Hello community, here is the log from the commit of package yast2-cluster for openSUSE:Factory checked in at 2018-03-29 11:57:20 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/yast2-cluster (Old) and /work/SRC/openSUSE:Factory/.yast2-cluster.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "yast2-cluster" Thu Mar 29 11:57:20 2018 rev:26 rq:591969 version:4.0.7 Changes: -------- --- /work/SRC/openSUSE:Factory/yast2-cluster/yast2-cluster.changes 2018-03-28 10:31:27.536878305 +0200 +++ /work/SRC/openSUSE:Factory/.yast2-cluster.new/yast2-cluster.changes 2018-03-29 11:57:23.018533983 +0200 @@ -1,0 +2,6 @@ +Wed Mar 28 10:11:42 UTC 2018 - nwang@suse.com + +- bsc#1087128, change the default cluster_name to hacluster +- Version 4.0.7 + +------------------------------------------------------------------- Old: ---- yast2-cluster-4.0.6.tar.bz2 New: ---- yast2-cluster-4.0.7.tar.bz2 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ yast2-cluster.spec ++++++ --- /var/tmp/diff_new_pack.17libz/_old 2018-03-29 11:57:23.798505826 +0200 +++ /var/tmp/diff_new_pack.17libz/_new 2018-03-29 11:57:23.798505826 +0200 @@ -18,7 +18,7 @@ Name: yast2-cluster %define _fwdefdir %{_libexecdir}/firewalld/services -Version: 4.0.6 +Version: 4.0.7 Release: 0 BuildRoot: %{_tmppath}/%{name}-%{version}-build ++++++ yast2-cluster-4.0.6.tar.bz2 -> yast2-cluster-4.0.7.tar.bz2 ++++++ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-cluster-4.0.6/package/yast2-cluster.changes new/yast2-cluster-4.0.7/package/yast2-cluster.changes --- old/yast2-cluster-4.0.6/package/yast2-cluster.changes 2018-03-26 14:09:32.000000000 +0200 +++ new/yast2-cluster-4.0.7/package/yast2-cluster.changes 2018-03-28 12:33:30.000000000 +0200 @@ -1,4 +1,10 @@ ------------------------------------------------------------------- +Wed Mar 28 10:11:42 UTC 2018 - nwang@suse.com + +- bsc#1087128, change the default cluster_name to hacluster +- Version 4.0.7 + +------------------------------------------------------------------- Fri Mar 23 09:49:15 UTC 2018 - nwang@suse.com - bsc#1086630, fix write err when upgrading without quorum section diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-cluster-4.0.6/package/yast2-cluster.spec new/yast2-cluster-4.0.7/package/yast2-cluster.spec --- old/yast2-cluster-4.0.6/package/yast2-cluster.spec 2018-03-26 14:09:32.000000000 +0200 +++ new/yast2-cluster-4.0.7/package/yast2-cluster.spec 2018-03-28 12:33:30.000000000 +0200 @@ -18,7 +18,7 @@ Name: yast2-cluster %define _fwdefdir %{_libexecdir}/firewalld/services -Version: 4.0.6 +Version: 4.0.7 Release: 0 BuildRoot: %{_tmppath}/%{name}-%{version}-build diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-cluster-4.0.6/src/include/cluster/dialogs.rb new/yast2-cluster-4.0.7/src/include/cluster/dialogs.rb --- old/yast2-cluster-4.0.6/src/include/cluster/dialogs.rb 2018-03-26 14:09:32.000000000 +0200 +++ new/yast2-cluster-4.0.7/src/include/cluster/dialogs.rb 2018-03-28 12:33:30.000000000 +0200 @@ -485,7 +485,7 @@ nid = VBox( HBox( - Left(InputField(Id(:cluster_name),Opt(:hstretch), _("Cluster Name:"))), + Left(InputField(Id(:cluster_name),Opt(:hstretch), _("Cluster Name:"),"hacluster")), Left(InputField(Id(:expected_votes),Opt(:hstretch), _("Expected Votes:"),"")), ComboBox( Id(:rrpmode), diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-cluster-4.0.6/src/include/cluster/helps.rb new/yast2-cluster-4.0.7/src/include/cluster/helps.rb --- old/yast2-cluster-4.0.6/src/include/cluster/helps.rb 2018-03-26 14:09:32.000000000 +0200 +++ new/yast2-cluster-4.0.7/src/include/cluster/helps.rb 2018-03-28 12:33:30.000000000 +0200 @@ -39,6 +39,7 @@ "<p><b><big>Member Address</big></b><br>This list specifies all the nodes in the cluster by IP address. This could be configurable when using udpu(Unicast). <br></p>\n" + "<p><b><big>Node ID</big></b><br>This configuration option is optional when using IPv4 and required when using IPv6. This is a 32 bit value specifying the node identifier delivered to the cluster membership service. If this is not specified with IPv4, the node id will be determined from the 32 bit IP address the system to which the system is bound with ring identifier of 0. The node identifier value of zero is reserved and should not be used.<br></p>\n" + "<p><b><big>rrp_mode</big></b><br>This specifies the mode of redundant ring, which may be none, active, or passive. Active replication offers slightly lower latency from transmit to delivery in faulty network environments but with less performance. Passive replication may nearly double the speed of the totem protocol if the protocol doesn't become cpu bound. The final option is none, in which case only one network interface will be used to operate the totem protocol. If only one interface directive is specified, none is automatically chosen. If multiple interface directives are specified, only active or passive may be chosen.<br></p>\n" + + "<p><b><big>Cluster Name</big></b><br>This specifies the name of cluster and it's used for automatic generating of multicast address. Default is hacluster. For a geo cluster, each cluster must have a unique name.<br></p>\n" + "<p><b><big>Expected votes</big></b><br>Expect vote number for voting quorum. Will be automatically calculated when the nodelist {} section is present in corosync.conf (the list will be generated when using unicast transport) or can be specified in the quorum {} section (Expect votes should use the total node numble of the cluster). If Expected votes presents in unicast transport, the value will override the one automatically calculated.<br></p>\n" + "<p><b><big>Auto Generate Node ID</big></b><br>Nodeid is required when using IPv6. Auto node ID enabled will generate nodeid automatically.<br></p>\n" ), diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-cluster-4.0.6/src/servers_non_y2/ag_openais new/yast2-cluster-4.0.7/src/servers_non_y2/ag_openais --- old/yast2-cluster-4.0.6/src/servers_non_y2/ag_openais 2018-03-26 14:09:32.000000000 +0200 +++ new/yast2-cluster-4.0.7/src/servers_non_y2/ag_openais 2018-03-28 12:33:30.000000000 +0200 @@ -59,7 +59,7 @@ }, "clear_node_high_bit":{"doc":"To make sure the auto-generated nodeid is positive", "default_value":"yes"}, - "cluster_name":{"doc":"This specifies the name of cluster","type":"string","default_value":"cluster"}, + "cluster_name":{"doc":"This specifies the name of cluster","type":"string","default_value":"hacluster"}, "secauth":{"doc":"HMAC/SHA1 should be used to authenticate all message", "default_value":"off"}, "rrp_mode":{"doc":"The mode for redundant ring. None is used when only 1 interface specified, otherwise, only active or passive may be choosen", @@ -630,7 +630,7 @@ elif path[1] == "transport": return '"%s"' % totem_options.get("transport", "udp") elif path[1] == "cluster_name": - return '"%s"' % totem_options.get("cluster_name", "cluster") + return '"%s"' % totem_options.get("cluster_name", "hacluster") elif path[1] == "ip_version": return '"%s"' % totem_options.get("ip_version", "ipv4") else: