commit pcsc-ccid for openSUSE:Factory
![](https://seccdn.libravatar.org/avatar/e2145bc5cf53dda95c308a3c75e8fef3.jpg?s=120&d=mm&r=g)
Hello community,
here is the log from the commit of package pcsc-ccid for openSUSE:Factory checked in at 2015-08-05 19:17:22
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Comparing /work/SRC/openSUSE:Factory/pcsc-ccid (Old)
and /work/SRC/openSUSE:Factory/.pcsc-ccid.new (New)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "pcsc-ccid"
Changes:
--------
--- /work/SRC/openSUSE:Factory/pcsc-ccid/pcsc-ccid.changes 2015-05-15 07:44:29.000000000 +0200
+++ /work/SRC/openSUSE:Factory/.pcsc-ccid.new/pcsc-ccid.changes 2015-08-05 19:17:22.000000000 +0200
@@ -1,0 +2,22 @@
+Wed Aug 5 14:09:02 UTC 2015 - wr@rosenauer.org
+
+- Updated to version 1.4.20
+ * Add support of
+ ACS ACR1251 Dual Reader
+ Access IS NFC Smart Module
+ BIFIT iToken
+ BLUTRONICS BLUDRIVE II CCID (idProduct: 0x1079)
+ Generic MultiCard Device
+ NXP Pegoda 2 N
+ SafeNet eToken 5100
+ SafeNet eToken 7300
+ Yubico Yubikey 4 CCID
+ Yubico Yubikey 4 OTP+CCID
+ Yubico Yubikey 4 OTP+U2F+CCID
+ Yubico Yubikey 4 U2F+CCID
+ * Depends on libusb version 1.0.9 instead of 1.0.8
+ * The O2 Micro Oz776 reader only supports 9600 bps
+- spec file cleanup
+- remove pgp validation from build (now handled via OBS)
+
+-------------------------------------------------------------------
Old:
----
ccid-1.4.19.tar.bz2
ccid-1.4.19.tar.bz2.asc
New:
----
ccid-1.4.20.tar.bz2
ccid-1.4.20.tar.bz2.asc
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Other differences:
------------------
++++++ pcsc-ccid.spec ++++++
--- /var/tmp/diff_new_pack.Jv4Co1/_old 2015-08-05 19:17:23.000000000 +0200
+++ /var/tmp/diff_new_pack.Jv4Co1/_new 2015-08-05 19:17:23.000000000 +0200
@@ -17,32 +17,28 @@
%if %( echo `rpm -q --queryformat %%{version} udev` ) > 190
-%define _udevrulesdir /usr/lib/udev/rules.d
+%define _udevrulesdir %{_libexecdir}/udev/rules.d
%else
%define _udevrulesdir /lib/udev/rules.d
%endif
Name: pcsc-ccid
%define _name ccid
-BuildRequires: automake
-BuildRequires: libusb-1_0-devel
-BuildRequires: pcsc-lite-devel
-BuildRequires: pkg-config
-BuildRequires: udev
-%if %suse_version > 1220
-BuildRequires: gpg-offline
-%endif
-Version: 1.4.19
+Version: 1.4.20
Release: 0
-Url: http://pcsclite.alioth.debian.org/ccid.html
Summary: PCSC Driver for CCID Based Smart Card Readers and GemPC Twin Serial Reader
License: LGPL-2.1+
Group: Productivity/Security
+Url: http://pcsclite.alioth.debian.org/ccid.html
Source: %{_name}-%{version}.tar.bz2
Source1: %{name}-rpmlintrc
Source2: %{_name}-%{version}.tar.bz2.asc
Source3: %{name}.keyring
-BuildRoot: %{_tmppath}/%{name}-%{version}-build
+BuildRequires: automake
+BuildRequires: libusb-1_0-devel
+BuildRequires: pcsc-lite-devel
+BuildRequires: pkg-config
+BuildRequires: udev
# openSUSE package pcsc-lite 1.6.6 is the first one which creates the scard UID and GID:
Requires: pcsc-lite >= 1.6.6
%define ifddir %(pkg-config libpcsclite --variable=usbdropdir)
@@ -58,6 +54,7 @@
Enhances: modalias(usb:v0D46p4081d*dc*dsc*dp*ic*isc*ip*)
# Other supported devices:
Enhances: %USBDRIVERS
+BuildRoot: %{_tmppath}/%{name}-%{version}-build
%description
This package contains a generic USB CCID (Chip/Smart Card Interface
@@ -68,9 +65,6 @@
%prep
-%if 0%{?gpg_verify:1}
-%gpg_verify %{S:2}
-%endif
%setup -q -n %{_name}-%{version}
cp -a src/openct/LICENSE LICENSE.openct
cp -a src/towitoko/README README.towitoko
@@ -81,16 +75,13 @@
%configure\
--enable-twinserial \
--enable-serialconfdir=%{_sysconfdir}/reader.conf.d/
-make %{?jobs:-j%jobs}
+make %{?_smp_mflags}
%install
-%makeinstall
+make DESTDIR=%{buildroot} install %{?_smp_mflags}
# Copied elsewhere:
-mkdir -p $RPM_BUILD_ROOT/%{_udevrulesdir}
-sed 's:GROUP="pcscd":GROUP="scard":'
participants (1)
-
root@hilbert.suse.de