Hello community,
here is the log from the commit of package xrefresh for openSUSE:Factory checked in at 2018-04-07 20:50:07
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Comparing /work/SRC/openSUSE:Factory/xrefresh (Old)
and /work/SRC/openSUSE:Factory/.xrefresh.new (New)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "xrefresh"
Sat Apr 7 20:50:07 2018 rev:7 rq:593604 version:1.0.6
Changes:
--------
--- /work/SRC/openSUSE:Factory/xrefresh/xrefresh.changes 2013-06-25 14:47:35.000000000 +0200
+++ /work/SRC/openSUSE:Factory/.xrefresh.new/xrefresh.changes 2018-04-07 20:50:10.881321958 +0200
@@ -1,0 +2,12 @@
+Wed Apr 4 16:34:01 UTC 2018 - sndirsch@suse.com
+
+- Update to version 1.0.6
+ * configure: Drop AM_MAINTAINER_MODE
+ * autogen.sh: Honor NOCONFIGURE=1
+ * Print which option was in error along with usage message
+ * Add -version option to print program version
+ * autogen.sh: use quoted string variables
+ * autogen: add default patch prefix
+ * autogen.sh: use exec instead of waiting for configure to finish
+
+-------------------------------------------------------------------
Old:
----
xrefresh-1.0.5.tar.bz2
New:
----
xrefresh-1.0.6.tar.bz2
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Other differences:
------------------
++++++ xrefresh.spec ++++++
--- /var/tmp/diff_new_pack.DdZx6N/_old 2018-04-07 20:50:11.485300100 +0200
+++ /var/tmp/diff_new_pack.DdZx6N/_new 2018-04-07 20:50:11.485300100 +0200
@@ -1,7 +1,7 @@
#
# spec file for package xrefresh
#
-# Copyright (c) 2013 SUSE LINUX Products GmbH, Nuernberg, Germany.
+# Copyright (c) 2018 SUSE LINUX GmbH, Nuernberg, Germany.
#
# All modifications and additions to the file contributed by third parties
# remain the property of their copyright owners, unless otherwise agreed
@@ -17,7 +17,7 @@
Name: xrefresh
-Version: 1.0.5
+Version: 1.0.6
Release: 0
Summary: Utility to refresh all or part of an X screen
License: MIT
++++++ xrefresh-1.0.5.tar.bz2 -> xrefresh-1.0.6.tar.bz2 ++++++
++++ 12333 lines of diff (skipped)
++++ retrying with extended exclude list
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xrefresh-1.0.5/ChangeLog new/xrefresh-1.0.6/ChangeLog
--- old/xrefresh-1.0.5/ChangeLog 2013-05-18 03:20:35.000000000 +0200
+++ new/xrefresh-1.0.6/ChangeLog 2018-03-10 05:14:27.000000000 +0100
@@ -1,3 +1,77 @@
+commit 3900110b0ca575030b9d097349e6907ac28fe7fb
+Author: Alan Coopersmith
+Date: Fri Mar 9 20:13:34 2018 -0800
+
+ xrefresh 1.0.6
+
+ Signed-off-by: Alan Coopersmith
+
+commit bccbd1905ac761c48bd3dac7e53d5bb290e066b1
+Author: Mihail Konev
+Date: Thu Jan 26 14:00:21 2017 +1000
+
+ autogen: add default patch prefix
+
+ Signed-off-by: Mihail Konev
+
+commit 42d40434f3203d173fef130cb2d73a272fa83449
+Author: Emil Velikov
+Date: Mon Mar 9 12:00:52 2015 +0000
+
+ autogen.sh: use quoted string variables
+
+ Place quotes around the $srcdir, $ORIGDIR and $0 variables to prevent
+ fall-outs, when they contain space.
+
+ Signed-off-by: Emil Velikov
+ Reviewed-by: Peter Hutterer
+ Signed-off-by: Peter Hutterer
+
+commit 1300015e5b6c598826a363a84091821222c8cd6c
+Author: Peter Hutterer
+Date: Tue Jan 24 10:32:07 2017 +1000
+
+ autogen.sh: use exec instead of waiting for configure to finish
+
+ Syncs the invocation of configure with the one from the server.
+
+ Signed-off-by: Peter Hutterer
+ Reviewed-by: Emil Velikov
+
+commit 07cbc124b54b866fa7ab40444d22bdd9018fc5b3
+Author: Alan Coopersmith
+Date: Tue Jun 3 22:58:53 2014 -0700
+
+ Add -version option to print program version
+
+ Signed-off-by: Alan Coopersmith
+
+commit b02dd8658fe8c70a77f9134cd2258f423d30e6fe
+Author: Alan Coopersmith
+Date: Tue Jun 3 22:55:51 2014 -0700
+
+ Print which option was in error along with usage message
+
+ Signed-off-by: Alan Coopersmith
+
+commit 2bd2999a3e10e06ad92221dbefeac3be3d437f4f
+Author: Alan Coopersmith
+Date: Tue Jun 3 22:47:06 2014 -0700
+
+ autogen.sh: Honor NOCONFIGURE=1
+
+ See http://people.gnome.org/~walters/docs/build-api.txt
+
+ Signed-off-by: Alan Coopersmith
+
+commit 0716f5bb4d9dce062edc6eb335c15666a4129d78
+Author: Alan Coopersmith
+Date: Tue Jun 3 22:47:06 2014 -0700
+
+ configure: Drop AM_MAINTAINER_MODE
+
+ Signed-off-by: Alan Coopersmith
+
commit 2c08f5dee8b3f2d2da9db8e3c1d4593a66db401e
Author: Alan Coopersmith
Date: Fri May 17 18:20:13 2013 -0700
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xrefresh-1.0.5/INSTALL new/xrefresh-1.0.6/INSTALL
--- old/xrefresh-1.0.5/INSTALL 2013-05-18 03:20:35.000000000 +0200
+++ new/xrefresh-1.0.6/INSTALL 2018-03-10 05:14:27.000000000 +0100
@@ -1,11 +1,13 @@
Installation Instructions
*************************
-Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
-2006, 2007, 2008 Free Software Foundation, Inc.
+Copyright (C) 1994-1996, 1999-2002, 2004-2011 Free Software Foundation,
+Inc.
- This file is free documentation; the Free Software Foundation gives
-unlimited permission to copy, distribute and modify it.
+ Copying and distribution of this file, with or without modification,
+are permitted in any medium without royalty provided the copyright
+notice and this notice are preserved. This file is offered as-is,
+without warranty of any kind.
Basic Installation
==================
@@ -13,7 +15,11 @@
Briefly, the shell commands `./configure; make; make install' should
configure, build, and install this package. The following
more-detailed instructions are generic; see the `README' file for
-instructions specific to this package.
+instructions specific to this package. Some packages provide this
+`INSTALL' file but do not implement all of the features documented
+below. The lack of an optional feature in a given package is not
+necessarily a bug. More recommendations for GNU packages can be found
+in *note Makefile Conventions: (standards)Makefile Conventions.
The `configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation. It uses
@@ -42,7 +48,7 @@
you want to change it or regenerate `configure' using a newer version
of `autoconf'.
-The simplest way to compile this package is:
+ The simplest way to compile this package is:
1. `cd' to the directory containing the package's source code and type
`./configure' to configure the package for your system.
@@ -53,12 +59,22 @@
2. Type `make' to compile the package.
3. Optionally, type `make check' to run any self-tests that come with
- the package.
+ the package, generally using the just-built uninstalled binaries.
4. Type `make install' to install the programs and any data files and
- documentation.
+ documentation. When installing into a prefix owned by root, it is
+ recommended that the package be configured and built as a regular
+ user, and only the `make install' phase executed with root
+ privileges.
+
+ 5. Optionally, type `make installcheck' to repeat any self-tests, but
+ this time using the binaries in their final installed location.
+ This target does not install anything. Running this target as a
+ regular user, particularly if the prior `make install' required
+ root privileges, verifies that the installation completed
+ correctly.
- 5. You can remove the program binaries and object files from the
+ 6. You can remove the program binaries and object files from the
source code directory by typing `make clean'. To also remove the
files that `configure' created (so you can compile the package for
a different kind of computer), type `make distclean'. There is
@@ -67,8 +83,15 @@
all sorts of other programs in order to regenerate files that came
with the distribution.
- 6. Often, you can also type `make uninstall' to remove the installed
- files again.
+ 7. Often, you can also type `make uninstall' to remove the installed
+ files again. In practice, not all packages have tested that
+ uninstallation works correctly, even though it is required by the
+ GNU Coding Standards.
+
+ 8. Some packages, particularly those that use Automake, provide `make
+ distcheck', which can by used by developers to test that all other
+ targets like `make install' and `make uninstall' work correctly.
+ This target is generally not run by end users.
Compilers and Options
=====================
@@ -93,7 +116,8 @@
own directory. To do this, you can use GNU `make'. `cd' to the
directory where you want the object files and executables to go and run
the `configure' script. `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'.
+source code in the directory that `configure' is in and in `..'. This
+is known as a "VPATH" build.
With a non-GNU `make', it is safer to compile the package for one
architecture at a time in the source code directory. After you have
@@ -120,7 +144,8 @@
By default, `make install' installs the package's commands under
`/usr/local/bin', include files under `/usr/local/include', etc. You
can specify an installation prefix other than `/usr/local' by giving
-`configure' the option `--prefix=PREFIX'.
+`configure' the option `--prefix=PREFIX', where PREFIX must be an
+absolute file name.
You can specify separate installation prefixes for
architecture-specific files and architecture-independent files. If you
@@ -131,15 +156,46 @@
In addition, if you use an unusual directory layout you can give
options like `--bindir=DIR' to specify different values for particular
kinds of files. Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them.
+you can set and what kinds of files go in them. In general, the
+default for these options is expressed in terms of `${prefix}', so that
+specifying just `--prefix' will affect all of the other directory
+specifications that were not explicitly provided.
+
+ The most portable way to affect installation locations is to pass the
+correct locations to `configure'; however, many packages provide one or
+both of the following shortcuts of passing variable assignments to the
+`make install' command line to change installation locations without
+having to reconfigure or recompile.
+
+ The first method involves providing an override variable for each
+affected directory. For example, `make install
+prefix=/alternate/directory' will choose an alternate location for all
+directory configuration variables that were expressed in terms of
+`${prefix}'. Any directories that were specified during `configure',
+but not in terms of `${prefix}', must each be overridden at install
+time for the entire installation to be relocated. The approach of
+makefile variable overrides for each directory variable is required by
+the GNU Coding Standards, and ideally causes no recompilation.
+However, some platforms have known limitations with the semantics of
+shared libraries that end up requiring recompilation when using this
+method, particularly noticeable in packages that use GNU Libtool.
+
+ The second method involves providing the `DESTDIR' variable. For
+example, `make install DESTDIR=/alternate/directory' will prepend
+`/alternate/directory' before all installation names. The approach of
+`DESTDIR' overrides is not required by the GNU Coding Standards, and
+does not work on platforms that have drive letters. On the other hand,
+it does better at avoiding recompilation issues, and works well even
+when some directory options were not specified in terms of `${prefix}'
+at `configure' time.
+
+Optional Features
+=================
If the package supports it, you can cause programs to be installed
with an extra prefix or suffix on their names by giving `configure' the
option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
-Optional Features
-=================
-
Some packages pay attention to `--enable-FEATURE' options to
`configure', where FEATURE indicates an optional part of the package.
They may also pay attention to `--with-PACKAGE' options, where PACKAGE
@@ -152,6 +208,13 @@
you can use the `configure' options `--x-includes=DIR' and
`--x-libraries=DIR' to specify their locations.
+ Some packages offer the ability to configure how verbose the
+execution of `make' will be. For these packages, running `./configure
+--enable-silent-rules' sets the default to minimal output, which can be
+overridden with `make V=1'; while running `./configure
+--disable-silent-rules' sets the default to verbose, which can be
+overridden with `make V=0'.
+
Particular systems
==================
@@ -159,10 +222,15 @@
CC is not installed, it is recommended to use the following options in
order to use an ANSI C compiler:
- ./configure CC="cc -Ae"
+ ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
and if that doesn't work, install pre-built binaries of GCC for HP-UX.
+ HP-UX `make' updates targets which have the same time stamps as
+their prerequisites, which makes it generally unusable when shipped
+generated files such as `configure' are involved. Use GNU `make'
+instead.
+
On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
parse its `' header file. The option `-nodtk' can be used as
a workaround. If GNU CC is not installed, it is therefore recommended
@@ -174,6 +242,16 @@
./configure CC="cc -nodtk"
+ On Solaris, don't put `/usr/ucb' early in your `PATH'. This
+directory contains several dysfunctional programs; working variants of
+these programs are available in `/usr/bin'. So, if you need `/usr/ucb'
+in your `PATH', put it _after_ `/usr/bin'.
+
+ On Haiku, software installed for all users goes in `/boot/common',
+not `/usr/local'. It is recommended to use the following options:
+
+ ./configure --prefix=/boot/common
+
Specifying the System Type
==========================
@@ -189,7 +267,8 @@
where SYSTEM can have one of these forms:
- OS KERNEL-OS
+ OS
+ KERNEL-OS
See the file `config.sub' for the possible values of each field. If
`config.sub' isn't included in this package, then this package doesn't
@@ -277,7 +356,7 @@
`configure' can determine that directory automatically.
`--prefix=DIR'
- Use DIR as the installation prefix. *Note Installation Names::
+ Use DIR as the installation prefix. *note Installation Names::
for more details, including other options available for fine-tuning
the installation locations.
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xrefresh-1.0.5/compile new/xrefresh-1.0.6/compile
--- old/xrefresh-1.0.5/compile 1970-01-01 01:00:00.000000000 +0100
+++ new/xrefresh-1.0.6/compile 2018-03-10 05:14:22.000000000 +0100
@@ -0,0 +1,347 @@
+#! /bin/sh
+# Wrapper for compilers which do not understand '-c -o'.
+
+scriptversion=2012-10-14.11; # UTC
+
+# Copyright (C) 1999-2014 Free Software Foundation, Inc.
+# Written by Tom Tromey .
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see http://www.gnu.org/licenses/.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to or send patches to
+# .
+
+nl='
+'
+
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent tools from complaining about whitespace usage.
+IFS=" "" $nl"
+
+file_conv=
+
+# func_file_conv build_file lazy
+# Convert a $build file to $host form and store it in $file
+# Currently only supports Windows hosts. If the determined conversion
+# type is listed in (the comma separated) LAZY, no conversion will
+# take place.
+func_file_conv ()
+{
+ file=$1
+ case $file in
+ / | /[!/]*) # absolute file, and not a UNC file
+ if test -z "$file_conv"; then
+ # lazily determine how to convert abs files
+ case `uname -s` in
+ MINGW*)
+ file_conv=mingw
+ ;;
+ CYGWIN*)
+ file_conv=cygwin
+ ;;
+ *)
+ file_conv=wine
+ ;;
+ esac
+ fi
+ case $file_conv/,$2, in
+ *,$file_conv,*)
+ ;;
+ mingw/*)
+ file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
+ ;;
+ cygwin/*)
+ file=`cygpath -m "$file" || echo "$file"`
+ ;;
+ wine/*)
+ file=`winepath -w "$file" || echo "$file"`
+ ;;
+ esac
+ ;;
+ esac
+}
+
+# func_cl_dashL linkdir
+# Make cl look for libraries in LINKDIR
+func_cl_dashL ()
+{
+ func_file_conv "$1"
+ if test -z "$lib_path"; then
+ lib_path=$file
+ else
+ lib_path="$lib_path;$file"
+ fi
+ linker_opts="$linker_opts -LIBPATH:$file"
+}
+
+# func_cl_dashl library
+# Do a library search-path lookup for cl
+func_cl_dashl ()
+{
+ lib=$1
+ found=no
+ save_IFS=$IFS
+ IFS=';'
+ for dir in $lib_path $LIB
+ do
+ IFS=$save_IFS
+ if $shared && test -f "$dir/$lib.dll.lib"; then
+ found=yes
+ lib=$dir/$lib.dll.lib
+ break
+ fi
+ if test -f "$dir/$lib.lib"; then
+ found=yes
+ lib=$dir/$lib.lib
+ break
+ fi
+ if test -f "$dir/lib$lib.a"; then
+ found=yes
+ lib=$dir/lib$lib.a
+ break
+ fi
+ done
+ IFS=$save_IFS
+
+ if test "$found" != yes; then
+ lib=$lib.lib
+ fi
+}
+
+# func_cl_wrapper cl arg...
+# Adjust compile command to suit cl
+func_cl_wrapper ()
+{
+ # Assume a capable shell
+ lib_path=
+ shared=:
+ linker_opts=
+ for arg
+ do
+ if test -n "$eat"; then
+ eat=
+ else
+ case $1 in
+ -o)
+ # configure might choose to run compile as 'compile cc -o foo foo.c'.
+ eat=1
+ case $2 in
+ *.o | *.[oO][bB][jJ])
+ func_file_conv "$2"
+ set x "$@" -Fo"$file"
+ shift
+ ;;
+ *)
+ func_file_conv "$2"
+ set x "$@" -Fe"$file"
+ shift
+ ;;
+ esac
+ ;;
+ -I)
+ eat=1
+ func_file_conv "$2" mingw
+ set x "$@" -I"$file"
+ shift
+ ;;
+ -I*)
+ func_file_conv "${1#-I}" mingw
+ set x "$@" -I"$file"
+ shift
+ ;;
+ -l)
+ eat=1
+ func_cl_dashl "$2"
+ set x "$@" "$lib"
+ shift
+ ;;
+ -l*)
+ func_cl_dashl "${1#-l}"
+ set x "$@" "$lib"
+ shift
+ ;;
+ -L)
+ eat=1
+ func_cl_dashL "$2"
+ ;;
+ -L*)
+ func_cl_dashL "${1#-L}"
+ ;;
+ -static)
+ shared=false
+ ;;
+ -Wl,*)
+ arg=${1#-Wl,}
+ save_ifs="$IFS"; IFS=','
+ for flag in $arg; do
+ IFS="$save_ifs"
+ linker_opts="$linker_opts $flag"
+ done
+ IFS="$save_ifs"
+ ;;
+ -Xlinker)
+ eat=1
+ linker_opts="$linker_opts $2"
+ ;;
+ -*)
+ set x "$@" "$1"
+ shift
+ ;;
+ *.cc | *.CC | *.cxx | *.CXX | *.[cC]++)
+ func_file_conv "$1"
+ set x "$@" -Tp"$file"
+ shift
+ ;;
+ *.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO])
+ func_file_conv "$1" mingw
+ set x "$@" "$file"
+ shift
+ ;;
+ *)
+ set x "$@" "$1"
+ shift
+ ;;
+ esac
+ fi
+ shift
+ done
+ if test -n "$linker_opts"; then
+ linker_opts="-link$linker_opts"
+ fi
+ exec "$@" $linker_opts
+ exit 1
+}
+
+eat=
+
+case $1 in
+ '')
+ echo "$0: No command. Try '$0 --help' for more information." 1>&2
+ exit 1;
+ ;;
+ -h | --h*)
+ cat <<\EOF
+Usage: compile [--help] [--version] PROGRAM [ARGS]
+
+Wrapper for compilers which do not understand '-c -o'.
+Remove '-o dest.o' from ARGS, run PROGRAM with the remaining
+arguments, and rename the output as expected.
+
+If you are trying to build a whole package this is not the
+right script to run: please start by reading the file 'INSTALL'.
+
+Report bugs to .
+EOF
+ exit $?
+ ;;
+ -v | --v*)
+ echo "compile $scriptversion"
+ exit $?
+ ;;
+ cl | *[/\\]cl | cl.exe | *[/\\]cl.exe )
+ func_cl_wrapper "$@" # Doesn't return...
+ ;;
+esac
+
+ofile=
+cfile=
+
+for arg
+do
+ if test -n "$eat"; then
+ eat=
+ else
+ case $1 in
+ -o)
+ # configure might choose to run compile as 'compile cc -o foo foo.c'.
+ # So we strip '-o arg' only if arg is an object.
+ eat=1
+ case $2 in
+ *.o | *.obj)
+ ofile=$2
+ ;;
+ *)
+ set x "$@" -o "$2"
+ shift
+ ;;
+ esac
+ ;;
+ *.c)
+ cfile=$1
+ set x "$@" "$1"
+ shift
+ ;;
+ *)
+ set x "$@" "$1"
+ shift
+ ;;
+ esac
+ fi
+ shift
+done
+
+if test -z "$ofile" || test -z "$cfile"; then
+ # If no '-o' option was seen then we might have been invoked from a
+ # pattern rule where we don't need one. That is ok -- this is a
+ # normal compilation that the losing compiler can handle. If no
+ # '.c' file was seen then we are probably linking. That is also
+ # ok.
+ exec "$@"
+fi
+
+# Name of file we expect compiler to create.
+cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'`
+
+# Create the lock directory.
+# Note: use '[/\\:.-]' here to ensure that we don't use the same name
+# that we are using for the .o file. Also, base the name on the expected
+# object file name, since that is what matters with a parallel build.
+lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d
+while true; do
+ if mkdir "$lockdir" >/dev/null 2>&1; then
+ break
+ fi
+ sleep 1
+done
+# FIXME: race condition here if user kills between mkdir and trap.
+trap "rmdir '$lockdir'; exit 1" 1 2 15
+
+# Run the compile.
+"$@"
+ret=$?
+
+if test -f "$cofile"; then
+ test "$cofile" = "$ofile" || mv "$cofile" "$ofile"
+elif test -f "${cofile}bj"; then
+ test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile"
+fi
+
+rmdir "$lockdir"
+exit $ret
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xrefresh-1.0.5/configure.ac new/xrefresh-1.0.6/configure.ac
--- old/xrefresh-1.0.5/configure.ac 2013-05-18 03:20:19.000000000 +0200
+++ new/xrefresh-1.0.6/configure.ac 2018-03-10 05:14:18.000000000 +0100
@@ -23,7 +23,7 @@
# Initialize Autoconf
AC_PREREQ([2.60])
-AC_INIT([xrefresh], [1.0.5],
+AC_INIT([xrefresh], [1.0.6],
[https://bugs.freedesktop.org/enter_bug.cgi?product=xorg], [xrefresh])
AC_CONFIG_SRCDIR([Makefile.am])
AC_CONFIG_HEADERS([config.h])
@@ -31,7 +31,6 @@
# Initialize Automake
AM_INIT_AUTOMAKE([foreign dist-bzip2])
-AM_MAINTAINER_MODE
# Require X.Org macros 1.8 or later for MAN_SUBSTS set by XORG_MANPAGE_SECTIONS
m4_ifndef([XORG_MACROS_VERSION],
@@ -42,7 +41,7 @@
AC_CHECK_FUNCS([strcasecmp])
# Checks for pkg-config packages
-PKG_CHECK_MODULES(XREFRESH, [x11 xproto >= 7.0.17])
+PKG_CHECK_MODULES(XREFRESH, [x11 xproto >= 7.0.25])
AC_CONFIG_FILES([
Makefile
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xrefresh-1.0.5/man/xrefresh.man new/xrefresh-1.0.6/man/xrefresh.man
--- old/xrefresh-1.0.5/man/xrefresh.man 2013-05-18 03:20:19.000000000 +0200
+++ new/xrefresh-1.0.6/man/xrefresh.man 2018-03-10 05:14:18.000000000 +0100
@@ -74,6 +74,10 @@
.B \-display \fIdisplay\fP
This argument allows you to specify the server and screen to
refresh; see \fIX(__miscmansuffix__)\fP.
+.PP
+.TP 10
+.B \-version
+This argument prints the program version and exits.
.SH X DEFAULTS
The
.I xrefresh
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xrefresh-1.0.5/missing new/xrefresh-1.0.6/missing
--- old/xrefresh-1.0.5/missing 2013-05-18 03:20:25.000000000 +0200
+++ new/xrefresh-1.0.6/missing 2018-03-10 05:14:22.000000000 +0100
@@ -1,9 +1,9 @@
#! /bin/sh
# Common wrapper for a few potentially missing GNU programs.
-scriptversion=2012-06-26.16; # UTC
+scriptversion=2013-10-28.13; # UTC
-# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+# Copyright (C) 1996-2014 Free Software Foundation, Inc.
# Originally written by Fran,cois Pinard , 1996.
# This program is free software; you can redistribute it and/or modify
@@ -160,7 +160,7 @@
;;
autom4te*)
echo "You might have modified some maintainer files that require"
- echo "the 'automa4te' program to be rebuilt."
+ echo "the 'autom4te' program to be rebuilt."
program_details 'autom4te'
;;
bison*|yacc*)
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xrefresh-1.0.5/xrefresh.c new/xrefresh-1.0.6/xrefresh.c
--- old/xrefresh-1.0.5/xrefresh.c 2013-05-18 03:20:19.000000000 +0200
+++ new/xrefresh-1.0.6/xrefresh.c 2018-03-10 05:14:18.000000000 +0100
@@ -69,7 +69,7 @@
static char *ProgramName;
-static void _X_NORETURN
+static void _X_NORETURN _X_COLD
Syntax(void)
{
fprintf (stderr, "usage: %s [-options] [geometry] [display]\n\n%s",
@@ -81,11 +81,27 @@
" -white use WhitePixel\n"
" -solid colorname use the color indicated\n"
" -root use the root background\n"
- " -none no background in window\n");
+ " -none no background in window\n"
+ " -version print program version\n"
+ );
fprintf (stderr, "\nThe default is: %s -none\n\n", ProgramName);
exit (1);
}
+static void _X_NORETURN _X_COLD
+missing_arg(const char *arg)
+{
+ fprintf (stderr, "%s: %s requires an argument\n\n", ProgramName, arg);
+ Syntax ();
+}
+
+static void _X_NORETURN _X_COLD
+unknown_arg(const char *arg)
+{
+ fprintf (stderr, "%s: unrecognized argument %s\n\n", ProgramName, arg);
+ Syntax ();
+}
+
/*
* The following parses options that should be yes or no; it returns -1, 0, 1
* for error, no, yes.
@@ -188,11 +204,11 @@
if (arg[0] == '-') {
if (isabbreviation ("-display", arg, 2)) {
- if (++i >= argc) Syntax ();
+ if (++i >= argc) missing_arg (arg);
displayname = argv[i];
continue;
} else if (isabbreviation ("-geometry", arg, 2)) {
- if (++i >= argc) Syntax ();
+ if (++i >= argc) missing_arg (arg);
geom = argv[i];
continue;
} else if (isabbreviation ("-black", arg, 2)) {
@@ -202,7 +218,7 @@
action = doWhite;
continue;
} else if (isabbreviation ("-solid", arg, 2)) {
- if (++i >= argc) Syntax ();
+ if (++i >= argc) missing_arg (arg);
solidcolor = argv[i];
action = doSolid;
continue;
@@ -212,12 +228,15 @@
} else if (isabbreviation ("-root", arg, 2)) {
action = doRoot;
continue;
+ } else if (isabbreviation ("-version", arg, 1)) {
+ puts(PACKAGE_STRING);
+ exit(0);
} else
- Syntax ();
+ unknown_arg (arg);
} else if (arg[0] == '=') /* obsolete */
geom = arg;
else
- Syntax ();
+ unknown_arg (arg);
}
if ((dpy = XOpenDisplay(displayname)) == NULL) {