Hello community,
here is the log from the commit of package liferea for openSUSE:Factory checked in at 2016-05-08 10:38:55
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Comparing /work/SRC/openSUSE:Factory/liferea (Old)
and /work/SRC/openSUSE:Factory/.liferea.new (New)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "liferea"
Changes:
--------
--- /work/SRC/openSUSE:Factory/liferea/liferea.changes 2016-02-29 09:12:14.000000000 +0100
+++ /work/SRC/openSUSE:Factory/.liferea.new/liferea.changes 2016-05-08 10:38:56.000000000 +0200
@@ -1,0 +2,8 @@
+Mon May 2 04:43:40 UTC 2016 - zaitor@opensuse.org
+
+- Update to version 1.10.19:
+ + Fixes gh#lwindolf/liferea#317: Compilation problems in 1.10.18
+ release.
+ + Fixes gh#lwindolf/liferea#73: Problem with updating favicons.
+
+-------------------------------------------------------------------
Old:
----
liferea-1.10.18.tar.bz2
New:
----
liferea-1.10.19.tar.bz2
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Other differences:
------------------
++++++ liferea.spec ++++++
--- /var/tmp/diff_new_pack.TuVksB/_old 2016-05-08 10:38:57.000000000 +0200
+++ /var/tmp/diff_new_pack.TuVksB/_new 2016-05-08 10:38:57.000000000 +0200
@@ -17,7 +17,7 @@
Name: liferea
-Version: 1.10.18
+Version: 1.10.19
Release: 0
Summary: Linux Feed Reader
License: GPL-2.0+
++++++ liferea-1.10.18.tar.bz2 -> liferea-1.10.19.tar.bz2 ++++++
++++ 2391 lines of diff (skipped)
++++ retrying with extended exclude list
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/liferea-1.10.18/ChangeLog new/liferea-1.10.19/ChangeLog
--- old/liferea-1.10.18/ChangeLog 2016-01-31 21:22:31.000000000 +0100
+++ new/liferea-1.10.19/ChangeLog 2016-04-04 18:49:06.000000000 +0200
@@ -1,3 +1,12 @@
+2016-04-04 Lars Windolf
+
+ Version 1.10.19
+
+ * Fixes #317: Compilation problems in 1.10.18 release
+ * Fixes #73: Problem with updating favicons
+ (reported by asl97)
+
+
2016-01-30 Lars Windolf
Version 1.10.18
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/liferea-1.10.18/ar-lib new/liferea-1.10.19/ar-lib
--- old/liferea-1.10.18/ar-lib 2014-07-11 23:05:06.000000000 +0200
+++ new/liferea-1.10.19/ar-lib 2014-11-03 20:37:52.000000000 +0100
@@ -2,9 +2,9 @@
# Wrapper for Microsoft lib.exe
me=ar-lib
-scriptversion=2012-03-01.08; # UTC
+scriptversion=2012-01-30.22; # UTC
-# Copyright (C) 2010-2013 Free Software Foundation, Inc.
+# Copyright (C) 2010, 2012 Free Software Foundation, Inc.
# Written by Peter Rosin .
#
# This program is free software; you can redistribute it and/or modify
@@ -153,9 +153,7 @@
delete=
extract=
list=
-quick=
replace=
-index=
create=
while test -n "$action"
@@ -164,10 +162,7 @@
d*) delete=yes ;;
x*) extract=yes ;;
t*) list=yes ;;
- q*) quick=yes ;;
r*) replace=yes ;;
- s*) index=yes ;;
- S*) ;; # the index is always updated implicitly
c*) create=yes ;;
u*) ;; # TODO: don't ignore the update modifier
v*) ;; # TODO: don't ignore the verbose modifier
@@ -178,8 +173,8 @@
action=${action#?}
done
-case $delete$extract$list$quick$replace,$index in
- yes,* | ,yes)
+case $delete$extract$list$replace in
+ yes)
;;
yesyes*)
func_error "more than one action specified"
@@ -230,7 +225,7 @@
done
fi
-elif test -n "$quick$replace"; then
+elif test -n "$replace"; then
if test ! -f "$orig_archive"; then
if test -z "$create"; then
echo "$me: creating $orig_archive"
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/liferea-1.10.18/compile new/liferea-1.10.19/compile
--- old/liferea-1.10.18/compile 2014-07-11 23:05:06.000000000 +0200
+++ new/liferea-1.10.19/compile 2014-11-03 20:37:52.000000000 +0100
@@ -1,9 +1,10 @@
#! /bin/sh
# Wrapper for compilers which do not understand '-c -o'.
-scriptversion=2012-10-14.11; # UTC
+scriptversion=2012-01-04.17; # UTC
-# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2009, 2010, 2012 Free
+# Software Foundation, Inc.
# Written by Tom Tromey .
#
# This program is free software; you can redistribute it and/or modify
@@ -78,53 +79,6 @@
esac
}
-# func_cl_dashL linkdir
-# Make cl look for libraries in LINKDIR
-func_cl_dashL ()
-{
- func_file_conv "$1"
- if test -z "$lib_path"; then
- lib_path=$file
- else
- lib_path="$lib_path;$file"
- fi
- linker_opts="$linker_opts -LIBPATH:$file"
-}
-
-# func_cl_dashl library
-# Do a library search-path lookup for cl
-func_cl_dashl ()
-{
- lib=$1
- found=no
- save_IFS=$IFS
- IFS=';'
- for dir in $lib_path $LIB
- do
- IFS=$save_IFS
- if $shared && test -f "$dir/$lib.dll.lib"; then
- found=yes
- lib=$dir/$lib.dll.lib
- break
- fi
- if test -f "$dir/$lib.lib"; then
- found=yes
- lib=$dir/$lib.lib
- break
- fi
- if test -f "$dir/lib$lib.a"; then
- found=yes
- lib=$dir/lib$lib.a
- break
- fi
- done
- IFS=$save_IFS
-
- if test "$found" != yes; then
- lib=$lib.lib
- fi
-}
-
# func_cl_wrapper cl arg...
# Adjust compile command to suit cl
func_cl_wrapper ()
@@ -155,34 +109,43 @@
;;
esac
;;
- -I)
- eat=1
- func_file_conv "$2" mingw
- set x "$@" -I"$file"
- shift
- ;;
-I*)
func_file_conv "${1#-I}" mingw
set x "$@" -I"$file"
shift
;;
- -l)
- eat=1
- func_cl_dashl "$2"
- set x "$@" "$lib"
- shift
- ;;
-l*)
- func_cl_dashl "${1#-l}"
- set x "$@" "$lib"
+ lib=${1#-l}
+ found=no
+ save_IFS=$IFS
+ IFS=';'
+ for dir in $lib_path $LIB
+ do
+ IFS=$save_IFS
+ if $shared && test -f "$dir/$lib.dll.lib"; then
+ found=yes
+ set x "$@" "$dir/$lib.dll.lib"
+ break
+ fi
+ if test -f "$dir/$lib.lib"; then
+ found=yes
+ set x "$@" "$dir/$lib.lib"
+ break
+ fi
+ done
+ IFS=$save_IFS
+
+ test "$found" != yes && set x "$@" "$lib.lib"
shift
;;
- -L)
- eat=1
- func_cl_dashL "$2"
- ;;
-L*)
- func_cl_dashL "${1#-L}"
+ func_file_conv "${1#-L}"
+ if test -z "$lib_path"; then
+ lib_path=$file
+ else
+ lib_path="$lib_path;$file"
+ fi
+ linker_opts="$linker_opts -LIBPATH:$file"
;;
-static)
shared=false
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/liferea-1.10.18/configure.ac new/liferea-1.10.19/configure.ac
--- old/liferea-1.10.18/configure.ac 2016-01-31 21:22:31.000000000 +0100
+++ new/liferea-1.10.19/configure.ac 2016-04-04 18:50:46.000000000 +0200
@@ -1,6 +1,6 @@
dnl Process this file with autoconf to produce a configure script.
-AC_INIT([liferea],[1.10.18],[liferea-devel@lists.sourceforge.net])
+AC_INIT([liferea],[1.10.19],[liferea-devel@lists.sourceforge.net])
AC_CANONICAL_HOST
AC_CONFIG_SRCDIR([src/feedlist.c])
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/liferea-1.10.18/missing new/liferea-1.10.19/missing
--- old/liferea-1.10.18/missing 2014-07-11 23:05:06.000000000 +0200
+++ new/liferea-1.10.19/missing 2014-11-03 20:37:52.000000000 +0100
@@ -1,10 +1,11 @@
#! /bin/sh
-# Common wrapper for a few potentially missing GNU programs.
+# Common stub for a few missing GNU programs while installing.
-scriptversion=2013-10-28.13; # UTC
+scriptversion=2012-01-06.13; # UTC
-# Copyright (C) 1996-2013 Free Software Foundation, Inc.
-# Originally written by Fran,cois Pinard , 1996.
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006,
+# 2008, 2009, 2010, 2011, 2012 Free Software Foundation, Inc.
+# Originally by Fran,cois Pinard , 1996.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
@@ -25,40 +26,68 @@
# the same distribution terms that you use for the rest of that program.
if test $# -eq 0; then
- echo 1>&2 "Try '$0 --help' for more information"
+ echo 1>&2 "Try \`$0 --help' for more information"
exit 1
fi
-case $1 in
+run=:
+sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
+sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
+
+# In the cases where this matters, `missing' is being run in the
+# srcdir already.
+if test -f configure.ac; then
+ configure_ac=configure.ac
+else
+ configure_ac=configure.in
+fi
- --is-lightweight)
- # Used by our autoconf macros to check whether the available missing
- # script is modern enough.
- exit 0
- ;;
+msg="missing on your system"
- --run)
- # Back-compat with the calling convention used by older automake.
- shift
- ;;
+case $1 in
+--run)
+ # Try to run requested program, and just exit if it succeeds.
+ run=
+ shift
+ "$@" && exit 0
+ # Exit code 63 means version mismatch. This often happens
+ # when the user try to use an ancient version of a tool on
+ # a file that requires a minimum version. In this case we
+ # we should proceed has if the program had been absent, or
+ # if --run hadn't been passed.
+ if test $? = 63; then
+ run=:
+ msg="probably too old"
+ fi
+ ;;
-h|--h|--he|--hel|--help)
echo "\
$0 [OPTION]... PROGRAM [ARGUMENT]...
-Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due
-to PROGRAM being missing or too old.
+Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
+error status if there is no known handling for PROGRAM.
Options:
-h, --help display this help and exit
-v, --version output version information and exit
+ --run try to run the given command, and emulate it if it fails
Supported PROGRAM values:
- aclocal autoconf autoheader autom4te automake makeinfo
- bison yacc flex lex help2man
+ aclocal touch file \`aclocal.m4'
+ autoconf touch file \`configure'
+ autoheader touch file \`config.h.in'
+ autom4te touch the output file, or create a stub one
+ automake touch all \`Makefile.in' files
+ bison create \`y.tab.[ch]', if possible, from existing .[ch]
+ flex create \`lex.yy.c', if possible, from existing .c
+ help2man touch the output file
+ lex create \`lex.yy.c', if possible, from existing .c
+ makeinfo touch the output file
+ yacc create \`y.tab.[ch]', if possible, from existing .[ch]
-Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and
-'g' are ignored when checking the name.
+Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and
+\`g' are ignored when checking the name.
Send bug reports to ."
exit $?
@@ -70,141 +99,228 @@
;;
-*)
- echo 1>&2 "$0: unknown '$1' option"
- echo 1>&2 "Try '$0 --help' for more information"
+ echo 1>&2 "$0: Unknown \`$1' option"
+ echo 1>&2 "Try \`$0 --help' for more information"
exit 1
;;
esac
-# Run the given program, remember its exit status.
-"$@"; st=$?
+# normalize program name to check for.
+program=`echo "$1" | sed '
+ s/^gnu-//; t
+ s/^gnu//; t
+ s/^g//; t'`
+
+# Now exit if we have it, but it failed. Also exit now if we
+# don't have it and --version was passed (most likely to detect
+# the program). This is about non-GNU programs, so use $1 not
+# $program.
+case $1 in
+ lex*|yacc*)
+ # Not GNU programs, they don't have --version.
+ ;;
-# If it succeeded, we are done.
-test $st -eq 0 && exit 0
+ *)
+ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+ # We have it, but it failed.
+ exit 1
+ elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+ # Could not run --version or --help. This is probably someone
+ # running `$TOOL --version' or `$TOOL --help' to check whether
+ # $TOOL exists and not knowing $TOOL uses missing.
+ exit 1
+ fi
+ ;;
+esac
-# Also exit now if we it failed (or wasn't found), and '--version' was
-# passed; such an option is passed most likely to detect whether the
-# program is present and works.
-case $2 in --version|--help) exit $st;; esac
-
-# Exit code 63 means version mismatch. This often happens when the user
-# tries to use an ancient version of a tool on a file that requires a
-# minimum version.
-if test $st -eq 63; then
- msg="probably too old"
-elif test $st -eq 127; then
- # Program was missing.
- msg="missing on your system"
-else
- # Program was found and executed, but failed. Give up.
- exit $st
-fi
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case $program in
+ aclocal*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`acinclude.m4' or \`${configure_ac}'. You might want
+ to install the \`Automake' and \`Perl' packages. Grab them from
+ any GNU archive site."
+ touch aclocal.m4
+ ;;
+
+ autoconf*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`${configure_ac}'. You might want to install the
+ \`Autoconf' and \`GNU m4' packages. Grab them from any GNU
+ archive site."
+ touch configure
+ ;;
+
+ autoheader*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`acconfig.h' or \`${configure_ac}'. You might want
+ to install the \`Autoconf' and \`GNU m4' packages. Grab them
+ from any GNU archive site."
+ files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
+ test -z "$files" && files="config.h"
+ touch_files=
+ for f in $files; do
+ case $f in
+ *:*) touch_files="$touch_files "`echo "$f" |
+ sed -e 's/^[^:]*://' -e 's/:.*//'`;;
+ *) touch_files="$touch_files $f.in";;
+ esac
+ done
+ touch $touch_files
+ ;;
+
+ automake*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
+ You might want to install the \`Automake' and \`Perl' packages.
+ Grab them from any GNU archive site."
+ find . -type f -name Makefile.am -print |
+ sed 's/\.am$/.in/' |
+ while read f; do touch "$f"; done
+ ;;
+
+ autom4te*)
+ echo 1>&2 "\
+WARNING: \`$1' is needed, but is $msg.
+ You might have modified some files without having the
+ proper tools for further handling them.
+ You can get \`$1' as part of \`Autoconf' from any GNU
+ archive site."
+
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ if test -f "$file"; then
+ touch $file
+ else
+ test -z "$file" || exec >$file
+ echo "#! /bin/sh"
+ echo "# Created by GNU Automake missing as a replacement of"
+ echo "# $ $@"
+ echo "exit 0"
+ chmod +x $file
+ exit 1
+ fi
+ ;;
+
+ bison*|yacc*)
+ echo 1>&2 "\
+WARNING: \`$1' $msg. You should only need it if
+ you modified a \`.y' file. You may need the \`Bison' package
+ in order for those modifications to take effect. You can get
+ \`Bison' from any GNU archive site."
+ rm -f y.tab.c y.tab.h
+ if test $# -ne 1; then
+ eval LASTARG=\${$#}
+ case $LASTARG in
+ *.y)
+ SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
+ if test -f "$SRCFILE"; then
+ cp "$SRCFILE" y.tab.c
+ fi
+ SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
+ if test -f "$SRCFILE"; then
+ cp "$SRCFILE" y.tab.h
+ fi
+ ;;
+ esac
+ fi
+ if test ! -f y.tab.h; then
+ echo >y.tab.h
+ fi
+ if test ! -f y.tab.c; then
+ echo 'main() { return 0; }' >y.tab.c
+ fi
+ ;;
+
+ lex*|flex*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified a \`.l' file. You may need the \`Flex' package
+ in order for those modifications to take effect. You can get
+ \`Flex' from any GNU archive site."
+ rm -f lex.yy.c
+ if test $# -ne 1; then
+ eval LASTARG=\${$#}
+ case $LASTARG in
+ *.l)
+ SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
+ if test -f "$SRCFILE"; then
+ cp "$SRCFILE" lex.yy.c
+ fi
+ ;;
+ esac
+ fi
+ if test ! -f lex.yy.c; then
+ echo 'main() { return 0; }' >lex.yy.c
+ fi
+ ;;
+
+ help2man*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified a dependency of a manual page. You may need the
+ \`Help2man' package in order for those modifications to take
+ effect. You can get \`Help2man' from any GNU archive site."
+
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ if test -f "$file"; then
+ touch $file
+ else
+ test -z "$file" || exec >$file
+ echo ".ab help2man is required to generate this page"
+ exit $?
+ fi
+ ;;
+
+ makeinfo*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified a \`.texi' or \`.texinfo' file, or any other file
+ indirectly affecting the aspect of the manual. The spurious
+ call might also be the consequence of using a buggy \`make' (AIX,
+ DU, IRIX). You might want to install the \`Texinfo' package or
+ the \`GNU make' package. Grab either from any GNU archive site."
+ # The file to touch is that specified with -o ...
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ if test -z "$file"; then
+ # ... or it is the one specified with @setfilename ...
+ infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+ file=`sed -n '
+ /^@setfilename/{
+ s/.* \([^ ]*\) *$/\1/
+ p
+ q
+ }' $infile`
+ # ... or it is derived from the source name (dir/f.texi becomes f.info)
+ test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
+ fi
+ # If the file does not exist, the user really needs makeinfo;
+ # let's fail without touching anything.
+ test -f $file || exit 1
+ touch $file
+ ;;
+
+ *)
+ echo 1>&2 "\
+WARNING: \`$1' is needed, and is $msg.
+ You might have modified some files without having the
+ proper tools for further handling them. Check the \`README' file,
+ it often tells you about the needed prerequisites for installing
+ this package. You may also peek at any GNU archive site, in case
+ some other package would contain this missing \`$1' program."
+ exit 1
+ ;;
+esac
-perl_URL=http://www.perl.org/
-flex_URL=http://flex.sourceforge.net/
-gnu_software_URL=http://www.gnu.org/software
-
-program_details ()
-{
- case $1 in
- aclocal|automake)
- echo "The '$1' program is part of the GNU Automake package:"
- echo "<$gnu_software_URL/automake>"
- echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:"
- echo "<$gnu_software_URL/autoconf>"
- echo "<$gnu_software_URL/m4/>"
- echo "<$perl_URL>"
- ;;
- autoconf|autom4te|autoheader)
- echo "The '$1' program is part of the GNU Autoconf package:"
- echo "<$gnu_software_URL/autoconf/>"
- echo "It also requires GNU m4 and Perl in order to run:"
- echo "<$gnu_software_URL/m4/>"
- echo "<$perl_URL>"
- ;;
- esac
-}
-
-give_advice ()
-{
- # Normalize program name to check for.
- normalized_program=`echo "$1" | sed '
- s/^gnu-//; t
- s/^gnu//; t
- s/^g//; t'`
-
- printf '%s\n' "'$1' is $msg."
-
- configure_deps="'configure.ac' or m4 files included by 'configure.ac'"
- case $normalized_program in
- autoconf*)
- echo "You should only need it if you modified 'configure.ac',"
- echo "or m4 files included by it."
- program_details 'autoconf'
- ;;
- autoheader*)
- echo "You should only need it if you modified 'acconfig.h' or"
- echo "$configure_deps."
- program_details 'autoheader'
- ;;
- automake*)
- echo "You should only need it if you modified 'Makefile.am' or"
- echo "$configure_deps."
- program_details 'automake'
- ;;
- aclocal*)
- echo "You should only need it if you modified 'acinclude.m4' or"
- echo "$configure_deps."
- program_details 'aclocal'
- ;;
- autom4te*)
- echo "You might have modified some maintainer files that require"
- echo "the 'autom4te' program to be rebuilt."
- program_details 'autom4te'
- ;;
- bison*|yacc*)
- echo "You should only need it if you modified a '.y' file."
- echo "You may want to install the GNU Bison package:"
- echo "<$gnu_software_URL/bison/>"
- ;;
- lex*|flex*)
- echo "You should only need it if you modified a '.l' file."
- echo "You may want to install the Fast Lexical Analyzer package:"
- echo "<$flex_URL>"
- ;;
- help2man*)
- echo "You should only need it if you modified a dependency" \
- "of a man page."
- echo "You may want to install the GNU Help2man package:"
- echo "<$gnu_software_URL/help2man/>"
- ;;
- makeinfo*)
- echo "You should only need it if you modified a '.texi' file, or"
- echo "any other file indirectly affecting the aspect of the manual."
- echo "You might want to install the Texinfo package:"
- echo "<$gnu_software_URL/texinfo/>"
- echo "The spurious makeinfo call might also be the consequence of"
- echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might"
- echo "want to install GNU make:"
- echo "<$gnu_software_URL/make/>"
- ;;
- *)
- echo "You might have modified some files without having the proper"
- echo "tools for further handling them. Check the 'README' file, it"
- echo "often tells you about the needed prerequisites for installing"
- echo "this package. You may also peek at any GNU archive site, in"
- echo "case some other package contains this missing '$1' program."
- ;;
- esac
-}
-
-give_advice "$1" | sed -e '1s/^/WARNING: /' \
- -e '2,$s/^/ /' >&2
-
-# Propagate the correct exit status (expected to be 127 for a program
-# not found, 63 for a program that failed due to version mismatch).
-exit $st
+exit 0
# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/liferea-1.10.18/src/feed.c new/liferea-1.10.19/src/feed.c
--- old/liferea-1.10.18/src/feed.c 2016-01-31 21:22:31.000000000 +0100
+++ new/liferea-1.10.19/src/feed.c 2016-04-04 18:46:40.000000000 +0200
@@ -293,6 +293,8 @@
liferea_shell_set_status_bar (_("\"%s\" is not available"), node_get_title (node));
}
+ feed_list_node_update (node->id);
+
debug_exit ("feed_process_update_result");
}