Hello community, here is the log from the commit of package sax3 for openSUSE:Factory checked in at 2014-05-06 14:03:17 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/sax3 (Old) and /work/SRC/openSUSE:Factory/.sax3.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "sax3" Changes: -------- --- /work/SRC/openSUSE:Factory/sax3/sax3.changes 2013-05-27 10:01:37.000000000 +0200 +++ /work/SRC/openSUSE:Factory/.sax3.new/sax3.changes 2014-05-06 14:03:18.000000000 +0200 @@ -1,0 +2,11 @@ +Mon May 5 15:57:20 UTC 2014 - manugupt1@gmail.com + +- sax3-keyboard text domain was incorrect. Updated it for sax3-keyboard + +---------------------------------- --------------------------------- +Sun May 4 12:46:08 UTC 2014 - manugupt1@gmail.com + +- Translation Support added for sax3 modules along with PO files +- Logs are much more beautiful for some modules + +------------------------------------------------------------------- Old: ---- sax3-0.1.1.tar.gz New: ---- sax3-0.1.2.tar.gz ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ sax3.spec ++++++ --- /var/tmp/diff_new_pack.ccbMsF/_old 2014-05-06 14:03:19.000000000 +0200 +++ /var/tmp/diff_new_pack.ccbMsF/_new 2014-05-06 14:03:19.000000000 +0200 @@ -17,7 +17,7 @@ Name: sax3 -Version: 0.1.1 +Version: 0.1.2 Release: 0 Summary: A Graphical Configuration Tool for X License: GPL-3.0 ++++++ sax3-0.1.1.tar.gz -> sax3-0.1.2.tar.gz ++++++ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/sax3-0.1.1/COPYING.GPL-3.0 new/sax3-0.1.2/COPYING.GPL-3.0 --- old/sax3-0.1.1/COPYING.GPL-3.0 2013-04-19 09:35:03.000000000 +0200 +++ new/sax3-0.1.2/COPYING.GPL-3.0 2014-05-05 17:54:08.000000000 +0200 @@ -1,5 +1,638 @@ - SaX3 - openSUSE Advanced X Configuration Utility - Copyright (C) 2011 Manu Gupta<manugupt1@opensuse.org> + GNU GENERAL PUBLIC LICENSE + Version 3, 29 June 2007 + + Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/> + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + Preamble + + The GNU General Public License is a free, copyleft license for +software and other kinds of works. + + The licenses for most software and other practical works are designed +to take away your freedom to share and change the works. By contrast, +the GNU General Public License is intended to guarantee your freedom to +share and change all versions of a program--to make sure it remains free +software for all its users. We, the Free Software Foundation, use the +GNU General Public License for most of our software; it applies also to +any other work released this way by its authors. You can apply it to +your programs, too. + + When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +them if you wish), that you receive source code or can get it if you +want it, that you can change the software or use pieces of it in new +free programs, and that you know you can do these things. + + To protect your rights, we need to prevent others from denying you +these rights or asking you to surrender the rights. Therefore, you have +certain responsibilities if you distribute copies of the software, or if +you modify it: responsibilities to respect the freedom of others. + + For example, if you distribute copies of such a program, whether +gratis or for a fee, you must pass on to the recipients the same +freedoms that you received. You must make sure that they, too, receive +or can get the source code. And you must show them these terms so they +know their rights. + + Developers that use the GNU GPL protect your rights with two steps: +(1) assert copyright on the software, and (2) offer you this License +giving you legal permission to copy, distribute and/or modify it. + + For the developers' and authors' protection, the GPL clearly explains +that there is no warranty for this free software. For both users' and +authors' sake, the GPL requires that modified versions be marked as +changed, so that their problems will not be attributed erroneously to +authors of previous versions. + + Some devices are designed to deny users access to install or run +modified versions of the software inside them, although the manufacturer +can do so. This is fundamentally incompatible with the aim of +protecting users' freedom to change the software. The systematic +pattern of such abuse occurs in the area of products for individuals to +use, which is precisely where it is most unacceptable. Therefore, we +have designed this version of the GPL to prohibit the practice for those +products. If such problems arise substantially in other domains, we +stand ready to extend this provision to those domains in future versions +of the GPL, as needed to protect the freedom of users. + + Finally, every program is threatened constantly by software patents. +States should not allow patents to restrict development and use of +software on general-purpose computers, but in those that do, we wish to +avoid the special danger that patents applied to a free program could +make it effectively proprietary. To prevent this, the GPL assures that +patents cannot be used to render the program non-free. + + The precise terms and conditions for copying, distribution and +modification follow. + + TERMS AND CONDITIONS + + 0. Definitions. + + "This License" refers to version 3 of the GNU General Public License. + + "Copyright" also means copyright-like laws that apply to other kinds of +works, such as semiconductor masks. + + "The Program" refers to any copyrightable work licensed under this +License. Each licensee is addressed as "you". "Licensees" and +"recipients" may be individuals or organizations. + + To "modify" a work means to copy from or adapt all or part of the work +in a fashion requiring copyright permission, other than the making of an +exact copy. The resulting work is called a "modified version" of the +earlier work or a work "based on" the earlier work. + + A "covered work" means either the unmodified Program or a work based +on the Program. + + To "propagate" a work means to do anything with it that, without +permission, would make you directly or secondarily liable for +infringement under applicable copyright law, except executing it on a +computer or modifying a private copy. Propagation includes copying, +distribution (with or without modification), making available to the +public, and in some countries other activities as well. + + To "convey" a work means any kind of propagation that enables other +parties to make or receive copies. Mere interaction with a user through +a computer network, with no transfer of a copy, is not conveying. + + An interactive user interface displays "Appropriate Legal Notices" +to the extent that it includes a convenient and prominently visible +feature that (1) displays an appropriate copyright notice, and (2) +tells the user that there is no warranty for the work (except to the +extent that warranties are provided), that licensees may convey the +work under this License, and how to view a copy of this License. If +the interface presents a list of user commands or options, such as a +menu, a prominent item in the list meets this criterion. + + 1. Source Code. + + The "source code" for a work means the preferred form of the work +for making modifications to it. "Object code" means any non-source +form of a work. + + A "Standard Interface" means an interface that either is an official +standard defined by a recognized standards body, or, in the case of +interfaces specified for a particular programming language, one that +is widely used among developers working in that language. + + The "System Libraries" of an executable work include anything, other +than the work as a whole, that (a) is included in the normal form of +packaging a Major Component, but which is not part of that Major +Component, and (b) serves only to enable use of the work with that +Major Component, or to implement a Standard Interface for which an +implementation is available to the public in source code form. A +"Major Component", in this context, means a major essential component +(kernel, window system, and so on) of the specific operating system +(if any) on which the executable work runs, or a compiler used to +produce the work, or an object code interpreter used to run it. + + The "Corresponding Source" for a work in object code form means all +the source code needed to generate, install, and (for an executable +work) run the object code and to modify the work, including scripts to +control those activities. However, it does not include the work's +System Libraries, or general-purpose tools or generally available free +programs which are used unmodified in performing those activities but +which are not part of the work. For example, Corresponding Source +includes interface definition files associated with source files for +the work, and the source code for shared libraries and dynamically +linked subprograms that the work is specifically designed to require, +such as by intimate data communication or control flow between those +subprograms and other parts of the work. + + The Corresponding Source need not include anything that users +can regenerate automatically from other parts of the Corresponding +Source. + + The Corresponding Source for a work in source code form is that +same work. + + 2. Basic Permissions. + + All rights granted under this License are granted for the term of +copyright on the Program, and are irrevocable provided the stated +conditions are met. This License explicitly affirms your unlimited +permission to run the unmodified Program. The output from running a +covered work is covered by this License only if the output, given its +content, constitutes a covered work. This License acknowledges your +rights of fair use or other equivalent, as provided by copyright law. + + You may make, run and propagate covered works that you do not +convey, without conditions so long as your license otherwise remains +in force. You may convey covered works to others for the sole purpose +of having them make modifications exclusively for you, or provide you +with facilities for running those works, provided that you comply with +the terms of this License in conveying all material for which you do +not control copyright. Those thus making or running the covered works +for you must do so exclusively on your behalf, under your direction +and control, on terms that prohibit them from making any copies of +your copyrighted material outside their relationship with you. + + Conveying under any other circumstances is permitted solely under +the conditions stated below. Sublicensing is not allowed; section 10 +makes it unnecessary. + + 3. Protecting Users' Legal Rights From Anti-Circumvention Law. + + No covered work shall be deemed part of an effective technological +measure under any applicable law fulfilling obligations under article +11 of the WIPO copyright treaty adopted on 20 December 1996, or +similar laws prohibiting or restricting circumvention of such +measures. + + When you convey a covered work, you waive any legal power to forbid +circumvention of technological measures to the extent such circumvention +is effected by exercising rights under this License with respect to +the covered work, and you disclaim any intention to limit operation or +modification of the work as a means of enforcing, against the work's +users, your or third parties' legal rights to forbid circumvention of +technological measures. + + 4. Conveying Verbatim Copies. + + You may convey verbatim copies of the Program's source code as you +receive it, in any medium, provided that you conspicuously and +appropriately publish on each copy an appropriate copyright notice; +keep intact all notices stating that this License and any +non-permissive terms added in accord with section 7 apply to the code; +keep intact all notices of the absence of any warranty; and give all +recipients a copy of this License along with the Program. + + You may charge any price or no price for each copy that you convey, +and you may offer support or warranty protection for a fee. + + 5. Conveying Modified Source Versions. + + You may convey a work based on the Program, or the modifications to +produce it from the Program, in the form of source code under the +terms of section 4, provided that you also meet all of these conditions: + + a) The work must carry prominent notices stating that you modified + it, and giving a relevant date. + + b) The work must carry prominent notices stating that it is + released under this License and any conditions added under section + 7. This requirement modifies the requirement in section 4 to + "keep intact all notices". + + c) You must license the entire work, as a whole, under this + License to anyone who comes into possession of a copy. This + License will therefore apply, along with any applicable section 7 + additional terms, to the whole of the work, and all its parts, + regardless of how they are packaged. This License gives no + permission to license the work in any other way, but it does not + invalidate such permission if you have separately received it. + + d) If the work has interactive user interfaces, each must display + Appropriate Legal Notices; however, if the Program has interactive + interfaces that do not display Appropriate Legal Notices, your + work need not make them do so. + + A compilation of a covered work with other separate and independent +works, which are not by their nature extensions of the covered work, +and which are not combined with it such as to form a larger program, +in or on a volume of a storage or distribution medium, is called an +"aggregate" if the compilation and its resulting copyright are not +used to limit the access or legal rights of the compilation's users +beyond what the individual works permit. Inclusion of a covered work +in an aggregate does not cause this License to apply to the other +parts of the aggregate. + + 6. Conveying Non-Source Forms. + + You may convey a covered work in object code form under the terms +of sections 4 and 5, provided that you also convey the +machine-readable Corresponding Source under the terms of this License, +in one of these ways: + + a) Convey the object code in, or embodied in, a physical product + (including a physical distribution medium), accompanied by the + Corresponding Source fixed on a durable physical medium + customarily used for software interchange. + + b) Convey the object code in, or embodied in, a physical product + (including a physical distribution medium), accompanied by a + written offer, valid for at least three years and valid for as + long as you offer spare parts or customer support for that product + model, to give anyone who possesses the object code either (1) a + copy of the Corresponding Source for all the software in the + product that is covered by this License, on a durable physical + medium customarily used for software interchange, for a price no + more than your reasonable cost of physically performing this + conveying of source, or (2) access to copy the + Corresponding Source from a network server at no charge. + + c) Convey individual copies of the object code with a copy of the + written offer to provide the Corresponding Source. This + alternative is allowed only occasionally and noncommercially, and + only if you received the object code with such an offer, in accord + with subsection 6b. + + d) Convey the object code by offering access from a designated + place (gratis or for a charge), and offer equivalent access to the + Corresponding Source in the same way through the same place at no + further charge. You need not require recipients to copy the + Corresponding Source along with the object code. If the place to + copy the object code is a network server, the Corresponding Source + may be on a different server (operated by you or a third party) + that supports equivalent copying facilities, provided you maintain + clear directions next to the object code saying where to find the + Corresponding Source. Regardless of what server hosts the + Corresponding Source, you remain obligated to ensure that it is + available for as long as needed to satisfy these requirements. + + e) Convey the object code using peer-to-peer transmission, provided + you inform other peers where the object code and Corresponding + Source of the work are being offered to the general public at no + charge under subsection 6d. + + A separable portion of the object code, whose source code is excluded +from the Corresponding Source as a System Library, need not be +included in conveying the object code work. + + A "User Product" is either (1) a "consumer product", which means any +tangible personal property which is normally used for personal, family, +or household purposes, or (2) anything designed or sold for incorporation +into a dwelling. In determining whether a product is a consumer product, +doubtful cases shall be resolved in favor of coverage. For a particular +product received by a particular user, "normally used" refers to a +typical or common use of that class of product, regardless of the status +of the particular user or of the way in which the particular user +actually uses, or expects or is expected to use, the product. A product +is a consumer product regardless of whether the product has substantial +commercial, industrial or non-consumer uses, unless such uses represent +the only significant mode of use of the product. + + "Installation Information" for a User Product means any methods, +procedures, authorization keys, or other information required to install +and execute modified versions of a covered work in that User Product from +a modified version of its Corresponding Source. The information must +suffice to ensure that the continued functioning of the modified object +code is in no case prevented or interfered with solely because +modification has been made. + + If you convey an object code work under this section in, or with, or +specifically for use in, a User Product, and the conveying occurs as +part of a transaction in which the right of possession and use of the +User Product is transferred to the recipient in perpetuity or for a +fixed term (regardless of how the transaction is characterized), the +Corresponding Source conveyed under this section must be accompanied +by the Installation Information. But this requirement does not apply +if neither you nor any third party retains the ability to install +modified object code on the User Product (for example, the work has +been installed in ROM). + + The requirement to provide Installation Information does not include a +requirement to continue to provide support service, warranty, or updates +for a work that has been modified or installed by the recipient, or for +the User Product in which it has been modified or installed. Access to a +network may be denied when the modification itself materially and +adversely affects the operation of the network or violates the rules and +protocols for communication across the network. + + Corresponding Source conveyed, and Installation Information provided, +in accord with this section must be in a format that is publicly +documented (and with an implementation available to the public in +source code form), and must require no special password or key for +unpacking, reading or copying. + + 7. Additional Terms. + + "Additional permissions" are terms that supplement the terms of this +License by making exceptions from one or more of its conditions. +Additional permissions that are applicable to the entire Program shall +be treated as though they were included in this License, to the extent +that they are valid under applicable law. If additional permissions +apply only to part of the Program, that part may be used separately +under those permissions, but the entire Program remains governed by +this License without regard to the additional permissions. + + When you convey a copy of a covered work, you may at your option +remove any additional permissions from that copy, or from any part of +it. (Additional permissions may be written to require their own +removal in certain cases when you modify the work.) You may place +additional permissions on material, added by you to a covered work, +for which you have or can give appropriate copyright permission. + + Notwithstanding any other provision of this License, for material you +add to a covered work, you may (if authorized by the copyright holders of +that material) supplement the terms of this License with terms: + + a) Disclaiming warranty or limiting liability differently from the + terms of sections 15 and 16 of this License; or + + b) Requiring preservation of specified reasonable legal notices or + author attributions in that material or in the Appropriate Legal + Notices displayed by works containing it; or + + c) Prohibiting misrepresentation of the origin of that material, or + requiring that modified versions of such material be marked in + reasonable ways as different from the original version; or + + d) Limiting the use for publicity purposes of names of licensors or + authors of the material; or + + e) Declining to grant rights under trademark law for use of some + trade names, trademarks, or service marks; or + + f) Requiring indemnification of licensors and authors of that + material by anyone who conveys the material (or modified versions of + it) with contractual assumptions of liability to the recipient, for + any liability that these contractual assumptions directly impose on + those licensors and authors. + + All other non-permissive additional terms are considered "further +restrictions" within the meaning of section 10. If the Program as you +received it, or any part of it, contains a notice stating that it is +governed by this License along with a term that is a further +restriction, you may remove that term. If a license document contains +a further restriction but permits relicensing or conveying under this +License, you may add to a covered work material governed by the terms +of that license document, provided that the further restriction does +not survive such relicensing or conveying. + + If you add terms to a covered work in accord with this section, you +must place, in the relevant source files, a statement of the +additional terms that apply to those files, or a notice indicating +where to find the applicable terms. + + Additional terms, permissive or non-permissive, may be stated in the +form of a separately written license, or stated as exceptions; +the above requirements apply either way. + + 8. Termination. + + You may not propagate or modify a covered work except as expressly +provided under this License. Any attempt otherwise to propagate or +modify it is void, and will automatically terminate your rights under +this License (including any patent licenses granted under the third +paragraph of section 11). + + However, if you cease all violation of this License, then your +license from a particular copyright holder is reinstated (a) +provisionally, unless and until the copyright holder explicitly and +finally terminates your license, and (b) permanently, if the copyright +holder fails to notify you of the violation by some reasonable means +prior to 60 days after the cessation. + + Moreover, your license from a particular copyright holder is +reinstated permanently if the copyright holder notifies you of the +violation by some reasonable means, this is the first time you have +received notice of violation of this License (for any work) from that +copyright holder, and you cure the violation prior to 30 days after +your receipt of the notice. + + Termination of your rights under this section does not terminate the +licenses of parties who have received copies or rights from you under +this License. If your rights have been terminated and not permanently +reinstated, you do not qualify to receive new licenses for the same +material under section 10. + + 9. Acceptance Not Required for Having Copies. + + You are not required to accept this License in order to receive or +run a copy of the Program. Ancillary propagation of a covered work +occurring solely as a consequence of using peer-to-peer transmission +to receive a copy likewise does not require acceptance. However, +nothing other than this License grants you permission to propagate or +modify any covered work. These actions infringe copyright if you do +not accept this License. Therefore, by modifying or propagating a +covered work, you indicate your acceptance of this License to do so. + + 10. Automatic Licensing of Downstream Recipients. + + Each time you convey a covered work, the recipient automatically +receives a license from the original licensors, to run, modify and +propagate that work, subject to this License. You are not responsible +for enforcing compliance by third parties with this License. + + An "entity transaction" is a transaction transferring control of an +organization, or substantially all assets of one, or subdividing an +organization, or merging organizations. If propagation of a covered +work results from an entity transaction, each party to that +transaction who receives a copy of the work also receives whatever +licenses to the work the party's predecessor in interest had or could +give under the previous paragraph, plus a right to possession of the +Corresponding Source of the work from the predecessor in interest, if +the predecessor has it or can get it with reasonable efforts. + + You may not impose any further restrictions on the exercise of the +rights granted or affirmed under this License. For example, you may +not impose a license fee, royalty, or other charge for exercise of +rights granted under this License, and you may not initiate litigation +(including a cross-claim or counterclaim in a lawsuit) alleging that +any patent claim is infringed by making, using, selling, offering for +sale, or importing the Program or any portion of it. + + 11. Patents. + + A "contributor" is a copyright holder who authorizes use under this +License of the Program or a work on which the Program is based. The +work thus licensed is called the contributor's "contributor version". + + A contributor's "essential patent claims" are all patent claims +owned or controlled by the contributor, whether already acquired or +hereafter acquired, that would be infringed by some manner, permitted +by this License, of making, using, or selling its contributor version, +but do not include claims that would be infringed only as a +consequence of further modification of the contributor version. For +purposes of this definition, "control" includes the right to grant +patent sublicenses in a manner consistent with the requirements of +this License. + + Each contributor grants you a non-exclusive, worldwide, royalty-free +patent license under the contributor's essential patent claims, to +make, use, sell, offer for sale, import and otherwise run, modify and +propagate the contents of its contributor version. + + In the following three paragraphs, a "patent license" is any express +agreement or commitment, however denominated, not to enforce a patent +(such as an express permission to practice a patent or covenant not to +sue for patent infringement). To "grant" such a patent license to a +party means to make such an agreement or commitment not to enforce a +patent against the party. + + If you convey a covered work, knowingly relying on a patent license, +and the Corresponding Source of the work is not available for anyone +to copy, free of charge and under the terms of this License, through a +publicly available network server or other readily accessible means, +then you must either (1) cause the Corresponding Source to be so +available, or (2) arrange to deprive yourself of the benefit of the +patent license for this particular work, or (3) arrange, in a manner +consistent with the requirements of this License, to extend the patent +license to downstream recipients. "Knowingly relying" means you have +actual knowledge that, but for the patent license, your conveying the +covered work in a country, or your recipient's use of the covered work +in a country, would infringe one or more identifiable patents in that +country that you have reason to believe are valid. + + If, pursuant to or in connection with a single transaction or +arrangement, you convey, or propagate by procuring conveyance of, a +covered work, and grant a patent license to some of the parties +receiving the covered work authorizing them to use, propagate, modify +or convey a specific copy of the covered work, then the patent license +you grant is automatically extended to all recipients of the covered +work and works based on it. + + A patent license is "discriminatory" if it does not include within +the scope of its coverage, prohibits the exercise of, or is +conditioned on the non-exercise of one or more of the rights that are +specifically granted under this License. You may not convey a covered +work if you are a party to an arrangement with a third party that is +in the business of distributing software, under which you make payment +to the third party based on the extent of your activity of conveying +the work, and under which the third party grants, to any of the +parties who would receive the covered work from you, a discriminatory +patent license (a) in connection with copies of the covered work +conveyed by you (or copies made from those copies), or (b) primarily +for and in connection with specific products or compilations that +contain the covered work, unless you entered into that arrangement, +or that patent license was granted, prior to 28 March 2007. + + Nothing in this License shall be construed as excluding or limiting +any implied license or other defenses to infringement that may +otherwise be available to you under applicable patent law. + + 12. No Surrender of Others' Freedom. + + If conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot convey a +covered work so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you may +not convey it at all. For example, if you agree to terms that obligate you +to collect a royalty for further conveying from those to whom you convey +the Program, the only way you could satisfy both those terms and this +License would be to refrain entirely from conveying the Program. + + 13. Use with the GNU Affero General Public License. + + Notwithstanding any other provision of this License, you have +permission to link or combine any covered work with a work licensed +under version 3 of the GNU Affero General Public License into a single +combined work, and to convey the resulting work. The terms of this +License will continue to apply to the part which is the covered work, +but the special requirements of the GNU Affero General Public License, +section 13, concerning interaction through a network will apply to the +combination as such. + + 14. Revised Versions of this License. + + The Free Software Foundation may publish revised and/or new versions of +the GNU General Public License from time to time. Such new versions will +be similar in spirit to the present version, but may differ in detail to +address new problems or concerns. + + Each version is given a distinguishing version number. If the +Program specifies that a certain numbered version of the GNU General +Public License "or any later version" applies to it, you have the +option of following the terms and conditions either of that numbered +version or of any later version published by the Free Software +Foundation. If the Program does not specify a version number of the +GNU General Public License, you may choose any version ever published +by the Free Software Foundation. + + If the Program specifies that a proxy can decide which future +versions of the GNU General Public License can be used, that proxy's +public statement of acceptance of a version permanently authorizes you +to choose that version for the Program. + + Later license versions may give you additional or different +permissions. However, no additional obligations are imposed on any +author or copyright holder as a result of your choosing to follow a +later version. + + 15. Disclaimer of Warranty. + + THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY +APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT +HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY +OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, +THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM +IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF +ALL NECESSARY SERVICING, REPAIR OR CORRECTION. + + 16. Limitation of Liability. + + IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS +THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY +GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE +USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF +DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD +PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), +EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF +SUCH DAMAGES. + + 17. Interpretation of Sections 15 and 16. + + If the disclaimer of warranty and limitation of liability provided +above cannot be given local legal effect according to their terms, +reviewing courts shall apply local law that most closely approximates +an absolute waiver of all civil liability in connection with the +Program, unless a warranty or assumption of liability accompanies a +copy of the Program in return for a fee. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Programs + + If you develop a new program, and you want it to be of the greatest +possible use to the public, the best way to achieve this is to make it +free software which everyone can redistribute and change under these terms. + + To do so, attach the following notices to the program. It is safest +to attach them to the start of each source file to most effectively +state the exclusion of warranty; and each file should have at least +the "copyright" line and a pointer to where the full notice is found. + + <one line to give the program's name and a brief idea of what it does.> + Copyright (C) <year> <name of author> This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -14,3 +647,28 @@ You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. +Also add information on how to contact you by electronic and paper mail. + + If the program does terminal interaction, make it output a short +notice like this when it starts in an interactive mode: + + <program> Copyright (C) <year> <name of author> + This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'. + This is free software, and you are welcome to redistribute it + under certain conditions; type `show c' for details. + +The hypothetical commands `show w' and `show c' should show the appropriate +parts of the General Public License. Of course, your program's commands +might be different; for a GUI interface, you would use an "about box". + + You should also get your employer (if you work as a programmer) or school, +if any, to sign a "copyright disclaimer" for the program, if necessary. +For more information on this, and how to apply and follow the GNU GPL, see +<http://www.gnu.org/licenses/>. + + The GNU General Public License does not permit incorporating your program +into proprietary programs. If your program is a subroutine library, you +may consider it more useful to permit linking proprietary applications with +the library. If this is what you want to do, use the GNU Lesser General +Public License instead of this License. But first, please read +<http://www.gnu.org/philosophy/why-not-lgpl.html>. diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/sax3-0.1.1/src/CMakeLists.txt new/sax3-0.1.2/src/CMakeLists.txt --- old/sax3-0.1.1/src/CMakeLists.txt 2013-04-19 09:35:03.000000000 +0200 +++ new/sax3-0.1.2/src/CMakeLists.txt 2014-05-05 17:54:07.000000000 +0200 @@ -4,6 +4,7 @@ add_subdirectory(res) add_subdirectory(modules.d) add_subdirectory(man) +add_subdirectory(translation) add_library(sax3-yuif SHARED ui/yuifactory.cxx ui/yui.cxx) add_executable(sax3 main.cxx) diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/sax3-0.1.1/src/keyboard.cxx new/sax3-0.1.2/src/keyboard.cxx --- old/sax3-0.1.1/src/keyboard.cxx 2013-04-19 09:35:03.000000000 +0200 +++ new/sax3-0.1.2/src/keyboard.cxx 2014-05-05 17:54:07.000000000 +0200 @@ -624,8 +624,8 @@ int main(){ setlocale(LC_ALL,""); - bindtextdomain("sax3","/usr/share/locale"); - textdomain("sax3"); + bindtextdomain("sax3-keyboard","/usr/share/locale"); + textdomain("sax3-keyboard"); keyboard * kb = new keyboard(); kb->drawLayout(); diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/sax3-0.1.1/src/main.cxx new/sax3-0.1.2/src/main.cxx --- old/sax3-0.1.1/src/main.cxx 2013-04-19 09:35:03.000000000 +0200 +++ new/sax3-0.1.2/src/main.cxx 2014-05-05 17:54:07.000000000 +0200 @@ -16,6 +16,7 @@ #include "ui/yuifactory.h" #define _(STRING) gettext(STRING) +#define LOG_TAG "[SaX3]" using namespace std; @@ -39,7 +40,6 @@ vector<UI::yPushButton*> button; vector<UI::yImage*> image; vector<string> execs; -// UI::yImage image;UI::yPushButton button; protected: void makeEntry(char s1[],char s2[],char s3[]){ strcpy(getEntry,s1); @@ -58,17 +58,15 @@ aug_set(aug,"/augeas/load/Desktop/lens", "Desktop.lns"); aug_set(aug,"/augeas/load/Desktop/incl[last()+1]","/usr/share/sax3/modules.d/*"); err = aug_load(aug); - cout<<"------------------------------------------------------------------<<<"<<err<<">>>"; + cout<<LOG_TAG<<" Desktop Lens Loading status is "<<err<<"(0 indicates success)"<<endl; if(dp!=NULL){ - cout<<"DP IF"; while(ep = readdir(dp)){ if(strcmp(ep->d_name,".") && strcmp(ep->d_name,"..")){ - cout<<"__________________________________________________________"<<err<<endl; UI::yHLayout * hLayout = factory->createHLayout(mainLayout); getEntry = new char[300]; makeEntry("/files/usr/share/sax3/modules.d/",ep->d_name,"/*/Icon"); err = aug_get(aug,getEntry,&value); - cout<<getEntry; + cout<<LOG_TAG<<getEntry<<" : "<<err<<" (1 indicates success, 0 is cannot retreive, -1 is too bad)"<<endl; if(err==1) image.push_back(factory->createImage(hLayout,_(value))); delete getEntry; @@ -76,6 +74,8 @@ getEntry = new char[100]; makeEntry("/files/usr/share/sax3/modules.d/",ep->d_name,"/*/Name"); err = aug_get(aug,getEntry,&value); + cout<<LOG_TAG<<getEntry<<" : "<<err<<" (1 indicates success, 0 is cannot retreive, -1 is too bad)"<<endl; + cout<<LOG_TAG<<"[VALUE]"<<value<<endl; if(err==1) button.push_back(factory->createPushButton(hLayout,_(value))); delete getEntry; @@ -83,10 +83,9 @@ getEntry = new char[100]; makeEntry("/files/usr/share/sax3/modules.d/",ep->d_name,"/*/Exec"); err = aug_get(aug,getEntry,&value); + cout<<LOG_TAG<<getEntry<<" : "<<err<<" (1 indicates success, 0 is cannot retreive, -1 is too bad)"<<endl; if(err==1) execs.push_back(value); - -// cout<<value<<endl; delete getEntry; } } diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/sax3-0.1.1/src/monitors.cxx new/sax3-0.1.2/src/monitors.cxx --- old/sax3-0.1.1/src/monitors.cxx 2013-04-19 09:35:03.000000000 +0200 +++ new/sax3-0.1.2/src/monitors.cxx 2014-05-05 17:54:07.000000000 +0200 @@ -6,12 +6,16 @@ #include<stdio.h> #include<fstream> #include<vector> +#include<locale.h> +#include<libintl.h> + extern "C"{ #include<augeas.h> } #include"ui/yuifactory.h" +#define _(STRING) gettext(STRING) using namespace std; class Monitors{ @@ -180,38 +184,38 @@ void Monitors::initUI(){ dialog = factory->createDialog(60,12); vL1 = factory->createVLayout(dialog); - driverCombo = factory->createComboBox(vL1,"Select the driver"); + driverCombo = factory->createComboBox(vL1,_("Select the driver")); fillUpDriverCombo(); vL2 = factory->createVLayout(vL1); hL1 = factory->createHLayout(vL2); - resolutionCombo = factory->createComboBox(hL1,"Select resolution"); + resolutionCombo = factory->createComboBox(hL1,_("Select resolution")); fillUpResolutionCombo(); - depthCombo = factory->createComboBox(hL1,"Depth"); + depthCombo = factory->createComboBox(hL1,_("Depth")); fillUpDepthCombo(); - enableAdvance = factory->createCheckBox(vL1,"Enable Advanced Settings",false); + enableAdvance = factory->createCheckBox(vL1,_("Enable Advanced Settings"),false); hL2 = factory->createHLayout(vL1); - horizontalLow = factory->createIntField(hL2,"Horizontal Sync Rate(min value)",30,100,50); + horizontalLow = factory->createIntField(hL2,_("Horizontal Sync Rate(min value)"),30,100,50); horizontalLow->setDisabled(); - horizontalHigh = factory->createIntField(hL2,"Horizontal Sync Rate(max value)",30,100,50); + horizontalHigh = factory->createIntField(hL2,_("Horizontal Sync Rate(max value)"),30,100,50); horizontalHigh->setDisabled(); hL3 = factory->createHLayout(vL1); - verticalLow = factory->createIntField(hL3,"Vertical Refresh Rate(min value)",50,120,70); + verticalLow = factory->createIntField(hL3,_("Vertical Refresh Rate(min value)"),50,120,70); verticalLow->setDisabled(); - verticalHigh = factory->createIntField(hL3,"Vertical Refresh Rate(max value)",50,120,70); + verticalHigh = factory->createIntField(hL3,_("Vertical Refresh Rate(max value)"),50,120,70); verticalHigh->setDisabled(); - customCVT = factory->createCheckBox(vL1,"I want my own CVT",false); + customCVT = factory->createCheckBox(vL1,_("I want my own CVT"),false); hL5 = factory->createHLayout(vL1); - xAxis = factory->createIntField(hL5,"X Axis",400,1280,4000); + xAxis = factory->createIntField(hL5,_("X Axis"),400,1280,4000); xAxis->setDisabled(); - yAxis = factory->createIntField(hL5,"Y Axis",400,1280,3000); + yAxis = factory->createIntField(hL5,_("Y Axis"),400,1280,3000); yAxis->setDisabled(); - refreshRate = factory->createIntField(hL5,"Refresh Rate",20,60,200); + refreshRate = factory->createIntField(hL5,_("Refresh Rate"),20,60,200); refreshRate->setDisabled(); hL4 = factory->createHLayout(vL1); - ok = factory->createPushButton(hL4,"Ok"); - cancel = factory->createPushButton(hL4,"Cancel"); + ok = factory->createPushButton(hL4,_("Ok")); + cancel = factory->createPushButton(hL4,_("Cancel")); } bool Monitors::respondToEvent(){ @@ -369,6 +373,9 @@ int main(){ + setlocale(LC_ALL,""); + bindtextdomain("sax3-monitor","/usr/share/locale"); + textdomain("sax3-monitor"); Monitors * m = new Monitors(); m->detectDrivers(); m->detectResolution(); diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/sax3-0.1.1/src/mouse.cxx new/sax3-0.1.2/src/mouse.cxx --- old/sax3-0.1.1/src/mouse.cxx 2013-04-19 09:35:03.000000000 +0200 +++ new/sax3-0.1.2/src/mouse.cxx 2014-05-05 17:54:07.000000000 +0200 @@ -4,12 +4,17 @@ #include<fstream> #include<string.h> #include<cstdio> +#include<libintl.h> +#include<locale.h> + extern "C"{ #include<augeas.h> } #include "ui/yuifactory.h" +#define _(STRING) gettext(STRING) + using namespace std; class Mouse{ @@ -304,31 +309,31 @@ vl1 = factory->createVLayout(dialog); hl1 = factory->createHLayout(vl1); - mouseList = factory->createComboBox(vl1,"Auto Detected Mouse"); + mouseList = factory->createComboBox(vl1,_("Auto Detected Mouse")); fillUpMouseList(); - button3Label = factory->createLabel(vl1,"3 button Emulation Options"); + button3Label = factory->createLabel(vl1,_("3 button Emulation Options")); enableButton3Layout = factory->createHLayout(vl1); - enableButton3Label = factory->createLabel(enableButton3Layout,"Enable 3 Buttons"); + enableButton3Label = factory->createLabel(enableButton3Layout,_("Enable 3 Buttons")); button3 = factory->createRadioButtonGroup(enableButton3Layout); - button3->addButton("Yes"); - button3->addButton("No"); - timeout = factory->createIntField(vl1,"3 Button Timeout",0,1000,50); + button3->addButton(_("Yes")); + button3->addButton(_("No")); + timeout = factory->createIntField(vl1,_("3 Button Timeout"),0,1000,50); timeout->setDisabled(); - wheelLabel = factory->createLabel(vl1,"Wheel Emulation Options"); + wheelLabel = factory->createLabel(vl1,_("Wheel Emulation Options")); enableWheelLayout = factory->createHLayout(vl1); - enableWheelLabel = factory->createLabel(enableWheelLayout,"Enable Wheel Emulation"); + enableWheelLabel = factory->createLabel(enableWheelLayout,_("Enable Wheel Emulation")); wheel = factory->createRadioButtonGroup(enableWheelLayout); - wheel->addButton("Yes"); - wheel->addButton("No"); - wheeltimeout = factory->createIntField(vl1,"Wheel Button Timeout",0,1000,200); + wheel->addButton(_("Yes")); + wheel->addButton(_("No")); + wheeltimeout = factory->createIntField(vl1,_("Wheel Button Timeout"),0,1000,200); wheeltimeout->setDisabled(); - InvX = factory->createCheckBox(vl1,"Invert X Axis",false); - InvY = factory->createCheckBox(vl1,"Invert Y Axis",false); + InvX = factory->createCheckBox(vl1,_("Invert X Axis"),false); + InvY = factory->createCheckBox(vl1,_("Invert Y Axis"),false); - AngleOffset = factory->createIntField(vl1,"Angle Offset in degrees",0,360,0); + AngleOffset = factory->createIntField(vl1,_("Angle Offset in degrees"),0,360,0); buttonLayout = factory->createHLayout(vl1); - okButton = factory->createPushButton(buttonLayout,"Save"); - cancelButton = factory->createPushButton(buttonLayout,"Close"); + okButton = factory->createPushButton(buttonLayout,_("Save")); + cancelButton = factory->createPushButton(buttonLayout,_("Close")); } Mouse::~Mouse(){ delete cancelButton; @@ -507,6 +512,9 @@ int main(){ + setlocale(LC_ALL,""); + bindtextdomain("sax3-mouse","/usr/share/locale"); + textdomain("sax3-mouse"); Mouse * m = new Mouse(); m->autodetect(); m->initUI(); diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/sax3-0.1.1/src/touchpad.cxx new/sax3-0.1.2/src/touchpad.cxx --- old/sax3-0.1.1/src/touchpad.cxx 2013-04-19 09:35:03.000000000 +0200 +++ new/sax3-0.1.2/src/touchpad.cxx 2014-05-05 17:54:07.000000000 +0200 @@ -4,12 +4,17 @@ #include<fstream> #include<string.h> #include<cstdio> +#include<locale.h> +#include<libintl.h> extern "C"{ #include<augeas.h> } #include "ui/yuifactory.h" +#define _(STRING) gettext(STRING) +#define LOG_TAG "[SaX3-Touchpad]" + using namespace std; class touchpad{ @@ -39,10 +44,10 @@ touchpad::touchpad(){ factory = new UI::YUIFactory(); aug=NULL;root=NULL;flag=0;loadpath=NULL; - cout<<"Loading AUgeas"; + cout<<LOG_TAG<<"Loading Augeas"<<endl; aug = aug_init(root,loadpath,flag); if(aug==NULL){ - cout<<"AUGEAS NOT LOADED"; + cout<<LOG_TAG<<"AUGEAS NOT LOADED"<<endl; } } @@ -50,47 +55,47 @@ dialog = factory->createDialog(20,20); vL1 = factory->createVLayout(dialog); thL1 = factory->createHLayout(vL1); - TapButton1 = factory->createCheckBox(thL1,"Emulate Mouse Button 1",false); - TapButton1Click = factory->createComboBox(thL1,"No Of Clicks"); + TapButton1 = factory->createCheckBox(thL1,_("Emulate Mouse Button 1"),false); + TapButton1Click = factory->createComboBox(thL1,_("No Of Clicks")); TapButton1Click->setDisabled(); TapButton1Click->addItem("1"); TapButton1Click->addItem("2"); TapButton1Click->addItem("3"); thL2 = factory->createHLayout(vL1); - TapButton2 = factory->createCheckBox(thL2,"Emulate Mouse Button 2",false); - TapButton2Click = factory->createComboBox(thL2,"No Of Clicks"); + TapButton2 = factory->createCheckBox(thL2,_("Emulate Mouse Button 2"),false); + TapButton2Click = factory->createComboBox(thL2,_("No Of Clicks")); TapButton2Click->setDisabled(); TapButton2Click->addItem("2"); TapButton2Click->addItem("1"); TapButton2Click->addItem("3"); thL3 = factory->createHLayout(vL1); - TapButton3 = factory->createCheckBox(thL3,"Emulate Mouse Button 3",false); - TapButton3Click = factory->createComboBox(thL3,"No Of Clicks"); + TapButton3 = factory->createCheckBox(thL3,_("Emulate Mouse Button 3"),false); + TapButton3Click = factory->createComboBox(thL3,_("No Of Clicks")); TapButton3Click->setDisabled(); TapButton3Click->addItem("3"); TapButton3Click->addItem("2"); TapButton3Click->addItem("1"); - VerticalEdgeScroll = factory->createCheckBox(vL1,"Enable Vertical Edge Scrolling",true); - HorizontalEdgeScroll = factory->createCheckBox(vL1,"Enable horizontal Edge Scrolling",true); - VerticalTwoFingerScroll = factory->createCheckBox(vL1,"Enable 2 finger Vertical Scroll",true); - HorizontalTwoFingerScroll = factory->createCheckBox(vL1,"Enable 2 finger Horizontal Scroll",true); - CircularScroll = factory->createCheckBox(vL1,"Enable Circular Scrolling",false); - CircularLocation = factory->createComboBox(vL1,"Circular Scrolling Location"); - CircularLocation->addItem("Top Edges"); - CircularLocation->addItem("Top Right Corner"); - CircularLocation->addItem("Right Edge "); - CircularLocation->addItem("Bottom Right Corner"); - CircularLocation->addItem("Bottom Edge"); - CircularLocation->addItem("Bottom Left Corner"); - CircularLocation->addItem("Left Edges"); - CircularLocation->addItem("Top Left Corner"); + VerticalEdgeScroll = factory->createCheckBox(vL1,_("Enable Vertical Edge Scrolling"),true); + HorizontalEdgeScroll = factory->createCheckBox(vL1,_("Enable horizontal Edge Scrolling"),true); + VerticalTwoFingerScroll = factory->createCheckBox(vL1,_("Enable 2 finger Vertical Scroll"),true); + HorizontalTwoFingerScroll = factory->createCheckBox(vL1,_("Enable 2 finger Horizontal Scroll"),true); + CircularScroll = factory->createCheckBox(vL1,_("Enable Circular Scrolling"),false); + CircularLocation = factory->createComboBox(vL1,_("Circular Scrolling Location")); + CircularLocation->addItem(_("Top Edges")); + CircularLocation->addItem(_("Top Right Corner")); + CircularLocation->addItem(_("Right Edge ")); + CircularLocation->addItem(_("Bottom Right Corner")); + CircularLocation->addItem(_("Bottom Edge")); + CircularLocation->addItem(_("Bottom Left Corner")); + CircularLocation->addItem(_("Left Edges")); + CircularLocation->addItem(_("Top Left Corner")); CircularLocation->setDisabled(); hL1 = factory->createHLayout(vL1); - okButton = factory->createPushButton(hL1,"Ok"); - cancelButton = factory->createPushButton(hL1,"Cancel"); + okButton = factory->createPushButton(hL1,_("Ok")); + cancelButton = factory->createPushButton(hL1,_("Cancel")); } void touchpad::respondToEvent(){ @@ -268,9 +273,12 @@ } int main(){ - touchpad * t = new touchpad(); - t->initUI(); - t->respondToEvent(); - delete t; - return 0; + setlocale(LC_ALL,""); + bindtextdomain("sax3-touchpad","/usr/share/locale/"); + textdomain("sax3-touchpad"); + touchpad * t = new touchpad(); + t->initUI(); + t->respondToEvent(); + delete t; + return 0; } diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/sax3-0.1.1/src/translation/CMakeLists.txt new/sax3-0.1.2/src/translation/CMakeLists.txt --- old/sax3-0.1.1/src/translation/CMakeLists.txt 1970-01-01 01:00:00.000000000 +0100 +++ new/sax3-0.1.2/src/translation/CMakeLists.txt 2014-05-05 17:54:07.000000000 +0200 @@ -0,0 +1,3 @@ +#FILE(GLOB files "${CMAKE_CURRENT_SOURCE_DIR}/*.desktop") +#INSTALL(FILES ${files} DESTINATION /usr/share/sax3/modules.d) +install(FILES sax3-touchpad.po sax3-keyboard.po sax3-mouse.po sax3-monitor.po DESTINATION /usr/share/sax3/translation) diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/sax3-0.1.1/src/translation/Makefile new/sax3-0.1.2/src/translation/Makefile --- old/sax3-0.1.1/src/translation/Makefile 1970-01-01 01:00:00.000000000 +0100 +++ new/sax3-0.1.2/src/translation/Makefile 2014-05-05 17:54:07.000000000 +0200 @@ -0,0 +1,171 @@ +# CMAKE generated file: DO NOT EDIT! +# Generated by "Unix Makefiles" Generator, CMake Version 3.0 + +# Default target executed when no arguments are given to make. +default_target: all +.PHONY : default_target + +# Allow only one "make -f Makefile2" at a time, but pass parallelism. +.NOTPARALLEL: +.PHONY : .NOTPARALLEL + +#============================================================================= +# Special targets provided by cmake. + +# Disable implicit rules so canonical targets will work. +.SUFFIXES: + +# Remove some rules from gmake that .SUFFIXES does not remove. +SUFFIXES = + +.SUFFIXES: .hpux_make_needs_suffix_list + +# Suppress display of executed commands. +$(VERBOSE).SILENT: + +# A target that is always out of date. +cmake_force: +.PHONY : cmake_force + +#============================================================================= +# Set environment variables for the build. + +# The shell in which to execute make rules. +SHELL = /bin/sh + +# The CMake executable. +CMAKE_COMMAND = /usr/bin/cmake + +# The command to remove a file. +RM = /usr/bin/cmake -E remove -f + +# Escaping for special characters. +EQUALS = = + +# The top-level source directory on which CMake was run. +CMAKE_SOURCE_DIR = /home/manugupt1/Programming/sax3 + +# The top-level build directory on which CMake was run. +CMAKE_BINARY_DIR = /home/manugupt1/Programming/sax3 + +#============================================================================= +# Targets provided globally by CMake. + +# Special rule for the target edit_cache +edit_cache: + @$(CMAKE_COMMAND) -E cmake_echo_color --switch=$(COLOR) --cyan "Running CMake cache editor..." + /usr/bin/ccmake -H$(CMAKE_SOURCE_DIR) -B$(CMAKE_BINARY_DIR) +.PHONY : edit_cache + +# Special rule for the target edit_cache +edit_cache/fast: edit_cache +.PHONY : edit_cache/fast + +# Special rule for the target install +install: preinstall + @$(CMAKE_COMMAND) -E cmake_echo_color --switch=$(COLOR) --cyan "Install the project..." + /usr/bin/cmake -P cmake_install.cmake +.PHONY : install + +# Special rule for the target install +install/fast: preinstall/fast + @$(CMAKE_COMMAND) -E cmake_echo_color --switch=$(COLOR) --cyan "Install the project..." + /usr/bin/cmake -P cmake_install.cmake +.PHONY : install/fast + +# Special rule for the target install/local +install/local: preinstall + @$(CMAKE_COMMAND) -E cmake_echo_color --switch=$(COLOR) --cyan "Installing only the local directory..." + /usr/bin/cmake -DCMAKE_INSTALL_LOCAL_ONLY=1 -P cmake_install.cmake +.PHONY : install/local + +# Special rule for the target install/local +install/local/fast: install/local +.PHONY : install/local/fast + +# Special rule for the target install/strip +install/strip: preinstall + @$(CMAKE_COMMAND) -E cmake_echo_color --switch=$(COLOR) --cyan "Installing the project stripped..." + /usr/bin/cmake -DCMAKE_INSTALL_DO_STRIP=1 -P cmake_install.cmake +.PHONY : install/strip + +# Special rule for the target install/strip +install/strip/fast: install/strip +.PHONY : install/strip/fast + +# Special rule for the target list_install_components +list_install_components: + @$(CMAKE_COMMAND) -E cmake_echo_color --switch=$(COLOR) --cyan "Available install components are: \"Unspecified\"" +.PHONY : list_install_components + +# Special rule for the target list_install_components +list_install_components/fast: list_install_components +.PHONY : list_install_components/fast + +# Special rule for the target rebuild_cache +rebuild_cache: + @$(CMAKE_COMMAND) -E cmake_echo_color --switch=$(COLOR) --cyan "Running CMake to regenerate build system..." + /usr/bin/cmake -H$(CMAKE_SOURCE_DIR) -B$(CMAKE_BINARY_DIR) +.PHONY : rebuild_cache + +# Special rule for the target rebuild_cache +rebuild_cache/fast: rebuild_cache +.PHONY : rebuild_cache/fast + +# The main all target +all: cmake_check_build_system + cd /home/manugupt1/Programming/sax3 && $(CMAKE_COMMAND) -E cmake_progress_start /home/manugupt1/Programming/sax3/CMakeFiles /home/manugupt1/Programming/sax3/src/translation/CMakeFiles/progress.marks + cd /home/manugupt1/Programming/sax3 && $(MAKE) -f CMakeFiles/Makefile2 src/translation/all + $(CMAKE_COMMAND) -E cmake_progress_start /home/manugupt1/Programming/sax3/CMakeFiles 0 +.PHONY : all + +# The main clean target +clean: + cd /home/manugupt1/Programming/sax3 && $(MAKE) -f CMakeFiles/Makefile2 src/translation/clean +.PHONY : clean + +# The main clean target +clean/fast: clean +.PHONY : clean/fast + +# Prepare targets for installation. +preinstall: all + cd /home/manugupt1/Programming/sax3 && $(MAKE) -f CMakeFiles/Makefile2 src/translation/preinstall +.PHONY : preinstall + +# Prepare targets for installation. +preinstall/fast: + cd /home/manugupt1/Programming/sax3 && $(MAKE) -f CMakeFiles/Makefile2 src/translation/preinstall +.PHONY : preinstall/fast + +# clear depends +depend: + cd /home/manugupt1/Programming/sax3 && $(CMAKE_COMMAND) -H$(CMAKE_SOURCE_DIR) -B$(CMAKE_BINARY_DIR) --check-build-system CMakeFiles/Makefile.cmake 1 +.PHONY : depend + +# Help Target +help: + @echo "The following are some of the valid targets for this Makefile:" + @echo "... all (the default if no target is provided)" + @echo "... clean" + @echo "... depend" + @echo "... edit_cache" + @echo "... install" + @echo "... install/local" + @echo "... install/strip" + @echo "... list_install_components" + @echo "... rebuild_cache" +.PHONY : help + + + +#============================================================================= +# Special targets to cleanup operation of make. + +# Special rule to run CMake to check the build system integrity. +# No rule that depends on this can have commands that come from listfiles +# because they might be regenerated. +cmake_check_build_system: + cd /home/manugupt1/Programming/sax3 && $(CMAKE_COMMAND) -H$(CMAKE_SOURCE_DIR) -B$(CMAKE_BINARY_DIR) --check-build-system CMakeFiles/Makefile.cmake 0 +.PHONY : cmake_check_build_system + diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/sax3-0.1.1/src/translation/sax3-keyboard.po new/sax3-0.1.2/src/translation/sax3-keyboard.po --- old/sax3-0.1.1/src/translation/sax3-keyboard.po 1970-01-01 01:00:00.000000000 +0100 +++ new/sax3-0.1.2/src/translation/sax3-keyboard.po 2014-05-05 17:54:07.000000000 +0200 @@ -0,0 +1,74 @@ +# SOME DESCRIPTIVE TITLE. +# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER +# This file is distributed under the same license as the PACKAGE package. +# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR. +# +#, fuzzy +msgid "" +msgstr "" +"Project-Id-Version: PACKAGE VERSION\n" +"Report-Msgid-Bugs-To: \n" +"POT-Creation-Date: 2014-05-04 17:29+0530\n" +"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" +"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n" +"Language-Team: LANGUAGE <LL@li.org>\n" +"Language: \n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=CHARSET\n" +"Content-Transfer-Encoding: 8bit\n" + +#: keyboard.cxx:155 keyboard.cxx:190 +msgid "&Cancel" +msgstr "" + +#: keyboard.cxx:173 +msgid "&Down" +msgstr "" + +#: keyboard.cxx:154 keyboard.cxx:189 +msgid "&Ok" +msgstr "" + +#: keyboard.cxx:188 +msgid "&Simple Mode" +msgstr "" + +#: keyboard.cxx:172 +msgid "&Up" +msgstr "" + +#: keyboard.cxx:168 keyboard.cxx:183 +msgid "Add" +msgstr "" + +#: keyboard.cxx:179 +msgid "Category" +msgstr "" + +#: keyboard.cxx:186 +msgid "Delete Selected Group" +msgstr "" + +#: keyboard.cxx:174 +msgid "Delete selected Layout & Variant" +msgstr "" + +#: keyboard.cxx:153 +msgid "E&xpert Mode" +msgstr "" + +#: keyboard.cxx:181 +msgid "Relevant Options" +msgstr "" + +#: keyboard.cxx:166 +msgid "Select Layout Variant" +msgstr "" + +#: keyboard.cxx:175 +msgid "Select your Model" +msgstr "" + +#: keyboard.cxx:150 keyboard.cxx:164 +msgid "Select your keyboard Layout" +msgstr "" diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/sax3-0.1.1/src/translation/sax3-monitor.po new/sax3-0.1.2/src/translation/sax3-monitor.po --- old/sax3-0.1.1/src/translation/sax3-monitor.po 1970-01-01 01:00:00.000000000 +0100 +++ new/sax3-0.1.2/src/translation/sax3-monitor.po 2014-05-05 17:54:07.000000000 +0200 @@ -0,0 +1,74 @@ +# SOME DESCRIPTIVE TITLE. +# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER +# This file is distributed under the same license as the PACKAGE package. +# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR. +# +#, fuzzy +msgid "" +msgstr "" +"Project-Id-Version: PACKAGE VERSION\n" +"Report-Msgid-Bugs-To: \n" +"POT-Creation-Date: 2014-05-04 17:42+0530\n" +"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" +"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n" +"Language-Team: LANGUAGE <LL@li.org>\n" +"Language: \n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=CHARSET\n" +"Content-Transfer-Encoding: 8bit\n" + +#: monitors.cxx:218 +msgid "Cancel" +msgstr "" + +#: monitors.cxx:193 +msgid "Depth" +msgstr "" + +#: monitors.cxx:195 +msgid "Enable Advanced Settings" +msgstr "" + +#: monitors.cxx:200 +msgid "Horizontal Sync Rate(max value)" +msgstr "" + +#: monitors.cxx:198 +msgid "Horizontal Sync Rate(min value)" +msgstr "" + +#: monitors.cxx:208 +msgid "I want my own CVT" +msgstr "" + +#: monitors.cxx:217 +msgid "Ok" +msgstr "" + +#: monitors.cxx:214 +msgid "Refresh Rate" +msgstr "" + +#: monitors.cxx:191 +msgid "Select resolution" +msgstr "" + +#: monitors.cxx:187 +msgid "Select the driver" +msgstr "" + +#: monitors.cxx:205 +msgid "Vertical Refresh Rate(max value)" +msgstr "" + +#: monitors.cxx:203 +msgid "Vertical Refresh Rate(min value)" +msgstr "" + +#: monitors.cxx:210 +msgid "X Axis" +msgstr "" + +#: monitors.cxx:212 +msgid "Y Axis" +msgstr "" diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/sax3-0.1.1/src/translation/sax3-mouse.po new/sax3-0.1.2/src/translation/sax3-mouse.po --- old/sax3-0.1.1/src/translation/sax3-mouse.po 1970-01-01 01:00:00.000000000 +0100 +++ new/sax3-0.1.2/src/translation/sax3-mouse.po 2014-05-05 17:54:07.000000000 +0200 @@ -0,0 +1,74 @@ +# SOME DESCRIPTIVE TITLE. +# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER +# This file is distributed under the same license as the PACKAGE package. +# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR. +# +#, fuzzy +msgid "" +msgstr "" +"Project-Id-Version: PACKAGE VERSION\n" +"Report-Msgid-Bugs-To: \n" +"POT-Creation-Date: 2014-05-04 17:42+0530\n" +"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" +"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n" +"Language-Team: LANGUAGE <LL@li.org>\n" +"Language: \n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=CHARSET\n" +"Content-Transfer-Encoding: 8bit\n" + +#: mouse.cxx:320 +msgid "3 Button Timeout" +msgstr "" + +#: mouse.cxx:314 +msgid "3 button Emulation Options" +msgstr "" + +#: mouse.cxx:333 +msgid "Angle Offset in degrees" +msgstr "" + +#: mouse.cxx:312 +msgid "Auto Detected Mouse" +msgstr "" + +#: mouse.cxx:336 +msgid "Close" +msgstr "" + +#: mouse.cxx:316 +msgid "Enable 3 Buttons" +msgstr "" + +#: mouse.cxx:324 +msgid "Enable Wheel Emulation" +msgstr "" + +#: mouse.cxx:330 +msgid "Invert X Axis" +msgstr "" + +#: mouse.cxx:331 +msgid "Invert Y Axis" +msgstr "" + +#: mouse.cxx:319 mouse.cxx:327 +msgid "No" +msgstr "" + +#: mouse.cxx:335 +msgid "Save" +msgstr "" + +#: mouse.cxx:328 +msgid "Wheel Button Timeout" +msgstr "" + +#: mouse.cxx:322 +msgid "Wheel Emulation Options" +msgstr "" + +#: mouse.cxx:318 mouse.cxx:326 +msgid "Yes" +msgstr "" diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/sax3-0.1.1/src/translation/sax3-touchpad.po new/sax3-0.1.2/src/translation/sax3-touchpad.po --- old/sax3-0.1.1/src/translation/sax3-touchpad.po 1970-01-01 01:00:00.000000000 +0100 +++ new/sax3-0.1.2/src/translation/sax3-touchpad.po 2014-05-05 17:54:07.000000000 +0200 @@ -0,0 +1,98 @@ +# SOME DESCRIPTIVE TITLE. +# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER +# This file is distributed under the same license as the PACKAGE package. +# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR. +# +#, fuzzy +msgid "" +msgstr "" +"Project-Id-Version: PACKAGE VERSION\n" +"Report-Msgid-Bugs-To: \n" +"POT-Creation-Date: 2014-05-04 17:42+0530\n" +"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" +"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n" +"Language-Team: LANGUAGE <LL@li.org>\n" +"Language: \n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=CHARSET\n" +"Content-Transfer-Encoding: 8bit\n" + +#: touchpad.cxx:91 +msgid "Bottom Edge" +msgstr "" + +#: touchpad.cxx:92 +msgid "Bottom Left Corner" +msgstr "" + +#: touchpad.cxx:90 +msgid "Bottom Right Corner" +msgstr "" + +#: touchpad.cxx:98 +msgid "Cancel" +msgstr "" + +#: touchpad.cxx:86 +msgid "Circular Scrolling Location" +msgstr "" + +#: touchpad.cxx:58 +msgid "Emulate Mouse Button 1" +msgstr "" + +#: touchpad.cxx:66 +msgid "Emulate Mouse Button 2" +msgstr "" + +#: touchpad.cxx:74 +msgid "Emulate Mouse Button 3" +msgstr "" + +#: touchpad.cxx:84 +msgid "Enable 2 finger Horizontal Scroll" +msgstr "" + +#: touchpad.cxx:83 +msgid "Enable 2 finger Vertical Scroll" +msgstr "" + +#: touchpad.cxx:85 +msgid "Enable Circular Scrolling" +msgstr "" + +#: touchpad.cxx:81 +msgid "Enable Vertical Edge Scrolling" +msgstr "" + +#: touchpad.cxx:82 +msgid "Enable horizontal Edge Scrolling" +msgstr "" + +#: touchpad.cxx:93 +msgid "Left Edges" +msgstr "" + +#: touchpad.cxx:59 touchpad.cxx:67 touchpad.cxx:75 +msgid "No Of Clicks" +msgstr "" + +#: touchpad.cxx:97 +msgid "Ok" +msgstr "" + +#: touchpad.cxx:89 +msgid "Right Edge " +msgstr "" + +#: touchpad.cxx:87 +msgid "Top Edges" +msgstr "" + +#: touchpad.cxx:94 +msgid "Top Left Corner" +msgstr "" + +#: touchpad.cxx:88 +msgid "Top Right Corner" +msgstr "" -- To unsubscribe, e-mail: opensuse-commit+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-commit+help@opensuse.org