is an extension to the widely used \textsf{babel} package that, therefore, has to be correctly installed in order to enable {\sf betababel} to work properly. To use \textsf{betababel} the \textsf{betababel.sty} file has to be in a directory searched by your \LaTeX{} system (if you don't know where this is, just copy the file into the directory you'll save your \LaTeX{} document) and your document must contain the line \verb'\usepackage['\textit{language option(s)}\verb']{betababel}' in its preamble. The possible language options are exactly the same as those of the \textsf{babel} package. By default \textsf{betababel} uses the \texttt{polutonikogreek} option of the \textsf{babel} package. If your text is written in another language, you should give the right option; for instance for a mostly English text that contains some ancient Greek passages, type: \verb'\usepackage[english]{betababel}'. + +Since \textsf{betababel} internally loads the \textsf{babel} package by itself, there \emph{must not} be a \verb'\usepackage[...]{babel}' command in your document preamble. If, for instance, you had a \verb'\usepackage[english,german]{babel}' in your document, just replace it by \verb'\usepackage[english,german]{betababel}'. + +Some of \textsf{betababel}'s extended functionality (\frenchspacing e.\ g. \nonfrenchspacing all the characters whose Beta Code uses the hash character `\#' --- added in version v0.5) requires Claudio Beccari's \textsf{teubner.sty} package. You can find it at \url{http://www.ctan.org/tex-archive/macros/latex/contrib/teubner/}. While \textsf{betababel} can be run without \textsf{teubner}, it than lacks some of its features. + +\subsection{Usage and examples} +\label{usage} +The \textsf{betababel} package provides two slightly different ways to insert Beta Code input into your \LaTeX{} document. You can enclose the Beta Code in an evironment using \verb'\begin{betacode}' and \verb'\end{betacode}' or you can pass the Beta Code through the argument of the \verb'\bcode{}' command. + +\subsubsection{The \texttt{betacode} environment} +The \texttt{betacode} environment inserts some vertical space before and after the Beta Code input. The amount of this space can be set through the length \verb'\betaskip'. All paragraphs within the \texttt{betacode} environment will be indented just like standard paragraphs, i.e. by the length \verb=\parindent=. + +The text used for the following example has been taken from the \textsc{Thesaurus Linguae Graecae} (\url{http://www.tlg.uci.edu/}). + +\begin{betacode} +*)/ANDRA MOI E)/NNEPE, *MOU=SA, POLU/TROPON, O(\S MA/LA POLLA\ + +PLA/GXQH, E)PEI\ *TROI/HS I(ERO\N PTOLI/EQRON E)/PERSE: +\end{betacode} + +These lines have been produced by +\begin{verbatim} +\begin{betacode} +*)/ANDRA MOI E)/NNEPE, *MOU=SA, POLU/TROPON, O(\S MA/LA POLLA\ + +PLA/GXQH, E)PEI\ *TROI/HS I(ERO\N PTOLI/EQRON E)/PERSE: +\end{betacode} +\end{verbatim} + +\subsubsection{The \texttt{$\backslash$bcode} command} +The argument of the \verb'\bcode' command will be inserted in the output exactly where the command appears,\frenchspacing i.\ e. \nonfrenchspacing without any extra space before or after it. Paragraphs (= blank line) in the Beta Code input text are converted to line breaks and aren't indented. + +The text used for the following example has been taken from the \textsc{Perseus} Project (\url{http://www.perseus.tufts.edu/}).\bigskip + +Here starts the odyssee: \bcode{ +a)/ndra moi e)/nnepe, mou=sa, polu/tropon, o(\s ma/la polla\ + +pla/gxqh, e)pei\ *troi/hs i(ero\n ptoli/eqron e)/persen:} +To be continued \dots\bigskip + +These lines have been produced by +\begin{verbatim} +Here starts the odyssee: \bcode{ +a)/ndra moi e)/nnepe, mou=sa, polu/tropon, o(\s ma/la polla\ + +pla/gxqh, e)pei\ *troi/hs i(ero\n ptoli/eqron e)/persen:} +To be continued \dots +\end{verbatim} + +\subsection{Features} +\subsubsection{Placing of the diacritics} +As mentioned before, there is a difference in placing the diacritics on an uppercase or on a lowercase letter. But as there are some sources that don't respect this rule, \textsf{betababel} doesn't handle this strictly. It allows you to place the diacritics before or after an uppercase letter (if they are placed before \emph{and} after the letter, the ones after are neglected). + +\subsubsection{Inner-word and final sigma} +As defined in Beta Code, there is only one Latin representation (the character \texttt{s}) for both the inner-word and final sigma characters. \textsf{Betababel} therefore recognizes by itself which one's to be used. Beta Code, however, provides a way to determine explicitly the sigma by a suffix number: \texttt{s1} represents the inner-word sigma and \texttt{s2} the final sigma. For instance: \verb'\bcode{*)ana/basis s1 s2}' gives \bcode{*)ana/basis s1 s2}. + +Note: Sometimes it's found that the letter \texttt{j} is used to represent the final sigma. This, however, is not conform to the Beta Code convention. Therefore you shouldn't use it in your Beta Code texts. Since \textsf{betababel} handles the sigma automatically, you don't need an extra representation like \texttt{j}. If \textsf{betababel} finds a \texttt{j}, it displays a warning, but you can let continue the typesetting by hitting the return key; then, in most of the cases, the \texttt{j} will just be omitted. + +\subsubsection{Special characters} +\label{SpecChar} +If \textsf{betababel} detects a properly installed \textsf{teubner.sty} file of Claudio Beccari's \textsf{teubner} package, it will use it to be able to provide support for some additional special characters. The following table gives an overview over those characters and their Beta Code representation. + +\begin{center} +\begin{tabular}{r@{\hspace{0pt}}l@{\hspace{3pt}}l|c} +&&\textbf{BetaCode}&\textbf{Result}\\ +\hline\hline +&[&Left Square Bracket&\bcode{[}\\ +\hline +&]&Right Square Bracket&\bcode{]}\\ +\hline +&\#&Keraia&\bcode{#}\\ +\hline +&\#1&Koppa&\bcode{#1}\\ +\hline +&\#2&Stigma&\bcode{#2}\\ +{*}&\#2&Stigma&\bcode{*#2}\\ +\hline +&\#3&Coppa&\bcode{#3}\\ +{*}&\#3&Coppa&\bcode{*#3}\\ +\hline +&\#5&Sampi&\bcode{#5}\\ +{*}&\#5&Sampi&\bcode{*#5}\\ +\hline +&\#6&Paragraphos&\bcode{#6}\\ +\hline +&\#12&EM Dash&\bcode{#12}\\ +\hline +&\#22&low Keraia&\bcode{#22}\\ +\end{tabular} +\end{center} + +\subsubsection{Hyphenation} +\textsf{Betababel} simply converts the Beta Code to the input code for the \texttt{polutonikogreek} option of the \textsf{babel} package. Thus, it benefits from the Greek hyphenation capabilities of \textsf{babel}. + +\pagebreak[4] +\subsection{Known limitations} +\paragraph{Using \textsf{betababel} within footnotes or other commands} +\label{footbug} +I got some feedback drawing my attention to the fact that \textsf{betababel} doesn't handle grave accents within footnotes properly. This is due to the backslash `\verb=\=' that is used in Beta Code for the grave accent; in \LaTeX, however, it prefixes commands. I found a way to handle this problem in simple use of \textsf{betababel}, but: If the \verb=\bcode= command or the \texttt{betacode} environment is used within another command (like \verb=\footnote= or \verb=\section= etc.) all the content of the argument of this command seems to be checked for correctness; and when a backslash followed by some other characters is found, but not recognized as a known command (which will most likely be the case), \LaTeX{} will prompt an error message and/or ignore the backslash and the following characters. --- This seems to be a quite fundamental problem arising when backslashes are used for other purposes than as command prefixes, and up to now I didn't figure it out how to fix the bug. + +But to provide a way to properly generate grave accents in footnotes or within most other commands I added a little workaround to \textsf{betababel}. The modification doesn't eliminate the actual problem, but it allows to replace the impairing backslashes in footnotes or within other commands by exclamation marks `\texttt{!}'; they will work as a second transliteration for the grave accent. This is, of course, not conform to the Beta Code definition and thus against the original aims of the \textsf{betababel} package, but till I find a better solution it allows for using \textsf{betababel} to typeset Greek text in footnotes or within other commands. + +\section{Version history} +\subsection{Changes in v0.5 of 2005/07/10} +\begin{itemize} +\item Digamma support (\bcode{*v}, \bcode{v}) +\item Extended functionaliy of \textsf{betababel} by use of the \textsf{teubner.sty} package. Special characters added (see section \ref{SpecChar} on page \pageref{SpecChar}). +\end{itemize} + +\subsection{Changes in v0.4b of 2005/05/26} +\begin{itemize} +\item Fixed bug that prevented use of \textsf{betababel} within some commands like \verb=\section= and others. +\item Some minor optimizations. +\end{itemize} + +\subsection{Changes in v0.3 of 2004/04/20} +\begin{itemize} +\item Fixed the uppercase sigma bug. +\item Added workaround for the footnote bug (for further details see section \ref{footbug} on page \pageref{footbug}). +\item Reprogramming of the output routine. +\item Removed superfluous space after Greek text inserted using the \verb=\bcode= command. +\end{itemize} + +\subsection{Changes in v0.2 of 2003/07/21 (first released version)} +\begin{itemize} +\item Added automatic handling of inner-word and final sigma. +\item Support for the Beta Codes {\tt s1} and {\tt s2} (forced inner-word and final sigma). +\item Added {\tt betacode} environment. +\item Added some Warnings. +\end{itemize} + +\subsection{v0.1 of 2003/06} +\begin{itemize} +\item First try. For my own personal use only. Was able to perform the simple conversions from Beta Code to the transliteration used by the {\tt polutonikogreek} option of the {\sf babel} package. +\end{itemize} + +\end{document} \ No newline at end of file diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/tlpkg/tlpobj/betababel.doc.tlpobj new/tlpkg/tlpobj/betababel.doc.tlpobj --- old/tlpkg/tlpobj/betababel.doc.tlpobj 1970-01-01 01:00:00.000000000 +0100 +++ new/tlpkg/tlpobj/betababel.doc.tlpobj 2010-06-10 18:17:07.000000000 +0200 @@ -0,0 +1,8 @@ +name betababel.doc +category Package +revision 15878 +shortdesc doc files of betababel +relocated 1 +docfiles size=48 + RELOC/doc/latex/betababel/betatest.pdf + RELOC/doc/latex/betababel/betatest.tex diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/tlpkg/tlpobj/cantarell.doc.tlpobj new/tlpkg/tlpobj/cantarell.doc.tlpobj --- old/tlpkg/tlpobj/cantarell.doc.tlpobj 2012-07-16 04:36:36.000000000 +0200 +++ new/tlpkg/tlpobj/cantarell.doc.tlpobj 1970-01-01 01:00:00.000000000 +0100 @@ -1,13 +0,0 @@ -name cantarell.doc -category Package -revision 27066 -shortdesc doc files of cantarell -relocated 1 -docfiles size=64 - RELOC/doc/fonts/cantarell/CHANGES - RELOC/doc/fonts/cantarell/README - RELOC/doc/fonts/cantarell/cantarell-samples.pdf - RELOC/doc/fonts/cantarell/cantarell-samples.tex - RELOC/doc/fonts/cantarell/cantarell.pdf - RELOC/doc/fonts/cantarell/cantarell.tex - RELOC/doc/fonts/cantarell/manifest.txt ++++++ cantarell.tar.xz -> betababel.tar.xz ++++++ ++++ 3377 lines of diff (skipped) ++++++ covington.doc.tar.xz -> beton.doc.tar.xz ++++++ Files old/doc/latex/beton/beton.pdf and new/doc/latex/beton/beton.pdf differ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/beton/legal.txt new/doc/latex/beton/legal.txt --- old/doc/latex/beton/legal.txt 1970-01-01 01:00:00.000000000 +0100 +++ new/doc/latex/beton/legal.txt 2008-06-02 17:15:50.000000000 +0200 @@ -0,0 +1,13 @@ +The files of this package "beton" may be distributed and/or modified +under the conditions of the LaTeX Project Public License, either version +1.2 of this license or (at your option) any later version. The latest +version of this license is in + http://www.latex-project.org/lppl.txt +and version 1.2 or later is part of all distributions of LaTeX version +1999/12/01 or later. + +The complete listing of files covered by this license is + beton.dtx + beton.ins + +May 2002, Thomas Esser with permission of the copyright owner. Files old/doc/latex/covington/covington.pdf and new/doc/latex/covington/covington.pdf differ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/covington/covington.tex new/doc/latex/covington/covington.tex --- old/doc/latex/covington/covington.tex 2006-01-09 01:49:07.000000000 +0100 +++ new/doc/latex/covington/covington.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,484 +0,0 @@ -% File: covington.tex (in LaTeX2e) -% Documentation for covington.sty - -\documentclass{article} -\usepackage{covington} -\title{\bf Typing Linguistics with {\tt covington.sty}} -\author{Michael A. Covington \\ - \small Artificial Intelligence Center \\ - \small The University of Georgia \\ - \small Athens, Georgia 30602 \sc u.s.a.\\ - mcovingt@ai.uga.edu\\ - http://www.ai.uga.edu/$\sim$mc} -\date{2001 March 27} - -\begin{document} -\maketitle -{\footnotesize \tableofcontents} -\typeout{Run LaTeX twice to get a correct table of contents.} - -\section*{New in This Version} -\begin{itemize} -\item It is no longer necessary to type \verb"\it" to get proper italic type in feature structures. -\item Instructions have been rewritten with \LaTeXe\ users in mind. -\end{itemize} - -\section*{New in Preceding Versions} -\begin{itemize} -\item Multiple accents on a single letter (e.g., \emph{\acm{a}}) are supported. -\item This package is now called {\tt covington} (with the o) -and is compatible with \LaTeXe\ and NFSS as well as \LaTeX\ 2.09. -\item The vertical placement of labeled feature structures has -been changed -so that the category labels line up regardless of the size of -the structures. -\end{itemize} - -\section*{Introduction} -This file, {\tt covington.tex}, is the documentation for the -March 2001 version of {\tt covington.sty}, which is a \LaTeX\ style -option for typing many of the special notations common in linguistics. - -{\footnotesize -In em\TeX\ under MS-DOS, {\tt covington.sty} is called {\tt covingto.sty}. -The missing $n$ has no effect.} - -To use {\tt covington.sty}, you should have a copy of it in either your -current directory or the directory where \LaTeX\ styles are kept on your -system. - -Then, under \LaTeXe, -include the command -\verb"\usepackage{covington}" -after your \verb"\documentclass" command. - -{\footnotesize -In \LaTeX\ 2.09, -include {\tt covington} among the optional parameters of -\verb"\documentstyle", like this: \hfill\\ -{\tt -\verb"\documentstyle[12pt,"\underline{covington}\verb"]{article}" -}\hfill\\ -Note the spelling {\tt covington} (9 letters). -} - -In what follows I presume that you know how to use \LaTeX\ and have -access to the \LaTeX\ manual. Note that {\tt covington.sty} does not -provide any special fonts or character sets. However, it can be used in -combination with other style sheets that do. - -If you are using {\tt covington.sty} and {\tt uga.sty} (UGa thesis style) -together, you should mention {\tt uga} before {\tt covington}. - - -\section{Accents} - -\LaTeX\ provides a generous range of accents that can be placed on any -letter, such as: -\begin{flushleft} -\`{x} \'{x} \^{x} \"{x} \~{x} \={x} \H{x} \t{xx} \c{x} \d{x} \b{x} -\end{flushleft} -which are typed, respectively, as: -\begin{verbatim} -\`{x} \'{x} \^{x} \"{x} \~{x} \={x} \H{x} \t{xx} \c{x} \d{x} \b{x} -\end{verbatim} -\LaTeX also provides the foreign characters -\begin{flushleft}\obeyspaces -\i \j \ae \AE \oe \OE \aa \AA \o \O \l \L \ss ?` !` -\end{flushleft} -which are typed as: -\begin{verbatim} -\i \j \ae \AE \oe \OE \aa \AA \o \O \l \L \ss ?` !` -\end{verbatim} - -But by itself, \LaTeX\ doesn't give you a convenient way to put two -accents on the same letter. To fill this gap, {\tt covington.sty} provides -the following macros: -\begin{flushleft} -\verb,\twoacc[...|...], \quad to combine any 2 accents, e.g., - \verb.\twoacc[\~|\={a}]. = \twoacc[\~|\={a}]\\[6pt] -\verb,\acm{...}, \quad for acute over macron, e.g., \verb.\acm{a}. = \acm{a}\\ -\verb,\grm{...}, \quad for grave over macron, e.g., \verb.\grm{a}. = \grm{a}\\ -\verb,\cim{...}, \quad for circumflex over macron, e.g., \verb.\cim{a}. = \cim{a} -\end{flushleft} -The first of these is the general case and the latter three are special -cases that occur often in transcribing Greek. Now you can type -\emph{Koin\acm{e}} with both accents in place. - -Note the peculiar syntax of \verb.\twoacc. --- its arguments are in -square brackets, not curly brackets, and are separated by \verb.|.. -The first argument is the upper accent (only) and the second argument -is the letter with the lower accent indicated. - -Note also that not all accents work in the {\tt tabbing} environment. -Use {\tt tabular} or see the \LaTeX\ manual for workarounds. - -\section{Example numbers} - -Linguistics papers often include numbered examples. -The macro \verb"\exampleno" generates a new example number and can be -used anywhere you want the number to appear. For example, to display a -sentence with a number at the extreme right, do this: -\begin{verbatim} -\begin{flushleft} -This is a sentence. \hfill (\exampleno) -\end{flushleft} -\end{verbatim} -Here's what you get: -\begin{flushleft} -This is a sentence. \hfill (\exampleno) -\end{flushleft} -The example counter is actually the same as \LaTeX's equation counter, -so that if you use equations and numbered examples in the same -paper, you get a single continuous series of numbers. If you want to -access the number without changing it, use \verb"\theequation". - -Also, you can use \verb"\label" and \verb"\ref" with example numbers in -exactly the same way as with equation numbers. See the \LaTeX\ manual for -details. This applies to the {\tt example} and {\tt examples} -environments, described next, as well as to \verb"\exampleno" itself. - -\section{The {\tt example} environment} - -The {\tt example} environment displays a single example -with a generated example number to the left of it. -If you type -\begin{verbatim} -\begin{example} -This is a sentence. -\end{example} -\end{verbatim} -you get: -\begin{example} -This is a sentence. -\end{example} -The {\tt example} environment is a lot like {\tt flushleft}. The example -can be of any length; it can consist of many lines (separated by \verb"\\"), -or even whole paragraphs. - -One way to number sub--examples is to use {\tt itemize} or {\tt -enumerate} within an example, like this: -\begin{verbatim} -\begin{example} -\begin{itemize} -\item[(a)] This is the first sentence. -\item[(b)] This is the second sentence. -\end{itemize} -\end{example} -\end{verbatim} -This prints as: -\begin{example} -\begin{itemize} -\item[(a)] This is the first sentence. -\item[(b)] This is the second sentence. -\end{itemize} -\end{example} -However, the {\tt examples} environment, described next, is usually more -convenient. - -\section{The {\tt examples} environment} - -To display a series of examples together, each with its own example -number, use {\tt examples} instead of {\tt example}. The only -difference is that there can be more than one example, and each of them -has to be introduced by \verb"\item", like this: -\begin{verbatim} -\begin{examples} -\item This is the first sentence. -\item This is the second sentence. -\end{examples} -\end{verbatim} -This prints as: -\begin{examples} -\item This is the first sentence. -\item This is the second sentence. -\end{examples} - - -\section{Glossing sentences word--by--word} - -To gloss a sentence is to annotate it word--by--word. Most commonly, a -sentence in a foreign language is followed by a word--for--word -translation (with the words lined up vertically) and then a smooth -translation (not lined up), like this:% -\footnote{The macros for handling glosses are adapted with permission -from {\tt gloss.tex}, by Marcel R. van der Goot.} -\gll Dit is een Nederlands voorbeeld. - This is a Dutch example. -\glt `This is an example in Dutch.' -\glend -That particular example would be typed as: -\begin{verbatim} -\gll Dit is een Nederlands voorbeeld. - This is a Dutch example. -\glt `This is an example in Dutch.' -\glend -\end{verbatim} -Notice that the words do not have to be typed lining up; instead, \TeX\ -counts them. If the words in the two languages do not correspond -one--to--one, you can use curly brackets to show the intended grouping. -For example, to print -\gll Dit is een voorbeeldje in het Nederlands. - This is a {little example} in {} Dutch. -\glt `This is a little example in Dutch.' -\glend -you would type: -\begin{verbatim} -\gll Dit is een voorbeeldje in het Nederlands. - This is a {little example} in {} Dutch. -\glt `This is a little example in Dutch.' -\glend -\end{verbatim} -All together, {\tt covington.sty} gives you five macros for dealing with -glosses: -\begin{itemize} -\item \verb"\gll" introduces two lines of words vertically aligned, and -activates an environment very similar to {\tt flushleft}. -\item \verb"\glll" is like \verb"gll" except that it introduces {\em -three} lines of lined--up words (useful for cited forms, morphology, -and translation). -\item \verb"\glt" ends the set of lined--up lines and introduces a line -(or more) of translation. -\item \verb"\gln" is like \verb"\glt" but does not start a new line -(useful when no translation follows but you want to put a number on the -right). -\item \verb"\glend" ends the special {\tt flushleft}--like environment. -\end{itemize} -Here are several examples. First, a sentence with three lines aligned, -instead of just two: -\glll Hoc est aliud exemplum. - n.sg.nom 3.sg n.sg.nom n.sg.nom - This is another example. -\glt `This is another example.' -\glend -This is typed as: -\begin{verbatim} -\glll Hoc est aliud exemplum. - n.sg.nom 3.sg n.sg.nom n.sg.nom - This is another example. -\glt `This is another example.' -\glend -\end{verbatim} -Next, an example with a gloss but no translation, with an example number -at the right: -\gll Hoc habet numerum. - This has number -\gln \hfill (\exampleno) -\glend -That one was typed as: -\begin{verbatim} -\gll Hoc habet numerum. - This has number -\gln \hfill (\exampleno) -\glend -\end{verbatim} -Finally we'll put a glossed sentence inside the {\tt example} -environment, which is a very common way of using it: -\begin{example} -\gll Hoc habet numerum praepositum. - This has number preposed -\glt `This one has a number in front of it.' -\glend -\end{example} -This last example was, of course, typed as: -\begin{verbatim} -\begin{example} -\gll Hoc habet numerum praepositum. - This has number preposed -\glt `This one has a number in front of it.' -\glend -\end{example} -\end{verbatim} -Notice that every glossed sentence begins with either \verb"\gll" or -\verb"\glll", then contains either \verb"\glt" or \verb"\gln", and ends -with \verb"\glend". Layout is critical in the part preceding -\verb"\glt" or \verb"\gln", and fairly free afterward. - -\section{Phrase structure rules} - -To print the phrase structure rule \psr{S}{NP~VP} you can type -\verb"\psr{S}{NP~VP}", and likewise for other phrase structure rules. - -\section{Feature structures} - -To print a feature structure such as: -\begin{flushleft} -%\fs{\it case:nom \\ \it person:P} -\fs{case:nom} -\end{flushleft} -you can type: -\begin{verbatim} -\fs{case:nom \\ person:P} -\end{verbatim} - -The feature structure can appear anywhere --- in continuous text, in a -displayed environment such as {\tt flushleft}, or inside a -phrase--structure rule, or even inside another feature structure. - -To put a category label at the top of the feature structure, like this, -\begin{flushleft} -\lfs{N}{case:nom \\ person:P} -\end{flushleft} -here's what you type: -\begin{verbatim} -\lfs{N}{case:nom \\ person:P} -\end{verbatim} -And here is an example of a PS--rule made of labeled feature structures: -\begin{flushleft} -\psr{\lfs{S}{tense:T}} - {\lfs{NP}{case:nom \\ number:N} - \lfs{VP}{tense:T \\ number:N} } -\end{flushleft} -which was of course typed as: -\begin{verbatim} -\psr{\lfs{S}{tense:T}} - {\lfs{NP}{case:nom \\ number:N} - \lfs{VP}{tense:T \\ number:N} } -\end{verbatim} - - -\section{Discourse representation structures} - -Several macros in {\tt covington.sty} facilitate display of discourse -repsesentation structures (DRSes) in the box notation originally used by -Hans Kamp. The simplest is \verb"\drs", which takes two arguments: -a list of discourse variables joined by \verb"~", and a list of DRS -conditions separated by \verb"\\". Nesting is permitted. Note that the -\verb"\drs" macro itself does not give you a displayed environment; you -must use {\tt flushleft} or the like to display the DRS. -Here are some examples: -\begin{verbatim} -\drs{X}{donkey(X)\\green(X)} -\end{verbatim} -\begin{flushleft} -\drs{X}{donkey(X)\\green(X)} -\end{flushleft} -\begin{verbatim} -\drs{X} -{named(X,`Pedro') \\ -\drs{Y}{donkey(Y)\\owns(X,Y)}~~ - {\large $\Rightarrow$}~ - \drs{~}{feeds(X,Y)} -} -\end{verbatim} -\begin{flushleft} -\drs{X} -{named(X,`Pedro') \\ -\drs{Y}{donkey(Y)\\owns(X,Y)}~~ - {\large $\Rightarrow$}~ - \drs{~}{feeds(X,Y)} -} -\end{flushleft} -To display a sentence above the DRS, use \verb"\sdrs", like this: -\begin{verbatim} -\sdrs{A donkey is green.}{X}{donkey(X)\\green(X)} -\end{verbatim} -\begin{flushleft} -\sdrs{A donkey is green.}{X}{donkey(X)\\green(X)} -\end{flushleft} -Some DRS connectives are also provided (normally for forming -DRSes that are to be nested within other DRSes). -The macro \verb"\negdrs" forms a DRS preceded by a negation symbol: -\begin{verbatim} -\negdrs{X}{donkey(X)\\green(X)} -\end{verbatim} -\begin{flushleft} -\negdrs{X}{donkey(X)\\green(X)} -\end{flushleft} -Finally, \verb"\ifdrs" forms a pair of DRSes joined by a big arrow, -like this: -\begin{verbatim} -\ifdrs{X}{donkey(X)\\hungry(X)} - {~}{feeds(Pedro,X)} -\end{verbatim} -\begin{flushleft} -\ifdrs{X}{donkey(X)\\hungry(X)} - {~}{feeds(Pedro,X)} -\end{flushleft} -If you have an ``if''--structure appearing among ordinary predicates -inside a DRS, you may prefer to use \verb"\alifdrs", which is just like -\verb"\ifdrs" but shifted slightly to the left for better alignment. - -\section{Exercises} - -The {\tt exercise} environment generates an exercise numbered according -to chapter, section, and subsection (suitable for use in a large book; -in this example, the subsection number is going to come out as 0). -\begin{exercise}[Project] -Prove that the above assertion is true. -\end{exercise} -This was typed as -\begin{verbatim} -\begin{exercise}[Project] -Prove that the above assertion is true. -\end{exercise} -\end{verbatim} -and the argument \verb"[Project]" is optional (actually, any word could -go there). - -\section{Reference Lists} - -To type an LSA--style hanging--indented reference list, use the {\tt -reflist} environment. ({\em Note:\/} {\tt reflist} is not presently -integrated with Bib\TeX\ in any way.) For example, -\begin{verbatim} -\begin{reflist} -Barton, G. Edward; Berwick, Robert C.; and Ristad, Eric Sven. 1987. -Computational complexity and natural language. Cambridge, -Massachusetts: MIT Press. - -Chomsky, Noam. 1965. Aspects of the theory of syntax. Cambridge, -Massachusetts: MIT Press. - -Covington, Michael. 1993. Natural language processing for Prolog -programmers. Englewood Cliffs, New Jersey: Prentice--Hall. -\end{reflist} -\end{verbatim} -prints as: -\begin{reflist} -Barton, G. Edward; Berwick, Robert C.; and Ristad, Eric Sven. 1987. -Computational complexity and natural language. Cambridge, -Massachusetts: MIT Press. - -Chomsky, Noam. 1965. Aspects of the theory of syntax. Cambridge, -Massachusetts: MIT Press. - -Covington, Michael A. 1993. Natural--language processing for Prolog -programmers. Englewood Cliffs, New Jersey: Prentice--Hall. -\end{reflist} -Notice that within the reference list, ``French spacing'' is in effect ---- that is, spaces after periods are no wider than normal spaces. Thus -you do not have to do anything special to avoid excessive space after -people's initials. - - -\section{Displayed sentences} - -The macro \verb"\sentence" displays an italicized sentence (it is a -combination of {\tt flushleft} and \verb"\em"). If you type -\begin{verbatim} -\sentence{This is a sentence.} -\end{verbatim} -you get: -\sentence{This is a sentence.} - - -\section{Big curly brackets (disjunctions)} - -Last of all, the 2--argument macro \verb"\either" expresses alternatives -within a sentence or PS--rule: -\begin{flushleft} -\verb"the \either{big}{large} dog" $=$ the \either{big}{large} dog \\ -\end{flushleft} -\begin{flushleft} -\verb"\psr{A}{B~\either{C}{D}~E} " $=$ \psr{A}{B~\either{C}{D}~E} -\end{flushleft} - -That's all there is. -Suggestions for improving {\tt covington.sty} are welcome, and bug -reports are actively solicited. Please note, however, that this is free -software, and the author makes no commitment to do any further work on -it. - -\end{document} - Files old/doc/latex/covington/covingtonGerm.pdf and new/doc/latex/covington/covingtonGerm.pdf differ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/covington/covingtonGerm.tex new/doc/latex/covington/covingtonGerm.tex --- old/doc/latex/covington/covingtonGerm.tex 2010-04-08 00:55:02.000000000 +0200 +++ new/doc/latex/covington/covingtonGerm.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,491 +0,0 @@ -% File: covington.tex (in LaTeX2e) -% Documentation in German for covington.sty - -\documentclass{article} -\usepackage[ngerman]{babel} -\usepackage[latin1]{inputenc} -\setlength{\parindent}{0pt} -\setlength{\parskip}{1ex plus 0.2ex minus 0.1ex} -\usepackage{covington} -\title{\bf Linguistisch editieren mit {\tt covington.sty}} -\author{Michael A. Covington\footnote{Deutsche ?bersetzung von Robert Galow -(Friedrich-Schiller-Universit?t Jena).}\\ - \small Artificial Intelligence Center \\ - \small The University of Georgia \\ - \small Athens, Georgia 30602 \sc u.s.a.\\ - mcovingt@ai.uga.edu\\ - http://www.ai.uga.edu/$\sim$mc} - -\date{29.03.2007} - - -\begin{document} -\maketitle -{\footnotesize \tableofcontents} -\typeout{Run LaTeX twice to get a correct table of contents.} - -\section*{Neues in dieser Version} -\begin{itemize} -\item Merkmalsstrukturen erfordern nicht l?nger den Befehl \verb"\it", um kursive Schrift anzeigen zu lassen. -\item Die vorliegende Dokumentation wurde f?r \LaTeXe\ Benutzer redigiert. -\end{itemize} - -\section*{Neues in ?lteren Versionen} -\begin{itemize} -\item Mehrere Akzente ?ber einem einzigen Graphem (Bsp.: \emph{\acm{a}}) werden unterst?tzt. -\item Dieses Paket wurde in {\tt covington} (mit \textit{o}) umbenannt und ist sowohl mit \LaTeXe\ und NFSS -als auch \LaTeX\ 2.09. kompatibel. -\item Die vertikale Anordnung beschrifteter Merkmalsstrukturen wurde derart ver?ndert, dass die -Kategoriebezeichnungen nun unabh?ngig von der Gr??e der Strukturdarstellung angeordnet werden. -\end{itemize} - -\section*{Einf?hrung} -Die Datei {\tt covington.tex} ist die Dokumentation der Version {\tt covington.sty} vom M?rz 2001. -Mit dieser \LaTeX\ Style-Option wird es nun m?glich spezielle und f?r die Linguistik typische Anmerkungen -sowie Strukturen darzustellen. - -{\footnotesize -In em\TeX\ unter MS-DOS finden Sie {\tt covington.sty} mit der Bezeichnung {\tt covingto.sty}. -Das fehlende $n$ hat keinerlei Auswirkungen.} - -Um {\tt covington.sty} nutzen zu k?nnen, sollten Sie entweder ?ber eine Kopie in ihrem aktuellen Ordner oder im \LaTeX\- Verzeichnis verf?gen, in dem ihre \LaTeX\ Style-Files gespeichert werden. - -Unter \LaTeXe\ -f?gen Sie nach \verb"\documentclass" -den Befehl\\ \verb"\usepackage{covington}" hinzu. - -{\footnotesize -Bei \LaTeX\ 2.09 f?gen Sie {\tt covington} unmittelbar in den \verb"\documentstyle" Befehl mit ein. -Das Ergebnis: \hfill\\ -{\tt -\verb"\documentstyle[12pt,"\underline{covington}\verb"]{article}" -}\hfill\\ -Beachten Sie die richtige Schreibweise {\tt covington} (9 Buchstaben). -} - -F?r diese Dokumentation wird vorausgesetzt, dass Sie wissen, wie Sie korrekt mit \LaTeX\ umgehen und dass -Sie ?ber eine \LaTeX-Anleitung verf?gen. {\tt covington.sty} bietet Ihnen keine speziellen Fonts -oder Grapheme, kann jedoch mit anderen passenden Stildateien verwendet werden. - -Falls Sie {\tt covington.sty} und {\tt uga.sty} (UGa thesis style) -zusammen nutzen, sollten Sie {\tt uga} vor {\tt covington} erw?hnen. - - -\section{Akzente} - -\LaTeX\ bietet eine gro?z?gige Auswahl von Akzenten, die ?ber jedem beliebigen Graphem platziert werden -k?nnen. -Beispiele: -\begin{flushleft} -\`{x} \'{x} \^{x} \"{x} \~{x} \={x} \H{x} \t{xx} \c{x} \d{x} \b{x} -\end{flushleft} -Die Eingabe erfolgt so: -\begin{verbatim} -\`{x} \'{x} \^{x} \"{x} \~{x} \={x} \H{x} \t{xx} \c{x} \d{x} \b{x} -\end{verbatim} - -\LaTeX\ erm?glicht nat?rlich auch diese Grapheme: -\begin{flushleft}\obeyspaces -\i \j \ae \AE \oe \OE \aa \AA \o \O \l \L \ss ?` !` -\end{flushleft} -Die Eingabe daf?r: -\begin{verbatim} -\i \j \ae \AE \oe \OE \aa \AA \o \O \l \L \ss ?` !` -\end{verbatim} - -\LaTeX\ bietet leider keine bequeme M?glichkeit zwei Akzente ?ber dem selben -Graphem zu realisieren. Abhilfe schafft hier {\tt covington.sty} mit den folgenden -Makros: -\begin{flushleft} -\verb,\twoacc[...|...], \quad um 2 beliebige Akzente zu kombinieren. Bsp.: - \verb.\twoacc[\~|\={a}]. = \twoacc[\~|\={a}]\\[6pt] -\verb,\acm{...}, \quad f?r einen Akut ?ber dem L?ngsstrich,Bsp.: \verb.\acm{a}. = \acm{a}\\ -\verb,\grm{...}, \quad f?r einen Gravis ?ber dem L?ngsstrich, Bsp.: \verb.\grm{a}. = \grm{a}\\ -\verb,\cim{...}, \quad f?r Zirkumflex ?ber dem L?ngsstrich, Bsp.: \verb.\cim{a}. = \cim{a} -\end{flushleft} -Der erste der obigen Beispiele ist der allgemeine Fall, die anderen drei sind spezielle. Diese -entstehen oft beim Transkribieren aus dem Griechischen. Nun k?nnen sie mit beiden Akzenten an selber Stelle -\emph{Koin\acm{e}} schreiben. - -Beachten sie die spezielle Syntax von \verb.\twoacc. --- dessen Argumente werden in eckigen, aber nicht -geschwungenen Klammern gefasst. Die Argumente werden durch \verb.|. getrennt. -Das erste Argument ist der obere Akzent (nur), das zweite das Graphem mit dem niedrigen Akzent. - -Bitte beachten Sie, dass Akzente nicht in der {\tt tabbing} Umgebung funktionieren. -Nutzen Sie {\tt tabular} oder ihre \LaTeX\ Anleitung f?r L?sungsvorschl?ge. - -\section{Makros f?r nummerierte Satzbeispiele} - -Linguistische Aufs?tze beinhalten oft nummerierte Beispiele. -Das Makro \verb"\exampleno" generiert eine neue Beispielnummer und kann an beliebiger Stelle genutzt werden. -Um beispielsweise einen Satz mit einer rechtsb?ndigen Beispielnummer zu erhalten, geben Sie ein: -\begin{verbatim} -\begin{flushleft} -Das ist ein Satz. \hfill (\exampleno) -\end{flushleft} -\end{verbatim} -Das Resultat sieht so aus: -\begin{flushleft} -Das ist ein Satz. \hfill (\exampleno) -\end{flushleft} -Der Beispielz?hler funktioniert im Prinzip wie die \LaTeX-Nummerierung von Gleichungen. -Sollten Sie also Gleichungen UND nummerierte Beispiele im selben Dokument nutzen, -erhalten Sie eine fortlaufende Nummerierung von Beispielen. Um auf die -Nummer zuzugreifen, ohne sie zu ?ndern, nutzen Sie \verb"\theequation". - -Sie k?nnen auch \verb"\label" und \verb"\ref" jeweils f?r Beispielnummern als auch f?r -die Gleichungsnummerierung nutzen. Sehen Sie dazu in Ihren \LaTeX\ Unterlagen nach. -Die dargestellte Situation trifft auch f?r die {\tt example} und {\tt examples} -Umgebungen zu, die als n?chstes beschrieben werden sollen, aber auch f?r \verb"\exampleno" selbst. - -\section{Nummerierte Beispiele mit der {\tt example}-Umgebung} - -Die {\tt example}-Umgebung stellt ein einziges Beispiel mit einer linksb?ndig -generierten Beispielnummer dar. - -Wenn Sie Nachfolgendes eingeben, -\begin{verbatim} -\begin{example} -This is a sentence. -\end{example} -\end{verbatim} -erhalten Sie als Resultat: -\begin{example} -Das ist ein Beispiel. -\end{example} -Die {\tt example}-Umgebung ?hnelt stark {\tt flushleft}. Dabei kann das Beispiel -beliebiger L?nge sein und sowohl mehreren Zeilen (getrennt durch \verb"\\") -oder sogar ganzen Abs?tzen bestehen. - -Eine M?glichkeit innerhalb untergeordneter Beispiele zu nummerieren, bietet {\tt itemize} oder {\tt -enumerate}. - -Beispiel: -\begin{verbatim} -\begin{example} -\begin{itemize} -\item[(a)] Das ist der erste Satz. -\item[(b)] Das ist der zweite Satz. -\end{itemize} -\end{example} -\end{verbatim} -Das Resultat: -\begin{example} -\begin{itemize} -\item[(a)] Das ist der erste Satz. -\item[(b)] Das ist der zweite Satz. -\end{itemize} -\end{example} -Die im n?chsten Punkt beschriebene {\tt examples}-Umgebung ist ?blicher. - -\section{Nummerierte Beispiele mit der {\tt examples}-Umgebung} - -Um mehrere Beispiele mit jeweiliger Nummerierung zusammen anzeigen zu lassen, -nutzen Sie {\tt examples} anstelle von {\tt example}. Der einzige Unterschied besteht darin, -dass mehrere Beispiele angezeigt werden k?nnen, implementiert mit \verb"\item". - -Ein Beispiel: -\begin{verbatim} -\begin{examples} -\item Das ist der erste Satz. -\item Das ist der zweite Satz. -\end{examples} -\end{verbatim} -Das Resultat: -\begin{examples} -\item Das ist der erste Satz. -\item Das ist der zweite Satz. -\end{examples} - - -\section{S?tze glossieren und interlineares ?bersetzen} - -Einen Satz zu glossieren meint, ihn Lexem f?r Lexem zu "`erl?utern"'. In der Regel werden bei -interlinearen ?bersetzungen zun?chst S?tze der Ausgangssprache Wort f?r Wort, also unter Verzicht auf -syntaktisch-grammatikalische Regeln, in vertikaler Anordnung ?bersetzt. Danach folgt die philologische -?bersetzung, die Lexeme nach syntaktischen und grammatischen Regeln der Zielsprache gliedert, -Satzglieder also korrekt anordnet. - -Ein Beispiel:% -\footnote{Die Makros zum Umgang mit Glossen wurden mit Erlaubnis von Marcel R. van der Goot von {\tt gloss.tex} angepasst.} -\gll Dit is een Nederlands voorbeeld. - Das ist ein niederl?ndisches Beispiel. -\glt `Das ist ein Beispiel auf Niederl?ndisch.' -\glend -Dieses spezielle Beispiel wird so eingegeben: -\begin{verbatim} -\gll Dit is een Nederlands voorbeeld. - Das ist ein niederl?ndisches Beispiel. -\glt `Das ist ein Beispiel auf Niederl?ndisch.' -\glend -\end{verbatim} -Da \TeX\ Lexeme z?hlt, m?ssen Sie diese nicht in einer Zeile entsprechend ihrer Anzahl ordnen. Wenn also -Lexeme von Ausgangs- und Zielsprache nicht korrespondieren, k?nnen Sie zur Veranschaulichung der -intendierten Reihenfolge geschweifte Klammern nutzen. -M?chten Sie beispielsweise folgende S?tze darstellen -\gll Dit is een voorbeeldje in het Nederlands. - Das ist ein {kleines Beispiel} auf {} Niederl?ndisch. -\glt `Das ist ein kleines Beispiel auf Niederl?ndisch.' -\glend -schreiben Sie: -\begin{verbatim} -\gll Dit is een voorbeeldje in het Nederlands. - Das ist ein {kleines Beispiel} auf {} Niederl?ndisch. -\glt `Das ist ein kleines Beispiel auf Niederl?ndisch.' -\glend -\end{verbatim} -Insgesamt bietet Ihnen {\tt covington.sty} f?nf Makros zum Umgang mit Glossen: -\begin{itemize} -\item \verb"\gll" stellt zwei Zeilen vertikal zueinander angeordneter W?rter dar. Die damit verbundene -Umgebung ?hnelt {\tt flushleft}. -\item \verb"\glll" entspricht \verb"gll", nur gibt es -{\em drei} Zeilen angeordneter W?rter (N?tzlich f?r Zitate, Morphologisches, -und ?bersetzungen). -\item \verb"\glt" beendet Zeilen mit aufeinander angeordneter W?rter und f?hrt eine Zeile -(oder mehr) mit der ?bersetzung auf. -\item \verb"\gln" entspricht \verb"\glt" , beginnt aber keine neue Zeile -(n?tzlich, wenn keine ?bersetzung folgt, daf?r aber eine rechtsb?ndige Beispielnummerierung). -\item \verb"\glend" beendet die \verb"\gll" Umgebung. -\end{itemize} -Hier sind weitere Beispiele. Erstens, einen Satz mit drei Zeilen in vertikaler Anordnung: -\glll Hoc est aliud exemplum. - n.sg.nom 3.sg n.sg.nom n.sg.nom - Das ist ein anderes Beispiel. -\glt `Das ist ein anderes Beispiel.' -\glend -Die Eingabe muss sein: -\begin{verbatim} -\glll Hoc est aliud exemplum. - n.sg.nom 3.sg n.sg.nom n.sg.nom - Das ist ein anderes Beispiel. -\glt `Das ist ein anderes Beispiel.' -\glend -\end{verbatim} -Jetzt ein Beispiel mit einer Glosse ohne philologische ?bersetzung. Auf der rechten Seite setzen wir -au?erdem eine Beispielnummer: -\gll Hoc habet numerum. - Das hat Nummer. -\gln \hfill (\exampleno) -\glend -Die Eingabe muss sein: -\begin{verbatim} -\gll Hoc habet numerum. - Das hat Nummer -\gln \hfill (\exampleno) -\glend -\end{verbatim} -Hier noch eine sehr g?ngige Methode: Wir f?gen einen glossierten Satz in die {\tt example} -Umgebung ein: -\begin{example} -\gll Hoc habet numerum praepositum. - Das hat Nummer davor -\glt `Dieses hat eine Nummer davor.' -\glend -\end{example} -Die Eingabe muss sein: -\begin{verbatim} -\begin{example} -\gll Hoc habet numerum praepositum. - Das hat Nummer davor -\glt `Dieses hat eine Nummer davor.' -\glend -\end{example} -\end{verbatim} -Bitte merken Sie sich, dass jeder glossierte Satz entweder mit \verb"\gll" oder -\verb"\glll" beginnt, dann entweder \verb"\glt" oder \verb"\gln" enth?lt, und schlie?lich mit -\verb"\glend" endet. Das Layout im Arbeitsschritt vor -\verb"\glt" oder \verb"\gln" ist an feste Kriterien gebunden, danach aber wesentlich freier gestaltbar. - -\section{Satzstruktur-Regeln darstellen} - -Um die Satzstruktur-Regel \psr{S}{NP~VP} darzustellen, k?nnen Sie -\verb"\psr{S}{NP~VP}" eingeben. -Das gilt nat?rlich auch f?r alle anderen Satzstruktur-Regeln. - -\section{Repr?sentation von Merkmalsstrukturen} - -Um eine Merkmalsstrukur wie die nachfolgende zu erhalten, -\begin{flushleft} -%\fs{\it Kasus:nom \\ \it Persona:P} -\fs{Kasus:nom} -\end{flushleft} -k?nnen Sie eingeben: -\begin{verbatim} -\fs{Kasus:nom \\ Persona:P} -\end{verbatim} - -Merkmalstrukturen k?nnen ?berall integriert werden -- in Flie?texte, in spezielle -Umgebungen wie {\tt flushleft}, in den Zusammenhang syntaktischer Regeln oder -sogar in andere Merkmalstrukturen. - -Um Kategorienamen einer Merkmalstruktur ?ber diesselbe zu setzen, wie in -dem nachfolgenden Beispiel zu sehen ist, -\begin{flushleft} -\lfs{N}{Kasus:nom \\ Persona:P} -\end{flushleft} -geben Sie Folgendes ein: -\begin{verbatim} -\lfs{N}{Kasus:nom \\ Persona:P} -\end{verbatim} -Hier noch ein Beispiel f?r eine Satzstrukturdarstellung mit Kategoriebezeichnung ?ber der jeweiligen -Merkmalsstruktur: -\begin{flushleft} -\psr{\lfs{S}{Tempus:T}} - {\lfs{NP}{Kasus:nom \\ Nummerus:N} - \lfs{VP}{Tempus:T \\ Nummerus:N}} -\end{flushleft} -Die Eingabe daf?r ist: -\begin{verbatim} -\psr{\lfs{S}{Tempus:T}} - {\lfs{NP}{Kasus:nom \\ Nummerus:N} - \lfs{VP}{Tempus:T \\ Nummerus:N}} -\end{verbatim} - - -\section{Discourse Representation Structures nach H.Kamp setzen} - -Verschiedene Makros in {\tt covington.sty} erleichtern Diskurs Structures -(Kurz DRS von \emph{Discourse representation structure}. Wir wollen uns im -Folgenden auf die Verwendung -dieser g?ngigen Abk?rzung festlegen). Konkret sind die K?stchen-Bezeichnungen von Hans Kamp gemeint. -Das einfachste Makro ist \verb"\drs", welches zwei Argumente verlangt: -Ein Verzeichnis der Diskursvariablen verbunden mit \verb"~", und ein -Verzeichnis von DRS-Bedingungen -getrennt durch \verb"\\". Verschachtelung ist dabei erlaubt. Beachten Sie jedoch, dass Ihnen das -\verb"\drs" Makro an sich keine entfaltete Umgebung bietet. Sie m?ssen {\tt -flushleft} oder ?hnliches nutzen, -um eine DRS anzeigen zu lassen. -Hier sind einige Beispiele: -\begin{verbatim} -\drs{X}{Esel(X)\\gr?n(X)} -\end{verbatim} -\begin{flushleft} -\drs{X}{Esel(X)\\gr?n(X)} -\end{flushleft} -\begin{verbatim} -\drs{X} -{named(X,`Pedro') \\ -\drs{Y}{Esel(Y)\\besitzt(X,Y)}~~ - {\large $\Rightarrow$}~ - \drs{~}{f?ttert(X,Y)} -} -\end{verbatim} -\begin{flushleft} -\drs{X} -{named(X,`Pedro') \\ -\drs{Y}{Esel(Y)\\besitzt(X,Y)}~~ - {\large $\Rightarrow$}~ - \drs{~}{f?ttert(X,Y)} -} -\end{flushleft} -Um einen Satz oberhalb der DRS-Box zu platzieren, verwenden Sie \verb"\sdrs" wie im n?chsten Beispiel: -\begin{verbatim} -\sdrs{Ein Esel ist gr?n.}{X}{Esel(X)\\gr?n(X)} -\end{verbatim} -\begin{flushleft} -\sdrs{Ein Esel ist gr?n.}{X}{Esel(X)\\gr?n(X)} -\end{flushleft} -Au?erdem werden Ihnen DRS-Verbindungen angeboten, die normalerweise zur Repr?sentation von einer DRS in -einer anderen vorgesehen sind. -Das Makro \verb"\negdrs" generiert eine DRS, vor der ein Negationssymbol steht: -\begin{verbatim} -\negdrs{X}{Esel(X)\\gr?n(X)} -\end{verbatim} -\begin{flushleft} -\negdrs{X}{Esel(X)\\gr?n(X)} -\end{flushleft} -Als letztes ist \verb"\ifdrs" zu erw?hnen. Dabei handelt es sich um die Verbindung zweier DRS durch einen -gro?en Pfeil. -Beispiel: -\begin{verbatim} -\ifdrs{X}{Esel(X)\\hungrig(X)} - {~}{f?ttert(Pedro,X)} -\end{verbatim} -\begin{flushleft} -\ifdrs{X}{Esel(X)\\hungrig(X)} - {~}{f?ttert(Pedro,X)} -\end{flushleft} -Bei Verbindungen von gew?hnlichen Pr?dikaten und Konditionals?tzen innerhalb -einer DRS ist die Benutzung von \verb"\alifdrs" zu empfehlen. \verb"\alifdrs" ist -\verb"\ifdrs" sehr ?hnlich, wird aber zwecks besserer Anordnung etwas weiter nach links ger?ckt. - -\section{?bungsbeispiele} - -Die {\tt exercise}-Umgebung generiert eine nach Kapitel, Absatz und -Unterabschnitt nummerierte ?bung. Diese Option eignet sich beispielsweise f?r in B?chern auftretende ?bungen. -Im folgenden Beispiel wird der Unterabschnitt als 0 angezeigt: -\begin{exercise}[Projekt] -Beweisen Sie die Richtigkeit der oben gestellten Hypothese. -\end{exercise} -Die notwendige Eingabe: -\begin{verbatim} -\begin{exercise}[Projekt] -Beweisen Sie die Richtigkeit der oben gestellten Hypothese. -\end{exercise} -\end{verbatim} -Das Argument \verb"[Projekt]" kann optional verwendet werden und ist durch jedes beliebige Lexem ersetzbar. - -\section{Literaturverweise nach LSA-Muster} - -Um Bibliographien im LSA-Stil zu verfassen, nutzen Sie bitte die {\tt -reflist}-Umgebung. ({\em Anmerkung:\/} {\tt reflist} ist derzeit noch nicht -in Bib\TeX\ integriert.) Beispielsweise sehen die kommenden Nachweise in der Ausgabe wie folgt aus: - -\begin{verbatim} -\begin{reflist} -Barton, G. Edward; Berwick, Robert C.; and Ristad, Eric Sven. 1987. -Computational complexity and natural language. Cambridge, -Massachusetts: MIT Press. - -Chomsky, Noam. 1965. Aspects of the theory of syntax. Cambridge, -Massachusetts: MIT Press. - -Covington, Michael. 1993. Natural language processing for Prolog -programmers. Englewood Cliffs, New Jersey: Prentice--Hall. -\end{reflist} -\end{verbatim} -\begin{reflist} -Barton, G. Edward; Berwick, Robert C.; and Ristad, Eric Sven. 1987. -Computational complexity and natural language. Cambridge, -Massachusetts: MIT Press. - -Chomsky, Noam. 1965. Aspects of the theory of syntax. Cambridge, -Massachusetts: MIT Press. - -Covington, Michael A. 1993. Natural language processing for Prolog -programmers. Englewood Cliffs, New Jersey: Prentice--Hall. -\end{reflist} -Beachten Sie, dass innerhalb dieser Bibliographien ``French spacing'' angewandt wird. -Das bedeutet: Die Leerstellen nach Punkten sind nicht gr??er als das konventionelle Leerzeichen. Sie m?ssen -also nichts gegen ?bergro?e Abst?nde nach Namen unternehmen. - - -\section{Das Makro {\tt sentence}} - -Das Makro \verb"\sentence" hilft bei der Ausgabe von kursiven S?tzen, und ist eine -Kombination von {\tt flushleft} und \verb"\em"). Bei der Eingabe von -\begin{verbatim} -\sentence{Das ist ein Satz.} -\end{verbatim} -ist das Resultat: -\sentence{Das ist ein Satz.} - - -\section{Geschwungene Klammern und Disjunktionen mit {\tt either}} - -Zu guter Letzt: Das 2-Argumente-Makro \verb"\either" repr?sentiert Alternativen -innerhalb eines Satzes oder einer Satzstruktur: -\begin{flushleft} -\verb"the \either{schwer}{gro?e} dog" $=$ the \either{schwer}{gro?} dog \\ -\end{flushleft} -\begin{flushleft} -\verb"\psr{A}{B~\either{C}{D}~E} " $=$ \psr{A}{B~\either{C}{D}~E} -\end{flushleft} - -Mehr gibt es nicht zu sagen. -Vorschl?ge zur Verbesserung von {\tt covington.sty} sind willkommen und auf Bug-Reports wird gern -eingegangen. Bitte beachten Sie, dass es sich um kostenlose Software handelt und der Autor nicht zu -weiterer Arbeit an der Software verpflichtet ist. - -\end{document} - diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/tlpkg/tlpobj/beton.doc.tlpobj new/tlpkg/tlpobj/beton.doc.tlpobj --- old/tlpkg/tlpobj/beton.doc.tlpobj 1970-01-01 01:00:00.000000000 +0100 +++ new/tlpkg/tlpobj/beton.doc.tlpobj 2010-06-10 18:17:07.000000000 +0200 @@ -0,0 +1,8 @@ +name beton.doc +category Package +revision 15878 +shortdesc doc files of beton +relocated 1 +docfiles size=27 + RELOC/doc/latex/beton/beton.pdf + RELOC/doc/latex/beton/legal.txt diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/tlpkg/tlpobj/covington.doc.tlpobj new/tlpkg/tlpobj/covington.doc.tlpobj --- old/tlpkg/tlpobj/covington.doc.tlpobj 2010-06-10 18:24:34.000000000 +0200 +++ new/tlpkg/tlpobj/covington.doc.tlpobj 1970-01-01 01:00:00.000000000 +0100 @@ -1,10 +0,0 @@ -name covington.doc -category Package -revision 17750 -shortdesc doc files of covington -relocated 1 -docfiles size=119 - RELOC/doc/latex/covington/covington.pdf - RELOC/doc/latex/covington/covington.tex - RELOC/doc/latex/covington/covingtonGerm.pdf - RELOC/doc/latex/covington/covingtonGerm.tex ++++++ covington.tar.xz -> beton.tar.xz ++++++ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/tex/latex/beton/beton.sty new/tex/latex/beton/beton.sty --- old/tex/latex/beton/beton.sty 1970-01-01 01:00:00.000000000 +0100 +++ new/tex/latex/beton/beton.sty 2006-01-13 00:52:08.000000000 +0100 @@ -0,0 +1,73 @@ +%% +%% This is file `beton.sty', +%% generated with the docstrip utility. +%% +%% The original source files were: +%% +%% beton.dtx (with options: `package') +%% +%% File `beton.dtx'. +%% Copyright (C) 1992--1995 Frank Jensen. All rights reserved. + +\def\fileversion{v1.3} +\def\filedate{1995/03/05} + +%% \CharacterTable +%% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z +%% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z +%% Digits \0\1\2\3\4\5\6\7\8\9 +%% Exclamation \! Double quote \" Hash (number) \# +%% Dollar \$ Percent \% Ampersand \& +%% Acute accent \' Left paren \( Right paren \) +%% Asterisk \* Plus \+ Comma \, +%% Minus \- Point \. Solidus \/ +%% Colon \: Semicolon \; Less than \< +%% Equals \= Greater than \> Question mark \? +%% Commercial at \@ Left bracket \[ Backslash \\ +%% Right bracket \] Circumflex \^ Underscore \_ +%% Grave accent \` Left brace \{ Vertical bar \| +%% Right brace \} Tilde \~} +\NeedsTeXFormat{LaTeX2e}[1994/12/01] +\ProvidesPackage{beton}[\filedate\space\fileversion] +\typeout{Package: `beton' \fileversion\space <\filedate> (FJ)} +\def\rmdefault{ccr} +\def\beton@baselineskip@table + {<\@viiipt>10<\@ixpt>11.5<\@xpt>13<\@xipt>14.5<\@xiipt>16} +\def\beton@new@setfontsize#1#2#3% + {\edef\@tempa{\def\noexpand\@tempb####1<#2}% + \@tempa>##2<##3\@nil{\def\beton@baselineskip@value{##2}}% + \edef\@tempa{\noexpand\@tempb\beton@baselineskip@table<#2}% + \@tempa><\@nil + \ifx\beton@baselineskip@value\@empty + \def\beton@baselineskip@value{#3}% + \fi + \beton@old@setfontsize{#1}{#2}\beton@baselineskip@value} +\AtBeginDocument + {\let\beton@old@setfontsize=\@setfontsize + \let\@setfontsize=\beton@new@setfontsize} +\DeclareOption{standard-baselineskips} + {\AtBeginDocument{\let\@setfontsize=\beton@old@setfontsize}} +\DeclareOption{oldstyle-equation-numbers} + {\@ifundefined{chapter} + {\def\theequation{{\beton@oldstyle\arabic{equation}}}} + {\def\theequation{{\beton@oldstyle\thechapter}.% + {\beton@oldstyle\arabic{equation}}}}} +\DeclareRobustCommand\beton@oldstyle{\usefont{OML}{ccm}\f@series{it}} +\DeclareRobustCommand\oldstylenums[1]% + {\begingroup + \spaceskip\fontdimen\tw@\font + \TextOldstyle \MathOldstyle #1% + \endgroup} +\let\TextOldstyle=\beton@oldstyle +\providecommand\MathOldstyle{\mathgroup\symletters} +\DeclareOption{concrete-math} + {\DeclareSymbolFont{operators}{OT1}{ccr}{m}{n}% + \DeclareSymbolFont{letters}{OML}{ccm}{m}{it}} +\def\dash---{\thinspace---\hskip.16667em\relax} +\def\qback{\kern-.15em} % between , or . and '' +\def\t#1{{\edef\next{\the\font}\beton@oldstyle\accent"7F\next#1}} +\ProcessOptions +\AtBeginDocument{\normalsize} +\endinput +%% +%% End of file `beton.sty'. diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/tex/latex/covington/covington.sty new/tex/latex/covington/covington.sty --- old/tex/latex/covington/covington.sty 2006-01-13 00:53:39.000000000 +0100 +++ new/tex/latex/covington/covington.sty 1970-01-01 01:00:00.000000000 +0100 @@ -1,509 +0,0 @@ -%%% File covington.sty -%%% -%%% Michael A. Covington -%%% Artificial Intelligence Programs -%%% The University of Georgia -%%% Athens, Georgia 30602-7415 USA -%%% mcovingt@aisun1.ai.uga.edu -%%% -%%% You may copy and distribute this file freely. -%%% (If you modify it, please change its name and add your own comments.) -%%% -%%% See covington.tex for documentation. - -\typeout{* covington.sty : Covington's linguistic macros, 2001 March 27 *} - -%%% -%%% Preferences about how text is laid out -%%% - -\renewcommand{\textfloatsep}{0.7in} -\raggedbottom - -%%% -%%% Stacked accents -%%% - -% This is adapted from the \diatop macro in wsuipa.sty, which was -% originally designed by Jean-Pierre Paillet. - -\def\twoacc[#1|#2]{\leavevmode{\setbox1=\hbox{{#1{}}}% - \setbox2=\hbox{{#2{}}}% - \dimen0=\ifdim\wd1>\wd2\wd1\else\wd2\fi% - \dimen1=\ht2\advance\dimen1by-0.8ex% - \setbox1=\hbox to1\dimen0{\hss#1\hss}% - \rlap{\raise1\dimen1\box1}% - \hbox to1\dimen0{\hss#2\hss}}}% - -% Example of usage: \twoacc[\^|\={a}] -% Special cases: - -\def\acm#1{\twoacc[\'|\={#1}]} % acute over macron -\def\grm#1{\twoacc[\`|\={#1}]} % grave over macron -\def\cim#1{\twoacc[\^|\={#1}]} % circumflex over macron - -%%% -%%% Example numbering -%%% - -% Example numbering uses the same counter as LaTeX's equation numbering. -% Thus, you can use \label and \ref to refer to numbered examples in -% exactly the same way as with equations. - -% \exampleno increments the counter and gives you its current value. -% You can use it anywhere to generate an example number. -% -% For example, to display a sentence with a number at the -% right margin, do this: -% -% \begin{flushleft} -% This is a sentence. \hfill (\exampleno) -% \end{flushleft} - -\newcommand{\exampleno}{\refstepcounter{equation}\theequation} - -%%% -%%% The 'example' environment -%%% - -% example is an environment for displaying a single numbered -% example, preceded by its number. Example of use: -% -% \begin{example} -% This is an example. -% \end{example} -% -% This is actually a special case of 'examples' where -% the first \item is automatically supplied. -% -% To display sub-examples with numbers such as -% (3)(a), (3)(b), etc., you can use 'itemize', thus: -% \begin{example} -% \begin{itemize} -% \item[(a)] This is the first example. -% \item[(b)] This is the second example. -% \end{itemize} -% \end{example} - -\newenvironment{example}{\begin{examples}\item}{\end{examples}} - -%%% -%%% The 'examples' environment -%%% - -% examples is an environment for displaying a series of examples -% together, each with its own example number. Usage: -% -% \begin{examples} -% \item This is the first example. -% \item This is the second example. -% \end{examples} -% -% Thanks to Darrel Hankerson of Auburn University, and numerous others -% across the net, for help with this macro. - -\newcounter{equationsave} % used in trick with equation number - -\newenvironment{examples}% % define "example" environment -{% -\begin{list}{(\theequation)}% -{% -\setcounter{equationsave}{\arabic{equation}}% -\usecounter{equation}% % sets it to zero, unwantedly -\setcounter{equation}{\arabic{equationsave}}% % restores previous value -\setlength{\listparindent}{0pt}% -\def\makelabel##1{##1\hfil}% % put labels flushleft in space available -}% -\raggedright}% % text is flushleft, not justified -{\end{list}} - -%%% -%%% Sentences with word-by-word glosses -%%% - -% See covingtn.tex for full documentation. Some examples: -% -% Displayed sentence with gloss and translation: -% -% \gll Dit is een Nederlands voorbeeld. -% This is a Dutch example. -% \glt `This is an example in Dutch.' -% \glend -% -% Same, using bracketing where words do not correspond one-to-one: -% -% \gll Dit is een voorbeeldje in het Nederlands. -% This is a {little example} in {} Dutch. -% \glt `This is a little example in Dutch.' -% \glend -% -% Same, with example number added at right: -% -% \gll Dit is een voorbeeldje in het Nederlands. -% This is a {little example} in {} Dutch. -% \glt `This is a little example in Dutch.' \hfill (\exampleno) -% \glend -% -% Same, with number but no (line reserved for) translation: -% -% \gll Dit is een voorbeeldje in het Nederlands. -% This is a {little example} in {} Dutch. -% \gln \hfill (\exampleno) -% \glend -% -% If you want to align 3 lines rather than two, use \glll instead of \gll. -% -% Layout is critical between \gll (or \glll) and \glt (or \gln). -% After \glt, environment is essentially the same as 'flushleft'. -% -% Thanks to Marcel R. van der Goot for permission to reproduce code. -% -% Modified 1992 Nov 8 to force single spacing regardless of -% baselinestretch. - -\@ifundefined{new@fontshape}% - {\def\@selfnt{\ifx\@currsize\normalsize\@normalsize\else\@currsize\fi}} - {\def\@selfnt{\selectfont}} - % Thanks to Hans-Peter Kolb for this macro. - -\def\gll % Introduces 2-line text-and-gloss. - {\begin{flushleft} -\vskip\baselineskip% % Added 1992 Nov 8 to force single spacing -\def\baselinestretch{1}% -\@selfnt% -\vskip-\baselineskip% - \bgroup - \catcode`\^^M=12 - \twosent - } - -\def\glll % Introduces 3-line text-and-gloss. - {\begin{flushleft} -\vskip\baselineskip% % Added 1992 Nov 8 to force single spacing -\def\baselinestretch{1}% -\@selfnt% -\vskip-\baselineskip% - \bgroup - \catcode`\^^M=12 - \threesent - } - -\def\glt{{\hskip -\glossglue}\unhbox\gline\smallskip\newline} % \newline was \\ - % Introduces translation. - % Required even if no translation follows. - -\def\gln{{\hskip -\glossglue}\unhbox\gline\hfill} - % Alternative to glt, when one wants to - % put a number but no translation. - -\def\glend{\end{flushleft}} % Ends the gloss environment. - -% The following TeX code is adapted, with permission, from: -% gloss.tex: Macros for vertically aligning words in consecutive sentences. -% Version: 1.0 release: 26 November 1990 -% Copyright (c) 1991 Marcel R. van der Goot (marcel@cs.caltech.edu). -% Original gloss.tex and gloss.doc are available from -% csvax.cs.caltech.edu [131.215.131.131] in pub/tex -% and many other anonymous ftp archives. - -\newbox\lineone % boxes with words from first line -\newbox\linetwo -\newbox\linethree -\newbox\wordone % a word from the first line (hbox) -\newbox\wordtwo -\newbox\wordthree -\newbox\gline % the constructed double line (hbox) -\newskip\glossglue % extra glue between glossed pairs or triples -% \glossglue = 0pt plus 2pt minus 1pt % allow stretch/shrink between words -\glossglue = 5pt plus 2pt minus 1pt % allow stretch/shrink between words -\newif\ifnotdone - -\let\eachwordone=\it -\let\eachwordtwo=\rm -\let\eachwordthree=\rm - -\def\lastword#1#2#3% #1 = \each, #2 = line box, #3 = word box - {\setbox#2=\vbox{\unvbox#2% - \global\setbox#3=\lastbox - }% - \ifvoid#3\global\setbox#3=\hbox{#1\strut{} }\fi - % extra space following \strut in case #1 needs a space - } - -\def\testdone - {\ifdim\ht\lineone=0pt - \ifdim\ht\linetwo=0pt \notdonefalse % tricky space after pt - \else\notdonetrue - \fi - \else\notdonetrue - \fi - } - -{\catcode`\^^M=12 \endlinechar=-1 % 12 = other -\gdef\getwords(#1,#2)#3 #4^^M% #1=linebox, #2=\each, #3=1st word, #4=remainder - {\setbox#1=\vbox{\hbox{#2\strut#3 }% adds space - \unvbox#1% - }% - \def\more{#4}% - \ifx\more\empty\let\more=\donewords - \else\let\more=\getwords - \fi - \more(#1,#2)#4^^M% - } - -\gdef\donewords(#1,#2)^^M{}% - -\gdef\twosent#1^^M#2^^M% #1 = first line, #2 = second line - {\getwords(\lineone,\eachwordone)#1 ^^M% - \getwords(\linetwo,\eachwordtwo)#2 ^^M% - \loop\lastword{\eachwordone}{\lineone}{\wordone}% - \lastword{\eachwordtwo}{\linetwo}{\wordtwo}% - \global\setbox\gline=\hbox{\unhbox\gline - \hskip\glossglue - \vtop{\box\wordone % vtop was vbox - \nointerlineskip - \box\wordtwo - }% - }% - \testdone - \ifnotdone - \repeat - \egroup % matches \bgroup in \gloss - } - -\gdef\threesent#1^^M#2^^M#3^^M% #1 = first line, #2 = second line, #3 = third - {\getwords(\lineone,\eachwordone)#1 ^^M% - \getwords(\linetwo,\eachwordtwo)#2 ^^M% - \getwords(\linethree,\eachwordthree)#3 ^^M% - \loop\lastword{\eachwordone}{\lineone}{\wordone}% - \lastword{\eachwordtwo}{\linetwo}{\wordtwo}% - \lastword{\eachwordthree}{\linethree}{\wordthree}% - \global\setbox\gline=\hbox{\unhbox\gline - \hskip\glossglue - \vtop{\box\wordone % vtop was vbox - \nointerlineskip - \box\wordtwo - \nointerlineskip - \box\wordthree - }% - }% - \testdone - \ifnotdone - \repeat - \egroup % matches \bgroup in \gloss - } -} % restore \catcode`\^^M - -%\def\gloss % raw TeX macro for 2 aligned lines -% {\bgroup -% \catcode`\^^M=12 -% \twosent -% } - - -%%% -%%% Phrase-structure rules -%%% - -% \psr To print S -> NP VP, use: \psr{S}{NP~VP} - -\newcommand{\psr}[2]{\mbox{\it #1 $\rightarrow$ #2}} - - -%%% -%%% Feature structures -%%% - -% \fs To print a feature structure by itself, type for example -% \fs{case:nom \\ person:P} -% -% \lfs To print the same feature structure with the category -% label N at the top, type: -% \lfs{N}{case:nom \\ person:P} - -% Modified 1990 Dec 5 so that features are left aligned. -% Modified 2001 Mar 27 so that italics are used without the user typing \it. -\newcommand{\fs}[1] -{ - \mbox{\small - $ - \it - \left[ - \!\! - \begin{array}{l} - #1 - \end{array} - \!\! - \right] - $} -} - -% Modified 1990 Dec 5 so that features are left aligned. -\newcommand{\lfs}[2] - { - \mbox{$ - \it - \!\! - \begin{array}[t]{c} - #1 - \\ - \mbox{\small% - $ - \it - \left[ - \!\! - \begin{array}{l} - #2 - \end{array} - \!\! - \right] - $} - \end{array} - \!\! - $} - } - - -%%% -%%% Discourse representation structures -%%% - -% \drs typesets a DRS in box notation a la Kamp. -% Arguments: -% 1. List of discourse variables joined by ~ -% 2. List of conditions joined by \\ -% -% Example: \drs{X}{donkey(X)\\green(X)} -% -% Example: \drs{~}{purple(X,Y)} -% -% Example: \drs{X} -% {named(X,`Pedro') \\ -% \drs{Y}{donkey(Y)\\owns(X,Y)}~~ -% {\large $\Rightarrow$}~ -% \drs{~}{feeds(X,Y)} -% } - -% \sdrs like \drs but first argument is a sentence -% to be displayed above the drs. -% -% Example: \sdrs{A donkey is green.}{X}{donkey(X)\\green(X)} - -% \ifdrs forms 2 DRSes joined with a big arrow. -% Usually used for DRSes nested within another. -% -% Example: \ifdrs{X}{donkey(X)\\hungry(X)} -% {~}{feeds(Pedro,X)} - -% \alifdrs is like \ifdrs but shifted to the left so that an -% embedded `if' structure will line up with ordinary -% DRS conditions. - -% \negdrs forms a DRS preceded by the negation symbol. -% -% Example: \negdrs{X}{donkey(X)\\green(X)} - - -\newcommand{\drs}[2] -{ - { - \it - \begin{tabular}{|l|} - \hline - ~ \vspace{-2ex} \\ - #1 - \\ - ~ \vspace{-2ex} \\ - \hline - ~ \vspace{-2ex} \\ - #2 - \\ - ~ \\ % can't vspace here or the line will come out wrong - \hline - \end{tabular} - } -} - -\newcommand{\sdrs}[3] -{\begin{tabular}{l} -\mbox{\it #1} \\ -~ \\ -\drs{#2}{#3} -\end{tabular}} - -\newcommand{\ifdrs}[4] -{ - \mbox{\drs{#1}{#2}~~{\large $\Rightarrow$}~\drs{#3}{#4}} -} - -\newcommand{\alifdrs}[4] -{ - \mbox{$\!\!\!$\drs{#1}{#2}~~{\large $\Rightarrow$}~\drs{#3}{#4}} -} - -\newcommand{\negdrs}[2] -{ - \mbox{{\large $\neg$}\drs{#1}{#2}} -} - - -% -% Exercises, reference lists, and miscellany -% - -% exercise Environment for exercises, numbered by subsection. -% Optional argument for describing the exercise -% ("Project" or the like). - -% \bx Abbreviation for \begin{exercise} -% \ex Abbreviation for \end{exercise} - -% reflist Environment for hanging-indented list -% (suitable for LSA-style reference list). -% Does NOT require \item before entries. - -% \sentence Displays its argument, flushleft, italicized. - -% \either Displays its arguments as alternatives between -% large curly brackets. Good for alternatives -% within sentences or PS-rules. - -\newtheorem{exercise}{Exercise}[subsection] - -% Exercise numbering resets to 0 not only at the start of -% a subsection, but also at the start of a section or chapter -% even if it is not divided into subsections. -\@addtoreset{exercise}{section} -\@addtoreset{exercise}{chapter} - -\newcommand{\bx}{\begin{exercise}} -\newcommand{\ex}{\end{exercise}} - -\@ifundefined{reflist}{ -\newenvironment{reflist}{\begin{list}{}% -{\setlength{\labelwidth}{0pt} - \setlength{\labelsep}{0pt} - \setlength{\leftmargin}{3em} - \setlength{\itemindent}{-3em} - \setlength{\listparindent}{-3em} - \setlength{\itemsep}{6pt}}\item}{\end{list}} -} -% Modified 1992 Nov 8 to skip defining reflist if reflist is already -% defined. Permits using uga.sty with covingtn.sty. - -\newcommand{\sentence}[1] - {\begin{flushleft}{\it #1}\end{flushleft}} - -\newcommand{\either}[2] -{ - $ - \left\{ - \begin{array}{l} - \makebox{#1} \\ - \makebox{#2} \\ - \end{array} - \right\} - $ -} - -%%%%%%%%%%%%%%%%% End of Covington's Macros %%%%%%%%%%%%%%%%% diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/tlpkg/tlpobj/beton.tlpobj new/tlpkg/tlpobj/beton.tlpobj --- old/tlpkg/tlpobj/beton.tlpobj 1970-01-01 01:00:00.000000000 +0100 +++ new/tlpkg/tlpobj/beton.tlpobj 2010-06-10 18:17:07.000000000 +0200 @@ -0,0 +1,12 @@ +name beton +category Package +revision 15878 +shortdesc Use Concrete fonts. +relocated 1 +longdesc Typeset a LaTeX2e document with the Concrete fonts designed by +longdesc Don Knuth and used in his book "Concrete Mathematics". +runfiles size=1 + RELOC/tex/latex/beton/beton.sty +catalogue-ctan /macros/latex/contrib/beton +catalogue-date 2009-09-24 15:05:48 +0200 +catalogue-license lppl diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/tlpkg/tlpobj/covington.tlpobj new/tlpkg/tlpobj/covington.tlpobj --- old/tlpkg/tlpobj/covington.tlpobj 2010-06-10 18:24:34.000000000 +0200 +++ new/tlpkg/tlpobj/covington.tlpobj 1970-01-01 01:00:00.000000000 +0100 @@ -1,14 +0,0 @@ -name covington -category Package -revision 17750 -shortdesc Linguistic support. -relocated 1 -longdesc Numerous minor LaTeX enhancements for linguistics, including -longdesc multiple accents on the same letter, interline glosses (word- -longdesc by-word translations), Discourse Representation Structures, and -longdesc example numbering. -runfiles size=4 - RELOC/tex/latex/covington/covington.sty -catalogue-ctan /macros/latex/contrib/covington -catalogue-date 2010-04-05 22:57:39 +0200 -catalogue-license pd ++++++ chickenize.doc.tar.xz -> bez123.doc.tar.xz ++++++ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/bez123/README new/doc/latex/bez123/README --- old/doc/latex/bez123/README 1970-01-01 01:00:00.000000000 +0100 +++ new/doc/latex/bez123/README 2009-09-10 01:40:19.000000000 +0200 @@ -0,0 +1,59 @@ +________________________________ +The BEZ123 and MULTIPLY packages + + LaTeX can be used for drawing quadratic Bezier curves. The bez123 +package provides additional facilities for drawing linear, cubic, and +rational quadratic Bezier curves. The multiply package provides a +command for multiplication of a length without numerical overflow. + +______________ +Change History + +Version 1.1b (2009/09/02) +- New maintainer (Will Robertson) + +Version 1.1a (2004/04/16) +- Changed license from LPPL v1.0 to v1.3 +- Updated contact information + +Version 1.1 (1998/10/14) +- Put the multiplication code into a separate package + +----------------------------------------------------------------- + Author: Peter Wilson, Herries Press + Maintainer: Will Robertson (will dot robertson at latex-project dot org) + Copyright 1998--2004 Peter R. Wilson + + This work may be distributed and/or modified under the + conditions of the LaTeX Project Public License, either + version 1.3c of this license or (at your option) any + later version: <http://www.latex-project.org/lppl.txt> + + This work has the LPPL maintenance status "maintained". + The Current Maintainer of this work is Will Robertson. + + This work consists of the files: +README (this file) +bez123.dtx +bez123.ins +bez123.pdf + and the derived files: +bez123.sty +multiply.sty + +----------------------------------------------------------------- + + To install the package: +- run: latex bez123.ins (which will generate bez123.sty and multiply.sty) +- Move bez123.sty and multiply.sty to a location where LaTeX will find them + (typically in a local texmf tree at tex/latex/bez123) and refresh the + file database. See the FAQ on CTAN at help/uk-tex-faq or + http://www.tug.ac.uk/faq for more information on this. + To process the manual: +- run: latex bez123.dtx (Note that bez123.dtx requires bez123.sty. + Several Package Warning messages will occur, but + these can be ignored.) +- run: makeindex -s gind.ist bez123 +- run: latex bez123.dtx +- Print bez123.dvi for a hardcopy of the package manual + Files old/doc/latex/bez123/bez123.pdf and new/doc/latex/bez123/bez123.pdf differ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/luatex/chickenize/README new/doc/luatex/chickenize/README --- old/doc/luatex/chickenize/README 2013-02-26 01:29:48.000000000 +0100 +++ new/doc/luatex/chickenize/README 1970-01-01 01:00:00.000000000 +0100 @@ -1,18 +0,0 @@ -This is the README file of the chickenize package. The package provides several commands and Lua functions to manipulate the input or output tokens of any Lua(La)TeX document. It serves mostly educational and playful usage, but some functions may be used in serious documents. - -To produce the package files, run lualatex on chickinize.dtx, wich should result in the creation of the following files: - chickenize.pdf (documentation) - chickenize.tex (plainTeX user interface) - chickenize.sty (LaTeX user interface) - chickenize.lua (Lua package code) [does the actual work] - -You need an up-to-date TeX Live (2011 or 2012, if possible) to use this package. Maybe a full MiKTeX will do, too. - -For any comments or suggestions, contact me: -arno dot trautmann at gmx dot de - -Hope you have fun with this package! - -This package is copyright © 2013 Arno L. Trautmann. It may be distributed and/or -modified under the conditions of the LaTeX Project Public License, either version 1.3c -of this license or (at your option) any later version. This work has the LPPL maintenance status ‘maintained’. Files old/doc/luatex/chickenize/chickenize.pdf and new/doc/luatex/chickenize/chickenize.pdf differ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/tlpkg/tlpobj/bez123.doc.tlpobj new/tlpkg/tlpobj/bez123.doc.tlpobj --- old/tlpkg/tlpobj/bez123.doc.tlpobj 1970-01-01 01:00:00.000000000 +0100 +++ new/tlpkg/tlpobj/bez123.doc.tlpobj 2010-06-10 18:17:07.000000000 +0200 @@ -0,0 +1,8 @@ +name bez123.doc +category Package +revision 15878 +shortdesc doc files of bez123 +relocated 1 +docfiles size=72 + RELOC/doc/latex/bez123/README + RELOC/doc/latex/bez123/bez123.pdf diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/tlpkg/tlpobj/chickenize.doc.tlpobj new/tlpkg/tlpobj/chickenize.doc.tlpobj --- old/tlpkg/tlpobj/chickenize.doc.tlpobj 2013-02-26 04:33:02.000000000 +0100 +++ new/tlpkg/tlpobj/chickenize.doc.tlpobj 1970-01-01 01:00:00.000000000 +0100 @@ -1,8 +0,0 @@ -name chickenize.doc -category Package -revision 29232 -shortdesc doc files of chickenize -relocated 1 -docfiles size=44 - RELOC/doc/luatex/chickenize/README - RELOC/doc/luatex/chickenize/chickenize.pdf ++++++ chickenize.doc.tar.xz -> bez123.tar.xz ++++++ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/luatex/chickenize/README new/doc/luatex/chickenize/README --- old/doc/luatex/chickenize/README 2013-02-26 01:29:48.000000000 +0100 +++ new/doc/luatex/chickenize/README 1970-01-01 01:00:00.000000000 +0100 @@ -1,18 +0,0 @@ -This is the README file of the chickenize package. The package provides several commands and Lua functions to manipulate the input or output tokens of any Lua(La)TeX document. It serves mostly educational and playful usage, but some functions may be used in serious documents. - -To produce the package files, run lualatex on chickinize.dtx, wich should result in the creation of the following files: - chickenize.pdf (documentation) - chickenize.tex (plainTeX user interface) - chickenize.sty (LaTeX user interface) - chickenize.lua (Lua package code) [does the actual work] - -You need an up-to-date TeX Live (2011 or 2012, if possible) to use this package. Maybe a full MiKTeX will do, too. - -For any comments or suggestions, contact me: -arno dot trautmann at gmx dot de - -Hope you have fun with this package! - -This package is copyright © 2013 Arno L. Trautmann. It may be distributed and/or -modified under the conditions of the LaTeX Project Public License, either version 1.3c -of this license or (at your option) any later version. This work has the LPPL maintenance status ‘maintained’. Files old/doc/luatex/chickenize/chickenize.pdf and new/doc/luatex/chickenize/chickenize.pdf differ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/tex/latex/bez123/bez123.sty new/tex/latex/bez123/bez123.sty --- old/tex/latex/bez123/bez123.sty 1970-01-01 01:00:00.000000000 +0100 +++ new/tex/latex/bez123/bez123.sty 2009-09-10 01:40:19.000000000 +0200 @@ -0,0 +1,382 @@ +%% +%% This is file `bez123.sty', +%% generated with the docstrip utility. +%% +%% The original source files were: +%% +%% bez123.dtx (with options: `bez') +%% +%% ----------------------------------------------------------------- +%% Author: Peter Wilson, Herries Press +%% Maintainer: Will Robertson (will dot robertson at latex-project dot org) +%% Copyright 1998--2004 Peter R. Wilson +%% +%% This work may be distributed and/or modified under the +%% conditions of the LaTeX Project Public License, either +%% version 1.3c of this license or (at your option) any +%% later version: <http://www.latex-project.org/lppl.txt> +%% +%% This work has the LPPL maintenance status "maintained". +%% The Current Maintainer of this work is Will Robertson. +%% +%% This work consists of the files listed in the README file. +%% ----------------------------------------------------------------- +%% +\NeedsTeXFormat{LaTeX2e} +\ProvidesPackage{bez123}[2009/09/02 v1.1b Bezier curves] +\RequirePackage{multiply}[2009/09/02] +\newcommand{\lbezier}[2][0]{\@lbez{#1}#2} +\gdef\@lbez#1(#2,#3)(#4,#5){% +%%%%\def\lbezier#1(#2,#3)(#4,#5){% + \ifnum #1<\@ne + \@ovxx = #4\unitlength + \advance\@ovxx by -#2\unitlength + \ifdim \@ovxx < \z@ + \@ovxx = -\@ovxx + \fi + \@ovyy = #5\unitlength + \advance\@ovyy by -#3\unitlength + \ifdim \@ovyy < \z@ + \@ovyy = -\@ovyy + \fi + \ifdim \@ovxx > \@ovyy + \@multicnt = \@ovxx + \else + \@multicnt = \@ovyy + \fi + \@ovxx = 0.5\@halfwidth + \divide\@multicnt by \@ovxx + \ifnum \qbeziermax < \@multicnt + \@multicnt = \qbeziermax\relax + \fi + \else + \@multicnt = #1\relax + \fi + \@tempcnta = \@multicnt + \advance\@tempcnta by \@ne + \@ovdx = #4\unitlength + \advance\@ovdx by -#2\unitlength + \divide\@ovdx by \@multicnt + \@ovdy = #5\unitlength + \advance\@ovdy by -#3\unitlength + \divide\@ovdy by \@multicnt + \setbox\@tempboxa\hbox{\vrule \@height\@halfwidth + \@depth \@halfwidth + \@width \@wholewidth}% + \put(#2,#3){% + \count@ = \z@ + \@whilenum{\count@ < \@tempcnta}\do + {\@xdim = \count@\@ovdx + \@ydim = \count@\@ovdy + \raise \@ydim + \hb@xt@\z@{\kern\@xdim + \unhcopy\@tempboxa\hss}% + \advance\count@\@ne}}% +} +\newlength{\@wxc} +\newlength{\@wyc} +\newcommand{\cbezier}[2][0]{\@cbez{#1}#2} +\gdef\@cbez#1(#2,#3)(#4,#5)(#6,#7)(#8,#9){% + \ifnum #1<\@ne + \@ovxx = #2\unitlength + \@ovdx = \@ovxx + \@ovdy = #4\unitlength + \ifdim \@ovdy > \@ovxx + \@ovxx = \@ovdy + \fi + \ifdim \@ovdy < \@ovdx + \@ovdx = \@ovdy + \fi + \@ovdy = #6\unitlength + \ifdim \@ovdy > \@ovxx + \@ovxx = \@ovdy + \fi + \ifdim \@ovdy < \@ovdx + \@ovdx = \@ovdy + \fi + \@ovdy = #8\unitlength + \ifdim \@ovdy > \@ovxx + \@ovxx = \@ovdy + \fi + \ifdim \@ovdy < \@ovdx + \@ovdx = \@ovdy + \fi + \advance\@ovxx by -\@ovdx + \@ovyy = #3\unitlength + \@ovdy = \@ovyy + \@ovdx = #5\unitlength + \ifdim \@ovdx > \@ovyy + \@ovyy = \@ovdx + \fi + \ifdim \@ovdx < \@ovdy + \@ovdy = \@ovdx + \fi + \@ovdx = #7\unitlength + \ifdim \@ovdx > \@ovyy + \@ovyy = \@ovdx + \fi + \ifdim \@ovdx < \@ovdy + \@ovdy = \@ovdx + \fi + \@ovdx = #9\unitlength + \ifdim \@ovdx > \@ovyy + \@ovyy = \@ovdx + \fi + \ifdim \@ovdx < \@ovdy + \@ovdy = \@ovdx + \fi + \advance\@ovyy by -\@ovdy + \ifdim \@ovxx > \@ovyy + \@multicnt = \@ovxx + \else + \@multicnt = \@ovyy + \fi + \@ovxx = 0.5\@halfwidth + \divide\@multicnt by \@ovxx + \ifnum \qbeziermax < \@multicnt + \@multicnt = \qbeziermax\relax + \fi + \else + \@multicnt = #1\relax + \fi + \@tempcnta = \@multicnt + \advance\@tempcnta by \@ne + \@ovdx = #4\unitlength \advance\@ovdx by -#2\unitlength + \@ovxx = #6\unitlength \advance\@ovxx by -\@ovdx + \multiply\@ovdx by \thr@@ + \advance\@ovxx by -#4\unitlength \multiply\@ovxx by \thr@@ + \@wxc = #4\unitlength \advance\@wxc by -#6\unitlength + \multiply\@wxc by \thr@@ \advance\@wxc by #8\unitlength + \advance\@wxc by -#2\unitlength \divide\@wxc by \@multicnt + \@ovdy = #5\unitlength \advance\@ovdy by -#3\unitlength + \@ovyy = #7\unitlength \advance\@ovyy by -\@ovdy + \multiply\@ovdy by \thr@@ + \advance\@ovyy by -#5\unitlength \multiply\@ovyy by \thr@@ + \@wyc = #5\unitlength \advance\@wyc by -#7\unitlength + \multiply\@wyc by \thr@@ \advance\@wyc by #9\unitlength + \advance\@wyc by -#3\unitlength \divide\@wyc by \@multicnt + \setbox\@tempboxa\hbox{\vrule \@height\@halfwidth + \@depth \@halfwidth + \@width \@wholewidth}% + \put(#2,#3){% + \count@ = \z@ + \@whilenum{\count@ < \@tempcnta}\do + {\@xdim = \count@\@wxc + \advance\@xdim by \@ovxx + \divide\@xdim by \@multicnt + \multiply\@xdim by \count@ + \advance\@xdim by \@ovdx + \divide\@xdim by \@multicnt + \multiply\@xdim by \count@ + \@ydim = \count@\@wyc + \advance\@ydim by \@ovyy + \divide\@ydim by \@multicnt + \multiply\@ydim by \count@ + \advance\@ydim by \@ovdy + \divide\@ydim by \@multicnt + \multiply\@ydim by \count@ + \raise \@ydim + \hb@xt@\z@{\kern\@xdim + \unhcopy\@tempboxa\hss}% + \advance\count@\@ne}}% +} +\newlength{\@ww} +\newlength{\@wwa} +\newlength{\@wwb} +\newlength{\@wwo} +\newlength{\@wwi} +\newcounter{@pntscale} +\newcounter{weightscale} +\newlength{\botscale} +\newcommand{\setweightscale}[1]{\setcounter{weightscale}{#1}} +\newcommand{\resetweightscale}{\setcounter{weightscale}{10000}} +\resetweightscale +\newcommand{\rqbezier}[2][0]{\@rqbez{#1}#2} +\gdef\@rqbez#1(#2,#3)(#4,#5)(#6,#7)(#8){% + \@ovxx = #8\unitlength + \ifdim\@ovxx = \unitlength + \PackageWarning{bez123}{Rational quadratic denerates to quadratic} + \qbezier[#1](#2,#3)(#4,#5)(#6,#7) + \else + \ifdim\@ovxx = \z@ + \PackageWarning{bez123}{Rational quadratic degenerates to linear} + \lbezier[#1](#2,#3)(#6,#7) + \else + \@ovxx = #4\unitlength + \advance\@ovxx by -#2\unitlength + \ifdim \@ovxx < \z@ + \@ovxx = -\@ovxx + \fi + \@ovdx = #6\unitlength + \advance\@ovdx by -#4\unitlength + \ifdim \@ovdx < \z@ + \@ovdx = -\@ovdx + \fi + \ifdim \@ovxx < \@ovdx + \@ovxx = \@ovdx + \fi + \@ovyy = #5\unitlength + \advance\@ovyy by -#3\unitlength + \ifdim \@ovyy < \z@ + \@ovyy = -\@ovyy + \fi + \@ovdy = #7\unitlength + \advance\@ovdy by -#5\unitlength + \ifdim \@ovdy < \z@ + \@ovdy = -\@ovdy + \fi + \ifdim \@ovyy < \@ovdy + \@ovyy = \@ovdy + \fi + \ifdim \@ovxx > \@ovyy + \@multicnt = \@ovxx + \else + \@multicnt = \@ovyy + \fi + \@wwi = \@multicnt sp + \ifnum #1<\@ne + \@ovxx = 0.5\@halfwidth + \divide\@multicnt by \@ovxx + \ifnum\qbeziermax < \@multicnt + \@multicnt = \qbeziermax\relax + \fi + \else + \@multicnt = #1\relax + \fi + \@tempcnta = \@multicnt + \advance\@tempcnta by \@ne + \divide\@tempcnta by \tw@ + \advance\@tempcnta by \@ne + \@wwo = \maxdimen + \advance\@wwo by -\@wwi + \divide\@wwo by \tw@ + \divide\@wwo by \@wwi + \@wwi = 10sp + \@wwi = #8\@wwi + \ifdim\@wwi < \z@ + \@wwi = -\@wwi + \fi + \divide\@wwi by 10\relax + \ifdim\@wwi < \@wwo + \c@@pntscale = \@ne + \else + \divide\@wwi by \tw@ + \ifdim\@wwi < \@wwo + \c@@pntscale = \tw@ + \else + \divide\@wwi by \tw@ + \ifdim\@wwi < \@wwo + \c@@pntscale = 4\relax + \else + \divide\@wwi by \tw@ + \ifdim\@wwi < \@wwo + \c@@pntscale = 8\relax + \else + \c@@pntscale = 16\relax + \fi + \fi + \fi + \fi + \@ovxx = #4\unitlength \advance\@ovxx by -#2\unitlength + \multiply\@ovxx by \tw@ + \divide\@ovxx by \c@@pntscale + \@ovdx = #8\@ovxx + \@ovxx = #6\unitlength \advance\@ovxx by -#2\unitlength + \divide\@ovxx by \c@@pntscale + \advance\@ovxx by -\@ovdx + \divide\@ovxx by \@multicnt + \@ovyy = #5\unitlength \advance\@ovyy by -#3\unitlength + \multiply\@ovyy by \tw@ + \divide\@ovyy by \c@@pntscale + \@ovdy = #8\@ovyy + \@ovyy = #7\unitlength \advance\@ovyy by -#3\unitlength + \divide\@ovyy by \c@@pntscale + \advance\@ovyy by -\@ovdy + \divide\@ovyy by \@multicnt + \setlength{\botscale}{\c@weightscale sp} + \@wwo = \botscale + \@wwi = #8\@wwo + \@wwa = \@wwo \advance\@wwa by -\@wwi + \multiply\@wwa by \tw@ + \@wwb = \@wwa + \divide\@wwb by \@multicnt + \@wwi = \botscale + \setbox\@tempboxa\hbox{\vrule \@height\@halfwidth + \@depth \@halfwidth + \@width \@wholewidth}% + \put(#2,#3){% + \count@ = \z@ + \@whilenum{\count@ < \@tempcnta}\do + {\@xdim = \count@\@ovxx + \advance\@xdim by \@ovdx + \divide\@xdim by \@multicnt + \multiply\@xdim by \count@ + \@ydim = \count@\@ovyy + \advance\@ydim by \@ovdy + \divide\@ydim by \@multicnt + \multiply\@ydim by \count@ + \@ww = \count@\@wwb + \advance\@ww by -\@wwa + \divide\@ww by \@multicnt + \multiply\@ww by \count@ + \advance\@ww by \@wwo + \divide\@ww by \c@@pntscale + \ifdim\@ww = \z@ + \else + \divide\@xdim by \@ww + \divide\@ydim by \@ww + \fi + \multnooverflow{\@xdim}{\botscale}% + \multnooverflow{\@ydim}{\botscale}% + \raise \@ydim + \hb@xt@\z@{\kern\@xdim + \unhcopy\@tempboxa\hss}% + \advance\count@\@ne}} + \@ovxx = #4\unitlength \advance\@ovxx by -#6\unitlength + \multiply\@ovxx by \tw@ + \divide\@ovxx by \c@@pntscale + \@ovdx = #8\@ovxx + \@ovxx = #2\unitlength \advance\@ovxx by -#6\unitlength + \divide\@ovxx by \c@@pntscale + \advance\@ovxx by -\@ovdx + \divide\@ovxx by \@multicnt + \@ovyy = #5\unitlength \advance\@ovyy by -#7\unitlength + \multiply\@ovyy by \tw@ + \divide\@ovyy by \c@@pntscale + \@ovdy = #8\@ovyy + \@ovyy = #3\unitlength \advance\@ovyy by -#7\unitlength + \divide\@ovyy by \c@@pntscale + \advance\@ovyy by -\@ovdy + \divide\@ovyy by \@multicnt + \put(#6,#7){% + \count@ = \z@ + \@whilenum{\count@ < \@tempcnta}\do + {\@xdim = \count@\@ovxx + \advance\@xdim by \@ovdx + \divide\@xdim by \@multicnt + \multiply\@xdim by \count@ + \@ydim = \count@\@ovyy + \advance\@ydim by \@ovdy + \divide\@ydim by \@multicnt + \multiply\@ydim by \count@ + \@ww = \count@\@wwb + \advance\@ww by -\@wwa + \divide\@ww by \@multicnt + \multiply\@ww by \count@ + \advance\@ww by \@wwo + \divide\@ww by \c@@pntscale + \ifnum\@ww = \z@ + \else + \divide\@xdim by \@ww + \divide\@ydim by \@ww + \fi + \multnooverflow{\@xdim}{\botscale}% + \multnooverflow{\@ydim}{\botscale}% + \raise \@ydim + \hb@xt@\z@{\kern\@xdim + \unhcopy\@tempboxa\hss}% + \advance\count@\@ne}} + \fi\fi} +\endinput +%% +%% End of file `bez123.sty'. diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/tex/latex/bez123/multiply.sty new/tex/latex/bez123/multiply.sty --- old/tex/latex/bez123/multiply.sty 1970-01-01 01:00:00.000000000 +0100 +++ new/tex/latex/bez123/multiply.sty 2009-09-04 02:49:19.000000000 +0200 @@ -0,0 +1,84 @@ +%% +%% This is file `multiply.sty', +%% generated with the docstrip utility. +%% +%% The original source files were: +%% +%% bez123.dtx (with options: `mult') +%% +%% ----------------------------------------------------------------- +%% Author: Peter Wilson, Herries Press +%% Maintainer: Will Robertson (will dot robertson at latex-project dot org) +%% Copyright 1998--2004 Peter R. Wilson +%% +%% This work may be distributed and/or modified under the +%% conditions of the LaTeX Project Public License, either +%% version 1.3c of this license or (at your option) any +%% later version: <http://www.latex-project.org/lppl.txt> +%% +%% This work has the LPPL maintenance status "maintained". +%% The Current Maintainer of this work is Will Robertson. +%% +%% This work consists of the files listed in the README file. +%% ----------------------------------------------------------------- +%% +\ProvidesPackage{multiply}[1998/10/14 v1.1 Multiplication of lengths without overflow] +\newlength{\n@fl@wa} +\newlength{\n@fl@wb} +\newlength{\n@fl@wc} +\newif\ifch@nge +\newcommand{\multnooverflow}[2]{% + \n@fl@wa = #1\relax% + \n@fl@wb = #2\relax% + \ch@ngefalse% + \ifnum\n@fl@wb = \@ne% + \else% + \ifnum\n@fl@wb = \z@% + \n@fl@wa = \z@% + \else% + \ifnum\n@fl@wb = \m@ne% + \ch@ngetrue% + \else% + \ifnum\n@fl@wa = \z@% + \else% + \ifnum\n@fl@wa = \@ne% + \n@fl@wa = \n@fl@wb% + \else% + \ifnum\n@fl@wa = \m@ne% + \n@fl@wa = -\n@fl@wb% + \else% + \ifnum\n@fl@wa < \z@% + \ch@ngetrue% + \n@fl@wa = -\n@fl@wa% + \fi% + \ifnum\n@fl@wb < \z@% + \n@fl@wb = -\n@fl@wb% + \ifch@nge% + \ch@ngefalse% + \else% + \ch@ngetrue% + \fi% + \fi% + \n@fl@wc = \maxdimen% + \divide\n@fl@wc by \n@fl@wb% + \advance\n@fl@wc by -1sp% \m@ne + \ifnum\n@fl@wa > \n@fl@wc% + \n@fl@wa = \maxdimen% + \PackageWarning{multiply}{Multiplication overflow}% + \else% + \multiply\n@fl@wa by \n@fl@wb% + \fi% + \fi% + \fi% + \fi% + \fi% + \fi% + \fi% + \ifch@nge% + \n@fl@wa = -\n@fl@wa% + \fi% + #1 = \n@fl@wa% +} +\endinput +%% +%% End of file `multiply.sty'. diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/tlpkg/tlpobj/bez123.tlpobj new/tlpkg/tlpobj/bez123.tlpobj --- old/tlpkg/tlpobj/bez123.tlpobj 1970-01-01 01:00:00.000000000 +0100 +++ new/tlpkg/tlpobj/bez123.tlpobj 2010-06-10 18:17:08.000000000 +0200 @@ -0,0 +1,17 @@ +name bez123 +category Package +revision 15878 +shortdesc Support for Bezier curves. +relocated 1 +longdesc Provides additional facilities in a picture environment for +longdesc drawing linear, cubic, and rational quadratic Bezier curves +longdesc (standard LaTeX only offers non-rational quadratic splines). +longdesc Provides a package multiply that provides a command for +longdesc multiplication of a length without numerical overflow. +runfiles size=4 + RELOC/tex/latex/bez123/bez123.sty + RELOC/tex/latex/bez123/multiply.sty +catalogue-ctan /macros/latex/contrib/bez123 +catalogue-date 2009-09-02 11:33:10 +0200 +catalogue-license lppl1.3 +catalogue-version 1.1b diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/tlpkg/tlpobj/chickenize.doc.tlpobj new/tlpkg/tlpobj/chickenize.doc.tlpobj --- old/tlpkg/tlpobj/chickenize.doc.tlpobj 2013-02-26 04:33:02.000000000 +0100 +++ new/tlpkg/tlpobj/chickenize.doc.tlpobj 1970-01-01 01:00:00.000000000 +0100 @@ -1,8 +0,0 @@ -name chickenize.doc -category Package -revision 29232 -shortdesc doc files of chickenize -relocated 1 -docfiles size=44 - RELOC/doc/luatex/chickenize/README - RELOC/doc/luatex/chickenize/chickenize.pdf ++++++ context-filter.doc.tar.xz -> biber.doc.tar.xz ++++++ ++++ 9141 lines of diff (skipped) ++++++ context-cyrillicnumbers.doc.tar.xz -> bibleref.doc.tar.xz ++++++ ++++ 3929 lines of diff (skipped) ++++++ context-cyrillicnumbers.doc.tar.xz -> bibleref.tar.xz ++++++ ++++ 2388 lines of diff (skipped) ++++++ copyrightbox.doc.tar.xz -> bibtex.doc.tar.xz ++++++ ++++ 5066 lines of diff (skipped) ++++++ copyrightbox.tar.xz -> bibtex.tar.xz ++++++ ++++ 9207 lines of diff (skipped) ++++++ copyrightbox.doc.tar.xz -> bibtex8.doc.tar.xz ++++++ ++++ 1639 lines of diff (skipped) ++++++ copyrightbox.doc.tar.xz -> bibtex8.tar.xz ++++++ ++++ 3667 lines of diff (skipped) ++++++ clock.doc.tar.xz -> block.doc.tar.xz ++++++ Files old/doc/latex/block/block.pdf and new/doc/latex/block/block.pdf differ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/block/block.tex new/doc/latex/block/block.tex --- old/doc/latex/block/block.tex 1970-01-01 01:00:00.000000000 +0100 +++ new/doc/latex/block/block.tex 2010-02-26 01:52:26.000000000 +0100 @@ -0,0 +1,17 @@ +\documentclass[DIV=7, pagesize=auto, version=last]{scrartcl} + +\addtokomafont{title}{\rmfamily} + +\title{The \textsf{block} package} +\author{Chua Eng Huang} +\date{1999/07/19} + + +\begin{document} + +\maketitle + +\noindent +\textsf{block.sty} is a style file for use with the \textsf{letter} class that overwrites the \verb+\opening+ and \verb+\closing+ macros so that letters can be styled with the block letter style instead of the default style. Thus, the return address, the closing, and the signature appear flushed on the left margin. + +\end{document} diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/clock/COPYING new/doc/latex/clock/COPYING --- old/doc/latex/clock/COPYING 2006-01-09 01:49:07.000000000 +0100 +++ new/doc/latex/clock/COPYING 1970-01-01 01:00:00.000000000 +0100 @@ -1,339 +0,0 @@ - GNU GENERAL PUBLIC LICENSE - Version 2, June 1991 - - Copyright (C) 1989, 1991 Free Software Foundation, Inc. - 675 Mass Ave, Cambridge, MA 02139, USA - Everyone is permitted to copy and distribute verbatim copies - of this license document, but changing it is not allowed. - - Preamble - - The licenses for most software are designed to take away your -freedom to share and change it. By contrast, the GNU General Public -License is intended to guarantee your freedom to share and change free -software--to make sure the software is free for all its users. This -General Public License applies to most of the Free Software -Foundation's software and to any other program whose authors commit to -using it. (Some other Free Software Foundation software is covered by -the GNU Library General Public License instead.) You can apply it to -your programs, too. - - When we speak of free software, we are referring to freedom, not -price. Our General Public Licenses are designed to make sure that you -have the freedom to distribute copies of free software (and charge for -this service if you wish), that you receive source code or can get it -if you want it, that you can change the software or use pieces of it -in new free programs; and that you know you can do these things. - - To protect your rights, we need to make restrictions that forbid -anyone to deny you these rights or to ask you to surrender the rights. -These restrictions translate to certain responsibilities for you if you -distribute copies of the software, or if you modify it. - - For example, if you distribute copies of such a program, whether -gratis or for a fee, you must give the recipients all the rights that -you have. You must make sure that they, too, receive or can get the -source code. And you must show them these terms so they know their -rights. - - We protect your rights with two steps: (1) copyright the software, and -(2) offer you this license which gives you legal permission to copy, -distribute and/or modify the software. - - Also, for each author's protection and ours, we want to make certain -that everyone understands that there is no warranty for this free -software. If the software is modified by someone else and passed on, we -want its recipients to know that what they have is not the original, so -that any problems introduced by others will not reflect on the original -authors' reputations. - - Finally, any free program is threatened constantly by software -patents. We wish to avoid the danger that redistributors of a free -program will individually obtain patent licenses, in effect making the -program proprietary. To prevent this, we have made it clear that any -patent must be licensed for everyone's free use or not licensed at all. - - The precise terms and conditions for copying, distribution and -modification follow. - - GNU GENERAL PUBLIC LICENSE - TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION - - 0. This License applies to any program or other work which contains -a notice placed by the copyright holder saying it may be distributed -under the terms of this General Public License. The "Program", below, -refers to any such program or work, and a "work based on the Program" -means either the Program or any derivative work under copyright law: -that is to say, a work containing the Program or a portion of it, -either verbatim or with modifications and/or translated into another -language. (Hereinafter, translation is included without limitation in -the term "modification".) Each licensee is addressed as "you". - -Activities other than copying, distribution and modification are not -covered by this License; they are outside its scope. The act of -running the Program is not restricted, and the output from the Program -is covered only if its contents constitute a work based on the -Program (independent of having been made by running the Program). -Whether that is true depends on what the Program does. - - 1. You may copy and distribute verbatim copies of the Program's -source code as you receive it, in any medium, provided that you -conspicuously and appropriately publish on each copy an appropriate -copyright notice and disclaimer of warranty; keep intact all the -notices that refer to this License and to the absence of any warranty; -and give any other recipients of the Program a copy of this License -along with the Program. - -You may charge a fee for the physical act of transferring a copy, and -you may at your option offer warranty protection in exchange for a fee. - - 2. You may modify your copy or copies of the Program or any portion -of it, thus forming a work based on the Program, and copy and -distribute such modifications or work under the terms of Section 1 -above, provided that you also meet all of these conditions: - - a) You must cause the modified files to carry prominent notices - stating that you changed the files and the date of any change. - - b) You must cause any work that you distribute or publish, that in - whole or in part contains or is derived from the Program or any - part thereof, to be licensed as a whole at no charge to all third - parties under the terms of this License. - - c) If the modified program normally reads commands interactively - when run, you must cause it, when started running for such - interactive use in the most ordinary way, to print or display an - announcement including an appropriate copyright notice and a - notice that there is no warranty (or else, saying that you provide - a warranty) and that users may redistribute the program under - these conditions, and telling the user how to view a copy of this - License. (Exception: if the Program itself is interactive but - does not normally print such an announcement, your work based on - the Program is not required to print an announcement.) - -These requirements apply to the modified work as a whole. If -identifiable sections of that work are not derived from the Program, -and can be reasonably considered independent and separate works in -themselves, then this License, and its terms, do not apply to those -sections when you distribute them as separate works. But when you -distribute the same sections as part of a whole which is a work based -on the Program, the distribution of the whole must be on the terms of -this License, whose permissions for other licensees extend to the -entire whole, and thus to each and every part regardless of who wrote it. - -Thus, it is not the intent of this section to claim rights or contest -your rights to work written entirely by you; rather, the intent is to -exercise the right to control the distribution of derivative or -collective works based on the Program. - -In addition, mere aggregation of another work not based on the Program -with the Program (or with a work based on the Program) on a volume of -a storage or distribution medium does not bring the other work under -the scope of this License. - - 3. You may copy and distribute the Program (or a work based on it, -under Section 2) in object code or executable form under the terms of -Sections 1 and 2 above provided that you also do one of the following: - - a) Accompany it with the complete corresponding machine-readable - source code, which must be distributed under the terms of Sections - 1 and 2 above on a medium customarily used for software interchange; or, - - b) Accompany it with a written offer, valid for at least three - years, to give any third party, for a charge no more than your - cost of physically performing source distribution, a complete - machine-readable copy of the corresponding source code, to be - distributed under the terms of Sections 1 and 2 above on a medium - customarily used for software interchange; or, - - c) Accompany it with the information you received as to the offer - to distribute corresponding source code. (This alternative is - allowed only for noncommercial distribution and only if you - received the program in object code or executable form with such - an offer, in accord with Subsection b above.) - -The source code for a work means the preferred form of the work for -making modifications to it. For an executable work, complete source -code means all the source code for all modules it contains, plus any -associated interface definition files, plus the scripts used to -control compilation and installation of the executable. However, as a -special exception, the source code distributed need not include -anything that is normally distributed (in either source or binary -form) with the major components (compiler, kernel, and so on) of the -operating system on which the executable runs, unless that component -itself accompanies the executable. - -If distribution of executable or object code is made by offering -access to copy from a designated place, then offering equivalent -access to copy the source code from the same place counts as -distribution of the source code, even though third parties are not -compelled to copy the source along with the object code. - - 4. You may not copy, modify, sublicense, or distribute the Program -except as expressly provided under this License. Any attempt -otherwise to copy, modify, sublicense or distribute the Program is -void, and will automatically terminate your rights under this License. -However, parties who have received copies, or rights, from you under -this License will not have their licenses terminated so long as such -parties remain in full compliance. - - 5. You are not required to accept this License, since you have not -signed it. However, nothing else grants you permission to modify or -distribute the Program or its derivative works. These actions are -prohibited by law if you do not accept this License. Therefore, by -modifying or distributing the Program (or any work based on the -Program), you indicate your acceptance of this License to do so, and -all its terms and conditions for copying, distributing or modifying -the Program or works based on it. - - 6. Each time you redistribute the Program (or any work based on the -Program), the recipient automatically receives a license from the -original licensor to copy, distribute or modify the Program subject to -these terms and conditions. You may not impose any further -restrictions on the recipients' exercise of the rights granted herein. -You are not responsible for enforcing compliance by third parties to -this License. - - 7. If, as a consequence of a court judgment or allegation of patent -infringement or for any other reason (not limited to patent issues), -conditions are imposed on you (whether by court order, agreement or -otherwise) that contradict the conditions of this License, they do not -excuse you from the conditions of this License. If you cannot -distribute so as to satisfy simultaneously your obligations under this -License and any other pertinent obligations, then as a consequence you -may not distribute the Program at all. For example, if a patent -license would not permit royalty-free redistribution of the Program by -all those who receive copies directly or indirectly through you, then -the only way you could satisfy both it and this License would be to -refrain entirely from distribution of the Program. - -If any portion of this section is held invalid or unenforceable under -any particular circumstance, the balance of the section is intended to -apply and the section as a whole is intended to apply in other -circumstances. - -It is not the purpose of this section to induce you to infringe any -patents or other property right claims or to contest validity of any -such claims; this section has the sole purpose of protecting the -integrity of the free software distribution system, which is -implemented by public license practices. Many people have made -generous contributions to the wide range of software distributed -through that system in reliance on consistent application of that -system; it is up to the author/donor to decide if he or she is willing -to distribute software through any other system and a licensee cannot -impose that choice. - -This section is intended to make thoroughly clear what is believed to -be a consequence of the rest of this License. - - 8. If the distribution and/or use of the Program is restricted in -certain countries either by patents or by copyrighted interfaces, the -original copyright holder who places the Program under this License -may add an explicit geographical distribution limitation excluding -those countries, so that distribution is permitted only in or among -countries not thus excluded. In such case, this License incorporates -the limitation as if written in the body of this License. - - 9. The Free Software Foundation may publish revised and/or new versions -of the General Public License from time to time. Such new versions will -be similar in spirit to the present version, but may differ in detail to -address new problems or concerns. - -Each version is given a distinguishing version number. If the Program -specifies a version number of this License which applies to it and "any -later version", you have the option of following the terms and conditions -either of that version or of any later version published by the Free -Software Foundation. If the Program does not specify a version number of -this License, you may choose any version ever published by the Free Software -Foundation. - - 10. If you wish to incorporate parts of the Program into other free -programs whose distribution conditions are different, write to the author -to ask for permission. For software which is copyrighted by the Free -Software Foundation, write to the Free Software Foundation; we sometimes -make exceptions for this. Our decision will be guided by the two goals -of preserving the free status of all derivatives of our free software and -of promoting the sharing and reuse of software generally. - - NO WARRANTY - - 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY -FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN -OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES -PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED -OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS -TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE -PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, -REPAIR OR CORRECTION. - - 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING -WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR -REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, -INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING -OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED -TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY -YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER -PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE -POSSIBILITY OF SUCH DAMAGES. - - END OF TERMS AND CONDITIONS - - Appendix: How to Apply These Terms to Your New Programs - - If you develop a new program, and you want it to be of the greatest -possible use to the public, the best way to achieve this is to make it -free software which everyone can redistribute and change under these terms. - - To do so, attach the following notices to the program. It is safest -to attach them to the start of each source file to most effectively -convey the exclusion of warranty; and each file should have at least -the "copyright" line and a pointer to where the full notice is found. - - <one line to give the program's name and a brief idea of what it does.> - Copyright (C) 19yy <name of author> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - -Also add information on how to contact you by electronic and paper mail. - -If the program is interactive, make it output a short notice like this -when it starts in an interactive mode: - - Gnomovision version 69, Copyright (C) 19yy name of author - Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. - This is free software, and you are welcome to redistribute it - under certain conditions; type `show c' for details. - -The hypothetical commands `show w' and `show c' should show the appropriate -parts of the General Public License. Of course, the commands you use may -be called something other than `show w' and `show c'; they could even be -mouse-clicks or menu items--whatever suits your program. - -You should also get your employer (if you work as a programmer) or your -school, if any, to sign a "copyright disclaimer" for the program, if -necessary. Here is a sample; alter the names: - - Yoyodyne, Inc., hereby disclaims all copyright interest in the program - `Gnomovision' (which makes passes at compilers) written by James Hacker. - - <signature of Ty Coon>, 1 April 1989 - Ty Coon, President of Vice - -This General Public License does not permit incorporating your program into -proprietary programs. If your program is a subroutine library, you may -consider it more useful to permit linking proprietary applications with the -library. If this is what you want to do, use the GNU Library General -Public License instead of this License. diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/clock/EMTEX new/doc/latex/clock/EMTEX --- old/doc/latex/clock/EMTEX 2006-01-09 01:49:07.000000000 +0100 +++ new/doc/latex/clock/EMTEX 1970-01-01 01:00:00.000000000 +0100 @@ -1,25 +0,0 @@ -REM This is the installation batch file skeleton for emtex -REM users. Please check this file carefully whether it -REM matches your system before you commit any changes. -REM -REM How to proceed: -REM -REM 1. Check for your drives and paths. -REM 2. Correct the following md and copy statements where -REM necessary. -REM 3. Rename this file from EMTEX to EMTEX.BAT -REM 4. Execute EMTEX.BAT - -ECHO Creating following directories: - -md \emtex\texinput\clock -md \emtex\mfinput\clock -md \emtex\tfm\clock -md \emtex\doc\clock - -ECHO Copying contents into newly created directories: - -copy texinput\*.* \emtex\texinput\clock\ -copy mfinput\*.* \emtex\mfinput\clock\ -copy tfm\*.* \emtex\tfm\clock\ -copy doc\*.* \emtex\doc\clock\ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/clock/HISTORY new/doc/latex/clock/HISTORY --- old/doc/latex/clock/HISTORY 2006-01-09 01:49:07.000000000 +0100 +++ new/doc/latex/clock/HISTORY 1970-01-01 01:00:00.000000000 +0100 @@ -1,13 +0,0 @@ -Changes in the TeX clock - -2001-04-10: Version 0.2 - - - First Public Version of The TeXclock - - -2001-10-01: Version 0.3 - - - Name changed from TeXclock to TeX clock - - - Minor technical corrections, review of - naming conventions, credits given. diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/clock/INSTALL new/doc/latex/clock/INSTALL --- old/doc/latex/clock/INSTALL 2006-01-09 01:49:07.000000000 +0100 +++ new/doc/latex/clock/INSTALL 1970-01-01 01:00:00.000000000 +0100 @@ -1,88 +0,0 @@ - Title: The TeX clock - Version: 0.3 - Author: Oliver Corff - Copyright: Ulaanbaatar, Berlin, Beijing 2001 - Date: October 01, 2001 - Archive Name: clock.zip - Description: A Clock for TeX and LaTeX - System Requirements: TeX, LaTeX or LaTeX2e - - -0. Introduction - -The TeX clock provides little graphical and textual clocks to the -(La)TeX user community. - -1. Installation - -Unpack the archive clock.zip in some temporary directory. - -teTeX users can proceed to section 1.2, MikTeX users should read -section 1.3. - - -1.1 emtex - -If you are an emtex user, read and follow the instructions in the -file EMTEX. - -1.2 teTeX (and other TeX systems based on the TeX Directory Structure) - -Create subdirectories, either in your main TeX installation, or -in any local tree, with the following structure: - - mkdir $TEXMF/tex/latex/clock/ - mkdir $TEXMF/fonts/source/public/mfinput/clock/ - mkdir $TEXMF/fonts/tfm/clock/ - mkdir $TEXMF/doc/clock/ - -Copy the appropriate contents into the newly created directories: - - cp $TMP/texinput/* $TEXMF/tex/latex/clock/ - cp $TMP/mfinput/* $TEXMF/fonts/source/public/mfinput/clock/ - cp $TMP/tfm/mls/* $TEXMF/fonts/tfm/clock/ - cp $TMP/doc/* $TEXMF/doc/clock/ - -Rehash the file name database by executing texhash. - - -1.3 MikTeX - -Read and follow the instructions in the file MIKTEX. - - - -2. Running the TeX clock - -The TeX clock is now ready for use. It is activated by stating - -\usepackage{clock} - -in the preamble of your LaTeX2e document, or by saying - -\input clock - -at the beginning of your TeX (or LaTeX2.09) document. - - -4. Legal Notes - -This software is put under the GNU Public Licence. - -The author cannot accept any responsability for the usability -and/or fitness of this software package for any particular -purpose. - -If you ever happen to modify any of the files, then that file -MUST be renamed prior to redistribution. Please contact the author -(e-mail: corff@zedat.fu-berlin.de) if you discover bugs, deficiencies -etc. - -Thank you for using the TeX clock! - - Ulaanbaatar, Beijing, Berlin, - April 2001 - - Oliver Corff - corff@zedat.fu-berlin.de - corff@arvis.ac.mn diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/clock/MIKTEX new/doc/latex/clock/MIKTEX --- old/doc/latex/clock/MIKTEX 2006-01-09 01:49:07.000000000 +0100 +++ new/doc/latex/clock/MIKTEX 1970-01-01 01:00:00.000000000 +0100 @@ -1,33 +0,0 @@ -REM This is the installation batch file skeleton for MikTeX -REM users. Please check this file carefully whether it -REM matches your system before you commit any changes. -REM -REM How to proceed: -REM -REM 1. Check for your drives and paths. -REM 2. Correct the following md and copy statements where -REM necessary. -REM 3. Rename this file from MIKTEX to MIKTEX.BAT -REM 4. Execute MIKTEX.BAT - -ECHO Creating following directories: - -md \localtexmf\texinput\clock -md \localtexmf\mfinput\clock -md \localtexmf\tfm\clock -md \localtexmf\doc\clock - -ECHO Copying contents into newly created directories: - -copy texinput\*.* \localtexmf\tex\latex\clock\ -copy mfinput\*.* \localtexmf\fonts\source\clock\ -copy tfm\*.* \localtexmf\fonts\tfm\clock\ -copy doc\*.* \localtexmf\doc\clock\ - -ECHO Remake file database: - -cd \texmf\miktex\config -configure -u -cd \temp\clock - -ECHO Everything should be installed now! diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/clock/README new/doc/latex/clock/README --- old/doc/latex/clock/README 2006-01-09 01:49:07.000000000 +0100 +++ new/doc/latex/clock/README 1970-01-01 01:00:00.000000000 +0100 @@ -1,19 +0,0 @@ -Package name: clock (The TeX clock) -Package authors: Oliver Corff -Version/Release: 0.3 - -Features: - -The TeX clock provides various graphical and textual clocks for -TeX and LaTeX2e documents. - -Installation: - -emtex users: Read and follow instructions in EMTEX - -MikTeX users: Read and follow instructions in MIKTEX - -tetex users: Installation notes are contained in INSTALL - - -OC, October 2001 Files old/doc/latex/clock/clockdoc.pdf and new/doc/latex/clock/clockdoc.pdf differ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/doc/latex/clock/clockdoc.tex new/doc/latex/clock/clockdoc.tex --- old/doc/latex/clock/clockdoc.tex 2006-01-09 01:49:07.000000000 +0100 +++ new/doc/latex/clock/clockdoc.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,160 +0,0 @@ -\documentclass[12pt]{ltxdoc} -\usepackage{clock} - -\newcommand\exa{\nopagebreak \begin{flushleft}\smallskip \nopagebreak - \begin{minipage}[t]{6cm}\sloppy} -\newcommand\exb{\end{minipage}\kern 1cm\begin{minipage}[t]{8cm}\sloppy } -\newcommand\exc{\end{minipage}\kern -3cm \smallskip\end{flushleft}} - -\ClockFramefalse -\title{{\bigclockfont\clock{10}{10}}\\[0.5cm] - The \TeX\ Clock 0.3} -\author{Oliver Corff} -\date{October 01, 2001} -\begin{document} -\maketitle - - -\section{Graphical Clocks} - -The \TeX\ clock is a small hack\footnote{% - The \TeX\ clock was inspired by a discussion on - \texttt{comp.text.tex} somewhen in spring 2001; - special thanks to Daniel Luecking for the detection - of spurious spaces.} -for those who desire to show the time -in a graphical fashion. The basic command available is -\verb-\clock{..}{..}- which takes two arguments: hours and minutes. It -does not matter whether the hours are given in a 12h or a 24h range; -the \TeX\ clock understands both. - -When saying \verb-\clocktime- (without any argument) then the \TeX\ clock -will output the current system time at time of compilation in graphical -manner: - - -\exa - A random time: \clock{13}{47}\\ - The compilation time: \clocktime -\exb - \begin{verbatim} - A random time: \clock{13}{47}\\ - The compilation time: \clocktime - \end{verbatim} -\exc - - -\section{Installation} - -Before, however, we go into the details of the \TeX\ clock, some notes -on the installation of this software package. -The installation procedure depends on the nature of the actual -\TeX\ system. The directory tree of e.\,g., teTeX is different -from the emtex tree; hence the source archive \texttt{clock.zip} -features the following subdirectories the contents of which has to be -placed into appropriate branches of the \TeX\ installation: -\begin{sloppypar} -\begin{itemize} - \item \texttt{mfinput} holds the Metafont source file - for the clock. The suggested path for emtex - users is \verb"\emtex\mfinput\clock"; for teTeX users - \verb"$TEXMF/fonts/source/public/clock" is a suitable - choice. - \item \texttt{tfm} holds the font metrics file. - The suggested path for emtex users is \verb"\emtex\tfm\clock"; - for teTeX users \verb"$TEXMF/fonts/tfm/public/clock" - is a suitable choice. - \item \texttt{texinput} holds the style files which are read - by \TeX\ and \LaTeXe. - The suggested path for emtex users is - \verb"\emtex\texinput\clock"; for teTeX users - \verb"$TEXMF/tex/latex/clock" is a suitable choice. - \item \texttt{doc} contains the documentation (the document - which you are reading right now). It can be placed - in \verb"\emtex\doc\clock" (for emtex users) or - \verb"$TEXMF/doc/latex/clock" (for teTeX users). -\end{itemize} -\end{sloppypar} - -It may become necessary to rehash the directory database of the -\TeX\ system. When in doubt, consult your system administrator or -local \TeX\ wizard. -On teTeX systems, the command \texttt{texhash} will perform this service. - - -\section{Activating the \TeX\ clock} - -\begin{sloppypar} -In order to access the features of this little clock, \TeX\ users -put \verb*-\input clock- near the beginning of their document, while -\LaTeXe\ users say \verb-\usepackage{clock}- in the preamble of -their document. There are no options for the \TeX\ clock. - - -\section{Clock Styles} - -The appearance of the clock is controlled by two style parameters. -\verb-\ClockFrame- is a Boolean parameter and can be \verb-true- or -\verb-false-. Saying \verb-\ClockFramefalse- lets the border -disappear, saying \verb-\ClockFrametrue- lets the border appear. -\end{sloppypar} - -The parameter \verb-ClockStyle- takes a number between $0$ and $3$ -where $0$ stands for a clock with invisible dial: -\begin{center} -\begin{tabular}{ccc} -\texttt{\char92 Clockstyle=}\textit{n} & With Border & Without Border\\ -0 & \clockfont\ClockStyle=0 \ClockFrametrue\clock{10}{10} - & \clockfont\ClockStyle=0 \ClockFramefalse\clock{10}{10}\\ -1 & \clockfont\ClockStyle=1 \ClockFrametrue\clock{10}{10} - & \clockfont\ClockStyle=1 \ClockFramefalse\clock{10}{10}\\ -2 & \clockfont\ClockStyle=2 \ClockFrametrue\clock{10}{10} - & \clockfont\ClockStyle=2 \ClockFramefalse\clock{10}{10}\\ -3 & \clockfont\ClockStyle=3 \ClockFrametrue\clock{10}{10} - & \clockfont\ClockStyle=3 \ClockFramefalse\clock{10}{10} -\end{tabular} -\end{center} - -When used with \LaTeX2e, the size of the clock will automatically -adapt to the text environment, but if the user so desires, deviating -sizes can be selected with the usual font size commands. - -\section{The Text Clock} - -A graphical clock is not always ideal, sometimes a simple four-digit -digital display is more useful. For this purpose, the \TeX\ clock -provides a text-style clock. -Saying \verb-\texttime- shows the system time at the time of -compilation in a colon-separated 24 hour format. -Of course, the hours of the day are available as \verb-\texthours-, -and the minutes can be accessed by saying \verb-\textminutes- - -\exa - The compilation time is: \texttime\\ - Minute \textminutes\ of the hour\\ - Hour \texthours\ of the day\\ -\exb - \begin{verbatim} - The compilation time is: \texttime\\ - Minute \textminutes\ of the hour\\ - Hour \texthours\ of the day\\ - \end{verbatim} -\exc - -\section{The \TeX\ clockwork} - -\begin{sloppypar} -The inner workings of the \TeX\ clock are of astonishing simplicity. -Sixty different minute hands and the same number of hour hands are -stored as characters, and for any given minute \verb-\minute- the appopriate -minute hand is selected like \verb-\char\minute-. While the time -of minutes translates directly into the minute hand escapement, -the escapement of the hour hand has to be augmented by tiny steps -calculated from the minutes in order to create a natural, clock-like -look as the hour hand stands more often than not between full hours. -The border and the -various dials are stored as individual characters which then can be -added to the display of the clock as desired. -\end{sloppypar} - -\end{document} diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/tlpkg/tlpobj/block.doc.tlpobj new/tlpkg/tlpobj/block.doc.tlpobj --- old/tlpkg/tlpobj/block.doc.tlpobj 1970-01-01 01:00:00.000000000 +0100 +++ new/tlpkg/tlpobj/block.doc.tlpobj 2010-06-10 18:20:36.000000000 +0200 @@ -0,0 +1,8 @@ +name block.doc +category Package +revision 17209 +shortdesc doc files of block +relocated 1 +docfiles size=17 + RELOC/doc/latex/block/block.pdf + RELOC/doc/latex/block/block.tex diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/tlpkg/tlpobj/clock.doc.tlpobj new/tlpkg/tlpobj/clock.doc.tlpobj --- old/tlpkg/tlpobj/clock.doc.tlpobj 2010-06-10 18:22:19.000000000 +0200 +++ new/tlpkg/tlpobj/clock.doc.tlpobj 1970-01-01 01:00:00.000000000 +0100 @@ -1,14 +0,0 @@ -name clock.doc -category Package -revision 15878 -shortdesc doc files of clock -relocated 1 -docfiles size=35 - RELOC/doc/latex/clock/COPYING - RELOC/doc/latex/clock/EMTEX - RELOC/doc/latex/clock/HISTORY - RELOC/doc/latex/clock/INSTALL - RELOC/doc/latex/clock/MIKTEX - RELOC/doc/latex/clock/README - RELOC/doc/latex/clock/clockdoc.pdf - RELOC/doc/latex/clock/clockdoc.tex ++++++ clock.tar.xz -> block.tar.xz ++++++ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/fonts/source/public/clock/clock.mf new/fonts/source/public/clock/clock.mf --- old/fonts/source/public/clock/clock.mf 2006-01-10 00:38:21.000000000 +0100 +++ new/fonts/source/public/clock/clock.mf 1970-01-01 01:00:00.000000000 +0100 @@ -1,137 +0,0 @@ -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -% File: clock.mf -% Date: April 10, 2001 -% Author: Oliver Corff -% (c) 2001 Ulaanbaatar, Beijing, Berlin -% -% A metafont for providing the clock to LaTeX-users. -% -% Usage: see package clock -% -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -%%%% This font contains characters for hands and dials. %%%%% -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% - -mode_setup; - mg:=4/4; - thin#:=mg*1pt#; - width#:=mg*16pt#; - height#:=mg*12pt#; - depth#:=mg*4pt#; - margin#:=mg*1.05pt#; - - define_pixels(width,height,depth,thin,margin); - - font_size = 10pt#; - - font_x_height = 16pt#; - % font_quad = 16pt#; - font_normal_space = 0pt#; - font_extra_space = 0pt#; -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -% -% All sorts of clock parts -% -def MinuteHand (expr minutes) = % Minutenzeiger - z1=(w/2,1/2(h-d)); - z2=(w/2,27/36h-margin); - pickup pencircle scaled 1/2thin; % rotated (-minutes*6); - draw (z1--z2) rotatedabout (z1,-minutes*6); -enddef; - -def HourHand (expr minutes) = % Stundenzeiger - z1=(w/2,1/2(h-d)); - z2=(w/2,24/36h-margin); - pickup pencircle scaled 9/16thin; % rotated (-minutes*6); - draw (z1--z2) rotatedabout (z1,-minutes*6); -enddef; - -def Hands (expr minutes) = % Beide Zeiger - % - beginchar(minutes+64,width#,height#,depth#); - MinuteHand(minutes); - endchar; - % - beginchar(minutes+128,width#,height#,depth#); - HourHand(minutes); - endchar; -enddef; - -def NESW = - % This routine places ticks at 12, 3, 6 and 9 o'clock - for l = 0,3,6,9: - top z5=(w/2,h-margin); - z7=(w/2,1/2(h-d)); - z6=6/36[z5,z7]; - draw (z5--z6) rotatedabout (z7,-l*30); - endfor; -enddef; - -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -% -% All sorts of dials -% -beginchar("0",width#,height#,depth#); - top z1=(0.5w,h-margin); % 12 Uhr - rt z2=(w-margin,0.5(h-d)); % 3 Uhr - bot z3=(x1,-d+margin); % 6 Uhr - lft z4=(0+margin,y2); % 9 Uhr - - pickup pencircle scaled 1/2thin; - draw z1...z2...z3...z4...cycle; -endchar; -% -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -% -beginchar("1",width#,height#,depth#); - % - % "Standard", or "Classical" dial - % with indications for every hour - % - pickup pencircle scaled 5/8thin; - NESW; - - pickup pencircle scaled 2/4thin; - for l = 1,2,4,5,7,8,10,11: - numeric x[]; - numeric y[]; - top z5=(w/2,h-margin); - z7=(w/2,1/2(h-d)); - z6=3/36[z5,z7]; - draw (z5--z6) rotatedabout (z7,-l*30); - endfor; -endchar; -% -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -% -beginchar("2",width#,height#,depth#); - % - % A rather minimalist dial, with - % just a dot marking each hour - % - pickup pencircle scaled 2/4thin; - for l = 0 step 1 until 11: - top z2=(w/2,h-margin-6/8thin); - z1=(w/2,1/2(h-d)); - drawdot(z2) rotatedabout (z1,-l*30); - endfor; -endchar; -% -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -% -beginchar("3",width#,height#,depth#); - % A radically minimalist dial - pickup pencircle scaled 5/8thin; - NESW; -endchar; -% -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -% -% The true center of activity: -% create both hands at the same time -% -for minutes = 0 step 1 until 59: - Hands(minutes); -endfor; -end. - Files old/fonts/tfm/public/clock/clock.tfm and new/fonts/tfm/public/clock/clock.tfm differ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/tex/latex/block/block.sty new/tex/latex/block/block.sty --- old/tex/latex/block/block.sty 1970-01-01 01:00:00.000000000 +0100 +++ new/tex/latex/block/block.sty 2010-02-26 01:52:26.000000000 +0100 @@ -0,0 +1,33 @@ +\NeedsTeXFormat{LaTeX2e}[1996/06/01] \NeedsTeXFormat{LaTeX2e} + +\renewcommand*{\opening}[1]{\ifx\@empty\fromaddress + \thispagestyle{firstpage}% + {%\raggedleft + \@date\par}% + \else % home address + \thispagestyle{empty}% + {%\raggedleft\begin{tabular}{l@{}}\ignorespaces + \fromaddress \\*[2\parskip]% + \@date %\end{tabular} + \par}% + \fi + \vspace{2\parskip}% + {\raggedright \toname \\ \toaddress \par}% + \vspace{2\parskip}% + #1\par\nobreak} +\renewcommand{\closing}[1]{\par\nobreak\vspace{\parskip}% + \stopbreaks + \noindent + \ifx\@empty\fromaddress\else + %\hspace*{\longindentation} + \fi + %\parbox{\indentedwidth} + {\raggedright + \ignorespaces #1\\[6\medskipamount]% + \ifx\@empty\fromsig + \fromname + \else \fromsig \fi\strut}% + \par} +\endinput +%% +%% End of file `block.sty'. diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/tex/latex/clock/clock.sty new/tex/latex/clock/clock.sty --- old/tex/latex/clock/clock.sty 2006-01-13 00:53:08.000000000 +0100 +++ new/tex/latex/clock/clock.sty 1970-01-01 01:00:00.000000000 +0100 @@ -1,45 +0,0 @@ -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -% File: clock.sty -% Date: April 10, 2001 -% Author: Oliver Corff -% (c) 2001 Ulaanbaatar, Macau, Berlin -% -% A package for providing graphical -% clocks to TeX- and LaTeX-users. -% -% Usage: \usepackage{clock} -% -% No options. -% -% NB: This package requires LaTeX2e! -% -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -% -% Identification -% -\NeedsTeXFormat{LaTeX2e} -\ProvidesPackage{clock}[2001/04/10 v0.1 TeXclock] -% -% -% Preliminary declarations -% -\DeclareFontFamily{U}{clock}{} -\DeclareFontShape{U}{clock}{m}{n}{% - <-> clock}{} -\DeclareFontSubstitution{U}{clock}{m}{n} -% -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -% -% Loading the clock command structure -% -\def\LaTeXclock{} -\input clock.tex -\newcommand{\clockfont}{\usefont{U}{clock}{m}{n}\selectfont} -\newcommand{\bigclockfont}{\Huge\usefont{U}{clock}{m}{n}\selectfont} -% -% -% No options with this package. -% -% No More declarations -% -% End of file `clock.sty'. diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/tex/latex/clock/clock.tex new/tex/latex/clock/clock.tex --- old/tex/latex/clock/clock.tex 2006-06-02 19:33:01.000000000 +0200 +++ new/tex/latex/clock/clock.tex 1970-01-01 01:00:00.000000000 +0100 @@ -1,123 +0,0 @@ -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -% File: clock.tex -% Date: April 10, 2001 -% Author: Oliver Corff -% (c) 2001 Ulaanbaatar, Macau, Berlin -% -% A package for providing graphical -% clocks to TeX- and LaTeX-users. -% -% Usage: \input clock -% -% No options. -% -% NB: This file does not require LaTeX2e! -% -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -% -% Size definitions -% -\ifx\LaTeXclock\undefined - \font\myclockfont clock - \font\mybigclockfont clock at 24pt - % - \def\clockfont{\let\clockfont\myclockfont} - \def\bigclockfont{\let\clockfont\mybigclockfont} -\fi - -\ifx\TeXclock\undefined - \def\TeXclock{} - \catcode`@ 11 -\else - \endinput -\fi - -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -% -% Variables -% - \newcount\time@in@minutes - \newcount\floor@minutes - \newcount\hour@minutes - \newcount\text@hours - \newcount\text@minutes - \newcount\my@minute - \newcount\my@minutes - \newcount\my@hour - \newcount\ClockStyle % one of 1 2 3 4 - \global\newif\ifClockFrame % one of true false -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -% -% Time Calculations -% -\def\calc@hours{% - \time@in@minutes=\time - \text@hours=\time@in@minutes - \divide\text@hours by 60 } - -\def\texthours{% - \calc@hours - \the\text@hours } - -\def\calc@minutes{% - \calc@hours - \floor@minutes=\text@hours - \multiply\floor@minutes by 60 - \text@minutes=\time@in@minutes - \advance\text@minutes-\floor@minutes } - -\def\textminutes{% - \calc@minutes - \ifnum\text@minutes<10 0\fi - \the\text@minutes} - -\def\texttime{\texthours:\textminutes} - -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -% -% Display Operations -% -\def\show@clock#1#2{% - {\clockfont % - \char#1\kern-1.00ex \char#2% % Print hours and minutes! - \advance\ClockStyle by 48 % Build dial - \ifnum\ClockStyle>48 - \kern-1ex\char\ClockStyle % - \fi - \ifClockFrame \kern-1ex\char48 \fi - }} - -\def\calc@movement{% - \ifnum\my@hour>11 \advance\my@hour by -12 \fi - \multiply\my@hour by 5 - \my@minutes=\my@minute - \divide\my@minutes by 12 - \advance\my@hour by \my@minutes - \advance\my@hour by 128 - \advance \my@minute by 64 - } - -\def\clock#1#2{% - \my@hour#1\my@minute#2% - \calc@movement - \show@clock{\my@hour}{\my@minute}} - - -\def\clocktime{% - \calc@minutes % Calls \calc@hours - \clock{\text@hours}{\text@minutes} - } - -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -% -% Initial Settings -% -\ClockStyle=1 -\ClockFramefalse -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -% -% Some Housekeeping... -% -\ifx\LaTeXclock\undefined - \catcode`@ 12 -\fi diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/tlpkg/tlpobj/block.tlpobj new/tlpkg/tlpobj/block.tlpobj --- old/tlpkg/tlpobj/block.tlpobj 1970-01-01 01:00:00.000000000 +0100 +++ new/tlpkg/tlpobj/block.tlpobj 2010-06-10 18:20:37.000000000 +0200 @@ -0,0 +1,15 @@ +name block +category Package +revision 17209 +shortdesc A block letter style for the letter class. +relocated 1 +longdesc A style file for use with the letter class that overwrites the +longdesc \opening and \closing macros so that letters can be styled with +longdesc the block letter style instead of the default style. Thus, the +longdesc return address, the closing, and the signature appear flushed +longdesc on the left margin. +runfiles size=1 + RELOC/tex/latex/block/block.sty +catalogue-ctan /macros/latex/contrib/block +catalogue-date 2010-02-26 11:17:49 +0100 +catalogue-license pd diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/tlpkg/tlpobj/clock.tlpobj new/tlpkg/tlpobj/clock.tlpobj --- old/tlpkg/tlpobj/clock.tlpobj 2010-06-10 18:22:19.000000000 +0200 +++ new/tlpkg/tlpobj/clock.tlpobj 1970-01-01 01:00:00.000000000 +0100 @@ -1,18 +0,0 @@ -name clock -category Package -revision 15878 -shortdesc Graphical and textual clocks for TeX and LaTeX. -relocated 1 -longdesc Features graphical clocks (with a classical 12h dial and two -longdesc hands) and text clocks (in 24h format) which can show system -longdesc time or any time the user desires. Works with both TeX and -longdesc LaTeX. The clock faces (appearances of the dial) are easily -longdesc expandable; the default uses a custom MetaFont font. -runfiles size=4 - RELOC/fonts/source/public/clock/clock.mf - RELOC/fonts/tfm/public/clock/clock.tfm - RELOC/tex/latex/clock/clock.sty - RELOC/tex/latex/clock/clock.tex -catalogue-ctan /macros/latex/contrib/clock -catalogue-date 2008-04-19 23:05:28 +0200 -catalogue-license other-free