Hello community, here is the log from the commit of package python-pycurl for openSUSE:Factory checked in at 2014-05-27 18:23:37 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/python-pycurl (Old) and /work/SRC/openSUSE:Factory/.python-pycurl.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "python-pycurl" Changes: -------- --- /work/SRC/openSUSE:Factory/python-pycurl/python-pycurl.changes 2013-09-03 22:03:55.000000000 +0200 +++ /work/SRC/openSUSE:Factory/.python-pycurl.new/python-pycurl.changes 2014-05-27 18:23:47.000000000 +0200 @@ -1,0 +2,137 @@ +Mon May 26 14:17:15 UTC 2014 - toddrme2178@gmail.com + +- Removed part of patch that breaks now necessary things: + pycurl-no-runtime-curlvercheck.patch +- Specify ssl type since it is not automatically detected. + +------------------------------------------------------------------- +Wed May 21 15:41:00 UTC 2014 - toddrme2178@gmail.com + +- Removed patch specific to python3-pycurl: pycurl-python3.patch +- Rebase patch: pycurl-no-runtime-curlvercheck.patch + +------------------------------------------------------------------- +Tue May 20 12:13:23 UTC 2014 - toddrme2178@gmail.com + +- Update to version 7.19.3.1 + * Added --avoid-stdio setup.py option to avoid passing FILE + pointers from Python to libcurl. Applies to Python 2 only. + * Added CURLMOPT_CHUNK_LENGTH_PENALTY_SIZE, + CURLMOPT_CONTENT_LENGTH_PENALTY_SIZE, CURLMOPT_MAX_HOST_CONNECTIONS + CURLMOPT_MAX_PIPELINE_LENGTH, CURLMOPT_MAX_TOTAL_CONNECTIONS + multi options (patch by Jakob Truelsen). + * SSL detection logic changed to consult `curl-config --static-libs` + even if `curl-config --libs` succeeded. This should achieve + pre-7.19.3 behavior with respect to automatic SSL detection + (patch by Andjelko Horvat). +- Update to version 7.19.3 + * Added CURLOPT_NOPROXY. + * Added CURLINFO_LOCAL_PORT, CURLINFO_PRIMARY_PORT and + CURLINFO_LOCAL_IP (patch by Adam Jacob Muller). + * When running on Python 2.x, for compatibility with Python 3.x, + Unicode strings containing ASCII code points only are now accepted + in setopt() calls. + * PycURL now requires that compile time SSL backend used by libcurl + is the same as the one used at runtime. setup.py supports + --with-ssl, --with-gnutls and --with-nss options like libcurl does, + to specify which backend libcurl uses. On some systems PycURL can + automatically figure out libcurl's backend. + If the backend is not one for which PycURL provides crypto locks + (i.e., any of the other backends supported by libcurl), + no runtime SSL backend check is performed. + * Default PycURL user agent string is now built at runtime, and will + include the user agent string of libcurl loaded at runtime rather + than the one present at compile time. + * PycURL will now use WSAduplicateSocket rather than dup on Windows + to duplicate sockets obtained from OPENSOCKETFUNCTION. + Using dup may have caused crashes, OPENSOCKETFUNCTION should + now be usable on Windows. + * A new script, winbuild.py, was added to build PycURL on Windows + against Python 2.6, 2.7, 3.2 and 3.3. + * Added CURL_LOCK_DATA_SSL_SESSION (patch by Tom Pierce). + * Added E_OPERATION_TIMEDOUT (patch by Romuald Brunet). + * setup.py now handles --help argument and will print PycURL-specific + configuration options in addition to distutils help. + * Windows build configuration has been redone: + PYCURL_USE_LIBCURL_DLL #define is gone, use --use-libcurl-dll + argument to setup.py to build against a libcurl DLL. + CURL_STATICLIB is now #defined only when --use-libcurl-dll is not + given to setup.py, and PycURL is built against libcurl statically. + --libcurl-lib-name option can be used to override libcurl import + library name. + * Added CURLAUTH_DIGEST_IE as pycurl.HTTPAUTH_DIGEST_IE. + * Added CURLOPT_POSTREDIR option and CURL_REDIR_POST_301, + CURL_REDIR_POST_302, CURL_REDIR_POST_303 and CURL_REDIR_POST_ALL + constants. CURL_REDIR_POST_303 requires libcurl 7.26.0 or higher, + all others require libcurl 7.19.1 or higher. + * PycURL now supports Python 3.1 through 3.3. Python 3.0 might + work but it appears to ship with broken distutils, making virtualenv + not function on it. + * PycURL multi objects now have the multi constants defined on them. + Previously the constants were only available on pycurl module. + The new behavior matches that of curl and share objects. + * PycURL share objects can now be closed via the close() method. + * PycURL will no longer call `curl-config --static-libs` if + `curl-config --libs` succeeds and returns output. + Systems on which neither `curl-config --libs` nor + `curl-config --static-libs` do the right thing should provide + a `curl-config` wrapper that is sane. + * Added CURLFORM_BUFFER and CURLFORM_BUFFERPTR. + * pycurl.version and user agent string now include both + PycURL version and libcurl version as separate items. + * Added CURLOPT_DNS_SERVERS. + * PycURL can now be dynamically linked against libcurl on Windows + if PYCURL_USE_LIBCURL_DLL is #defined during compilation. + * Breaking change: opensocket callback now takes an additional + (address, port) tuple argument. Existing callbacks will need to + be modified to accept this new argument. + https://github.com/pycurl/pycurl/pull/18 +- Update to version 7.19.0.3 + * Re-release of 7.19.0.2 with minor changes to build Windows packages + due to botched 7.19.0.2 files on PyPi. + http://curl.haxx.se/mail/curlpython-2013-12/0021.html +- Update to version 7.19.0.2 [requires libcurl-7.19.0 or better] - 2013-10-08 + * Fixed a bug in a commit made in 2008 but not released until 7.19.0.1 + which caused CURLOPT_POSTFIELDS to not correctly increment reference + count of the object being given as its argument, despite libcurl not + copying the data provided by said object. + * Added support for libcurl pause/unpause functionality, + via curl_easy_pause call and returning READFUNC_PAUSE from + read callback function. +- Update to version 7.19.0.1 [requires libcurl-7.19.0 or better] - 2013-09-23 + * Test matrix tool added to test against all supported Python and + libcurl versions. + * Python 2.4 is now the minimum required version. + * Source code, bugs and patches are now kept on GitHub. + * Added CURLINFO_CERTINFO and CURLOPT_CERTINFO. + * Added CURLOPT_RESOLVE. + * PycURL can now be used with Python binaries without thread + support. + * gcrypt is no longer initialized when a newer version of gnutls + is used. + * Marked NSS as supported. + * Fixed relative URL request logic. + * Fixed a memory leak in util_curl_init. + * Added CURLOPT_USERNAME and CURLOPT_PASSWORD. + * Fixed handling of big timeout values. + * Added GLOBAL_ACK_EINTR. + * setopt(..., None) can be used as unsetopt(). + * CURLOPT_RANGE can now be unset. + * Write callback can return -1 to signal user abort. + * Reorganized tests into an automated test suite. + * Added CURLOPT_SEEKFUNCTION and CURLOPT_SEEKDATA. + * Cleaned up website. + * Fix pycurl.reset() (patch by <johansen at sun.com>). + * Fix install routine in setup.py where + certain platforms (Solaris, Mac OSX, etc) + would search for a static copy of libcurl (dbp). + * Fixed build on OpenSolaris 0906 and other platforms on which + curl-config does not have a --static-libs option. + * No longer keep string options copies in the + Curl Python objects, since string options are + now managed by libcurl. +- Add additional dependencies +- Remove no longer necessary patch: + * pycurl-7.18.1-nostaticlibs.patch + +------------------------------------------------------------------- Old: ---- pycurl-7.18.1-nostaticlibs.patch pycurl-7.19.0.tar.gz pycurl-python3.patch New: ---- pycurl-7.19.3.1.tar.gz ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ python-pycurl.spec ++++++ --- /var/tmp/diff_new_pack.whf2kS/_old 2014-05-27 18:23:51.000000000 +0200 +++ /var/tmp/diff_new_pack.whf2kS/_new 2014-05-27 18:23:51.000000000 +0200 @@ -1,7 +1,7 @@ # # spec file for package python-pycurl # -# Copyright (c) 2013 SUSE LINUX Products GmbH, Nuernberg, Germany. +# Copyright (c) 2014 SUSE LINUX Products GmbH, Nuernberg, Germany. # # All modifications and additions to the file contributed by third parties # remain the property of their copyright owners, unless otherwise agreed @@ -17,19 +17,25 @@ Name: python-pycurl -Version: 7.19.0 +Version: 7.19.3.1 Release: 0 Url: http://pycurl.sourceforge.net/ Summary: PycURL -- cURL library module License: LGPL-2.1+ and MIT Group: Development/Languages/Python -Source: http://pycurl.sourceforge.net/download/pycurl-%{version}.tar.gz -Patch0: pycurl-7.18.1-nostaticlibs.patch -Patch1: pycurl-no-runtime-curlvercheck.patch +Source: https://pypi.python.org/packages/source/p/pycurl/pycurl-%{version}.tar.gz +Patch0: pycurl-no-runtime-curlvercheck.patch BuildRoot: %{_tmppath}/%{name}-%{version}-build BuildRequires: libcurl-devel >= 7.19.0 BuildRequires: openssl-devel BuildRequires: python-devel +BuildRequires: python-bottle +BuildRequires: python-CherryPy +BuildRequires: python-nose +BuildRequires: python-simplejson +Requires: python-bottle +Requires: python-CherryPy +Requires: python-simplejson %if 0%{?suse_version} %py_requires %endif @@ -52,22 +58,22 @@ %prep %setup -q -n pycurl-%{version} -%patch0 -%patch1 -p1 +# %patch0 -p1 + %build -CFLAGS="%{optflags}" python setup.py build +CFLAGS="%{optflags}" python setup.py build --with-ssl %install -python setup.py install --prefix=%{_prefix} --root=%{buildroot} +python setup.py install --prefix=%{_prefix} --root=%{buildroot} --with-ssl rm -rf %{buildroot}%{_datadir}/doc # Remove wrongly installed junk %files %defattr(-,root,root,-) -%doc ChangeLog COPYING README TODO +%doc AUTHORS ChangeLog COPYING-LGPL COPYING-MIT README.rst %{python_sitearch}/* %files doc %defattr(-,root,root) -%doc examples doc/*.html +%doc examples doc/*.rst %changelog ++++++ pycurl-7.19.0.tar.gz -> pycurl-7.19.3.1.tar.gz ++++++ ++++ 14829 lines of diff (skipped) ++++++ pycurl-no-runtime-curlvercheck.patch ++++++ --- /var/tmp/diff_new_pack.whf2kS/_old 2014-05-27 18:23:51.000000000 +0200 +++ /var/tmp/diff_new_pack.whf2kS/_new 2014-05-27 18:23:51.000000000 +0200 @@ -1,27 +1,11 @@ ---- pycurl-7.19.0.orig/src/pycurl.c -+++ pycurl-7.19.0/src/pycurl.c -@@ -3450,7 +3450,7 @@ initpycurl(void) - - /* Add version strings to the module */ - insstr(d, "version", curl_version()); +--- a/src/pycurl.c 2014-02-06 10:27:56.000000000 +0100 ++++ b/src/pycurl.c 2014-05-20 16:09:57.513592172 +0200 +@@ -4526,7 +4526,7 @@ + #undef PYCURL_VERSION_PREFIX_SIZE + + insobj2(d, NULL, "version", PyText_FromString(g_pycurl_useragent)); - insstr(d, "COMPILE_DATE", __DATE__ " " __TIME__); + //insstr(d, "COMPILE_DATE", __DATE__ " " __TIME__); insint(d, "COMPILE_PY_VERSION_HEX", PY_VERSION_HEX); insint(d, "COMPILE_LIBCURL_VERSION_NUM", LIBCURL_VERSION_NUM); -@@ -3883,6 +3883,7 @@ initpycurl(void) - insint_s(d, "LOCK_DATA_COOKIE", CURL_LOCK_DATA_COOKIE); - insint_s(d, "LOCK_DATA_DNS", CURL_LOCK_DATA_DNS); - -+#if 0 - /* Check the version, as this has caused nasty problems in - * some cases. */ - vi = curl_version_info(CURLVERSION_NOW); -@@ -3894,6 +3895,7 @@ initpycurl(void) - Py_FatalError("pycurl: libcurl link-time version is older than compile-time version"); - assert(0); - } -+#endif - - /* Initialize callback locks if ssl is enabled */ - #if defined(PYCURL_NEED_SSL_TSL) -- To unsubscribe, e-mail: opensuse-commit+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-commit+help@opensuse.org