commit libgphoto2 for openSUSE:Factory
Hello community, here is the log from the commit of package libgphoto2 for openSUSE:Factory checked in at 2013-05-06 10:10:02 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/libgphoto2 (Old) and /work/SRC/openSUSE:Factory/.libgphoto2.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "libgphoto2" Changes: -------- --- /work/SRC/openSUSE:Factory/libgphoto2/libgphoto2.changes 2013-04-17 07:13:27.000000000 +0200 +++ /work/SRC/openSUSE:Factory/.libgphoto2.new/libgphoto2.changes 2013-05-06 10:10:04.000000000 +0200 @@ -1,0 +2,51 @@ +Sun May 5 20:54:22 UTC 2013 - meissner@suse.com + +- Updated to 2.5.2 + ptp2: + * Fixed Raspberry Pi and USB 3.0 "connect only once" problem. + * Experimental Olympus E-series (not Pen) remote control support. Try in "Control" mode. + * Nikon DSLR: real movie capture! (use --set-config movie=1/0 and --wait-event) + * New ids: + Sony: DSC-A900, SLT-A350, DSC-RX1, HX300, NEX-3N + Nikon Coolpix: P80, L820, S9500, S620, P520, S2500, S2600 + Nikon Coolpix A + Nikon DSLR: D2Xs, D4, D7100 + Nikon J2 + Canon Powershot: S100, A1300IS, A2300IS, + Canon EOS: 700D, 100D + Fuji FinePix: H20EXR, X20 + Samsung: NX1000, EK-GC100 + Also various MTP device ids merged from libmtp. + * ptpip: major/minor number was switched in init packet. + * Nikon DSLR: out of focus during capture fixed, various bugfixes + * Nikon "controlmode" config for unlocking the camera. + * Canon DSLR: "keepdeviceon" pinging in get_config, liveview + * Canon thumbnail retrieval fixed. + * Lots of work on getting Olympus E-series DSLRs in Control mode + to run. + + canon: + * wait-for-event: handle when camera goes offline during waiting. + * fixed mtime 0 (Jan 1 1970) issue when downloading files and using --filename + + sierra: + * Fixed the Nikon Coolpix 4300 and 2500 USB over SCSI capture mode. + * Ignore register 4 read errors after capture as Nikon does not supply them. + * added commented code on how to switch the Coolpix 2500 to RAW DIAG mode. + + libgphoto2_port: + * gp_port_reset functionality to do a port reset. + + libgphoto2_port/usbscsi: + * Use timeout supplied by driver, not hardcoded 1.5 seconds (fixes Nikon sierra capture). + + translations: + * updated ukrainian, finish, dutch, polish, russian, french, vietnamese, german + + build: + * specify lots of _BSD_SOURCE et.al. to make the strict MacOS ports + build happier. Might break non Linux platforms, please report this. + * libxml2 needed for Olympus E series capture support. + * cleaned up AM_CPPFLAGS/CPPFLAGS usage, do not use both of them together. + +------------------------------------------------------------------- Old: ---- libgphoto2-2.5.1.1.tar.bz2 New: ---- libgphoto2-2.5.2.tar.bz2 libgphoto2-2.5.2.tar.bz2.asc libgphoto2.keyring ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ libgphoto2.spec ++++++ --- /var/tmp/diff_new_pack.5sPZd8/_old 2013-05-06 10:10:05.000000000 +0200 +++ /var/tmp/diff_new_pack.5sPZd8/_new 2013-05-06 10:10:05.000000000 +0200 @@ -47,10 +47,15 @@ Summary: A Digital Camera Library License: LGPL-2.1+ Group: Hardware/Camera -Version: 2.5.1.1 +Version: 2.5.2 Release: 0 Source0: http://downloads.sourceforge.net/project/gphoto/libgphoto/%{version}/%{name}-%{version}.tar.bz2 -Source1: baselibs.conf +Source1: http://downloads.sourceforge.net/project/gphoto/libgphoto/%{version}/%{name}-%{version}.tar.bz2.asc +Source2: %name.keyring +Source3: baselibs.conf +%if 0%{?suse_version} > 1220 +BuildRequires: gpg-offline +%endif BuildRoot: %{_tmppath}/%{name}-%{version}-build Recommends: %{name}-%{major}-lang = %{version} @@ -72,7 +77,7 @@ local hard drive. It does not support digital cameras based on the USB storage protocol. Those can be mounted by Linux directly. -As of this time, gPhoto supports around 1200 cameras, listed on: +As of this time, gPhoto supports around 1700 cameras, listed on: http://gphoto.org/proj/libgphoto2/support.php @@ -84,9 +89,9 @@ gPhoto (GNU Photo) is a set of libraries for previewing, retrieving, and capturing images from a range of supported digital cameras to your local hard drive. It does not support digital cameras based on the USB -storage protocol. Those can be mounted by Linux directly. +storage protocol as those can be mounted by Linux directly. -As of this time, gPhoto supports around 1200 cameras, listed on: +As of this time, gPhoto supports around 1700 cameras, listed on: http://gphoto.org/proj/libgphoto2/support.php @@ -102,7 +107,11 @@ These are its development libraries and headers. %lang_package -n libgphoto2-%{major} + %prep +%if 0%{?suse_version} > 1220 +%gpg_verify %{S:1} +%endif %setup -q %build ++++++ libgphoto2-2.5.1.1.tar.bz2 -> libgphoto2-2.5.2.tar.bz2 ++++++ /work/SRC/openSUSE:Factory/libgphoto2/libgphoto2-2.5.1.1.tar.bz2 /work/SRC/openSUSE:Factory/.libgphoto2.new/libgphoto2-2.5.2.tar.bz2 differ: char 11, line 1 -- To unsubscribe, e-mail: opensuse-commit+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-commit+help@opensuse.org
participants (1)
-
root@hilbert.suse.de