Hello community, here is the log from the commit of package git for openSUSE:Factory checked in at 2013-02-01 15:47:18 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/git (Old) and /work/SRC/openSUSE:Factory/.git.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "git", Maintainer is "tiwai@suse.com" Changes: -------- --- /work/SRC/openSUSE:Factory/git/git.changes 2013-01-17 15:10:05.000000000 +0100 +++ /work/SRC/openSUSE:Factory/.git.new/git.changes 2013-02-01 15:47:21.000000000 +0100 @@ -1,0 +2,25 @@ +Wed Jan 30 01:57:15 UTC 2013 - douglarek@outlook.com + +- updated to version 1.8.1.2: + + * An element on GIT_CEILING_DIRECTORIES list that does not name the + real path to a directory (i.e. a symbolic link) could have caused + the GIT_DIR discovery logic to escape the ceiling. + + * Command line completion for "tcsh" emitted an unwanted space + after completing a single directory name. + + * Command line completion leaked an unnecessary error message while + looking for possible matches with paths in <tree-ish>. + + * "git archive" did not record uncompressed size in the header when + streaming a zip archive, which confused some implementations of unzip. + + * When users spelled "cc:" in lowercase in the fake "header" in the + trailer part, "git send-email" failed to pick up the addresses from + there. As e-mail headers field names are case insensitive, this + script should follow suit and treat "cc:" and "Cc:" the same way. + + Also contains various documentation fixes. + +------------------------------------------------------------------- Old: ---- git-1.8.1.1.tar.gz New: ---- git-1.8.1.2.tar.gz ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ git.spec ++++++ --- /var/tmp/diff_new_pack.L2B1lW/_old 2013-02-01 15:47:24.000000000 +0100 +++ /var/tmp/diff_new_pack.L2B1lW/_new 2013-02-01 15:47:24.000000000 +0100 @@ -30,7 +30,7 @@ BuildRequires: python BuildRequires: sgml-skel BuildRequires: xmlto -Version: 1.8.1.1 +Version: 1.8.1.2 Release: 0 Summary: Fast, scalable, distributed revision control system License: GPL-2.0 ++++++ git-1.8.1.1.tar.gz -> git-1.8.1.2.tar.gz ++++++ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/git-1.8.1.1/Documentation/RelNotes/1.8.1.2.txt new/git-1.8.1.2/Documentation/RelNotes/1.8.1.2.txt --- old/git-1.8.1.1/Documentation/RelNotes/1.8.1.2.txt 1970-01-01 01:00:00.000000000 +0100 +++ new/git-1.8.1.2/Documentation/RelNotes/1.8.1.2.txt 2013-01-28 21:01:51.000000000 +0100 @@ -0,0 +1,25 @@ +Git 1.8.1.2 Release Notes +========================= + +Fixes since v1.8.1.1 +-------------------- + + * An element on GIT_CEILING_DIRECTORIES list that does not name the + real path to a directory (i.e. a symbolic link) could have caused + the GIT_DIR discovery logic to escape the ceiling. + + * Command line completion for "tcsh" emitted an unwanted space + after completing a single directory name. + + * Command line completion leaked an unnecessary error message while + looking for possible matches with paths in <tree-ish>. + + * "git archive" did not record uncompressed size in the header when + streaming a zip archive, which confused some implementations of unzip. + + * When users spelled "cc:" in lowercase in the fake "header" in the + trailer part, "git send-email" failed to pick up the addresses from + there. As e-mail headers field names are case insensitive, this + script should follow suit and treat "cc:" and "Cc:" the same way. + +Also contains various documentation fixes. diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/git-1.8.1.1/Documentation/config.txt new/git-1.8.1.2/Documentation/config.txt --- old/git-1.8.1.1/Documentation/config.txt 2013-01-14 20:22:04.000000000 +0100 +++ new/git-1.8.1.2/Documentation/config.txt 2013-01-28 21:01:51.000000000 +0100 @@ -1351,6 +1351,12 @@ value is 0 - the command will be just shown but not executed. This is the default. +help.htmlpath:: + Specify the path where the HTML documentation resides. File system paths + and URLs are supported. HTML pages will be prefixed with this path when + help is displayed in the 'web' format. This defaults to the documentation + path of your Git installation. + http.proxy:: Override the HTTP proxy, normally configured using the 'http_proxy', 'https_proxy', and 'all_proxy' environment variables (see diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/git-1.8.1.1/Documentation/git-commit-tree.txt new/git-1.8.1.2/Documentation/git-commit-tree.txt --- old/git-1.8.1.1/Documentation/git-commit-tree.txt 2013-01-14 20:22:04.000000000 +0100 +++ new/git-1.8.1.2/Documentation/git-commit-tree.txt 2013-01-28 21:01:51.000000000 +0100 @@ -72,13 +72,13 @@ GIT_COMMITTER_NAME GIT_COMMITTER_EMAIL GIT_COMMITTER_DATE - EMAIL (nb "<", ">" and "\n"s are stripped) In case (some of) these environment variables are not set, the information is taken from the configuration items user.name and user.email, or, if not -present, system user name and the hostname used for outgoing mail (taken +present, the environment variable EMAIL, or, if that is not set, +system user name and the hostname used for outgoing mail (taken from `/etc/mailname` and falling back to the fully qualified hostname when that file does not exist). diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/git-1.8.1.1/Documentation/git-cvsimport.txt new/git-1.8.1.2/Documentation/git-cvsimport.txt --- old/git-1.8.1.1/Documentation/git-cvsimport.txt 2013-01-14 20:22:04.000000000 +0100 +++ new/git-1.8.1.2/Documentation/git-cvsimport.txt 2013-01-28 21:01:51.000000000 +0100 @@ -213,11 +213,9 @@ * Multiple tags on the same revision are not imported. If you suspect that any of these issues may apply to the repository you -want to import consider using these alternative tools which proved to be -more stable in practice: +want to imort, consider using cvs2git: -* cvs2git (part of cvs2svn), `http://cvs2svn.tigris.org` -* parsecvs, `http://cgit.freedesktop.org/~keithp/parsecvs` +* cvs2git (part of cvs2svn), `http://subversion.apache.org/` GIT --- diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/git-1.8.1.1/Documentation/git-for-each-ref.txt new/git-1.8.1.2/Documentation/git-for-each-ref.txt --- old/git-1.8.1.1/Documentation/git-for-each-ref.txt 2013-01-14 20:22:04.000000000 +0100 +++ new/git-1.8.1.2/Documentation/git-for-each-ref.txt 2013-01-28 21:01:51.000000000 +0100 @@ -117,7 +117,7 @@ As a special case for the date-type fields, you may specify a format for the date by adding one of `:default`, `:relative`, `:short`, `:local`, -`:iso8601` or `:rfc2822` to the end of the fieldname; e.g. +`:iso8601`, `:rfc2822` or `:raw` to the end of the fieldname; e.g. `%(taggerdate:relative)`. diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/git-1.8.1.1/Documentation/technical/api-string-list.txt new/git-1.8.1.2/Documentation/technical/api-string-list.txt --- old/git-1.8.1.1/Documentation/technical/api-string-list.txt 2013-01-14 20:22:04.000000000 +0100 +++ new/git-1.8.1.2/Documentation/technical/api-string-list.txt 2013-01-28 21:01:51.000000000 +0100 @@ -82,14 +82,6 @@ call free() on the util members of any items that have to be deleted. Preserve the order of the items that are retained. -`string_list_longest_prefix`:: - - Return the longest string within a string_list that is a - prefix (in the sense of prefixcmp()) of the specified string, - or NULL if no such prefix exists. This function does not - require the string_list to be sorted (it does a linear - search). - `print_string_list`:: Dump a string_list to stdout, useful mainly for debugging purposes. It diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/git-1.8.1.1/GIT-VERSION-GEN new/git-1.8.1.2/GIT-VERSION-GEN --- old/git-1.8.1.1/GIT-VERSION-GEN 2013-01-14 20:22:04.000000000 +0100 +++ new/git-1.8.1.2/GIT-VERSION-GEN 2013-01-28 21:01:51.000000000 +0100 @@ -1,7 +1,7 @@ #!/bin/sh GVF=GIT-VERSION-FILE -DEF_VER=v1.8.1.1 +DEF_VER=v1.8.1.2 LF=' ' diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/git-1.8.1.1/RelNotes new/git-1.8.1.2/RelNotes --- old/git-1.8.1.1/RelNotes 2013-02-01 15:47:25.000000000 +0100 +++ new/git-1.8.1.2/RelNotes 2013-02-01 15:47:25.000000000 +0100 @@ -1 +1 @@ -symbolic link to Documentation/RelNotes/1.8.1.1.txt +symbolic link to Documentation/RelNotes/1.8.1.2.txt diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/git-1.8.1.1/abspath.c new/git-1.8.1.2/abspath.c --- old/git-1.8.1.1/abspath.c 2013-01-14 20:22:04.000000000 +0100 +++ new/git-1.8.1.2/abspath.c 2013-01-28 21:01:51.000000000 +0100 @@ -15,16 +15,34 @@ #define MAXDEPTH 5 /* - * Use this to get the real path, i.e. resolve links. If you want an - * absolute path but don't mind links, use absolute_path. + * Return the real path (i.e., absolute path, with symlinks resolved + * and extra slashes removed) equivalent to the specified path. (If + * you want an absolute path but don't mind links, use + * absolute_path().) The return value is a pointer to a static + * buffer. + * + * The input and all intermediate paths must be shorter than MAX_PATH. + * The directory part of path (i.e., everything up to the last + * dir_sep) must denote a valid, existing directory, but the last + * component need not exist. If die_on_error is set, then die with an + * informative error message if there is a problem. Otherwise, return + * NULL on errors (without generating any output). * * If path is our buffer, then return path, as it's already what the * user wants. */ -const char *real_path(const char *path) +static const char *real_path_internal(const char *path, int die_on_error) { static char bufs[2][PATH_MAX + 1], *buf = bufs[0], *next_buf = bufs[1]; + char *retval = NULL; + + /* + * If we have to temporarily chdir(), store the original CWD + * here so that we can chdir() back to it at the end of the + * function: + */ char cwd[1024] = ""; + int buf_index = 1; int depth = MAXDEPTH; @@ -35,11 +53,19 @@ if (path == buf || path == next_buf) return path; - if (!*path) - die("The empty string is not a valid path"); + if (!*path) { + if (die_on_error) + die("The empty string is not a valid path"); + else + goto error_out; + } - if (strlcpy(buf, path, PATH_MAX) >= PATH_MAX) - die ("Too long path: %.*s", 60, path); + if (strlcpy(buf, path, PATH_MAX) >= PATH_MAX) { + if (die_on_error) + die("Too long path: %.*s", 60, path); + else + goto error_out; + } while (depth--) { if (!is_directory(buf)) { @@ -54,20 +80,36 @@ } if (*buf) { - if (!*cwd && !getcwd(cwd, sizeof(cwd))) - die_errno ("Could not get current working directory"); + if (!*cwd && !getcwd(cwd, sizeof(cwd))) { + if (die_on_error) + die_errno("Could not get current working directory"); + else + goto error_out; + } - if (chdir(buf)) - die_errno ("Could not switch to '%s'", buf); + if (chdir(buf)) { + if (die_on_error) + die_errno("Could not switch to '%s'", buf); + else + goto error_out; + } + } + if (!getcwd(buf, PATH_MAX)) { + if (die_on_error) + die_errno("Could not get current working directory"); + else + goto error_out; } - if (!getcwd(buf, PATH_MAX)) - die_errno ("Could not get current working directory"); if (last_elem) { size_t len = strlen(buf); - if (len + strlen(last_elem) + 2 > PATH_MAX) - die ("Too long path name: '%s/%s'", - buf, last_elem); + if (len + strlen(last_elem) + 2 > PATH_MAX) { + if (die_on_error) + die("Too long path name: '%s/%s'", + buf, last_elem); + else + goto error_out; + } if (len && !is_dir_sep(buf[len-1])) buf[len++] = '/'; strcpy(buf + len, last_elem); @@ -77,10 +119,18 @@ if (!lstat(buf, &st) && S_ISLNK(st.st_mode)) { ssize_t len = readlink(buf, next_buf, PATH_MAX); - if (len < 0) - die_errno ("Invalid symlink '%s'", buf); - if (PATH_MAX <= len) - die("symbolic link too long: %s", buf); + if (len < 0) { + if (die_on_error) + die_errno("Invalid symlink '%s'", buf); + else + goto error_out; + } + if (PATH_MAX <= len) { + if (die_on_error) + die("symbolic link too long: %s", buf); + else + goto error_out; + } next_buf[len] = '\0'; buf = next_buf; buf_index = 1 - buf_index; @@ -89,10 +139,23 @@ break; } + retval = buf; +error_out: + free(last_elem); if (*cwd && chdir(cwd)) die_errno ("Could not change back to '%s'", cwd); - return buf; + return retval; +} + +const char *real_path(const char *path) +{ + return real_path_internal(path, 1); +} + +const char *real_path_if_valid(const char *path) +{ + return real_path_internal(path, 0); } static const char *get_pwd_cwd(void) diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/git-1.8.1.1/archive-zip.c new/git-1.8.1.2/archive-zip.c --- old/git-1.8.1.1/archive-zip.c 2013-01-14 20:22:04.000000000 +0100 +++ new/git-1.8.1.2/archive-zip.c 2013-01-28 21:01:51.000000000 +0100 @@ -240,7 +240,7 @@ (mode & 0111) ? ((mode) << 16) : 0; if (S_ISREG(mode) && args->compression_level != 0 && size > 0) method = 8; - compressed_size = size; + compressed_size = (method == 0) ? size : 0; if (S_ISREG(mode) && type == OBJ_BLOB && !args->convert && size > big_file_threshold) { @@ -313,10 +313,7 @@ copy_le16(header.compression_method, method); copy_le16(header.mtime, zip_time); copy_le16(header.mdate, zip_date); - if (flags & ZIP_STREAM) - set_zip_header_data_desc(&header, 0, 0, 0); - else - set_zip_header_data_desc(&header, size, compressed_size, crc); + set_zip_header_data_desc(&header, size, compressed_size, crc); copy_le16(header.filename_length, pathlen); copy_le16(header.extra_length, ZIP_EXTRA_MTIME_SIZE); write_or_die(1, &header, ZIP_LOCAL_HEADER_SIZE); diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/git-1.8.1.1/attr.c new/git-1.8.1.2/attr.c --- old/git-1.8.1.1/attr.c 2013-01-14 20:22:04.000000000 +0100 +++ new/git-1.8.1.2/attr.c 2013-01-28 21:01:51.000000000 +0100 @@ -704,7 +704,7 @@ if (*n == ATTR__UNKNOWN) { debug_set(what, - a->is_macro ? a->u.attr->name : a->u.pattern, + a->is_macro ? a->u.attr->name : a->u.pat.pattern, attr, v); *n = v; rem--; diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/git-1.8.1.1/cache.h new/git-1.8.1.2/cache.h --- old/git-1.8.1.1/cache.h 2013-01-14 20:22:04.000000000 +0100 +++ new/git-1.8.1.2/cache.h 2013-01-28 21:01:51.000000000 +0100 @@ -714,10 +714,11 @@ } int is_directory(const char *); const char *real_path(const char *path); +const char *real_path_if_valid(const char *path); const char *absolute_path(const char *path); const char *relative_path(const char *abs, const char *base); int normalize_path_copy(char *dst, const char *src); -int longest_ancestor_length(const char *path, const char *prefix_list); +int longest_ancestor_length(const char *path, struct string_list *prefixes); char *strip_path_suffix(const char *path, const char *suffix); int daemon_avoid_alias(const char *path); int offset_1st_component(const char *path); diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/git-1.8.1.1/configure new/git-1.8.1.2/configure --- old/git-1.8.1.1/configure 2013-01-14 20:22:04.000000000 +0100 +++ new/git-1.8.1.2/configure 2013-01-28 21:01:52.000000000 +0100 @@ -1,6 +1,6 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.67 for git 1.8.1.1. +# Generated by GNU Autoconf 2.67 for git 1.8.1.2. # # Report bugs to <git@vger.kernel.org>. # @@ -552,8 +552,8 @@ # Identity of this package. PACKAGE_NAME='git' PACKAGE_TARNAME='git' -PACKAGE_VERSION='1.8.1.1' -PACKAGE_STRING='git 1.8.1.1' +PACKAGE_VERSION='1.8.1.2' +PACKAGE_STRING='git 1.8.1.2' PACKAGE_BUGREPORT='git@vger.kernel.org' PACKAGE_URL='' @@ -1224,7 +1224,7 @@ # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF -\`configure' configures git 1.8.1.1 to adapt to many kinds of systems. +\`configure' configures git 1.8.1.2 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... @@ -1285,7 +1285,7 @@ if test -n "$ac_init_help"; then case $ac_init_help in - short | recursive ) echo "Configuration of git 1.8.1.1:";; + short | recursive ) echo "Configuration of git 1.8.1.2:";; esac cat <<\_ACEOF @@ -1424,7 +1424,7 @@ test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF -git configure 1.8.1.1 +git configure 1.8.1.2 generated by GNU Autoconf 2.67 Copyright (C) 2010 Free Software Foundation, Inc. @@ -1904,7 +1904,7 @@ This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. -It was created by git $as_me 1.8.1.1, which was +It was created by git $as_me 1.8.1.2, which was generated by GNU Autoconf 2.67. Invocation command line was $ $0 $@ @@ -7128,7 +7128,7 @@ # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. ac_log=" -This file was extended by git $as_me 1.8.1.1, which was +This file was extended by git $as_me 1.8.1.2, which was generated by GNU Autoconf 2.67. Invocation command line was CONFIG_FILES = $CONFIG_FILES @@ -7185,7 +7185,7 @@ cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" ac_cs_version="\\ -git config.status 1.8.1.1 +git config.status 1.8.1.2 configured by $0, generated by GNU Autoconf 2.67, with options \\"\$ac_cs_config\\" diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/git-1.8.1.1/contrib/completion/git-completion.bash new/git-1.8.1.2/contrib/completion/git-completion.bash --- old/git-1.8.1.1/contrib/completion/git-completion.bash 2013-01-14 20:22:04.000000000 +0100 +++ new/git-1.8.1.2/contrib/completion/git-completion.bash 2013-01-28 21:01:51.000000000 +0100 @@ -397,7 +397,7 @@ *) pfx="$ref:$pfx" ;; esac - __gitcomp_nl "$(git --git-dir="$(__gitdir)" ls-tree "$ls" \ + __gitcomp_nl "$(git --git-dir="$(__gitdir)" ls-tree "$ls" 2>/dev/null \ | sed '/^100... blob /{ s,^.* ,, s,$, , diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/git-1.8.1.1/contrib/completion/git-completion.tcsh new/git-1.8.1.2/contrib/completion/git-completion.tcsh --- old/git-1.8.1.1/contrib/completion/git-completion.tcsh 2013-01-14 20:22:04.000000000 +0100 +++ new/git-1.8.1.2/contrib/completion/git-completion.tcsh 2013-01-28 21:01:51.000000000 +0100 @@ -13,6 +13,7 @@ # # To use this completion script: # +# 0) You need tcsh 6.16.00 or newer. # 1) Copy both this file and the bash completion script to ${HOME}. # You _must_ use the name ${HOME}/.git-completion.bash for the # bash script. @@ -24,6 +25,15 @@ # set autolist=ambiguous # It will tell tcsh to list the possible completion choices. +set __git_tcsh_completion_version = `\echo ${tcsh} | \sed 's/\./ /g'` +if ( ${__git_tcsh_completion_version[1]} < 6 || \ + ( ${__git_tcsh_completion_version[1]} == 6 && \ + ${__git_tcsh_completion_version[2]} < 16 ) ) then + echo "git-completion.tcsh: Your version of tcsh is too old, you need version 6.16.00 or newer. Git completion will not work." + exit +endif +unset __git_tcsh_completion_version + set __git_tcsh_completion_original_script = ${HOME}/.git-completion.bash set __git_tcsh_completion_script = ${HOME}/.git-completion.tcsh.bash @@ -64,9 +74,7 @@ _\${1} IFS=\$'\n' -if [ \${#COMPREPLY[*]} -gt 0 ]; then - echo "\${COMPREPLY[*]}" | sort | uniq -else +if [ \${#COMPREPLY[*]} -eq 0 ]; then # No completions suggested. In this case, we want tcsh to perform # standard file completion. However, there does not seem to be way # to tell tcsh to do that. To help the user, we try to simulate @@ -85,19 +93,20 @@ # We don't support ~ expansion: too tricky. if [ "\${TO_COMPLETE:0:1}" != "~" ]; then # Use ls so as to add the '/' at the end of directories. - RESULT=(\`ls -dp \${TO_COMPLETE}* 2> /dev/null\`) - echo \${RESULT[*]} - - # If there is a single completion and it is a directory, - # we output it a second time to trick tcsh into not adding a space - # after it. - if [ \${#RESULT[*]} -eq 1 ] && [ "\${RESULT[0]: -1}" == "/" ]; then - echo \${RESULT[*]} - fi + COMPREPLY=(\`ls -dp \${TO_COMPLETE}* 2> /dev/null\`) fi fi fi +# tcsh does not automatically remove duplicates, so we do it ourselves +echo "\${COMPREPLY[*]}" | sort | uniq + +# If there is a single completion and it is a directory, we output it +# a second time to trick tcsh into not adding a space after it. +if [ \${#COMPREPLY[*]} -eq 1 ] && [ "\${COMPREPLY[0]: -1}" == "/" ]; then + echo "\${COMPREPLY[*]}" +fi + EOF # Don't need this variable anymore, so don't pollute the users environment diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/git-1.8.1.1/contrib/vim/README new/git-1.8.1.2/contrib/vim/README --- old/git-1.8.1.1/contrib/vim/README 2013-01-14 20:22:04.000000000 +0100 +++ new/git-1.8.1.2/contrib/vim/README 2013-01-28 21:01:51.000000000 +0100 @@ -17,16 +17,6 @@ 1. Copy these files to vim's syntax directory $HOME/.vim/syntax 2. To auto-detect the editing of various git-related filetypes: - $ cat >>$HOME/.vim/filetype.vim <<'EOF' - autocmd BufNewFile,BufRead *.git/COMMIT_EDITMSG setf gitcommit - autocmd BufNewFile,BufRead *.git/config,.gitconfig setf gitconfig - autocmd BufNewFile,BufRead git-rebase-todo setf gitrebase - autocmd BufNewFile,BufRead .msg.[0-9]* - \ if getline(1) =~ '^From.*# This line is ignored.$' | - \ setf gitsendemail | - \ endif - autocmd BufNewFile,BufRead *.git/** - \ if getline(1) =~ '^\x\{40\}\>\|^ref: ' | - \ setf git | - \ endif - EOF + + $ curl http://ftp.vim.org/pub/vim/runtime/filetype.vim | + sed -ne '/^" Git$/, /^$/ p' >>$HOME/.vim/filetype.vim diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/git-1.8.1.1/dir.c new/git-1.8.1.2/dir.c --- old/git-1.8.1.1/dir.c 2013-01-14 20:22:04.000000000 +0100 +++ new/git-1.8.1.2/dir.c 2013-01-28 21:01:51.000000000 +0100 @@ -732,7 +732,8 @@ static struct dir_entry *dir_add_name(struct dir_struct *dir, const char *pathname, int len) { - if (cache_name_exists(pathname, len, ignore_case)) + if (!(dir->flags & DIR_SHOW_IGNORED) && + cache_name_exists(pathname, len, ignore_case)) return NULL; ALLOC_GROW(dir->entries, dir->nr+1, dir->alloc); @@ -834,8 +835,9 @@ * traversal routine. * * Case 1: If we *already* have entries in the index under that - * directory name, we always recurse into the directory to see - * all the files. + * directory name, we recurse into the directory to see all the files, + * unless the directory is excluded and we want to show ignored + * directories * * Case 2: If we *already* have that directory name as a gitlink, * we always continue to see it as a gitlink, regardless of whether @@ -849,6 +851,9 @@ * just a directory, unless "hide_empty_directories" is * also true and the directory is empty, in which case * we just ignore it entirely. + * if we are looking for ignored directories, look if it + * contains only ignored files to decide if it must be shown as + * ignored or not. * (b) if it looks like a git directory, and we don't have * 'no_gitlinks' set we treat it as a gitlink, and show it * as a directory. @@ -861,12 +866,15 @@ }; static enum directory_treatment treat_directory(struct dir_struct *dir, - const char *dirname, int len, + const char *dirname, int len, int exclude, const struct path_simplify *simplify) { /* The "len-1" is to strip the final '/' */ switch (directory_exists_in_index(dirname, len-1)) { case index_directory: + if ((dir->flags & DIR_SHOW_OTHER_DIRECTORIES) && exclude) + break; + return recurse_into_directory; case index_gitdir: @@ -886,7 +894,23 @@ } /* This is the "show_other_directories" case */ - if (!(dir->flags & DIR_HIDE_EMPTY_DIRECTORIES)) + + /* + * We are looking for ignored files and our directory is not ignored, + * check if it contains only ignored files + */ + if ((dir->flags & DIR_SHOW_IGNORED) && !exclude) { + int ignored; + dir->flags &= ~DIR_SHOW_IGNORED; + dir->flags |= DIR_HIDE_EMPTY_DIRECTORIES; + ignored = read_directory_recursive(dir, dirname, len, 1, simplify); + dir->flags &= ~DIR_HIDE_EMPTY_DIRECTORIES; + dir->flags |= DIR_SHOW_IGNORED; + + return ignored ? ignore_directory : show_directory; + } + if (!(dir->flags & DIR_SHOW_IGNORED) && + !(dir->flags & DIR_HIDE_EMPTY_DIRECTORIES)) return show_directory; if (!read_directory_recursive(dir, dirname, len, 1, simplify)) return ignore_directory; @@ -894,6 +918,45 @@ } /* + * Decide what to do when we find a file while traversing the + * filesystem. Mostly two cases: + * + * 1. We are looking for ignored files + * (a) File is ignored, include it + * (b) File is in ignored path, include it + * (c) File is not ignored, exclude it + * + * 2. Other scenarios, include the file if not excluded + * + * Return 1 for exclude, 0 for include. + */ +static int treat_file(struct dir_struct *dir, struct strbuf *path, int exclude, int *dtype) +{ + struct path_exclude_check check; + int exclude_file = 0; + + if (exclude) + exclude_file = !(dir->flags & DIR_SHOW_IGNORED); + else if (dir->flags & DIR_SHOW_IGNORED) { + /* Always exclude indexed files */ + struct cache_entry *ce = index_name_exists(&the_index, + path->buf, path->len, ignore_case); + + if (ce) + return 1; + + path_exclude_check_init(&check, dir); + + if (!path_excluded(&check, path->buf, path->len, dtype)) + exclude_file = 1; + + path_exclude_check_clear(&check); + } + + return exclude_file; +} + +/* * This is an inexact early pruning of any recursive directory * reading - if the path cannot possibly be in the pathspec, * return true, and we'll skip it early. @@ -1031,27 +1094,14 @@ if (dtype == DT_UNKNOWN) dtype = get_dtype(de, path->buf, path->len); - /* - * Do we want to see just the ignored files? - * We still need to recurse into directories, - * even if we don't ignore them, since the - * directory may contain files that we do.. - */ - if (!exclude && (dir->flags & DIR_SHOW_IGNORED)) { - if (dtype != DT_DIR) - return path_ignored; - } - switch (dtype) { default: return path_ignored; case DT_DIR: strbuf_addch(path, '/'); - switch (treat_directory(dir, path->buf, path->len, simplify)) { + + switch (treat_directory(dir, path->buf, path->len, exclude, simplify)) { case show_directory: - if (exclude != !!(dir->flags - & DIR_SHOW_IGNORED)) - return path_ignored; break; case recurse_into_directory: return path_recurse; @@ -1061,7 +1111,12 @@ break; case DT_REG: case DT_LNK: - break; + switch (treat_file(dir, path, exclude, &dtype)) { + case 1: + return path_ignored; + default: + break; + } } return path_handled; } diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/git-1.8.1.1/git-send-email.perl new/git-1.8.1.2/git-send-email.perl --- old/git-1.8.1.1/git-send-email.perl 2013-01-14 20:22:04.000000000 +0100 +++ new/git-1.8.1.2/git-send-email.perl 2013-01-28 21:01:51.000000000 +0100 @@ -1285,10 +1285,10 @@ } if (defined $input_format && $input_format eq 'mbox') { - if (/^Subject:\s+(.*)$/) { + if (/^Subject:\s+(.*)$/i) { $subject = $1; } - elsif (/^From:\s+(.*)$/) { + elsif (/^From:\s+(.*)$/i) { ($author, $author_encoding) = unquote_rfc2047($1); next if $suppress_cc{'author'}; next if $suppress_cc{'self'} and $author eq $sender; @@ -1296,14 +1296,14 @@ $1, $_) unless $quiet; push @cc, $1; } - elsif (/^To:\s+(.*)$/) { + elsif (/^To:\s+(.*)$/i) { foreach my $addr (parse_address_line($1)) { printf("(mbox) Adding to: %s from line '%s'\n", $addr, $_) unless $quiet; push @to, $addr; } } - elsif (/^Cc:\s+(.*)$/) { + elsif (/^Cc:\s+(.*)$/i) { foreach my $addr (parse_address_line($1)) { if (unquote_rfc2047($addr) eq $sender) { next if ($suppress_cc{'self'}); @@ -1325,7 +1325,7 @@ elsif (/^Message-Id: (.*)/i) { $message_id = $1; } - elsif (!/^Date:\s/ && /^[-A-Za-z]+:\s+\S/) { + elsif (!/^Date:\s/i && /^[-A-Za-z]+:\s+\S/) { push @xh, $_; } diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/git-1.8.1.1/git.spec new/git-1.8.1.2/git.spec --- old/git-1.8.1.1/git.spec 2013-01-14 20:22:04.000000000 +0100 +++ new/git-1.8.1.2/git.spec 2013-01-28 21:01:52.000000000 +0100 @@ -1,7 +1,7 @@ # Pass --without docs to rpmbuild if you don't want the documentation Name: git -Version: 1.8.1.1 +Version: 1.8.1.2 Release: 1%{?dist} Summary: Core git tools License: GPL diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/git-1.8.1.1/path.c new/git-1.8.1.2/path.c --- old/git-1.8.1.1/path.c 2013-01-14 20:22:04.000000000 +0100 +++ new/git-1.8.1.2/path.c 2013-01-28 21:01:51.000000000 +0100 @@ -12,6 +12,7 @@ */ #include "cache.h" #include "strbuf.h" +#include "string-list.h" static char bad_path[] = "/bad-path/"; @@ -569,43 +570,38 @@ /* * path = Canonical absolute path - * prefix_list = Colon-separated list of absolute paths + * prefixes = string_list containing normalized, absolute paths without + * trailing slashes (except for the root directory, which is denoted by "/"). * - * Determines, for each path in prefix_list, whether the "prefix" really + * Determines, for each path in prefixes, whether the "prefix" * is an ancestor directory of path. Returns the length of the longest * ancestor directory, excluding any trailing slashes, or -1 if no prefix - * is an ancestor. (Note that this means 0 is returned if prefix_list is - * "/".) "/foo" is not considered an ancestor of "/foobar". Directories + * is an ancestor. (Note that this means 0 is returned if prefixes is + * ["/"].) "/foo" is not considered an ancestor of "/foobar". Directories * are not considered to be their own ancestors. path must be in a * canonical form: empty components, or "." or ".." components are not - * allowed. prefix_list may be null, which is like "". + * allowed. */ -int longest_ancestor_length(const char *path, const char *prefix_list) +int longest_ancestor_length(const char *path, struct string_list *prefixes) { - char buf[PATH_MAX+1]; - const char *ceil, *colon; - int len, max_len = -1; + int i, max_len = -1; - if (prefix_list == NULL || !strcmp(path, "/")) + if (!strcmp(path, "/")) return -1; - for (colon = ceil = prefix_list; *colon; ceil = colon+1) { - for (colon = ceil; *colon && *colon != PATH_SEP; colon++); - len = colon - ceil; - if (len == 0 || len > PATH_MAX || !is_absolute_path(ceil)) - continue; - strlcpy(buf, ceil, len+1); - if (normalize_path_copy(buf, buf) < 0) - continue; - len = strlen(buf); - if (len > 0 && buf[len-1] == '/') - buf[--len] = '\0'; - - if (!strncmp(path, buf, len) && - path[len] == '/' && - len > max_len) { + for (i = 0; i < prefixes->nr; i++) { + const char *ceil = prefixes->items[i].string; + int len = strlen(ceil); + + if (len == 1 && ceil[0] == '/') + len = 0; /* root matches anything, with length 0 */ + else if (!strncmp(path, ceil, len) && path[len] == '/') + ; /* match of length len */ + else + continue; /* no match */ + + if (len > max_len) max_len = len; - } } return max_len; diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/git-1.8.1.1/setup.c new/git-1.8.1.2/setup.c --- old/git-1.8.1.1/setup.c 2013-01-14 20:22:04.000000000 +0100 +++ new/git-1.8.1.2/setup.c 2013-01-28 21:01:51.000000000 +0100 @@ -1,5 +1,6 @@ #include "cache.h" #include "dir.h" +#include "string-list.h" static int inside_git_dir = -1; static int inside_work_tree = -1; @@ -621,16 +622,38 @@ } /* + * A "string_list_each_func_t" function that canonicalizes an entry + * from GIT_CEILING_DIRECTORIES using real_path_if_valid(), or + * discards it if unusable. + */ +static int canonicalize_ceiling_entry(struct string_list_item *item, + void *unused) +{ + char *ceil = item->string; + const char *real_path; + + if (!*ceil || !is_absolute_path(ceil)) + return 0; + real_path = real_path_if_valid(ceil); + if (!real_path) + return 0; + free(item->string); + item->string = xstrdup(real_path); + return 1; +} + +/* * We cannot decide in this function whether we are in the work tree or * not, since the config can only be read _after_ this function was called. */ static const char *setup_git_directory_gently_1(int *nongit_ok) { const char *env_ceiling_dirs = getenv(CEILING_DIRECTORIES_ENVIRONMENT); + struct string_list ceiling_dirs = STRING_LIST_INIT_DUP; static char cwd[PATH_MAX+1]; const char *gitdirenv, *ret; char *gitfile; - int len, offset, offset_parent, ceil_offset; + int len, offset, offset_parent, ceil_offset = -1; dev_t current_device = 0; int one_filesystem = 1; @@ -655,7 +678,14 @@ if (gitdirenv) return setup_explicit_git_dir(gitdirenv, cwd, len, nongit_ok); - ceil_offset = longest_ancestor_length(cwd, env_ceiling_dirs); + if (env_ceiling_dirs) { + string_list_split(&ceiling_dirs, env_ceiling_dirs, PATH_SEP, -1); + filter_string_list(&ceiling_dirs, 0, + canonicalize_ceiling_entry, NULL); + ceil_offset = longest_ancestor_length(cwd, &ceiling_dirs); + string_list_clear(&ceiling_dirs, 0); + } + if (ceil_offset < 0 && has_dos_drive_prefix(cwd)) ceil_offset = 1; diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/git-1.8.1.1/string-list.c new/git-1.8.1.2/string-list.c --- old/git-1.8.1.1/string-list.c 2013-01-14 20:22:04.000000000 +0100 +++ new/git-1.8.1.2/string-list.c 2013-01-28 21:01:51.000000000 +0100 @@ -145,26 +145,6 @@ filter_string_list(list, free_util, item_is_not_empty, NULL); } -char *string_list_longest_prefix(const struct string_list *prefixes, - const char *string) -{ - int i, max_len = -1; - char *retval = NULL; - - for (i = 0; i < prefixes->nr; i++) { - char *prefix = prefixes->items[i].string; - if (!prefixcmp(string, prefix)) { - int len = strlen(prefix); - if (len > max_len) { - retval = prefix; - max_len = len; - } - } - } - - return retval; -} - void string_list_clear(struct string_list *list, int free_util) { if (list->items) { diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/git-1.8.1.1/string-list.h new/git-1.8.1.2/string-list.h --- old/git-1.8.1.1/string-list.h 2013-01-14 20:22:04.000000000 +0100 +++ new/git-1.8.1.2/string-list.h 2013-01-28 21:01:51.000000000 +0100 @@ -45,15 +45,6 @@ */ void string_list_remove_empty_items(struct string_list *list, int free_util); -/* - * Return the longest string in prefixes that is a prefix (in the - * sense of prefixcmp()) of string, or NULL if no such prefix exists. - * This function does not require the string_list to be sorted (it - * does a linear search). - */ -char *string_list_longest_prefix(const struct string_list *prefixes, const char *string); - - /* Use these functions only on sorted lists: */ int string_list_has_string(const struct string_list *list, const char *string); int string_list_find_insert_index(const struct string_list *list, const char *string, diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/git-1.8.1.1/t/t0024-crlf-archive.sh new/git-1.8.1.2/t/t0024-crlf-archive.sh --- old/git-1.8.1.1/t/t0024-crlf-archive.sh 2013-01-14 20:22:04.000000000 +0100 +++ new/git-1.8.1.2/t/t0024-crlf-archive.sh 2013-01-28 21:01:51.000000000 +0100 @@ -3,7 +3,12 @@ test_description='respect crlf in git archive' . ./test-lib.sh -UNZIP=${UNZIP:-unzip} +GIT_UNZIP=${GIT_UNZIP:-unzip} + +test_lazy_prereq UNZIP ' + "$GIT_UNZIP" -v + test $? -ne 127 +' test_expect_success setup ' @@ -26,18 +31,11 @@ ' -"$UNZIP" -v >/dev/null 2>&1 -if [ $? -eq 127 ]; then - say "Skipping ZIP test, because unzip was not found" -else - test_set_prereq UNZIP -fi - test_expect_success UNZIP 'zip archive' ' git archive --format=zip HEAD >test.zip && - ( mkdir unzipped && cd unzipped && unzip ../test.zip ) && + ( mkdir unzipped && cd unzipped && "$GIT_UNZIP" ../test.zip ) && test_cmp sample unzipped/sample diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/git-1.8.1.1/t/t0060-path-utils.sh new/git-1.8.1.2/t/t0060-path-utils.sh --- old/git-1.8.1.1/t/t0060-path-utils.sh 2013-01-14 20:22:04.000000000 +0100 +++ new/git-1.8.1.2/t/t0060-path-utils.sh 2013-01-28 21:01:51.000000000 +0100 @@ -93,47 +93,32 @@ norm_path /d1/.../d2 /d1/.../d2 POSIX norm_path /d1/..././../d2 /d1/d2 POSIX -ancestor / "" -1 ancestor / / -1 -ancestor /foo "" -1 -ancestor /foo : -1 -ancestor /foo ::. -1 -ancestor /foo ::..:: -1 ancestor /foo / 0 ancestor /foo /fo -1 ancestor /foo /foo -1 -ancestor /foo /foo/ -1 ancestor /foo /bar -1 -ancestor /foo /bar/ -1 ancestor /foo /foo/bar -1 -ancestor /foo /foo:/bar/ -1 -ancestor /foo /foo/:/bar/ -1 -ancestor /foo /foo::/bar/ -1 -ancestor /foo /:/foo:/bar/ 0 -ancestor /foo /foo:/:/bar/ 0 -ancestor /foo /:/bar/:/foo 0 -ancestor /foo/bar "" -1 +ancestor /foo /foo:/bar -1 +ancestor /foo /:/foo:/bar 0 +ancestor /foo /foo:/:/bar 0 +ancestor /foo /:/bar:/foo 0 ancestor /foo/bar / 0 ancestor /foo/bar /fo -1 -ancestor /foo/bar foo -1 ancestor /foo/bar /foo 4 -ancestor /foo/bar /foo/ 4 ancestor /foo/bar /foo/ba -1 ancestor /foo/bar /:/fo 0 ancestor /foo/bar /foo:/foo/ba 4 ancestor /foo/bar /bar -1 -ancestor /foo/bar /bar/ -1 -ancestor /foo/bar /fo: -1 -ancestor /foo/bar :/fo -1 -ancestor /foo/bar /foo:/bar/ 4 -ancestor /foo/bar /:/foo:/bar/ 4 -ancestor /foo/bar /foo:/:/bar/ 4 -ancestor /foo/bar /:/bar/:/fo 0 -ancestor /foo/bar /:/bar/ 0 -ancestor /foo/bar .:/foo/. 4 -ancestor /foo/bar .:/foo/.:.: 4 -ancestor /foo/bar /foo/./:.:/bar 4 -ancestor /foo/bar .:/bar -1 +ancestor /foo/bar /fo -1 +ancestor /foo/bar /foo:/bar 4 +ancestor /foo/bar /:/foo:/bar 4 +ancestor /foo/bar /foo:/:/bar 4 +ancestor /foo/bar /:/bar:/fo 0 +ancestor /foo/bar /:/bar 0 +ancestor /foo/bar /foo 4 +ancestor /foo/bar /foo:/bar 4 +ancestor /foo/bar /bar -1 test_expect_success 'strip_path_suffix' ' test c:/msysgit = $(test-path-utils strip_path_suffix \ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/git-1.8.1.1/t/t0063-string-list.sh new/git-1.8.1.2/t/t0063-string-list.sh --- old/git-1.8.1.1/t/t0063-string-list.sh 2013-01-14 20:22:04.000000000 +0100 +++ new/git-1.8.1.2/t/t0063-string-list.sh 2013-01-28 21:01:51.000000000 +0100 @@ -17,14 +17,6 @@ " } -test_longest_prefix () { - test "$(test-string-list longest_prefix "$1" "$2")" = "$3" -} - -test_no_longest_prefix () { - test_must_fail test-string-list longest_prefix "$1" "$2" -} - test_split "foo:bar:baz" ":" "-1" <<EOF 3 [0]: "foo" @@ -96,26 +88,4 @@ test a:b:c = "$(test-string-list remove_duplicates a:a:a:b:b:b:c:c:c)" ' -test_expect_success "test longest_prefix" ' - test_no_longest_prefix - '' && - test_no_longest_prefix - x && - test_longest_prefix "" x "" && - test_longest_prefix x x x && - test_longest_prefix "" foo "" && - test_longest_prefix : foo "" && - test_longest_prefix f foo f && - test_longest_prefix foo foobar foo && - test_longest_prefix foo foo foo && - test_no_longest_prefix bar foo && - test_no_longest_prefix bar:bar foo && - test_no_longest_prefix foobar foo && - test_longest_prefix foo:bar foo foo && - test_longest_prefix foo:bar bar bar && - test_longest_prefix foo::bar foo foo && - test_longest_prefix foo:foobar foo foo && - test_longest_prefix foobar:foo foo foo && - test_longest_prefix foo: bar "" && - test_longest_prefix :foo bar "" -' - test_done diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/git-1.8.1.1/t/t5000-tar-tree.sh new/git-1.8.1.2/t/t5000-tar-tree.sh --- old/git-1.8.1.1/t/t5000-tar-tree.sh 2013-01-14 20:22:04.000000000 +0100 +++ new/git-1.8.1.2/t/t5000-tar-tree.sh 2013-01-28 21:01:51.000000000 +0100 @@ -25,32 +25,11 @@ ' . ./test-lib.sh -UNZIP=${UNZIP:-unzip} GZIP=${GZIP:-gzip} GUNZIP=${GUNZIP:-gzip -d} SUBSTFORMAT=%H%n -check_zip() { - zipfile=$1.zip - listfile=$1.lst - dir=$1 - dir_with_prefix=$dir/$2 - - test_expect_success UNZIP " extract ZIP archive" " - (mkdir $dir && cd $dir && $UNZIP ../$zipfile) - " - - test_expect_success UNZIP " validate filenames" " - (cd ${dir_with_prefix}a && find .) | sort >$listfile && - test_cmp a.lst $listfile - " - - test_expect_success UNZIP " validate file contents" " - diff -r a ${dir_with_prefix}a - " -} - test_expect_success \ 'populate workdir' \ 'mkdir a b c && @@ -201,62 +180,12 @@ test_cmp a/substfile2 g/prefix/a/substfile2 ' -$UNZIP -v >/dev/null 2>&1 -if [ $? -eq 127 ]; then - say "Skipping ZIP tests, because unzip was not found" -else - test_set_prereq UNZIP -fi - -test_expect_success \ - 'git archive --format=zip' \ - 'git archive --format=zip HEAD >d.zip' - -check_zip d - -test_expect_success \ - 'git archive --format=zip in a bare repo' \ - '(cd bare.git && git archive --format=zip HEAD) >d1.zip' - -test_expect_success \ - 'git archive --format=zip vs. the same in a bare repo' \ - 'test_cmp d.zip d1.zip' - -test_expect_success 'git archive --format=zip with --output' \ - 'git archive --format=zip --output=d2.zip HEAD && - test_cmp d.zip d2.zip' - -test_expect_success 'git archive with --output, inferring format' ' - git archive --output=d3.zip HEAD && - test_cmp d.zip d3.zip -' - test_expect_success 'git archive with --output, override inferred format' ' git archive --format=tar --output=d4.zip HEAD && test_cmp b.tar d4.zip ' test_expect_success \ - 'git archive --format=zip with prefix' \ - 'git archive --format=zip --prefix=prefix/ HEAD >e.zip' - -check_zip e prefix/ - -test_expect_success 'git archive -0 --format=zip on large files' ' - test_config core.bigfilethreshold 1 && - git archive -0 --format=zip HEAD >large.zip -' - -check_zip large - -test_expect_success 'git archive --format=zip on large files' ' - test_config core.bigfilethreshold 1 && - git archive --format=zip HEAD >large-compressed.zip -' - -check_zip large-compressed - -test_expect_success \ 'git archive --list outside of a git repo' \ 'GIT_DIR=some/non-existing/directory git archive --list' Files old/git-1.8.1.1/t/t5003/infozip-symlinks.zip and new/git-1.8.1.2/t/t5003/infozip-symlinks.zip differ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/git-1.8.1.1/t/t5003-archive-zip.sh new/git-1.8.1.2/t/t5003-archive-zip.sh --- old/git-1.8.1.1/t/t5003-archive-zip.sh 1970-01-01 01:00:00.000000000 +0100 +++ new/git-1.8.1.2/t/t5003-archive-zip.sh 2013-01-28 21:01:51.000000000 +0100 @@ -0,0 +1,131 @@ +#!/bin/sh + +test_description='git archive --format=zip test' + +. ./test-lib.sh +GIT_UNZIP=${GIT_UNZIP:-unzip} + +SUBSTFORMAT=%H%n + +test_lazy_prereq UNZIP ' + "$GIT_UNZIP" -v + test $? -ne 127 +' + +test_lazy_prereq UNZIP_SYMLINKS ' + ( + mkdir unzip-symlinks && + cd unzip-symlinks && + "$GIT_UNZIP" "$TEST_DIRECTORY"/t5003/infozip-symlinks.zip && + test -h symlink + ) +' + +check_zip() { + zipfile=$1.zip + listfile=$1.lst + dir=$1 + dir_with_prefix=$dir/$2 + + test_expect_success UNZIP " extract ZIP archive" ' + (mkdir $dir && cd $dir && "$GIT_UNZIP" ../$zipfile) + ' + + test_expect_success UNZIP " validate filenames" " + (cd ${dir_with_prefix}a && find .) | sort >$listfile && + test_cmp a.lst $listfile + " + + test_expect_success UNZIP " validate file contents" " + diff -r a ${dir_with_prefix}a + " +} + +test_expect_success \ + 'populate workdir' \ + 'mkdir a b c && + echo simple textfile >a/a && + mkdir a/bin && + cp /bin/sh a/bin && + printf "A\$Format:%s\$O" "$SUBSTFORMAT" >a/substfile1 && + printf "A not substituted O" >a/substfile2 && + (p=long_path_to_a_file && cd a && + for depth in 1 2 3 4 5; do mkdir $p && cd $p; done && + echo text >file_with_long_path) +' + +test_expect_success SYMLINKS,UNZIP_SYMLINKS 'add symlink' ' + ln -s a a/symlink_to_a +' + +test_expect_success 'prepare file list' ' + (cd a && find .) | sort >a.lst +' + +test_expect_success \ + 'add ignored file' \ + 'echo ignore me >a/ignored && + echo ignored export-ignore >.git/info/attributes' + +test_expect_success \ + 'add files to repository' \ + 'find a -type f | xargs git update-index --add && + find a -type l | xargs git update-index --add && + treeid=`git write-tree` && + echo $treeid >treeid && + git update-ref HEAD $(TZ=GMT GIT_COMMITTER_DATE="2005-05-27 22:00:00" \ + git commit-tree $treeid </dev/null)' + +test_expect_success \ + 'create bare clone' \ + 'git clone --bare . bare.git && + cp .git/info/attributes bare.git/info/attributes' + +test_expect_success \ + 'remove ignored file' \ + 'rm a/ignored' + +test_expect_success \ + 'git archive --format=zip' \ + 'git archive --format=zip HEAD >d.zip' + +check_zip d + +test_expect_success \ + 'git archive --format=zip in a bare repo' \ + '(cd bare.git && git archive --format=zip HEAD) >d1.zip' + +test_expect_success \ + 'git archive --format=zip vs. the same in a bare repo' \ + 'test_cmp d.zip d1.zip' + +test_expect_success 'git archive --format=zip with --output' \ + 'git archive --format=zip --output=d2.zip HEAD && + test_cmp d.zip d2.zip' + +test_expect_success 'git archive with --output, inferring format' ' + git archive --output=d3.zip HEAD && + test_cmp d.zip d3.zip +' + +test_expect_success \ + 'git archive --format=zip with prefix' \ + 'git archive --format=zip --prefix=prefix/ HEAD >e.zip' + +check_zip e prefix/ + +test_expect_success 'git archive -0 --format=zip on large files' ' + test_config core.bigfilethreshold 1 && + git archive -0 --format=zip HEAD >large.zip +' + +check_zip large + +test_expect_success 'git archive --format=zip on large files' ' + test_config core.bigfilethreshold 1 && + git archive --format=zip HEAD >large-compressed.zip +' + +check_zip large-compressed + +test_done diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/git-1.8.1.1/t/t7061-wtstatus-ignore.sh new/git-1.8.1.2/t/t7061-wtstatus-ignore.sh --- old/git-1.8.1.1/t/t7061-wtstatus-ignore.sh 1970-01-01 01:00:00.000000000 +0100 +++ new/git-1.8.1.2/t/t7061-wtstatus-ignore.sh 2013-01-28 21:01:51.000000000 +0100 @@ -0,0 +1,146 @@ +#!/bin/sh + +test_description='git-status ignored files' + +. ./test-lib.sh + +cat >expected <<\EOF +?? .gitignore +?? actual +?? expected +?? untracked/ +EOF + +test_expect_success 'status untracked directory with --ignored' ' + echo "ignored" >.gitignore && + mkdir untracked && + : >untracked/ignored && + : >untracked/uncommitted && + git status --porcelain --ignored >actual && + test_cmp expected actual +' + +cat >expected <<\EOF +?? .gitignore +?? actual +?? expected +?? untracked/uncommitted +!! untracked/ignored +EOF + +test_expect_success 'status untracked directory with --ignored -u' ' + git status --porcelain --ignored -u >actual && + test_cmp expected actual +' + +cat >expected <<\EOF +?? .gitignore +?? actual +?? expected +!! ignored/ +EOF + +test_expect_success 'status ignored directory with --ignore' ' + rm -rf untracked && + mkdir ignored && + : >ignored/uncommitted && + git status --porcelain --ignored >actual && + test_cmp expected actual +' + +cat >expected <<\EOF +?? .gitignore +?? actual +?? expected +!! ignored/uncommitted +EOF + +test_expect_success 'status ignored directory with --ignore -u' ' + git status --porcelain --ignored -u >actual && + test_cmp expected actual +' + +cat >expected <<\EOF +?? .gitignore +?? actual +?? expected +!! untracked-ignored/ +EOF + +test_expect_success 'status untracked directory with ignored files with --ignore' ' + rm -rf ignored && + mkdir untracked-ignored && + mkdir untracked-ignored/test && + : >untracked-ignored/ignored && + : >untracked-ignored/test/ignored && + git status --porcelain --ignored >actual && + test_cmp expected actual +' + +cat >expected <<\EOF +?? .gitignore +?? actual +?? expected +!! untracked-ignored/ignored +!! untracked-ignored/test/ignored +EOF + +test_expect_success 'status untracked directory with ignored files with --ignore -u' ' + git status --porcelain --ignored -u >actual && + test_cmp expected actual +' + +cat >expected <<\EOF +?? .gitignore +?? actual +?? expected +EOF + +test_expect_success 'status ignored tracked directory with --ignore' ' + rm -rf untracked-ignored && + mkdir tracked && + : >tracked/committed && + git add tracked/committed && + git commit -m. && + echo "tracked" >.gitignore && + git status --porcelain --ignored >actual && + test_cmp expected actual +' + +cat >expected <<\EOF +?? .gitignore +?? actual +?? expected +EOF + +test_expect_success 'status ignored tracked directory with --ignore -u' ' + git status --porcelain --ignored -u >actual && + test_cmp expected actual +' + +cat >expected <<\EOF +?? .gitignore +?? actual +?? expected +!! tracked/ +EOF + +test_expect_success 'status ignored tracked directory and uncommitted file with --ignore' ' + : >tracked/uncommitted && + git status --porcelain --ignored >actual && + test_cmp expected actual +' + +cat >expected <<\EOF +?? .gitignore +?? actual +?? expected +!! tracked/uncommitted +EOF + +test_expect_success 'status ignored tracked directory and uncommitted file with --ignore -u' ' + git status --porcelain --ignored -u >actual && + test_cmp expected actual +' + +test_done diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/git-1.8.1.1/t/test-lib.sh new/git-1.8.1.2/t/test-lib.sh --- old/git-1.8.1.1/t/test-lib.sh 2013-01-14 20:22:04.000000000 +0100 +++ new/git-1.8.1.2/t/test-lib.sh 2013-01-28 21:01:51.000000000 +0100 @@ -85,6 +85,7 @@ .*_TEST PROVE VALGRIND + UNZIP PERF_AGGREGATING_LATER )); my @vars = grep(/^GIT_/ && !/^GIT_($ok)/o, @env); @@ -128,6 +129,7 @@ unset CDPATH unset GREP_OPTIONS +unset UNZIP case $(echo $GIT_TRACE |tr "[A-Z]" "[a-z]") in 1|2|true) diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/git-1.8.1.1/test-path-utils.c new/git-1.8.1.2/test-path-utils.c --- old/git-1.8.1.1/test-path-utils.c 2013-01-14 20:22:04.000000000 +0100 +++ new/git-1.8.1.2/test-path-utils.c 2013-01-28 21:01:51.000000000 +0100 @@ -1,4 +1,32 @@ #include "cache.h" +#include "string-list.h" + +/* + * A "string_list_each_func_t" function that normalizes an entry from + * GIT_CEILING_DIRECTORIES. If the path is unusable for some reason, + * die with an explanation. + */ +static int normalize_ceiling_entry(struct string_list_item *item, void *unused) +{ + const char *ceil = item->string; + int len = strlen(ceil); + char buf[PATH_MAX+1]; + + if (len == 0) + die("Empty path is not supported"); + if (len > PATH_MAX) + die("Path \"%s\" is too long", ceil); + if (!is_absolute_path(ceil)) + die("Path \"%s\" is not absolute", ceil); + if (normalize_path_copy(buf, ceil) < 0) + die("Path \"%s\" could not be normalized", ceil); + len = strlen(buf); + if (len > 1 && buf[len-1] == '/') + die("Normalized path \"%s\" ended with slash", buf); + free(item->string); + item->string = xstrdup(buf); + return 1; +} int main(int argc, char **argv) { @@ -30,7 +58,28 @@ } if (argc == 4 && !strcmp(argv[1], "longest_ancestor_length")) { - int len = longest_ancestor_length(argv[2], argv[3]); + int len; + struct string_list ceiling_dirs = STRING_LIST_INIT_DUP; + char *path = xstrdup(argv[2]); + + /* + * We have to normalize the arguments because under + * Windows, bash mangles arguments that look like + * absolute POSIX paths or colon-separate lists of + * absolute POSIX paths into DOS paths (e.g., + * "/foo:/foo/bar" might be converted to + * "D:\Src\msysgit\foo;D:\Src\msysgit\foo\bar"), + * whereas longest_ancestor_length() requires paths + * that use forward slashes. + */ + if (normalize_path_copy(path, path)) + die("Path \"%s\" could not be normalized", argv[2]); + string_list_split(&ceiling_dirs, argv[3], PATH_SEP, -1); + filter_string_list(&ceiling_dirs, 0, + normalize_ceiling_entry, NULL); + len = longest_ancestor_length(path, &ceiling_dirs); + string_list_clear(&ceiling_dirs, 0); + free(path); printf("%d\n", len); return 0; } diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/git-1.8.1.1/test-string-list.c new/git-1.8.1.2/test-string-list.c --- old/git-1.8.1.1/test-string-list.c 2013-01-14 20:22:04.000000000 +0100 +++ new/git-1.8.1.2/test-string-list.c 2013-01-28 21:01:51.000000000 +0100 @@ -97,26 +97,6 @@ return 0; } - if (argc == 4 && !strcmp(argv[1], "longest_prefix")) { - /* arguments: <colon-separated-prefixes>|- <string> */ - struct string_list prefixes = STRING_LIST_INIT_DUP; - int retval; - const char *prefix_string = argv[2]; - const char *string = argv[3]; - const char *match; - - parse_string_list(&prefixes, prefix_string); - match = string_list_longest_prefix(&prefixes, string); - if (match) { - printf("%s\n", match); - retval = 0; - } - else - retval = 1; - string_list_clear(&prefixes, 0); - return retval; - } - fprintf(stderr, "%s: unknown function name: %s\n", argv[0], argv[1] ? argv[1] : "(there was none)"); return 1; diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/git-1.8.1.1/version new/git-1.8.1.2/version --- old/git-1.8.1.1/version 2013-01-14 20:22:04.000000000 +0100 +++ new/git-1.8.1.2/version 2013-01-28 21:01:52.000000000 +0100 @@ -1 +1 @@ -1.8.1.1 +1.8.1.2 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/git-1.8.1.1/wt-status.c new/git-1.8.1.2/wt-status.c --- old/git-1.8.1.1/wt-status.c 2013-01-14 20:22:04.000000000 +0100 +++ new/git-1.8.1.2/wt-status.c 2013-01-28 21:01:51.000000000 +0100 @@ -516,7 +516,9 @@ if (s->show_ignored_files) { dir.nr = 0; - dir.flags = DIR_SHOW_IGNORED | DIR_SHOW_OTHER_DIRECTORIES; + dir.flags = DIR_SHOW_IGNORED; + if (s->show_untracked_files != SHOW_ALL_UNTRACKED_FILES) + dir.flags |= DIR_SHOW_OTHER_DIRECTORIES; fill_directory(&dir, s->pathspec); for (i = 0; i < dir.nr; i++) { struct dir_entry *ent = dir.entries[i]; -- To unsubscribe, e-mail: opensuse-commit+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-commit+help@opensuse.org