Hello community, here is the log from the commit of package xorg-x11-proto-devel for openSUSE:Factory checked in at 2014-04-01 06:46:28 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/xorg-x11-proto-devel (Old) and /work/SRC/openSUSE:Factory/.xorg-x11-proto-devel.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "xorg-x11-proto-devel" Changes: -------- --- /work/SRC/openSUSE:Factory/xorg-x11-proto-devel/xorg-x11-proto-devel.changes 2014-03-22 19:46:04.000000000 +0100 +++ /work/SRC/openSUSE:Factory/.xorg-x11-proto-devel.new/xorg-x11-proto-devel.changes 2014-04-01 06:46:31.000000000 +0200 @@ -1,0 +2,5 @@ +Sat Mar 29 01:16:53 UTC 2014 - tobias.johannes.klausmann@mni.thm.de + +- Update util-macros to version 1.19.0 + +------------------------------------------------------------------- Old: ---- util-macros-1.18.0.tar.bz2 New: ---- util-macros-1.19.0.tar.bz2 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ xorg-x11-proto-devel.spec ++++++ --- /var/tmp/diff_new_pack.X1BudK/_old 2014-04-01 06:46:33.000000000 +0200 +++ /var/tmp/diff_new_pack.X1BudK/_new 2014-04-01 06:46:33.000000000 +0200 @@ -57,7 +57,7 @@ Source15: http://xorg.freedesktop.org/releases/individual/proto/resourceproto-1.2.0.ta... Source16: http://xorg.freedesktop.org/releases/individual/proto/scrnsaverproto-1.2.2.t... Source17: http://xorg.freedesktop.org/releases/individual/proto/trapproto-3.4.3.tar.bz... -Source18: http://xorg.freedesktop.org/releases/individual/util/util-macros-1.18.0.tar.... +Source18: http://xorg.freedesktop.org/releases/individual/util/util-macros-1.19.0.tar.... Source19: http://xorg.freedesktop.org/releases/individual/proto/videoproto-2.3.1.tar.b... Source20: http://xorg.freedesktop.org/releases/individual/proto/windowswmproto-1.0.4.t... Source21: http://xorg.freedesktop.org/releases/individual/proto/xcmiscproto-1.2.2.tar.... ++++++ util-macros-1.18.0.tar.bz2 -> util-macros-1.19.0.tar.bz2 ++++++ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/util-macros-1.18.0/ChangeLog new/util-macros-1.19.0/ChangeLog --- old/util-macros-1.18.0/ChangeLog 2013-12-03 16:20:46.000000000 +0100 +++ new/util-macros-1.19.0/ChangeLog 2014-03-27 14:22:08.000000000 +0100 @@ -1,3 +1,88 @@ +commit 9a54b858601bd305de2737b06e609084a2a114c2 +Author: Gaetan Nadon <memsize@videotron.ca> +Date: Thu Mar 27 09:10:01 2014 -0400 + + Version bump: 1.19.0 + + Signed-off-by: Gaetan Nadon <memsize@videotron.ca> + +commit 0677da7ed48f74a54f9bfd12afea7f0d578d7d38 +Author: Hans de Goede <hdegoede@redhat.com> +Date: Thu Mar 27 12:45:43 2014 +0100 + + XORG_PROG_RAWCPP: Add TRADITIONALCPPFLAGS + + In some cases we may want to have -traditional for proper whitespace preserving + without -undef, as we actually want the system definitions to be in place + so we can #ifdef on them. IE in xinit various .cpp files contain things like + #ifdef __APPLE__ and #ifdef __linux__ + + So this patch adds a TRADITIONALCPPFLAGS variable which contains just + -traditional where applicable without the other RAWCPPFLAGS for unsetting + the system definitions. + + Signed-off-by: Hans de Goede <hdegoede@redhat.com> + Reviewed-by: Gaetan Nadon <memsize@videotron.ca> + +commit 6768f12b4db660bb691337c6d238a32aae0475ff +Author: Gaetan Nadon <memsize@videotron.ca> +Date: Thu Mar 27 08:21:51 2014 -0400 + + Provide the automake INSTALL file at level 1.11 + + Now that the minimum level for automake is 1.11, replace the current + INSTALL with the one from automake 1.11. + + Recall that the file in this package is installed in $pkgdatadir + and is copied by each xorg module through the make 'dist' target. + + Signed-off-by: Gaetan Nadon <memsize@videotron.ca> + +commit 7acde944f40dad08fa8c43bc2548205e343afcd1 +Author: Arnaud Fontaine <arnau@debian.org> +Date: Sat Feb 8 10:31:39 2014 -0500 + + Add XORG_WITH_M4 macro + + Originally from XCB, this macro checks for the presence of m4 or gm4 + which supports -I dir. + + The AC_PATH_PROGS_FEATURE_CHECK autoconf macro requires autoconf 2.62. + + Signed-off-by: Gaetan Nadon <memsize@videotron.ca> + +commit a5092b6a9931c8a60813f4f8a038cc5d9771d212 +Author: Gaetan Nadon <memsize@videotron.ca> +Date: Thu Feb 6 17:47:20 2014 -0500 + + Bump minimum Autoconf required version to 2.62 + + The main motivation is to catch-up with the development reality and + allow use of features in Autoconf 2.62 as well as Automake 1.11. + + As usual this means no features found only in versions above those + specified are allowed. + + This is implementing the policy change which is described in: + http://www.x.org/wiki/Building_the_X_Window_System/?updated#index2h3 + + Discussion on xorg minimum autotools requirements: + http://lists.x.org/archives/xorg-devel/2013-October/038325.html + + Signed-off-by: Gaetan Nadon <memsize@videotron.ca> + +commit 72b211419977a211c871232d66e1a668e3cf702f +Author: Alan Coopersmith <alan.coopersmith@oracle.com> +Date: Mon Dec 2 16:41:45 2013 -0800 + + XORG_COMPILER_FLAGS: Add -Wlogical-op to default warning set + + We've fixed several bugs it uncovered already, only one warning left that + it adds in a default build. + + Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com> + Reviewed-by: Gaetan Nadon <memsize@videotron.ca> + commit 9bc8e154e53ee0ff8d09cc621ba762486f3e93fa Author: Gaetan Nadon <memsize@videotron.ca> Date: Mon Dec 2 18:43:36 2013 -0500 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/util-macros-1.18.0/INSTALL new/util-macros-1.19.0/INSTALL --- old/util-macros-1.18.0/INSTALL 2009-11-07 15:34:49.000000000 +0100 +++ new/util-macros-1.19.0/INSTALL 2012-04-02 19:37:09.000000000 +0200 @@ -1,11 +1,13 @@ Installation Instructions ************************* -Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005, -2006, 2007, 2008 Free Software Foundation, Inc. +Copyright (C) 1994-1996, 1999-2002, 2004-2011 Free Software Foundation, +Inc. - This file is free documentation; the Free Software Foundation gives -unlimited permission to copy, distribute and modify it. + Copying and distribution of this file, with or without modification, +are permitted in any medium without royalty provided the copyright +notice and this notice are preserved. This file is offered as-is, +without warranty of any kind. Basic Installation ================== @@ -13,7 +15,11 @@ Briefly, the shell commands `./configure; make; make install' should configure, build, and install this package. The following more-detailed instructions are generic; see the `README' file for -instructions specific to this package. +instructions specific to this package. Some packages provide this +`INSTALL' file but do not implement all of the features documented +below. The lack of an optional feature in a given package is not +necessarily a bug. More recommendations for GNU packages can be found +in *note Makefile Conventions: (standards)Makefile Conventions. The `configure' shell script attempts to guess correct values for various system-dependent variables used during compilation. It uses @@ -42,7 +48,7 @@ you want to change it or regenerate `configure' using a newer version of `autoconf'. -The simplest way to compile this package is: + The simplest way to compile this package is: 1. `cd' to the directory containing the package's source code and type `./configure' to configure the package for your system. @@ -53,12 +59,22 @@ 2. Type `make' to compile the package. 3. Optionally, type `make check' to run any self-tests that come with - the package. + the package, generally using the just-built uninstalled binaries. 4. Type `make install' to install the programs and any data files and - documentation. + documentation. When installing into a prefix owned by root, it is + recommended that the package be configured and built as a regular + user, and only the `make install' phase executed with root + privileges. + + 5. Optionally, type `make installcheck' to repeat any self-tests, but + this time using the binaries in their final installed location. + This target does not install anything. Running this target as a + regular user, particularly if the prior `make install' required + root privileges, verifies that the installation completed + correctly. - 5. You can remove the program binaries and object files from the + 6. You can remove the program binaries and object files from the source code directory by typing `make clean'. To also remove the files that `configure' created (so you can compile the package for a different kind of computer), type `make distclean'. There is @@ -67,8 +83,15 @@ all sorts of other programs in order to regenerate files that came with the distribution. - 6. Often, you can also type `make uninstall' to remove the installed - files again. + 7. Often, you can also type `make uninstall' to remove the installed + files again. In practice, not all packages have tested that + uninstallation works correctly, even though it is required by the + GNU Coding Standards. + + 8. Some packages, particularly those that use Automake, provide `make + distcheck', which can by used by developers to test that all other + targets like `make install' and `make uninstall' work correctly. + This target is generally not run by end users. Compilers and Options ===================== @@ -93,7 +116,8 @@ own directory. To do this, you can use GNU `make'. `cd' to the directory where you want the object files and executables to go and run the `configure' script. `configure' automatically checks for the -source code in the directory that `configure' is in and in `..'. +source code in the directory that `configure' is in and in `..'. This +is known as a "VPATH" build. With a non-GNU `make', it is safer to compile the package for one architecture at a time in the source code directory. After you have @@ -120,7 +144,8 @@ By default, `make install' installs the package's commands under `/usr/local/bin', include files under `/usr/local/include', etc. You can specify an installation prefix other than `/usr/local' by giving -`configure' the option `--prefix=PREFIX'. +`configure' the option `--prefix=PREFIX', where PREFIX must be an +absolute file name. You can specify separate installation prefixes for architecture-specific files and architecture-independent files. If you @@ -131,15 +156,46 @@ In addition, if you use an unusual directory layout you can give options like `--bindir=DIR' to specify different values for particular kinds of files. Run `configure --help' for a list of the directories -you can set and what kinds of files go in them. +you can set and what kinds of files go in them. In general, the +default for these options is expressed in terms of `${prefix}', so that +specifying just `--prefix' will affect all of the other directory +specifications that were not explicitly provided. + + The most portable way to affect installation locations is to pass the +correct locations to `configure'; however, many packages provide one or +both of the following shortcuts of passing variable assignments to the +`make install' command line to change installation locations without +having to reconfigure or recompile. + + The first method involves providing an override variable for each +affected directory. For example, `make install +prefix=/alternate/directory' will choose an alternate location for all +directory configuration variables that were expressed in terms of +`${prefix}'. Any directories that were specified during `configure', +but not in terms of `${prefix}', must each be overridden at install +time for the entire installation to be relocated. The approach of +makefile variable overrides for each directory variable is required by +the GNU Coding Standards, and ideally causes no recompilation. +However, some platforms have known limitations with the semantics of +shared libraries that end up requiring recompilation when using this +method, particularly noticeable in packages that use GNU Libtool. + + The second method involves providing the `DESTDIR' variable. For +example, `make install DESTDIR=/alternate/directory' will prepend +`/alternate/directory' before all installation names. The approach of +`DESTDIR' overrides is not required by the GNU Coding Standards, and +does not work on platforms that have drive letters. On the other hand, +it does better at avoiding recompilation issues, and works well even +when some directory options were not specified in terms of `${prefix}' +at `configure' time. + +Optional Features +================= If the package supports it, you can cause programs to be installed with an extra prefix or suffix on their names by giving `configure' the option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. -Optional Features -================= - Some packages pay attention to `--enable-FEATURE' options to `configure', where FEATURE indicates an optional part of the package. They may also pay attention to `--with-PACKAGE' options, where PACKAGE @@ -152,6 +208,13 @@ you can use the `configure' options `--x-includes=DIR' and `--x-libraries=DIR' to specify their locations. + Some packages offer the ability to configure how verbose the +execution of `make' will be. For these packages, running `./configure +--enable-silent-rules' sets the default to minimal output, which can be +overridden with `make V=1'; while running `./configure +--disable-silent-rules' sets the default to verbose, which can be +overridden with `make V=0'. + Particular systems ================== @@ -159,10 +222,15 @@ CC is not installed, it is recommended to use the following options in order to use an ANSI C compiler: - ./configure CC="cc -Ae" + ./configure CC="cc -Ae -D_XOPEN_SOURCE=500" and if that doesn't work, install pre-built binaries of GCC for HP-UX. + HP-UX `make' updates targets which have the same time stamps as +their prerequisites, which makes it generally unusable when shipped +generated files such as `configure' are involved. Use GNU `make' +instead. + On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot parse its `<wchar.h>' header file. The option `-nodtk' can be used as a workaround. If GNU CC is not installed, it is therefore recommended @@ -174,6 +242,16 @@ ./configure CC="cc -nodtk" + On Solaris, don't put `/usr/ucb' early in your `PATH'. This +directory contains several dysfunctional programs; working variants of +these programs are available in `/usr/bin'. So, if you need `/usr/ucb' +in your `PATH', put it _after_ `/usr/bin'. + + On Haiku, software installed for all users goes in `/boot/common', +not `/usr/local'. It is recommended to use the following options: + + ./configure --prefix=/boot/common + Specifying the System Type ========================== @@ -189,7 +267,8 @@ where SYSTEM can have one of these forms: - OS KERNEL-OS + OS + KERNEL-OS See the file `config.sub' for the possible values of each field. If `config.sub' isn't included in this package, then this package doesn't @@ -277,7 +356,7 @@ `configure' can determine that directory automatically. `--prefix=DIR' - Use DIR as the installation prefix. *Note Installation Names:: + Use DIR as the installation prefix. *note Installation Names:: for more details, including other options available for fine-tuning the installation locations. diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/util-macros-1.18.0/configure new/util-macros-1.19.0/configure --- old/util-macros-1.18.0/configure 2013-12-03 15:52:35.000000000 +0100 +++ new/util-macros-1.19.0/configure 2014-03-27 14:11:05.000000000 +0100 @@ -1,6 +1,6 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.68 for util-macros 1.18.0. +# Generated by GNU Autoconf 2.68 for util-macros 1.19.0. # # Report bugs to <https://bugs.freedesktop.org/enter_bug.cgi?product=xorg>. # @@ -560,8 +560,8 @@ # Identity of this package. PACKAGE_NAME='util-macros' PACKAGE_TARNAME='util-macros' -PACKAGE_VERSION='1.18.0' -PACKAGE_STRING='util-macros 1.18.0' +PACKAGE_VERSION='1.19.0' +PACKAGE_STRING='util-macros 1.19.0' PACKAGE_BUGREPORT='https://bugs.freedesktop.org/enter_bug.cgi?product=xorg' PACKAGE_URL='' @@ -1179,7 +1179,7 @@ # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF -\`configure' configures util-macros 1.18.0 to adapt to many kinds of systems. +\`configure' configures util-macros 1.19.0 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... @@ -1245,7 +1245,7 @@ if test -n "$ac_init_help"; then case $ac_init_help in - short | recursive ) echo "Configuration of util-macros 1.18.0:";; + short | recursive ) echo "Configuration of util-macros 1.19.0:";; esac cat <<\_ACEOF @@ -1312,7 +1312,7 @@ test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF -util-macros configure 1.18.0 +util-macros configure 1.19.0 generated by GNU Autoconf 2.68 Copyright (C) 2010 Free Software Foundation, Inc. @@ -1329,7 +1329,7 @@ This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. -It was created by util-macros $as_me 1.18.0, which was +It was created by util-macros $as_me 1.19.0, which was generated by GNU Autoconf 2.68. Invocation command line was $ $0 $@ @@ -2145,7 +2145,7 @@ # Define the identity of the package. PACKAGE='util-macros' - VERSION='1.18.0' + VERSION='1.19.0' cat >>confdefs.h <<_ACEOF @@ -2799,7 +2799,7 @@ # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. ac_log=" -This file was extended by util-macros $as_me 1.18.0, which was +This file was extended by util-macros $as_me 1.19.0, which was generated by GNU Autoconf 2.68. Invocation command line was CONFIG_FILES = $CONFIG_FILES @@ -2852,7 +2852,7 @@ cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" ac_cs_version="\\ -util-macros config.status 1.18.0 +util-macros config.status 1.19.0 configured by $0, generated by GNU Autoconf 2.68, with options \\"\$ac_cs_config\\" diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/util-macros-1.18.0/configure.ac new/util-macros-1.19.0/configure.ac --- old/util-macros-1.18.0/configure.ac 2013-12-03 15:42:47.000000000 +0100 +++ new/util-macros-1.19.0/configure.ac 2014-03-27 14:09:06.000000000 +0100 @@ -21,9 +21,9 @@ dnl dnl Process this file with autoconf to create configure. -AC_PREREQ([2.60]) +AC_PREREQ([2.62]) AC_INIT([util-macros], - [1.18.0], + [1.19.0], [https://bugs.freedesktop.org/enter_bug.cgi?product=xorg], [util-macros]) AC_CONFIG_SRCDIR([Makefile.am]) diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/util-macros-1.18.0/xorg-macros.m4.in new/util-macros-1.19.0/xorg-macros.m4.in --- old/util-macros-1.18.0/xorg-macros.m4.in 2013-12-03 00:10:29.000000000 +0100 +++ new/util-macros-1.19.0/xorg-macros.m4.in 2014-03-27 13:56:56.000000000 +0100 @@ -87,6 +87,7 @@ AC_MSG_RESULT([no]) else if test `${RAWCPP} -traditional < conftest.$ac_ext | grep -c 'preserve \"'` -eq 1 ; then + TRADITIONALCPPFLAGS="-traditional" RAWCPPFLAGS="${RAWCPPFLAGS} -traditional" AC_MSG_RESULT([yes]) else @@ -95,6 +96,7 @@ fi rm -f conftest.$ac_ext AC_SUBST(RAWCPPFLAGS) +AC_SUBST(TRADITIONALCPPFLAGS) ]) # XORG_PROG_RAWCPP # XORG_MANPAGE_SECTIONS() @@ -882,6 +884,29 @@ AM_CONDITIONAL([HAVE_FOP], [test "$have_fop" = yes]) ]) # XORG_WITH_FOP +# XORG_WITH_M4([MIN-VERSION]) +# --------------------------- +# Minimum version: 1.19.0 +# +# This macro attempts to locate an m4 macro processor which supports +# -I option and is only useful for modules relying on M4 in order to +# expand macros in source code files. +# +# Interface to module: +# M4: returns the path of the m4 program found +# returns the path set by the user in the environment +# +AC_DEFUN([XORG_WITH_M4], [ +AC_CACHE_CHECK([for m4 that supports -I option], [ac_cv_path_M4], + [AC_PATH_PROGS_FEATURE_CHECK([M4], [m4 gm4], + [[$ac_path_M4 -I. /dev/null > /dev/null 2>&1 && \ + ac_cv_path_M4=$ac_path_M4 ac_path_M4_found=:]], + [AC_MSG_ERROR([could not find m4 that supports -I option])], + [$PATH:/usr/gnu/bin])]) + +AC_SUBST([M4], [$ac_cv_path_M4]) +]) # XORG_WITH_M4 + # XORG_WITH_PS2PDF([DEFAULT]) # ---------------- # Minimum version: 1.6.0 @@ -1650,11 +1675,11 @@ XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Wmissing-noreturn]) XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Wmissing-format-attribute]) XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Wredundant-decls]) +XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Wlogical-op]) # These are currently disabled because they are noisy. They will be enabled # in the future once the codebase is sufficiently modernized to silence # them. For now, I don't want them to drown out the other warnings. -# XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Wlogical-op]) # XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Wparentheses]) # XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Wcast-align]) # XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Wcast-qual]) -- To unsubscribe, e-mail: opensuse-commit+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-commit+help@opensuse.org