Hello community, here is the log from the commit of package xcb-util-cursor for openSUSE:Factory checked in at 2015-03-30 19:34:11 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/xcb-util-cursor (Old) and /work/SRC/openSUSE:Factory/.xcb-util-cursor.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "xcb-util-cursor" Changes: -------- --- /work/SRC/openSUSE:Factory/xcb-util-cursor/xcb-util-cursor.changes 2014-02-07 13:49:19.000000000 +0100 +++ /work/SRC/openSUSE:Factory/.xcb-util-cursor.new/xcb-util-cursor.changes 2015-03-30 19:34:13.000000000 +0200 @@ -1,0 +2,15 @@ +Mon Mar 30 09:32:56 UTC 2015 - sndirsch@suse.com + +- added baselibs.conf as source to specfile + +------------------------------------------------------------------- +Fri Mar 27 14:51:02 UTC 2015 - hrvoje.senjan@gmail.com + +- Update to version 0.1.2: + + Use CFSwapInt32LittleToHost from CoreFoundation.h on Mac OS X + to implement le32toh. + + Check submodules before running autoconf. + + darwin: Use OSByteOrder.h rather than CF. + + Perform safety check before trying to load glyph cursor + +------------------------------------------------------------------- Old: ---- xcb-util-cursor-0.1.1.tar.bz2 New: ---- xcb-util-cursor-0.1.2.tar.bz2 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ xcb-util-cursor.spec ++++++ --- /var/tmp/diff_new_pack.7F1ZNK/_old 2015-03-30 19:34:13.000000000 +0200 +++ /var/tmp/diff_new_pack.7F1ZNK/_new 2015-03-30 19:34:13.000000000 +0200 @@ -1,7 +1,7 @@ # -# spec file for package xcb-util-renderutil +# spec file for package xcb-util-cursor # -# Copyright (c) 2013 SUSE LINUX Products GmbH, Nuernberg, Germany. +# Copyright (c) 2015 SUSE LINUX GmbH, Nuernberg, Germany. # # All modifications and additions to the file contributed by third parties # remain the property of their copyright owners, unless otherwise agreed @@ -18,7 +18,7 @@ Name: xcb-util-cursor %define lname libxcb-cursor0 -Version: 0.1.1 +Version: 0.1.2 Release: 0 Summary: XCB cursor library (libxcursor port) License: MIT @@ -28,18 +28,19 @@ #Git-Clone: git://anongit.freedesktop.org/xcb/util-cursor #Git-Web: http://cgit.freedesktop.org/xcb/util-cursor/ Source: http://xcb.freedesktop.org/dist/%name-%version.tar.bz2 +Source1: baselibs.conf Patch11: u_fix-issue-with-gcc.patch BuildRoot: %{_tmppath}/%{name}-%{version}-build BuildRequires: autoconf BuildRequires: automake -BuildRequires: libtool BuildRequires: gperf +BuildRequires: libtool BuildRequires: pkgconfig BuildRequires: pkgconfig(xcb) >= 1.4 +BuildRequires: pkgconfig(xcb-image) BuildRequires: pkgconfig(xcb-proto) >= 1.6 BuildRequires: pkgconfig(xcb-render) BuildRequires: pkgconfig(xcb-renderutil) -BuildRequires: pkgconfig(xcb-image) BuildRequires: pkgconfig(xorg-macros) >= 1.6.0 %description ++++++ xcb-util-cursor-0.1.1.tar.bz2 -> xcb-util-cursor-0.1.2.tar.bz2 ++++++ ++++ 7581 lines of diff (skipped) ++++ retrying with extended exclude list diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xcb-util-cursor-0.1.1/ChangeLog new/xcb-util-cursor-0.1.2/ChangeLog --- old/xcb-util-cursor-0.1.1/ChangeLog 2013-11-12 21:59:38.000000000 +0100 +++ new/xcb-util-cursor-0.1.2/ChangeLog 2015-03-25 23:08:32.000000000 +0100 @@ -1,3 +1,51 @@ +commit 8eb844d39a06f42019dede515c70e7a0b155357d +Author: Michael Stapelberg <michael@stapelberg.de> +Date: Wed Mar 25 23:06:23 2015 +0100 + + set version to 0.1.2 + +commit cf26479ece9ab9e04616bc10ba674d88a284e5b0 +Author: Martin Gräßlin <mgraesslin@kde.org> +Date: Tue Mar 17 18:41:07 2015 +0100 + + Perform safety check before trying to load glyph cursor + + The passed in cursor name to xcb_cursor_load_cursor might not match + one of the predefined font cursor values. Without the check the + call to create glyph cursor will fail with a BadValue error, but + the library returns the id allocated for the xcb_cursor_t. A user + of the library gets a value which looks like a valid cursor, but + when using it for e.g. a cursor value in xcb_create_window it raises + a BadCursor error. + +commit f03cc278c6cce0cf721adf9c3764d3c5fba63392 +Author: Jeremy Huddleston Sequoia <jeremyhu@apple.com> +Date: Sat Apr 5 15:50:28 2014 -0700 + + darwin: Use OSByteOrder.h rather than CF. + + Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com> + +commit a08bbf0e20995d29cbf890957c898059d4a9ece2 +Author: Niclas Zeising <zeising@daemonic.se> +Date: Mon Aug 12 13:53:10 2013 +0200 + + Check submodules before running autoconf. + + Exit early with an informative message if the submodules are missing, + since they are needed. Without this autoconf throws a bunch of + uninformative errors which does not point to the actual problem. + This was taken from util-keysyms. + + Signed-off-by: Niclas Zeising <zeising@daemonic.se> + Reviewed-By: Arnaud Fontaine <arnau@debian.org> + +commit d25806902ee6050ec3d52480d0bc8f4889942350 +Author: Marcus Crestani <crestani@informatik.uni-tuebingen.de> +Date: Mon Dec 23 23:30:04 2013 +0100 + + Use CFSwapInt32LittleToHost from CoreFoundation.h on Mac OS X to implement le32toh. + commit f557760c56ba4eb44063936d8fa49473532e21c6 Author: Michael Stapelberg <michael@stapelberg.de> Date: Tue Nov 12 21:47:50 2013 +0100 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xcb-util-cursor-0.1.1/INSTALL new/xcb-util-cursor-0.1.2/INSTALL --- old/xcb-util-cursor-0.1.1/INSTALL 2013-11-12 21:59:38.000000000 +0100 +++ new/xcb-util-cursor-0.1.2/INSTALL 2015-03-25 23:08:32.000000000 +0100 @@ -1,11 +1,13 @@ Installation Instructions ************************* -Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005, -2006, 2007, 2008 Free Software Foundation, Inc. +Copyright (C) 1994-1996, 1999-2002, 2004-2011 Free Software Foundation, +Inc. - This file is free documentation; the Free Software Foundation gives -unlimited permission to copy, distribute and modify it. + Copying and distribution of this file, with or without modification, +are permitted in any medium without royalty provided the copyright +notice and this notice are preserved. This file is offered as-is, +without warranty of any kind. Basic Installation ================== @@ -13,7 +15,11 @@ Briefly, the shell commands `./configure; make; make install' should configure, build, and install this package. The following more-detailed instructions are generic; see the `README' file for -instructions specific to this package. +instructions specific to this package. Some packages provide this +`INSTALL' file but do not implement all of the features documented +below. The lack of an optional feature in a given package is not +necessarily a bug. More recommendations for GNU packages can be found +in *note Makefile Conventions: (standards)Makefile Conventions. The `configure' shell script attempts to guess correct values for various system-dependent variables used during compilation. It uses @@ -42,7 +48,7 @@ you want to change it or regenerate `configure' using a newer version of `autoconf'. -The simplest way to compile this package is: + The simplest way to compile this package is: 1. `cd' to the directory containing the package's source code and type `./configure' to configure the package for your system. @@ -53,12 +59,22 @@ 2. Type `make' to compile the package. 3. Optionally, type `make check' to run any self-tests that come with - the package. + the package, generally using the just-built uninstalled binaries. 4. Type `make install' to install the programs and any data files and - documentation. + documentation. When installing into a prefix owned by root, it is + recommended that the package be configured and built as a regular + user, and only the `make install' phase executed with root + privileges. + + 5. Optionally, type `make installcheck' to repeat any self-tests, but + this time using the binaries in their final installed location. + This target does not install anything. Running this target as a + regular user, particularly if the prior `make install' required + root privileges, verifies that the installation completed + correctly. - 5. You can remove the program binaries and object files from the + 6. You can remove the program binaries and object files from the source code directory by typing `make clean'. To also remove the files that `configure' created (so you can compile the package for a different kind of computer), type `make distclean'. There is @@ -67,8 +83,15 @@ all sorts of other programs in order to regenerate files that came with the distribution. - 6. Often, you can also type `make uninstall' to remove the installed - files again. + 7. Often, you can also type `make uninstall' to remove the installed + files again. In practice, not all packages have tested that + uninstallation works correctly, even though it is required by the + GNU Coding Standards. + + 8. Some packages, particularly those that use Automake, provide `make + distcheck', which can by used by developers to test that all other + targets like `make install' and `make uninstall' work correctly. + This target is generally not run by end users. Compilers and Options ===================== @@ -93,7 +116,8 @@ own directory. To do this, you can use GNU `make'. `cd' to the directory where you want the object files and executables to go and run the `configure' script. `configure' automatically checks for the -source code in the directory that `configure' is in and in `..'. +source code in the directory that `configure' is in and in `..'. This +is known as a "VPATH" build. With a non-GNU `make', it is safer to compile the package for one architecture at a time in the source code directory. After you have @@ -120,7 +144,8 @@ By default, `make install' installs the package's commands under `/usr/local/bin', include files under `/usr/local/include', etc. You can specify an installation prefix other than `/usr/local' by giving -`configure' the option `--prefix=PREFIX'. +`configure' the option `--prefix=PREFIX', where PREFIX must be an +absolute file name. You can specify separate installation prefixes for architecture-specific files and architecture-independent files. If you @@ -131,15 +156,46 @@ In addition, if you use an unusual directory layout you can give options like `--bindir=DIR' to specify different values for particular kinds of files. Run `configure --help' for a list of the directories -you can set and what kinds of files go in them. +you can set and what kinds of files go in them. In general, the +default for these options is expressed in terms of `${prefix}', so that +specifying just `--prefix' will affect all of the other directory +specifications that were not explicitly provided. + + The most portable way to affect installation locations is to pass the +correct locations to `configure'; however, many packages provide one or +both of the following shortcuts of passing variable assignments to the +`make install' command line to change installation locations without +having to reconfigure or recompile. + + The first method involves providing an override variable for each +affected directory. For example, `make install +prefix=/alternate/directory' will choose an alternate location for all +directory configuration variables that were expressed in terms of +`${prefix}'. Any directories that were specified during `configure', +but not in terms of `${prefix}', must each be overridden at install +time for the entire installation to be relocated. The approach of +makefile variable overrides for each directory variable is required by +the GNU Coding Standards, and ideally causes no recompilation. +However, some platforms have known limitations with the semantics of +shared libraries that end up requiring recompilation when using this +method, particularly noticeable in packages that use GNU Libtool. + + The second method involves providing the `DESTDIR' variable. For +example, `make install DESTDIR=/alternate/directory' will prepend +`/alternate/directory' before all installation names. The approach of +`DESTDIR' overrides is not required by the GNU Coding Standards, and +does not work on platforms that have drive letters. On the other hand, +it does better at avoiding recompilation issues, and works well even +when some directory options were not specified in terms of `${prefix}' +at `configure' time. + +Optional Features +================= If the package supports it, you can cause programs to be installed with an extra prefix or suffix on their names by giving `configure' the option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. -Optional Features -================= - Some packages pay attention to `--enable-FEATURE' options to `configure', where FEATURE indicates an optional part of the package. They may also pay attention to `--with-PACKAGE' options, where PACKAGE @@ -152,6 +208,13 @@ you can use the `configure' options `--x-includes=DIR' and `--x-libraries=DIR' to specify their locations. + Some packages offer the ability to configure how verbose the +execution of `make' will be. For these packages, running `./configure +--enable-silent-rules' sets the default to minimal output, which can be +overridden with `make V=1'; while running `./configure +--disable-silent-rules' sets the default to verbose, which can be +overridden with `make V=0'. + Particular systems ================== @@ -159,10 +222,15 @@ CC is not installed, it is recommended to use the following options in order to use an ANSI C compiler: - ./configure CC="cc -Ae" + ./configure CC="cc -Ae -D_XOPEN_SOURCE=500" and if that doesn't work, install pre-built binaries of GCC for HP-UX. + HP-UX `make' updates targets which have the same time stamps as +their prerequisites, which makes it generally unusable when shipped +generated files such as `configure' are involved. Use GNU `make' +instead. + On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot parse its `<wchar.h>' header file. The option `-nodtk' can be used as a workaround. If GNU CC is not installed, it is therefore recommended @@ -174,6 +242,16 @@ ./configure CC="cc -nodtk" + On Solaris, don't put `/usr/ucb' early in your `PATH'. This +directory contains several dysfunctional programs; working variants of +these programs are available in `/usr/bin'. So, if you need `/usr/ucb' +in your `PATH', put it _after_ `/usr/bin'. + + On Haiku, software installed for all users goes in `/boot/common', +not `/usr/local'. It is recommended to use the following options: + + ./configure --prefix=/boot/common + Specifying the System Type ========================== @@ -189,7 +267,8 @@ where SYSTEM can have one of these forms: - OS KERNEL-OS + OS + KERNEL-OS See the file `config.sub' for the possible values of each field. If `config.sub' isn't included in this package, then this package doesn't @@ -277,7 +356,7 @@ `configure' can determine that directory automatically. `--prefix=DIR' - Use DIR as the installation prefix. *Note Installation Names:: + Use DIR as the installation prefix. *note Installation Names:: for more details, including other options available for fine-tuning the installation locations. diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xcb-util-cursor-0.1.1/NEWS new/xcb-util-cursor-0.1.2/NEWS --- old/xcb-util-cursor-0.1.1/NEWS 2013-11-12 21:47:34.000000000 +0100 +++ new/xcb-util-cursor-0.1.2/NEWS 2015-03-25 23:06:10.000000000 +0100 @@ -1,3 +1,12 @@ +Release 0.1.2 (2015-03-35) +=========================== + +- Use CFSwapInt32LittleToHost from CoreFoundation.h on Mac OS X to implement + le32toh. +- Check submodules before running autoconf. +- darwin: Use OSByteOrder.h rather than CF. +- Perform safety check before trying to load glyph cursorHEADmaster + Release 0.1.1 (2013-11-12) =========================== diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xcb-util-cursor-0.1.1/autogen.sh new/xcb-util-cursor-0.1.2/autogen.sh --- old/xcb-util-cursor-0.1.1/autogen.sh 2013-01-05 16:45:49.000000000 +0100 +++ new/xcb-util-cursor-0.1.2/autogen.sh 2015-03-25 23:03:22.000000000 +0100 @@ -6,6 +6,21 @@ ORIGDIR=`pwd` cd $srcdir +# If this is a git checkout, verify that the submodules are initialized, +# otherwise autotools will just fail with an unhelpful error message. +if [ -d ".git" ] && [ -r ".gitmodules" ] +then + # If git is not in PATH, this will not return 0, thus not keeping us + # from building. Since the message is worthless when git is not + # installed, this is what we want. + if git submodule status 2>/dev/null | grep -q '^-' + then + echo "You have uninitialized git submodules." >&2 + echo "Please run: git submodule update --init" >&2 + exit 1 + fi +fi + autoreconf -v --install || exit 1 cd $ORIGDIR || exit $? diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xcb-util-cursor-0.1.1/compile new/xcb-util-cursor-0.1.2/compile --- old/xcb-util-cursor-0.1.1/compile 1970-01-01 01:00:00.000000000 +0100 +++ new/xcb-util-cursor-0.1.2/compile 2015-03-25 23:04:34.000000000 +0100 @@ -0,0 +1,347 @@ +#! /bin/sh +# Wrapper for compilers which do not understand '-c -o'. + +scriptversion=2012-10-14.11; # UTC + +# Copyright (C) 1999-2013 Free Software Foundation, Inc. +# Written by Tom Tromey <tromey@cygnus.com>. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# This file is maintained in Automake, please report +# bugs to <bug-automake@gnu.org> or send patches to +# <automake-patches@gnu.org>. + +nl=' +' + +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent tools from complaining about whitespace usage. +IFS=" "" $nl" + +file_conv= + +# func_file_conv build_file lazy +# Convert a $build file to $host form and store it in $file +# Currently only supports Windows hosts. If the determined conversion +# type is listed in (the comma separated) LAZY, no conversion will +# take place. +func_file_conv () +{ + file=$1 + case $file in + / | /[!/]*) # absolute file, and not a UNC file + if test -z "$file_conv"; then + # lazily determine how to convert abs files + case `uname -s` in + MINGW*) + file_conv=mingw + ;; + CYGWIN*) + file_conv=cygwin + ;; + *) + file_conv=wine + ;; + esac + fi + case $file_conv/,$2, in + *,$file_conv,*) + ;; + mingw/*) + file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'` + ;; + cygwin/*) + file=`cygpath -m "$file" || echo "$file"` + ;; + wine/*) + file=`winepath -w "$file" || echo "$file"` + ;; + esac + ;; + esac +} + +# func_cl_dashL linkdir +# Make cl look for libraries in LINKDIR +func_cl_dashL () +{ + func_file_conv "$1" + if test -z "$lib_path"; then + lib_path=$file + else + lib_path="$lib_path;$file" + fi + linker_opts="$linker_opts -LIBPATH:$file" +} + +# func_cl_dashl library +# Do a library search-path lookup for cl +func_cl_dashl () +{ + lib=$1 + found=no + save_IFS=$IFS + IFS=';' + for dir in $lib_path $LIB + do + IFS=$save_IFS + if $shared && test -f "$dir/$lib.dll.lib"; then + found=yes + lib=$dir/$lib.dll.lib + break + fi + if test -f "$dir/$lib.lib"; then + found=yes + lib=$dir/$lib.lib + break + fi + if test -f "$dir/lib$lib.a"; then + found=yes + lib=$dir/lib$lib.a + break + fi + done + IFS=$save_IFS + + if test "$found" != yes; then + lib=$lib.lib + fi +} + +# func_cl_wrapper cl arg... +# Adjust compile command to suit cl +func_cl_wrapper () +{ + # Assume a capable shell + lib_path= + shared=: + linker_opts= + for arg + do + if test -n "$eat"; then + eat= + else + case $1 in + -o) + # configure might choose to run compile as 'compile cc -o foo foo.c'. + eat=1 + case $2 in + *.o | *.[oO][bB][jJ]) + func_file_conv "$2" + set x "$@" -Fo"$file" + shift + ;; + *) + func_file_conv "$2" + set x "$@" -Fe"$file" + shift + ;; + esac + ;; + -I) + eat=1 + func_file_conv "$2" mingw + set x "$@" -I"$file" + shift + ;; + -I*) + func_file_conv "${1#-I}" mingw + set x "$@" -I"$file" + shift + ;; + -l) + eat=1 + func_cl_dashl "$2" + set x "$@" "$lib" + shift + ;; + -l*) + func_cl_dashl "${1#-l}" + set x "$@" "$lib" + shift + ;; + -L) + eat=1 + func_cl_dashL "$2" + ;; + -L*) + func_cl_dashL "${1#-L}" + ;; + -static) + shared=false + ;; + -Wl,*) + arg=${1#-Wl,} + save_ifs="$IFS"; IFS=',' + for flag in $arg; do + IFS="$save_ifs" + linker_opts="$linker_opts $flag" + done + IFS="$save_ifs" + ;; + -Xlinker) + eat=1 + linker_opts="$linker_opts $2" + ;; + -*) + set x "$@" "$1" + shift + ;; + *.cc | *.CC | *.cxx | *.CXX | *.[cC]++) + func_file_conv "$1" + set x "$@" -Tp"$file" + shift + ;; + *.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO]) + func_file_conv "$1" mingw + set x "$@" "$file" + shift + ;; + *) + set x "$@" "$1" + shift + ;; + esac + fi + shift + done + if test -n "$linker_opts"; then + linker_opts="-link$linker_opts" + fi + exec "$@" $linker_opts + exit 1 +} + +eat= + +case $1 in + '') + echo "$0: No command. Try '$0 --help' for more information." 1>&2 + exit 1; + ;; + -h | --h*) + cat <<\EOF +Usage: compile [--help] [--version] PROGRAM [ARGS] + +Wrapper for compilers which do not understand '-c -o'. +Remove '-o dest.o' from ARGS, run PROGRAM with the remaining +arguments, and rename the output as expected. + +If you are trying to build a whole package this is not the +right script to run: please start by reading the file 'INSTALL'. + +Report bugs to <bug-automake@gnu.org>. +EOF + exit $? + ;; + -v | --v*) + echo "compile $scriptversion" + exit $? + ;; + cl | *[/\\]cl | cl.exe | *[/\\]cl.exe ) + func_cl_wrapper "$@" # Doesn't return... + ;; +esac + +ofile= +cfile= + +for arg +do + if test -n "$eat"; then + eat= + else + case $1 in + -o) + # configure might choose to run compile as 'compile cc -o foo foo.c'. + # So we strip '-o arg' only if arg is an object. + eat=1 + case $2 in + *.o | *.obj) + ofile=$2 + ;; + *) + set x "$@" -o "$2" + shift + ;; + esac + ;; + *.c) + cfile=$1 + set x "$@" "$1" + shift + ;; + *) + set x "$@" "$1" + shift + ;; + esac + fi + shift +done + +if test -z "$ofile" || test -z "$cfile"; then + # If no '-o' option was seen then we might have been invoked from a + # pattern rule where we don't need one. That is ok -- this is a + # normal compilation that the losing compiler can handle. If no + # '.c' file was seen then we are probably linking. That is also + # ok. + exec "$@" +fi + +# Name of file we expect compiler to create. +cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'` + +# Create the lock directory. +# Note: use '[/\\:.-]' here to ensure that we don't use the same name +# that we are using for the .o file. Also, base the name on the expected +# object file name, since that is what matters with a parallel build. +lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d +while true; do + if mkdir "$lockdir" >/dev/null 2>&1; then + break + fi + sleep 1 +done +# FIXME: race condition here if user kills between mkdir and trap. +trap "rmdir '$lockdir'; exit 1" 1 2 15 + +# Run the compile. +"$@" +ret=$? + +if test -f "$cofile"; then + test "$cofile" = "$ofile" || mv "$cofile" "$ofile" +elif test -f "${cofile}bj"; then + test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile" +fi + +rmdir "$lockdir" +exit $ret + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xcb-util-cursor-0.1.1/configure.ac new/xcb-util-cursor-0.1.2/configure.ac --- old/xcb-util-cursor-0.1.1/configure.ac 2013-11-12 21:47:47.000000000 +0100 +++ new/xcb-util-cursor-0.1.2/configure.ac 2015-03-25 23:06:21.000000000 +0100 @@ -1,6 +1,6 @@ dnl XCB_UTIL_M4_WITH_INCLUDE_PATH requires Autoconf >= 2.62 AC_PREREQ(2.62) -AC_INIT([xcb-util-cursor],0.1.1,[xcb@lists.freedesktop.org]) +AC_INIT([xcb-util-cursor],0.1.2,[xcb@lists.freedesktop.org]) AC_CONFIG_SRCDIR([Makefile.am]) AC_CONFIG_MACRO_DIR([m4]) @@ -19,7 +19,7 @@ AM_MISSING_PROG([GPERF], [gperf]) -AC_CHECK_HEADERS([endian.h sys/endian.h sys/byteorder.h], [break]) +AC_CHECK_HEADERS([endian.h sys/endian.h sys/byteorder.h libkern/OSByteOrder.h], [break]) AC_CHECK_FUNCS([le32toh]) PKG_CHECK_MODULES(XCB_RENDER, xcb-render) diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xcb-util-cursor-0.1.1/cursor/load_cursor.c new/xcb-util-cursor-0.1.2/cursor/load_cursor.c --- old/xcb-util-cursor-0.1.1/cursor/load_cursor.c 2013-09-20 06:19:58.000000000 +0200 +++ new/xcb-util-cursor-0.1.2/cursor/load_cursor.c 2015-03-25 23:03:22.000000000 +0100 @@ -207,6 +207,8 @@ if (fd == -1 || core_char > -1) { if (core_char == -1) core_char = cursor_shape_to_id(name); + if (core_char == -1) + return XCB_NONE; cid = xcb_generate_id(c->conn); xcb_create_glyph_cursor(c->conn, cid, c->cursor_font, c->cursor_font, core_char, core_char + 1, 0, 0, 0, 65535, 65535, 65535); diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xcb-util-cursor-0.1.1/cursor/parse_cursor_file.c new/xcb-util-cursor-0.1.2/cursor/parse_cursor_file.c --- old/xcb-util-cursor-0.1.1/cursor/parse_cursor_file.c 2013-11-09 11:15:12.000000000 +0100 +++ new/xcb-util-cursor-0.1.2/cursor/parse_cursor_file.c 2015-03-25 23:03:22.000000000 +0100 @@ -48,6 +48,9 @@ # ifndef HAVE_LE32TOH # define le32toh(x) LE_32(x) # endif +#elif defined(HAVE_LIBKERN_OSBYTEORDER_H) +#include <libkern/OSByteOrder.h> +#define le32toh(x) OSSwapLittleToHostInt32(x) #endif #include <xcb/xcb.h> diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xcb-util-cursor-0.1.1/cursor/shape_to_id.c new/xcb-util-cursor-0.1.2/cursor/shape_to_id.c --- old/xcb-util-cursor-0.1.1/cursor/shape_to_id.c 2013-11-12 21:48:44.000000000 +0100 +++ new/xcb-util-cursor-0.1.2/cursor/shape_to_id.c 2015-03-25 23:04:46.000000000 +0100 @@ -1,4 +1,4 @@ -/* ANSI-C code produced by gperf version 3.0.3 */ +/* ANSI-C code produced by gperf version 3.0.4 */ /* Command-line: gperf --includes --struct-type --language=ANSI-C --switch=1 shape_to_id.gperf */ /* Computed positions: -k'1-2,4,$' */ @@ -100,7 +100,7 @@ #ifdef __GNUC__ __inline -#ifdef __GNUC_STDC_INLINE__ +#if defined __GNUC_STDC_INLINE__ || defined __GNUC_GNU_INLINE__ __attribute__ ((__gnu_inline__)) #endif #endif diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xcb-util-cursor-0.1.1/m4/libtool.m4 new/xcb-util-cursor-0.1.2/m4/libtool.m4 --- old/xcb-util-cursor-0.1.1/m4/libtool.m4 2013-07-13 08:19:39.000000000 +0200 +++ new/xcb-util-cursor-0.1.2/m4/libtool.m4 2015-03-25 23:04:31.000000000 +0100 @@ -1312,7 +1312,7 @@ rm -rf conftest* ;; -x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ +x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \ s390*-*linux*|s390*-*tpf*|sparc*-*linux*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext @@ -1326,7 +1326,10 @@ x86_64-*linux*) LD="${LD-ld} -m elf_i386" ;; - ppc64-*linux*|powerpc64-*linux*) + powerpc64le-*linux*) + LD="${LD-ld} -m elf32lppclinux" + ;; + powerpc64-*linux*) LD="${LD-ld} -m elf32ppclinux" ;; s390x-*linux*) @@ -1345,7 +1348,10 @@ x86_64-*linux*) LD="${LD-ld} -m elf_x86_64" ;; - ppc*-*linux*|powerpc*-*linux*) + powerpcle-*linux*) + LD="${LD-ld} -m elf64lppc" + ;; + powerpc-*linux*) LD="${LD-ld} -m elf64ppc" ;; s390*-*linux*|s390*-*tpf*) @@ -2512,6 +2518,17 @@ esac ;; +gnu*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + haiku*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no @@ -2628,7 +2645,7 @@ ;; # This must be glibc/ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) +linux* | k*bsd*-gnu | kopensolaris*-gnu) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no @@ -2658,10 +2675,14 @@ # before this can be enabled. hardcode_into_libs=yes + # Add ABI-specific directories to the system library path. + sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /lib /usr/lib" + # Append ld.so.conf contents to the search path if test -f /etc/ld.so.conf; then lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` - sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra" + fi # We used to test for /lib/ld.so.1 and disable shared libraries on @@ -2673,18 +2694,6 @@ dynamic_linker='GNU/Linux ld.so' ;; -netbsdelf*-gnu) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='NetBSD ld.elf_so' - ;; - netbsd*) version_type=sunos need_lib_prefix=no @@ -3244,6 +3253,10 @@ fi ;; +gnu*) + lt_cv_deplibs_check_method=pass_all + ;; + haiku*) lt_cv_deplibs_check_method=pass_all ;; @@ -3282,11 +3295,11 @@ ;; # This must be glibc/ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) +linux* | k*bsd*-gnu | kopensolaris*-gnu) lt_cv_deplibs_check_method=pass_all ;; -netbsd* | netbsdelf*-gnu) +netbsd*) if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' else @@ -4034,7 +4047,7 @@ ;; esac ;; - linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) + linux* | k*bsd*-gnu | kopensolaris*-gnu) case $cc_basename in KCC*) # KAI C++ Compiler @@ -4098,7 +4111,7 @@ ;; esac ;; - netbsd* | netbsdelf*-gnu) + netbsd*) ;; *qnx* | *nto*) # QNX uses GNU C++, but need to define -shared option too, otherwise @@ -4333,7 +4346,7 @@ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; - linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) + linux* | k*bsd*-gnu | kopensolaris*-gnu) case $cc_basename in # old Intel for x86_64 which still supported -KPIC. ecc*) @@ -4575,9 +4588,6 @@ ;; esac ;; - linux* | k*bsd*-gnu | gnu*) - _LT_TAGVAR(link_all_deplibs, $1)=no - ;; *) _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ;; @@ -4640,9 +4650,6 @@ openbsd*) with_gnu_ld=no ;; - linux* | k*bsd*-gnu | gnu*) - _LT_TAGVAR(link_all_deplibs, $1)=no - ;; esac _LT_TAGVAR(ld_shlibs, $1)=yes @@ -4864,7 +4871,7 @@ fi ;; - netbsd* | netbsdelf*-gnu) + netbsd*) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= @@ -5041,7 +5048,6 @@ if test "$aix_use_runtimelinking" = yes; then shared_flag="$shared_flag "'${wl}-G' fi - _LT_TAGVAR(link_all_deplibs, $1)=no else # not using gcc if test "$host_cpu" = ia64; then @@ -5346,7 +5352,7 @@ _LT_TAGVAR(link_all_deplibs, $1)=yes ;; - netbsd* | netbsdelf*-gnu) + netbsd*) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out else @@ -6226,6 +6232,9 @@ _LT_TAGVAR(ld_shlibs, $1)=yes ;; + gnu*) + ;; + haiku*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(link_all_deplibs, $1)=yes @@ -6387,7 +6396,7 @@ _LT_TAGVAR(inherit_rpath, $1)=yes ;; - linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) + linux* | k*bsd*-gnu | kopensolaris*-gnu) case $cc_basename in KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xcb-util-cursor-0.1.1/missing new/xcb-util-cursor-0.1.2/missing --- old/xcb-util-cursor-0.1.1/missing 2013-07-13 08:19:42.000000000 +0200 +++ new/xcb-util-cursor-0.1.2/missing 2015-03-25 23:04:34.000000000 +0100 @@ -1,11 +1,10 @@ #! /bin/sh -# Common stub for a few missing GNU programs while installing. +# Common wrapper for a few potentially missing GNU programs. -scriptversion=2012-01-06.13; # UTC +scriptversion=2013-10-28.13; # UTC -# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006, -# 2008, 2009, 2010, 2011, 2012 Free Software Foundation, Inc. -# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996. +# Copyright (C) 1996-2013 Free Software Foundation, Inc. +# Originally written by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -26,68 +25,40 @@ # the same distribution terms that you use for the rest of that program. if test $# -eq 0; then - echo 1>&2 "Try \`$0 --help' for more information" + echo 1>&2 "Try '$0 --help' for more information" exit 1 fi -run=: -sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p' -sed_minuso='s/.* -o \([^ ]*\).*/\1/p' - -# In the cases where this matters, `missing' is being run in the -# srcdir already. -if test -f configure.ac; then - configure_ac=configure.ac -else - configure_ac=configure.in -fi +case $1 in -msg="missing on your system" + --is-lightweight) + # Used by our autoconf macros to check whether the available missing + # script is modern enough. + exit 0 + ;; -case $1 in ---run) - # Try to run requested program, and just exit if it succeeds. - run= - shift - "$@" && exit 0 - # Exit code 63 means version mismatch. This often happens - # when the user try to use an ancient version of a tool on - # a file that requires a minimum version. In this case we - # we should proceed has if the program had been absent, or - # if --run hadn't been passed. - if test $? = 63; then - run=: - msg="probably too old" - fi - ;; + --run) + # Back-compat with the calling convention used by older automake. + shift + ;; -h|--h|--he|--hel|--help) echo "\ $0 [OPTION]... PROGRAM [ARGUMENT]... -Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an -error status if there is no known handling for PROGRAM. +Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due +to PROGRAM being missing or too old. Options: -h, --help display this help and exit -v, --version output version information and exit - --run try to run the given command, and emulate it if it fails Supported PROGRAM values: - aclocal touch file \`aclocal.m4' - autoconf touch file \`configure' - autoheader touch file \`config.h.in' - autom4te touch the output file, or create a stub one - automake touch all \`Makefile.in' files - bison create \`y.tab.[ch]', if possible, from existing .[ch] - flex create \`lex.yy.c', if possible, from existing .c - help2man touch the output file - lex create \`lex.yy.c', if possible, from existing .c - makeinfo touch the output file - yacc create \`y.tab.[ch]', if possible, from existing .[ch] + aclocal autoconf autoheader autom4te automake makeinfo + bison yacc flex lex help2man -Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and -\`g' are ignored when checking the name. +Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and +'g' are ignored when checking the name. Send bug reports to <bug-automake@gnu.org>." exit $? @@ -99,228 +70,141 @@ ;; -*) - echo 1>&2 "$0: Unknown \`$1' option" - echo 1>&2 "Try \`$0 --help' for more information" + echo 1>&2 "$0: unknown '$1' option" + echo 1>&2 "Try '$0 --help' for more information" exit 1 ;; esac -# normalize program name to check for. -program=`echo "$1" | sed ' - s/^gnu-//; t - s/^gnu//; t - s/^g//; t'` - -# Now exit if we have it, but it failed. Also exit now if we -# don't have it and --version was passed (most likely to detect -# the program). This is about non-GNU programs, so use $1 not -# $program. -case $1 in - lex*|yacc*) - # Not GNU programs, they don't have --version. - ;; +# Run the given program, remember its exit status. +"$@"; st=$? - *) - if test -z "$run" && ($1 --version) > /dev/null 2>&1; then - # We have it, but it failed. - exit 1 - elif test "x$2" = "x--version" || test "x$2" = "x--help"; then - # Could not run --version or --help. This is probably someone - # running `$TOOL --version' or `$TOOL --help' to check whether - # $TOOL exists and not knowing $TOOL uses missing. - exit 1 - fi - ;; -esac - -# If it does not exist, or fails to run (possibly an outdated version), -# try to emulate it. -case $program in - aclocal*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`acinclude.m4' or \`${configure_ac}'. You might want - to install the \`Automake' and \`Perl' packages. Grab them from - any GNU archive site." - touch aclocal.m4 - ;; - - autoconf*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`${configure_ac}'. You might want to install the - \`Autoconf' and \`GNU m4' packages. Grab them from any GNU - archive site." - touch configure - ;; - - autoheader*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`acconfig.h' or \`${configure_ac}'. You might want - to install the \`Autoconf' and \`GNU m4' packages. Grab them - from any GNU archive site." - files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` - test -z "$files" && files="config.h" - touch_files= - for f in $files; do - case $f in - *:*) touch_files="$touch_files "`echo "$f" | - sed -e 's/^[^:]*://' -e 's/:.*//'`;; - *) touch_files="$touch_files $f.in";; - esac - done - touch $touch_files - ;; +# If it succeeded, we are done. +test $st -eq 0 && exit 0 - automake*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. - You might want to install the \`Automake' and \`Perl' packages. - Grab them from any GNU archive site." - find . -type f -name Makefile.am -print | - sed 's/\.am$/.in/' | - while read f; do touch "$f"; done - ;; - - autom4te*) - echo 1>&2 "\ -WARNING: \`$1' is needed, but is $msg. - You might have modified some files without having the - proper tools for further handling them. - You can get \`$1' as part of \`Autoconf' from any GNU - archive site." - - file=`echo "$*" | sed -n "$sed_output"` - test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` - if test -f "$file"; then - touch $file - else - test -z "$file" || exec >$file - echo "#! /bin/sh" - echo "# Created by GNU Automake missing as a replacement of" - echo "# $ $@" - echo "exit 0" - chmod +x $file - exit 1 - fi - ;; - - bison*|yacc*) - echo 1>&2 "\ -WARNING: \`$1' $msg. You should only need it if - you modified a \`.y' file. You may need the \`Bison' package - in order for those modifications to take effect. You can get - \`Bison' from any GNU archive site." - rm -f y.tab.c y.tab.h - if test $# -ne 1; then - eval LASTARG=\${$#} - case $LASTARG in - *.y) - SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` - if test -f "$SRCFILE"; then - cp "$SRCFILE" y.tab.c - fi - SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` - if test -f "$SRCFILE"; then - cp "$SRCFILE" y.tab.h - fi - ;; - esac - fi - if test ! -f y.tab.h; then - echo >y.tab.h - fi - if test ! -f y.tab.c; then - echo 'main() { return 0; }' >y.tab.c - fi - ;; - - lex*|flex*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified a \`.l' file. You may need the \`Flex' package - in order for those modifications to take effect. You can get - \`Flex' from any GNU archive site." - rm -f lex.yy.c - if test $# -ne 1; then - eval LASTARG=\${$#} - case $LASTARG in - *.l) - SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` - if test -f "$SRCFILE"; then - cp "$SRCFILE" lex.yy.c - fi - ;; - esac - fi - if test ! -f lex.yy.c; then - echo 'main() { return 0; }' >lex.yy.c - fi - ;; - - help2man*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified a dependency of a manual page. You may need the - \`Help2man' package in order for those modifications to take - effect. You can get \`Help2man' from any GNU archive site." - - file=`echo "$*" | sed -n "$sed_output"` - test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` - if test -f "$file"; then - touch $file - else - test -z "$file" || exec >$file - echo ".ab help2man is required to generate this page" - exit $? - fi - ;; - - makeinfo*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified a \`.texi' or \`.texinfo' file, or any other file - indirectly affecting the aspect of the manual. The spurious - call might also be the consequence of using a buggy \`make' (AIX, - DU, IRIX). You might want to install the \`Texinfo' package or - the \`GNU make' package. Grab either from any GNU archive site." - # The file to touch is that specified with -o ... - file=`echo "$*" | sed -n "$sed_output"` - test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` - if test -z "$file"; then - # ... or it is the one specified with @setfilename ... - infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` - file=`sed -n ' - /^@setfilename/{ - s/.* \([^ ]*\) *$/\1/ - p - q - }' $infile` - # ... or it is derived from the source name (dir/f.texi becomes f.info) - test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info - fi - # If the file does not exist, the user really needs makeinfo; - # let's fail without touching anything. - test -f $file || exit 1 - touch $file - ;; - - *) - echo 1>&2 "\ -WARNING: \`$1' is needed, and is $msg. - You might have modified some files without having the - proper tools for further handling them. Check the \`README' file, - it often tells you about the needed prerequisites for installing - this package. You may also peek at any GNU archive site, in case - some other package would contain this missing \`$1' program." - exit 1 - ;; -esac +# Also exit now if we it failed (or wasn't found), and '--version' was +# passed; such an option is passed most likely to detect whether the +# program is present and works. +case $2 in --version|--help) exit $st;; esac + +# Exit code 63 means version mismatch. This often happens when the user +# tries to use an ancient version of a tool on a file that requires a +# minimum version. +if test $st -eq 63; then + msg="probably too old" +elif test $st -eq 127; then + # Program was missing. + msg="missing on your system" +else + # Program was found and executed, but failed. Give up. + exit $st +fi -exit 0 +perl_URL=http://www.perl.org/ +flex_URL=http://flex.sourceforge.net/ +gnu_software_URL=http://www.gnu.org/software + +program_details () +{ + case $1 in + aclocal|automake) + echo "The '$1' program is part of the GNU Automake package:" + echo "<$gnu_software_URL/automake>" + echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:" + echo "<$gnu_software_URL/autoconf>" + echo "<$gnu_software_URL/m4/>" + echo "<$perl_URL>" + ;; + autoconf|autom4te|autoheader) + echo "The '$1' program is part of the GNU Autoconf package:" + echo "<$gnu_software_URL/autoconf/>" + echo "It also requires GNU m4 and Perl in order to run:" + echo "<$gnu_software_URL/m4/>" + echo "<$perl_URL>" + ;; + esac +} + +give_advice () +{ + # Normalize program name to check for. + normalized_program=`echo "$1" | sed ' + s/^gnu-//; t + s/^gnu//; t + s/^g//; t'` + + printf '%s\n' "'$1' is $msg." + + configure_deps="'configure.ac' or m4 files included by 'configure.ac'" + case $normalized_program in + autoconf*) + echo "You should only need it if you modified 'configure.ac'," + echo "or m4 files included by it." + program_details 'autoconf' + ;; + autoheader*) + echo "You should only need it if you modified 'acconfig.h' or" + echo "$configure_deps." + program_details 'autoheader' + ;; + automake*) + echo "You should only need it if you modified 'Makefile.am' or" + echo "$configure_deps." + program_details 'automake' + ;; + aclocal*) + echo "You should only need it if you modified 'acinclude.m4' or" + echo "$configure_deps." + program_details 'aclocal' + ;; + autom4te*) + echo "You might have modified some maintainer files that require" + echo "the 'autom4te' program to be rebuilt." + program_details 'autom4te' + ;; + bison*|yacc*) + echo "You should only need it if you modified a '.y' file." + echo "You may want to install the GNU Bison package:" + echo "<$gnu_software_URL/bison/>" + ;; + lex*|flex*) + echo "You should only need it if you modified a '.l' file." + echo "You may want to install the Fast Lexical Analyzer package:" + echo "<$flex_URL>" + ;; + help2man*) + echo "You should only need it if you modified a dependency" \ + "of a man page." + echo "You may want to install the GNU Help2man package:" + echo "<$gnu_software_URL/help2man/>" + ;; + makeinfo*) + echo "You should only need it if you modified a '.texi' file, or" + echo "any other file indirectly affecting the aspect of the manual." + echo "You might want to install the Texinfo package:" + echo "<$gnu_software_URL/texinfo/>" + echo "The spurious makeinfo call might also be the consequence of" + echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might" + echo "want to install GNU make:" + echo "<$gnu_software_URL/make/>" + ;; + *) + echo "You might have modified some files without having the proper" + echo "tools for further handling them. Check the 'README' file, it" + echo "often tells you about the needed prerequisites for installing" + echo "this package. You may also peek at any GNU archive site, in" + echo "case some other package contains this missing '$1' program." + ;; + esac +} + +give_advice "$1" | sed -e '1s/^/WARNING: /' \ + -e '2,$s/^/ /' >&2 + +# Propagate the correct exit status (expected to be 127 for a program +# not found, 63 for a program that failed due to version mismatch). +exit $st # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp)