Hello community, here is the log from the commit of package sysconfig for openSUSE:Factory checked in at Fri Jan 7 09:15:25 CET 2011. -------- --- sysconfig/sysconfig.changes 2010-12-07 12:23:11.000000000 +0100 +++ /mounts/work_src_done/STABLE/sysconfig/sysconfig.changes 2010-12-09 16:13:47.000000000 +0100 @@ -1,0 +2,17 @@ +Thu Dec 9 15:13:27 UTC 2010 - mt@suse.de + +- version 0.74.3 +- Use iBFT primary or PXE BOOTIF inteface as primary dhcp interface + (sets the default route and hostname) and the "first up interface + wins" selection used before as fallback, when there is explicit + user configuration available. Updated the DHCLIENT_PRIMARY_DEVICE + variable description, added it also to the global network/dhcp + config file (bnc#653365). +- Improved default vlan name scheme docs in ifcfg-vlan.5 man page. +- Use startmode auto instead of onboot in ifcfg-lo (bnc#533818) +- Dropped obsolete and confusing etc/modprobe.d/50-ipv6.conf file + (bnc#632530, bnc#656916). +- Fixed link_wait scriptname check and ping usage (bnc#644738); + improved to allow the user to specify the steps. + +------------------------------------------------------------------- calling whatdependson for head-i586 Old: ---- sysconfig-0.74.2.tar.bz2 New: ---- sysconfig-0.74.3.tar.bz2 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ sysconfig.spec ++++++ --- /var/tmp/diff_new_pack.xc8HQf/_old 2011-01-07 09:15:12.000000000 +0100 +++ /var/tmp/diff_new_pack.xc8HQf/_new 2011-01-07 09:15:12.000000000 +0100 @@ -1,7 +1,7 @@ # -# spec file for package sysconfig (Version 0.74.2) +# spec file for package sysconfig (Version 0.74.3) # -# Copyright (c) 2010 SUSE LINUX Products GmbH, Nuernberg, Germany. +# Copyright (c) 2011 SUSE LINUX Products GmbH, Nuernberg, Germany. # # All modifications and additions to the file contributed by third parties # remain the property of their copyright owners, unless otherwise agreed @@ -19,8 +19,8 @@ Name: sysconfig -Version: 0.74.2 -Release: 2 +Version: 0.74.3 +Release: 1 Summary: The system configuration scheme Url: http://gitorious.org/opensuse/sysconfig Group: System/Base @@ -102,7 +102,6 @@ %dir /etc/modprobe.d %config /etc/sysconfig/network/ifcfg.template %config /etc/modprobe.d/50-blacklist.conf -%config(noreplace) /etc/modprobe.d/50-ipv6.conf /etc/sysconfig/network/scripts/* /etc/sysconfig/network/if-up.d/ndp-proxy /etc/sysconfig/network/if-down.d/ndp-proxy @@ -187,15 +186,6 @@ done # erroneous move from network/dhcp to network/config while 11.1 beta sysconfig_remove_and_set network/config WRITE_HOSTNAME_TO_HOSTS -# -# * update to >= 11.2 -# -# FIXME: use disable_ipv6 -# move ipv6 settings created by yast2-network before 11.2 -# -if test -f etc/modprobe.d/ipv6 ; then - mv -f etc/modprobe.d/ipv6 etc/modprobe.d/50-ipv6.conf -fi %postun %{insserv_cleanup} ++++++ sysconfig-0.74.2.tar.bz2 -> sysconfig-0.74.3.tar.bz2 ++++++ ++++ 14613 lines of diff (skipped) ++++ retrying with extended exclude list diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/sysconfig-0.74.2/ChangeLog new/sysconfig-0.74.3/ChangeLog --- old/sysconfig-0.74.2/ChangeLog 2010-11-11 14:42:45.000000000 +0100 +++ new/sysconfig-0.74.3/ChangeLog 2011-01-06 10:53:18.000000000 +0100 @@ -1,4 +1,62 @@ -commit 7cda3f6f76b177f2cbc3aa91e84fffbba2508ffa (HEAD, master) +commit e38938065e356e5b96ee42ea616c1796037fd89b (HEAD, origin/master, export/master, opensuse-11.4) +Author: Marius Tomaschewski <mt@suse.de> +Date: Wed Jan 5 16:58:56 2011 +0100 + + version 0.74.3, updated sysconfig.changes + +commit 9f83ac4f48920bc5d781d75702ccd59a4dae2944 +Author: Marius Tomaschewski <mt@suse.de> +Date: Thu Dec 9 16:16:51 2010 +0100 + + Use iBFT primary or PXE BOOTIF as primary in dhcp + + Use iBFT primary or PXE BOOTIF inteface as primary dhcp interface + (sets the default route and hostname) and the "first up interface + wins" selection used before as fallback, when there is explicit + user configuration available. Updated the DHCLIENT_PRIMARY_DEVICE + variable description, added it also to the global network/dhcp + config file (bnc#653365). + +commit e4aca9a3dc0853c6087fdf271a7ae18440e7c0cf +Author: Marius Tomaschewski <mt@suse.de> +Date: Thu Dec 9 14:13:56 2010 +0100 + + Merged changes from openSUSE:Factory + +commit c2285de766d1b4146d7215bafea5bc1f0a2e3fa6 +Author: Marius Tomaschewski <mt@suse.de> +Date: Thu Dec 9 14:09:41 2010 +0100 + + Default vlan name scheme in ifcfg-vlan.5 man page + + Make it clear, that <ifname>.<vlan-id> (eth0.42) is the default and + prefered name scheme for vlan interfaces. + +commit de4ae9ea2c1617fde5594ef99a136180df9e0fd5 +Author: Marius Tomaschewski <mt@suse.de> +Date: Thu Dec 9 10:12:03 2010 +0100 + + Use startmode auto instead of onboot in ifcfg-lo + + The startmode onboot is still valid, but a backward compatibility + alias to auto (bnc#533818). + +commit ed94c15257f8816eff66f7d603c2152fa4950718 +Author: Marius Tomaschewski <mt@suse.de> +Date: Wed Dec 1 15:51:17 2010 +0100 + + Dropped obsolete /etc/modprobe.d/50-ipv6.conf (see bnc#632530) + +commit 10da7e74aff7ecb6399fc8bcf126689a0b3be64e +Author: Marius Tomaschewski <mt@suse.de> +Date: Tue Nov 16 18:02:03 2010 +0100 + + Fixed link_wait scriptname check improved the script + + Fixed link_wait scriptname check and ping usage (bnc#644738); + improved to allow the user to specify the steps. + +commit 7cda3f6f76b177f2cbc3aa91e84fffbba2508ffa Author: Marius Tomaschewski <mt@suse.de> Date: Thu Nov 11 14:42:03 2010 +0100 @@ -25,7 +83,7 @@ Signed-off-by: Marius Tomaschewski <mt@suse.de> -commit 7a325b566171b4c696c7e55567f6ba2aea59fe20 (origin/master, export/master) +commit 7a325b566171b4c696c7e55567f6ba2aea59fe20 Author: Marius Tomaschewski <mt@suse.de> Date: Tue Oct 26 13:16:42 2010 +0200 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/sysconfig-0.74.2/config/hardware/50-ipv6.conf new/sysconfig-0.74.3/config/hardware/50-ipv6.conf --- old/sysconfig-0.74.2/config/hardware/50-ipv6.conf 2010-11-05 14:01:26.000000000 +0100 +++ new/sysconfig-0.74.3/config/hardware/50-ipv6.conf 1970-01-01 01:00:00.000000000 +0100 @@ -1,11 +0,0 @@ -# -# Using this file does not work when the module is compiled -# into the kernel (11.2 and above). Instead, please use the -# net.ipv6.conf.all.disable_ipv6 = 1 -# global sysctl setting in /etc/sysctl.conf or also a per -# interface settings in ifsysctl(5) files. -# - -# Comment out to disable IPv6: -#install ipv6 /bin/true - diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/sysconfig-0.74.2/config/hardware/Makefile.am new/sysconfig-0.74.3/config/hardware/Makefile.am --- old/sysconfig-0.74.2/config/hardware/Makefile.am 2010-10-05 22:42:15.000000000 +0200 +++ new/sysconfig-0.74.3/config/hardware/Makefile.am 2011-01-06 10:45:47.000000000 +0100 @@ -5,7 +5,7 @@ udevrules_DATA = 81-mount.rules -modprobe_DATA = 50-blacklist.conf 50-ipv6.conf +modprobe_DATA = 50-blacklist.conf EXTRA_DIST = $(modprobe_DATA) $(udevrules_DATA) diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/sysconfig-0.74.2/config/ifcfg-lo new/sysconfig-0.74.3/config/ifcfg-lo --- old/sysconfig-0.74.2/config/ifcfg-lo 2010-01-20 17:57:54.000000000 +0100 +++ new/sysconfig-0.74.3/config/ifcfg-lo 2011-01-06 10:45:47.000000000 +0100 @@ -4,6 +4,6 @@ NETWORK=127.0.0.0 BROADCAST=127.255.255.255 IPADDR_2=127.0.0.2/8 -STARTMODE=onboot +STARTMODE=auto USERCONTROL=no FIREWALL=no diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/sysconfig-0.74.2/config/ifcfg.template new/sysconfig-0.74.3/config/ifcfg.template --- old/sysconfig-0.74.2/config/ifcfg.template 2010-11-05 14:01:26.000000000 +0100 +++ new/sysconfig-0.74.3/config/ifcfg.template 2011-01-06 10:45:47.000000000 +0100 @@ -212,38 +212,6 @@ UNIQUE= ########################################################################## -### FIXME: -### From here one up to 'bridge settings' the file is not up to date - - -## Multiple addresses -## You can extend the variable name 'IPADDR' by any string you like (IPADDR_1, -## IPADDR_FOO, IPADDRxxx, ...) and use these variables for your IP addresses. -## If you need some additional parameters for these addresses, then just add -## the same extension to these variable names. -## IPADDR_AAA=1.2.3.4 -## NETMASK_AAA=255.0.0.0 -## BROADCAST_AAA=1.2.3.55 -## IPADDR_BBB=10.10.2.3/16 -## LABEL_BBB=BBB -## an so on ... -## -## You do not need to set a label for any address. But then you should not use -## ifconfig any longer; go and use ip. If you want to use ifconfig then omit the -## label for your main address and set a label for every additional address. - -## Routing: -## If you need special routes for a configuration, then use a file named -## ifroute-<config> where <config> is the same string as in ifcfg-<config>. -## It has the same syntax like routes except one difference: -## If you omit the interface name (4th field) in the ifroute file it will be -## set to the current interface name when setting up the interface. You need to -## do this with hotpluggable devices, where you do not know which interface name -## they will get at the time when you plug them. -## See man 5 routes. - - -########################################################################## ## DHCP settings ## Type: list("",yes,no) @@ -252,31 +220,54 @@ # Multiple DHCP clients: # # With two or more DHCP clients running, they would concurrently try to replace -# the default route or rewrite resolv.conf, rewrite ntp.conf etc. There are two -# ways of dealing with this conflict (and it is a conflict, because you can -# have only one default route even though routes are stackable, and there can -# only be one resolv.conf file): +# the default route or set the hostname. There are several ways of dealing with +# this conflict (and it is a conflict, because you can have only one default +# route even though routes are stackable and the dhcp clients would change it +# while every lease renew): # -# 1) allow both clients to do that stuff. This would work in many cases if +# 1) Allow both clients to do that stuff. This would work in many cases if # only one of the interfaces is used at a time. However, it would lead to -# undefined behaviour. +# undefined behaviour such as changing default route e.g. on dhcp renew. # -# 2) allow only one of the DHCP clients to do that stuff. This implies -# that there would be a "primary" interface and a "secondary". This is the -# assumption the default configuration is based on. But since the system -# can't guess which interface is "more important" and should have the -# default route and resolver configuration associated with it, it simply -# chooses the first interface that is started with DHCP to be -# "authoritative". Which one that is can be influenced by adding -# DHCLIENT_PRIMARY_DEVICE=yes to one of the /etc/sysconfig/network/ifcfg-* -# files. This can even be added to more than one file, to achieve the -# behaviour described in 1). Thus, there is the flexibility to do it -# either way. -# -# Per default, only the DHCP client that is started first will be allowed to -# change the default route / resolver configuration etc. All other running -# clients will only configure the interface with an address, but not change -# "global" configuration. +# 2) When both interfaces are connected to the same network, you may configure +# a bonding interface in active-backup mode (or another, e.g. 802.3ad, when +# supported and configured by the switch) and configure dhcp on the bonding +# instead. +# +# 3) When only one of the interfaces is used at time, you may set STARTMODE to +# ifplugd and specify the priority of the interfaces in IFPLUGD_PRIORITY. +# This is a common scenario for notebooks to use the wired interface when +# connected, wireless otherwise. +# +# 4) allow only one of the DHCP clients to do that stuff. +# This implies that there would be a "primary" interface and a "secondary". +# This is the assumption the default configuration is based on. But since +# the system often can't guess which interface is "more important", we +# simply choose one depending on related configuration or take the first +# interface that is started with DHCP to be primary ("authoritative"). +# This can be configured by setting DHCLIENT_PRIMARY_DEVICE=yes in one of +# the /etc/sysconfig/network/ifcfg-* files and DHCLIENT_PRIMARY_DEVICE=no +# in /etc/sysconfig/network/dhcp (or in all other ifcfg files using DHCP). +# +# When DHCLIENT_PRIMARY_DEVICE is not explicitly configured to yes/no, the +# "primary" interface is choosed as follows: +# +# - On systems with iSCSI Boot Firmare Table, the iBFT primary interface +# is used as the primary DHCP interface by default. +# - On systems booting via PXE, the interface specified by the BOOTIF kernel +# parameter is used as primary DHCP interface. Set the global "ipappend 2" +# parameter in pxelinux.cfg/* files, so the BOOTIF kernel parameter is set. +# - Otherwise, the DHCP client that is started first will be "primary" and +# allowed the set the default route and hostname ("first up wins" mode, +# the only one before openSUSE 11.4). To force this "first up wins" mode, +# set DHCLIENT_PRIMARY_DEVICE="first" in /etc/sysconfig/network/dhcp. +# +# All other running dhcp clients will only configure the interface with an +# address and network routes, but not change the "global" default route or +# hostname. +# See also DHCLIENT_SET_DEFAULT_ROUTE and DHCLIENT_SET_HOSTNAME variables, +# that allow to modify the DHCLIENT_PRIMARY_DEVICE parameter behaviour once +# again. # # Thus, to specifically allow an interface's DHCP client to change "global" # configuration, set the following variable to "yes". Or you can make an @@ -285,17 +276,16 @@ # DHCLIENT_PRIMARY_DEVICE= - ## Type: ## Default: # -# Even more finegrained control can be excerted by setting any of the variables -# from /etc/sysconfig/network/dhcp here: +# Even more finegrained control can be excerted by setting any of the +# variables from /etc/sysconfig/network/dhcp in ifcfg files: +# DHCLIENT_DEBUG= DHCLIENT_SET_HOSTNAME= DHCLIENT_SET_DEFAULT_ROUTE= DHCLIENT_TIMEOUT= -DHCLIENT_REBOOT_TIMEOUT= DHCLIENT_CLIENT_ID= DHCLIENT_HOSTNAME_OPTION= DHCLIENT_VENDOR_CLASS_ID= diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/sysconfig-0.74.2/config/sysconfig.dhcp-network new/sysconfig-0.74.3/config/sysconfig.dhcp-network --- old/sysconfig-0.74.2/config/sysconfig.dhcp-network 2010-11-05 14:01:26.000000000 +0100 +++ new/sysconfig-0.74.3/config/sysconfig.dhcp-network 2011-01-06 10:45:47.000000000 +0100 @@ -72,6 +72,68 @@ # DHCLIENT_DEBUG="no" +## Type: list("",yes,no,first) +## Default: "" +# +# Multiple DHCP clients: +# +# With two or more DHCP clients running, they would concurrently try to replace +# the default route or set the hostname. There are several ways of dealing with +# this conflict (and it is a conflict, because you can have only one default +# route even though routes are stackable and the dhcp clients would change it +# while every lease renew): +# +# 1) Allow both clients to do that stuff. This would work in many cases if +# only one of the interfaces is used at a time. However, it would lead to +# undefined behaviour such as changing default route e.g. on dhcp renew. +# +# 2) When both interfaces are connected to the same network, you may configure +# a bonding interface in active-backup mode (or another, e.g. 802.3ad, when +# supported and configured by the switch) and configure dhcp on the bonding +# instead. +# +# 3) When only one of the interfaces is used at time, you may set STARTMODE to +# ifplugd and specify the priority of the interfaces in IFPLUGD_PRIORITY. +# This is a common scenario for notebooks to use the wired interface when +# connected, wireless otherwise. +# +# 4) allow only one of the DHCP clients to do that stuff. +# This implies that there would be a "primary" interface and a "secondary". +# This is the assumption the default configuration is based on. But since +# the system often can't guess which interface is "more important", we +# simply choose one depending on related configuration or take the first +# interface that is started with DHCP to be primary ("authoritative"). +# This can be configured by setting DHCLIENT_PRIMARY_DEVICE=yes in one of +# the /etc/sysconfig/network/ifcfg-* files and DHCLIENT_PRIMARY_DEVICE=no +# in /etc/sysconfig/network/dhcp (or in all other ifcfg files using DHCP). +# +# When DHCLIENT_PRIMARY_DEVICE is not explicitly configured to yes/no, the +# "primary" interface is choosed as follows: +# +# - On systems with iSCSI Boot Firmare Table, the iBFT primary interface +# is used as the primary DHCP interface by default. +# - On systems booting via PXE, the interface specified by the BOOTIF kernel +# parameter is used as primary DHCP interface. Set the global "ipappend 2" +# parameter in pxelinux.cfg/* files, so the BOOTIF kernel parameter is set. +# - Otherwise, the DHCP client that is started first will be "primary" and +# allowed the set the default route and hostname ("first up wins" mode, +# the only one before openSUSE 11.4). To force this "first up wins" mode, +# set DHCLIENT_PRIMARY_DEVICE="first" in /etc/sysconfig/network/dhcp. +# +# All other running dhcp clients will only configure the interface with an +# address and network routes, but not change the "global" default route or +# hostname. +# See also DHCLIENT_SET_DEFAULT_ROUTE and DHCLIENT_SET_HOSTNAME variables, +# that allow to modify the DHCLIENT_PRIMARY_DEVICE parameter behaviour once +# again. +# +# Thus, to specifically allow an interface's DHCP client to change "global" +# configuration, set the following variable to "yes". Or you can make an +# interface's DHCP client never change these settings if you set it to "no". +# If you leave it empty then ifup-dhcp will decide. +# +DHCLIENT_PRIMARY_DEVICE= + ## Type: yesno ## Default: no # diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/sysconfig-0.74.2/doc/ifcfg-vlan.5 new/sysconfig-0.74.3/doc/ifcfg-vlan.5 --- old/sysconfig-0.74.2/doc/ifcfg-vlan.5 2010-01-21 16:39:40.000000000 +0100 +++ new/sysconfig-0.74.3/doc/ifcfg-vlan.5 2011-01-06 10:45:47.000000000 +0100 @@ -27,35 +27,41 @@ number at the end of the interface name is the VLAN ID. Preferably the interface name and the configuration file follow the -VLAN interface name scheme (type), that is either: +VLAN interface name schemes (types), that is either: .RS .PD 0 .P -ifcfg-\fBvlan\fR<\fBVLAN-ID\fR> (e.g. ifcfg-\fIvlan42\fR) +ifcfg-\fBname\fR.<\fBVLAN-ID\fR> (e.g. ifcfg-\fIeth0.42\fR) or .P -ifcfg-\fBname\fR.<\fBVLAN-ID\fR> (e.g. ifcfg-\fIeth0.42\fR) +ifcfg-\fBvlan\fR<\fBVLAN-ID\fR> (e.g. ifcfg-\fIvlan42\fR) .PD .RE +The ifcfg-\fBname\fR.<\fBVLAN-ID\fR> scheme is default on Linux. +Note also, that the ifcfg-\fBvlan\fR<\fBVLAN-ID\fR> scheme makes +it impossible to use same VLAN-ID on more than one interface +(e.g. ifcfg-eth\fI0\fR.42 and ifcfg-eth\fI1\fR.42). + The VLAN-ID can be also 0-padded (e.g. ifcfg-vlan0042 or ifcfg-eth0.0042). Also in case of custom names, trailing digits are interpreted as VLAN-ID by default (e.g. ifcfg-dmz42). When \fBVLAN_ID\fR is set in the config, -the interface name have any name (e.g. ifcfg-foobar). +the interface name can have any name (e.g. ifcfg-foobar). Note: The drawback of custom interface names and VLAN_ID usage is, that a rename of the interface is required and that they violate -the name scheme. +the vlan name scheme. .PP The real interface will be set UP automatically and doesn't need a config file in case of a physical interface. But without a config file YaST will consider this interface as unused, if will not follow hotplug events and -you're unable to apply any settings, e.g. ETHTOOL_OPTIONS. To avoid that, -provide an config file with at least STARTMODE='auto'. +you're unable to apply any settings, e.g. ETHTOOL_OPTIONS. To avoid these +problems, it is strongly recommended to provide a config file with at +least STARTMODE='auto' for the physical interface as well. The rest of the VLAN interface IP and routes configuration do not differ from ordinary interfaces. See also \fIman\ ifcfg\fR and \fIman\ routes\fR @@ -63,9 +69,9 @@ .SH EXAMPLES .TP -Sets up \fIvlan3\fR vlan interface on top of \fBeth0\fR: +Sets up \fIeth0.3\fR vlan interface on top of \fBeth0\fR: -.I ifcfg-vlan3 +.I ifcfg-eth0.3 .nf STARTMODE='auto' ETHERDEVICE='\fBeth0\fR' @@ -73,9 +79,9 @@ .fi .TP -Sets up \fIeth0.3\fR vlan interface on top of \fBeth0\fR: +Sets up \fIvlan3\fR vlan interface on top of \fBeth0\fR: -.I ifcfg-eth0.3 +.I ifcfg-vlan3 .nf STARTMODE='auto' ETHERDEVICE='\fBeth0\fR' diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/sysconfig-0.74.2/missing new/sysconfig-0.74.3/missing --- old/sysconfig-0.74.2/missing 2010-11-11 14:42:39.000000000 +0100 +++ new/sysconfig-0.74.3/missing 2011-01-06 10:46:02.000000000 +0100 @@ -1,10 +1,10 @@ #! /bin/sh # Common stub for a few missing GNU programs while installing. -scriptversion=2006-05-10.23 +scriptversion=2009-04-28.21; # UTC -# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006 -# Free Software Foundation, Inc. +# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006, +# 2008, 2009 Free Software Foundation, Inc. # Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996. # This program is free software; you can redistribute it and/or modify @@ -18,9 +18,7 @@ # GNU General Public License for more details. # You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA -# 02110-1301, USA. +# along with this program. If not, see <http://www.gnu.org/licenses/>. # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a @@ -89,6 +87,9 @@ tar try tar, gnutar, gtar, then tar without non-portable flags yacc create \`y.tab.[ch]', if possible, from existing .[ch] +Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and +\`g' are ignored when checking the name. + Send bug reports to <bug-automake@gnu.org>." exit $? ;; @@ -106,15 +107,22 @@ esac +# normalize program name to check for. +program=`echo "$1" | sed ' + s/^gnu-//; t + s/^gnu//; t + s/^g//; t'` + # Now exit if we have it, but it failed. Also exit now if we # don't have it and --version was passed (most likely to detect -# the program). +# the program). This is about non-GNU programs, so use $1 not +# $program. case $1 in - lex|yacc) + lex*|yacc*) # Not GNU programs, they don't have --version. ;; - tar) + tar*) if test -n "$run"; then echo 1>&2 "ERROR: \`tar' requires --run" exit 1 @@ -138,7 +146,7 @@ # If it does not exist, or fails to run (possibly an outdated version), # try to emulate it. -case $1 in +case $program in aclocal*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if @@ -148,7 +156,7 @@ touch aclocal.m4 ;; - autoconf) + autoconf*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`${configure_ac}'. You might want to install the @@ -157,7 +165,7 @@ touch configure ;; - autoheader) + autoheader*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`acconfig.h' or \`${configure_ac}'. You might want @@ -187,7 +195,7 @@ while read f; do touch "$f"; done ;; - autom4te) + autom4te*) echo 1>&2 "\ WARNING: \`$1' is needed, but is $msg. You might have modified some files without having the @@ -210,7 +218,7 @@ fi ;; - bison|yacc) + bison*|yacc*) echo 1>&2 "\ WARNING: \`$1' $msg. You should only need it if you modified a \`.y' file. You may need the \`Bison' package @@ -240,7 +248,7 @@ fi ;; - lex|flex) + lex*|flex*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a \`.l' file. You may need the \`Flex' package @@ -263,7 +271,7 @@ fi ;; - help2man) + help2man*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a dependency of a manual page. You may need the @@ -277,11 +285,11 @@ else test -z "$file" || exec >$file echo ".ab help2man is required to generate this page" - exit 1 + exit $? fi ;; - makeinfo) + makeinfo*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a \`.texi' or \`.texinfo' file, or any other file @@ -310,7 +318,7 @@ touch $file ;; - tar) + tar*) shift # We have already tried tar in the generic part. @@ -363,5 +371,6 @@ # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-end: "$" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" # End: diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/sysconfig-0.74.2/scripts/functions new/sysconfig-0.74.3/scripts/functions --- old/sysconfig-0.74.2/scripts/functions 2010-11-05 14:01:26.000000000 +0100 +++ new/sysconfig-0.74.3/scripts/functions 2011-01-06 10:45:47.000000000 +0100 @@ -273,7 +273,25 @@ } get_hwaddress () { - cat /sys/class/net/$1/address >/dev/null + cat /sys/class/net/$1/address 2>/dev/null +} + +get_bonding_slave_hwaddrs() +{ + local ifname="${1}" + local saddrs=() + if test -f "/proc/net/bonding/$ifname" ; then + while read line ; do + case $line in + "Permanent HW addr:"*) + saddr+=("${line//Permanent HW addr: /}") + ;; + esac + done < "/proc/net/bonding/$ifname" 2>/dev/null + echo "${saddr[*]}" + return 0 + fi + return 1 } # This will echo the first address listed for the given interface. @@ -820,3 +838,77 @@ return 1 } +get_pxe_bootif_param() +{ + local cmdline=$(cat /proc/cmdline 2>/dev/null) + local rx='^(.*[[:space:]])?BOOTIF=([[:xdigit:]]{2}([-[:xdigit:]]{2})+)([[:space:]].*)?$' + if [[ ${cmdline} =~ ${rx} ]] ; then + echo "${BASH_REMATCH[2]}" + fi +} + +is_pxe_boot_iface() +{ + # params <interface name> + # output 'yes': bootif param available, $1 interface match + # 'no' : bootif param available, no $1 interface match + # '' : otherwise (no bootif param, errors) + # returns 0 on success, 1 on errors + local bootif=`get_pxe_bootif_param 2>/dev/null` + test "x$bootif" = x && return 0 + + local ifname="$1" + test "x$ifname" != x -a -d "/sys/class/net/$ifname" || return 1 + local iftype=`cat "/sys/class/net/$ifname/type" 2>/dev/null` + local ifaddr=`get_hwaddress "$ifname"` + test "x$iftype" != x -a "x$ifaddr" != x || return 1 + + local maddr=${bootif//-/:} + local addrs="$ifaddr" addr + case $iftype in + 1) + # TODO: bridge and vlan inherit hwaddrs as well + if test -d "/sys/class/net/$ifname/bonding" ; then + addrs=`get_bonding_slave_hwaddrs "$ifname" 2>/dev/null` + fi + ;; + esac + for addr in ${addrs} ; do + local x=`printf "%02x:%s" "$iftype" "$addr" 2>/dev/null` + if test "x$maddr" = "x$x" ; then + echo "yes" + return 0 + fi + done + echo "no" +} + +is_ibft_primary_iface() +{ + # params <interface name> + # output 'yes': ibft interfaces available, $1 interface is ibft primary + # 'no' : ibft interfaces available, $1 interface is not primary + # '' : otherwise (no ibft, errors) + # returns 0 on success, 1 on errors + case $1 in ""|.|..|*/*) return 1 ;; esac + test -d "/sys/class/net/$1" || return 1 + + local IF="$1" sysfs_ibft="/sys/firmware/ibft" + test -d "$sysfs_ibft" || return 1 + + # ibft ethernet0 is the primary ibft => dhcp primary + local ibft_nic0 enic edir="$sysfs_ibft/ethernet0" + if test -d "$edir" -a -d "$edir/device/net" ; then + for enic in `ls -1 $edir/device/net/ 2>/dev/null` ; do + test -d "$edir/device/net/$enic" || continue + ibft_nic0=$enic + break + done + fi + + if test "x$ibft_nic0" != "x" ; then + test "x$ibft_nic0" = "x$IF" && echo yes || echo no + fi + return 0 +} + diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/sysconfig-0.74.2/scripts/ifup-dhcp new/sysconfig-0.74.3/scripts/ifup-dhcp --- old/sysconfig-0.74.2/scripts/ifup-dhcp 2010-11-05 14:06:58.000000000 +0100 +++ new/sysconfig-0.74.3/scripts/ifup-dhcp 2011-01-06 10:45:47.000000000 +0100 @@ -502,21 +502,60 @@ # that is provided by the cached config data in a way that a user-defined # DHCLIENT_PRIMARY_DEVICE remains untouched. - if [ -z "$DHCLIENT_PRIMARY_DEVICE" ]; then - + case $DHCLIENT_PRIMARY_DEVICE in + yes|no) + # -> explicit configuration, use as is + ;; + first|*) # read cached config data into PRIMARY_FROM_CACHE PRIMARY_FROM_CACHE="`grep_cached_config_data primary yes`" if [ -z "$PRIMARY_FROM_CACHE" ]; then - # no primary interface up-> we're the primary interface - DHCLIENT_PRIMARY_DEVICE='yes' - # save this fact to cached config data - write_cached_config_data primary yes $INTERFACE - commit_cached_config_data $INTERFACE + case $DHCLIENT_PRIMARY_DEVICE in + first) + # 'first' is to disable the ibft / pxe bootif checks + # and revert to use the old "first up wins" mode + + # no primary interface up-> we're the primary interface + DHCLIENT_PRIMARY_DEVICE='yes' + ;; + *) + # check if ibft is available and whether this + # interface is the primary ibft interface + ibft_primary=`is_ibft_primary_iface $INTERFACE 2>/dev/null` + case $ibft_primary in + yes|no) + DHCLIENT_PRIMARY_DEVICE=$ibft_primary + ;; + *) + # check the BOOTIF PXE kernel parameter and + # set the primary flag when BOOTIF matches + # the interface or BOOTIF is not set at all + pxe_bootif=`is_pxe_boot_iface $INTERFACE 2>/dev/null` + if test "x$pxe_bootif" = xno ; then + # there is a BOOTIF param, but it + # does not match this interface + DHCLIENT_PRIMARY_DEVICE='no' + else + DHCLIENT_PRIMARY_DEVICE='yes' + fi + ;; + esac + ;; + esac + + if test "x$DHCLIENT_PRIMARY_DEVICE" != "xno" ; then + # OK, we are the primary + DHCLIENT_PRIMARY_DEVICE=yes + + # save this fact to cached config data + write_cached_config_data primary yes $INTERFACE + commit_cached_config_data $INTERFACE + fi else # primary interface already up -> DHCLIENT_PRIMARY_DEVICE='no' - if [ "${PRIMARY_FROM_CACHE% }" = $INTERFACE ]; then + if [ "${PRIMARY_FROM_CACHE// /}" = $INTERFACE ]; then # special case for ifrenew: # we are the primary interface which is up DHCLIENT_PRIMARY_DEVICE='yes' @@ -524,8 +563,8 @@ DHCLIENT_PRIMARY_DEVICE='no' fi fi - - fi + ;; + esac DHCP4_STATUS=$R_NOTCONFIGURED DHCP6_STATUS=$R_NOTCONFIGURED diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/sysconfig-0.74.2/scripts/link_wait new/sysconfig-0.74.3/scripts/link_wait --- old/sysconfig-0.74.2/scripts/link_wait 2010-11-05 14:01:26.000000000 +0100 +++ new/sysconfig-0.74.3/scripts/link_wait 2011-01-06 10:45:47.000000000 +0100 @@ -21,7 +21,7 @@ # usage () { echo $@ - echo "usage: $SCRIPTNAME [<config>] <interface> [-o <options>]" + echo "usage: if-up.d/$SCRIPTNAME [<config>] <interface> [-o <options>]" echo "" echo "Options are:" echo " [on]boot : we are currently booting (or shutting down)" @@ -33,13 +33,16 @@ echo "Per interface ifcfg-<config> file variables are:" echo " LINK_WAIT=no (or empty/unset)" echo " - default, don't do anything" - echo " LINK_WAIT=check (or yes)" - echo " - check the link state flags" - echo " LINK_WAIT=<secs>" - echo " - seconds to just sleep without any check" + echo " LINK_WAIT=<steps>" + echo " - space separated list of steps to preform:" + echo " sleep: just sleep" + echo " check: check link state flags" + echo " ping : ping specified address" + echo " LINK_WAIT_SECS=<secs>" + echo " - seconds for each check/sleep/ping step" + echo " (limit is WAIT_FOR_INTERFACES for all)" echo " LINK_WAIT_PING_IPV4=<ipv4 address to ping>" - echo " - sleep half of the time in LINK_WAIT, then" - echo " ping the address the rest of the time" + echo " - ping the specified address" echo "" echo "Install using:" echo " ln -s ../scripts/link_wait /etc/sysconfig/network/if-up.d/" @@ -59,7 +62,8 @@ # check arguments and how we are called (in case of links) # SCRIPTNAME=${0##*/} -debug $* +echo debug $* +#set -x case $1 in ""|-h|*help*) usage ;; esac CONFIG="$1" shift @@ -93,6 +97,7 @@ # source interface config and make sure we use the # per interface setting for wait for link check... unset LINK_WAIT +unset LINK_WAIT_SECS unset LINK_WAIT_PING_IPV4 test -f ./ifcfg-$CONFIG && . ./ifcfg-$CONFIG || exit 0 @@ -119,72 +124,96 @@ test "$c" = "1" -a "$d" = "0" -a \ \( "$o" = "up" -o "$o" = "unknown" \) && return 0 else - # SLE 10 does not have operstate/dormant + # e.g. SLE 10 does not have operstate/dormant test "$c" = "1" && return 0 fi } -case $SCRIPTNAME in +do_ping() +{ + local ifname=$1 + local target=$2 + local -i limit=$3 + local -i ret=0 + local beg now sec rest + IFS=. read beg rest < /proc/uptime + for ((now=$beg; $now < ($beg + $limit); )) ; do + sec=$(($limit - ($now - $beg))) + out=`ping -q -I $ifname -w $sec -c 1 $target 2>&1` + ret=$? + debug "$out" + test $ret -eq 0 && break + IFS=. read now rest < /proc/uptime + done + return $ret +} + +case $0 in *if-up.d*) if test "$MODE" = onboot -a "${LINK_WAIT:-no}" != no ; then - test "$LINK_WAIT" = yes && LINK_WAIT=check - - if test "$LINK_WAIT" != check -a $(( $LINK_WAIT )) -gt 0 ; - then - # don't wait more than WAIT_FOR_INTERFACES / 3 - test $(( $LINK_WAIT )) -gt \ - $(( $WAIT_FOR_INTERFACES / 4 )) && \ - LINK_WAIT=$(( $WAIT_FOR_INTERFACES / 4 )) - - case $LINK_WAIT_PING_IPV4 in - (*\.*\.*\.*) - declare -i secs=$(( $LINK_WAIT / 2 )) - - ifprint message "waiting $secs secs" - sleep $secs - - ifprint message "pinging $LINK_WAIT_PING_IPV4 up to $secs secs" - ping -I $INTERFACE -w $secs -c 1 $LINK_WAIT_PING_IPV4 - ifprint message "ping returned $?" - ;; - (*) - declare -i secs=$(( $LINK_WAIT )) - - ifprint message "waiting $secs secs" - sleep $secs - ;; - esac - else - # don't wait more than WAIT_FOR_INTERFACES / 3 - declare -i secs=$(( $WAIT_FOR_INTERFACES / 4 )) - declare -i lmax=$secs - declare -i loop=0 - case $LINK_WAIT_PING_IPV4 in - (*\.*\.*\.*) lmax=$(( $lmax / 2 )) ;; - esac - - check_link_detected "$INTERFACE" || \ - ifprint message "no link detected ... waiting up to $secs secs" - - while ! check_link_detected "$INTERFACE" ; do - sleep 1 - test $((++loop)) -ge $lmax && break + # some compatibility to older version + if test "$LINK_WAIT" = yes ; then + LINK_WAIT=check + fi + if test -z "$LINK_WAIT_SECS" ; then + test $(( $LINK_WAIT )) -gt 0 && \ + LINK_WAIT_SECS=$LINK_WAIT + case $LINK_WAIT_PING_IPV4 in + *\.*\.*\.*) LINK_WAIT="ping" ;; + *) LINK_WAIT="check" ;; + esac + fi + + steps=($LINK_WAIT) + # don't wait more than WAIT_FOR_INTERFACES + if test ${#steps[@]} -gt 0 ; then + if test $(( $LINK_WAIT_SECS )) -eq 0 -o \ + $(( $(($LINK_WAIT_SECS)) * ${#steps[@]} )) -gt \ + $(( $WAIT_FOR_INTERFACES )) ; then + LINK_WAIT_SECS=$(( $WAIT_FOR_INTERFACES / ${#steps[@]} )) + fi + fi + spend=0 + for step in ${steps[@]} ; do + case $step in + check) + declare -i secs=$LINK_WAIT_SECS + declare -i loop=0 + + check_link_detected "$INTERFACE" || \ + ifprint message "no link detected ... waiting up to $secs secs" + + while ! check_link_detected "$INTERFACE" ; do + sleep 1 + test $((++loop)) -ge $secs && break + done + + spend=$((spend + loop)) + check_link_detected "$INTERFACE" \ + && ifprint message "link detected after $spend secs" \ + || ifprint message "no link detected ... continue" + ;; + sleep) + ifprint message "sleeping for $LINK_WAIT_SECS secs" + sleep $LINK_WAIT_SECS + spend=$((spend + LINK_WAIT_SECS)) + ;; + ping) + case $LINK_WAIT_PING_IPV4 in + *\.*\.*\.*) + ifprint message "ping $LINK_WAIT_PING_IPV4 up to $LINK_WAIT_SECS secs" + if do_ping "$INTERFACE" "$LINK_WAIT_PING_IPV4" "$LINK_WAIT_SECS" ; then + ifprint message "ping reports reachable $LINK_WAIT_PING_IPV4" + else + ifprint message "ping reports unreachable $LINK_WAIT_PING_IPV4" + fi + spend=$((spend + LINK_WAIT_SECS)) + ;; + esac + ;; + esac done - - check_link_detected "$INTERFACE" \ - && ifprint message "link detected after $loop secs" \ - || ifprint message "no link detected ... continue" - - case $LINK_WAIT_PING_IPV4 in - (*\.*\.*\.*) - ifprint message "pinging $LINK_WAIT_PING_IPV4 up to $secs secs" - ping -I $INTERFACE -w $(( $secs - $loop )) -c 1 $LINK_WAIT_PING_IPV4 - ifprint message "ping returned $?" - ;; - esac - fi - fi ;; *if-down.d*) diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/sysconfig-0.74.2/sysconfig.spec new/sysconfig-0.74.3/sysconfig.spec --- old/sysconfig-0.74.2/sysconfig.spec 2010-11-11 14:42:42.000000000 +0100 +++ new/sysconfig-0.74.3/sysconfig.spec 2011-01-06 10:46:07.000000000 +0100 @@ -1,5 +1,5 @@ # -# spec file for package sysconfig (Version 0.74.2) +# spec file for package sysconfig (Version 0.74.3) # # Copyright (c) 2010 SUSE LINUX Products GmbH, Nuernberg, Germany. # @@ -19,7 +19,7 @@ Name: sysconfig -Version: 0.74.2 +Version: 0.74.3 Release: 0 Summary: The system configuration scheme Url: http://gitorious.org/opensuse/sysconfig @@ -27,6 +27,8 @@ License: GPLv2+ AutoReqProv: on PreReq: %fillup_prereq %insserv_prereq textutils fileutils gawk sed grep +# we may create these automatically from rpm later +Provides: sysvinit(network) Requires: iproute2 dbus-1 procps BuildRoot: %{_tmppath}/%{name}-%{version}-build Source: %name-%version.tar.bz2 @@ -100,7 +102,6 @@ %dir /etc/modprobe.d %config /etc/sysconfig/network/ifcfg.template %config /etc/modprobe.d/50-blacklist.conf -%config(noreplace) /etc/modprobe.d/50-ipv6.conf /etc/sysconfig/network/scripts/* /etc/sysconfig/network/if-up.d/ndp-proxy /etc/sysconfig/network/if-down.d/ndp-proxy @@ -185,15 +186,6 @@ done # erroneous move from network/dhcp to network/config while 11.1 beta sysconfig_remove_and_set network/config WRITE_HOSTNAME_TO_HOSTS -# -# * update to >= 11.2 -# -# FIXME: use disable_ipv6 -# move ipv6 settings created by yast2-network before 11.2 -# -if test -f etc/modprobe.d/ipv6 ; then - mv -f etc/modprobe.d/ipv6 etc/modprobe.d/50-ipv6.conf -fi %postun %{insserv_cleanup} diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/sysconfig-0.74.2/sysconfig.spec.in new/sysconfig-0.74.3/sysconfig.spec.in --- old/sysconfig-0.74.2/sysconfig.spec.in 2010-11-05 14:01:26.000000000 +0100 +++ new/sysconfig-0.74.3/sysconfig.spec.in 2011-01-06 10:45:47.000000000 +0100 @@ -27,6 +27,8 @@ License: GPLv2+ AutoReqProv: on PreReq: %fillup_prereq %insserv_prereq textutils fileutils gawk sed grep +# we may create these automatically from rpm later +Provides: sysvinit(network) Requires: iproute2 dbus-1 procps BuildRoot: %{_tmppath}/%{name}-%{version}-build Source: %name-%version.tar.bz2 @@ -100,7 +102,6 @@ %dir /etc/modprobe.d %config /etc/sysconfig/network/ifcfg.template %config /etc/modprobe.d/50-blacklist.conf -%config(noreplace) /etc/modprobe.d/50-ipv6.conf /etc/sysconfig/network/scripts/* /etc/sysconfig/network/if-up.d/ndp-proxy /etc/sysconfig/network/if-down.d/ndp-proxy @@ -185,15 +186,6 @@ done # erroneous move from network/dhcp to network/config while 11.1 beta sysconfig_remove_and_set network/config WRITE_HOSTNAME_TO_HOSTS -# -# * update to >= 11.2 -# -# FIXME: use disable_ipv6 -# move ipv6 settings created by yast2-network before 11.2 -# -if test -f etc/modprobe.d/ipv6 ; then - mv -f etc/modprobe.d/ipv6 etc/modprobe.d/50-ipv6.conf -fi %postun %{insserv_cleanup} diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/sysconfig-0.74.2/VERSION new/sysconfig-0.74.3/VERSION --- old/sysconfig-0.74.2/VERSION 2010-11-11 14:40:18.000000000 +0100 +++ new/sysconfig-0.74.3/VERSION 2011-01-06 10:45:47.000000000 +0100 @@ -1 +1 @@ -0.74.2 +0.74.3 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Remember to have fun... -- To unsubscribe, e-mail: opensuse-commit+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-commit+help@opensuse.org