Hello community, here is the log from the commit of package ctdb.2872 for openSUSE:12.3:Update checked in at 2014-06-25 09:21:43 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:12.3:Update/ctdb.2872 (Old) and /work/SRC/openSUSE:12.3:Update/.ctdb.2872.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "ctdb.2872" Changes: -------- New Changes file: --- /dev/null 2014-06-12 08:28:52.960034756 +0200 +++ /work/SRC/openSUSE:12.3:Update/.ctdb.2872.new/ctdb.changes 2014-06-25 09:21:44.000000000 +0200 @@ -0,0 +1,1361 @@ +------------------------------------------------------------------- +Tue Jun 10 15:07:19 UTC 2014 - ddiss@suse.com + +- Fix temp file vulnerabilities; CVE-2013-4159; (bnc#836064). + +------------------------------------------------------------------- +Wed Mar 12 19:17:53 UTC 2014 - ddiss@suse.com + +- Avoid lockwait congestion by using an overflow queue; (bnc#867815). + +------------------------------------------------------------------- +Thu Jul 11 14:47:15 UTC 2013 - ddiss@suse.com + +- Conditionally package the CTDB Perforance Co-Pilot monitoring agent. + + Only built if suse_version is greater than 1140. + + Add ctdb-pcp-pmda-rpmlintrc to filter out devel-file-in-non-devel-package + warning. + +------------------------------------------------------------------- +Thu Jul 11 13:22:36 UTC 2013 - ddiss@suse.com + +- Update to version 2.3 + + 2 new configuration variables for 60.nfs eventscript: + - CTDB_MONITOR_NFS_THREAD_COUNT + - CTDB_NFS_DUMP_STUCK_THREADS + + Removed DeadlockTimeout tunable. To enable debug of locking issues set + CTDB_DEBUG_LOCKS=/etc/ctdb/debug_locks.sh + + In overall statistics and database statistics, lock buckets have been + updated to use following timings: + < 1ms, < 10ms, < 100ms, < 1s, < 2s, < 4s, < 8s, < 16s, < 32s, < 64s, >= 64s + + Initscript is now simplified with most CTDB-specific functionality + split out to ctdbd_wrapper, which is used to start and stop ctdbd. + + Add systemd support. + + CTDB subprocesses are now given informative names to allow them to + be easily distinguished when using programs like "top" or "perf". + + ctdb tool should not exit from a retry loop if a control times out + (e.g. under high load). This simple fix will stop an exit from the + retry loop on any error. + + When updating flags on all nodes, use the correct updated flags. This + should avoid wrong flag change messages in the logs. + + The recovery daemon will not ban other nodes if the current node + is banned. + + ctdb dbstatistics command now correctly outputs database statistics. + + Fixed a panic with overlapping shutdowns (regression in 2.2). + + Fixed 60.ganesha "monitor" event (regression in 2.2). + + Fixed a buffer overflow in the "reloadips" implementation. + + Fixed segmentation faults in ping_pong (called with incorrect + argument) and test binaries (called when ctdbd not running). + + The recovery daemon on stopped or banned node will stop participating in any + cluster activity. + + Improve cluster wide database traverse by sending the records directly from + traverse child process to requesting node. + + TDB checking and dropping of all IPs moved from initscript to "init" + event in 00.ctdb. + + To avoid "rogue IPs" the release IP callback now fails if the + released IP is still present on an interface. + +- Update to version 2.2 + + The "stopped" event has been removed. + + New --pidfile option for ctdbd, used by initscript + + The 60.nfs eventscript now uses configuration files in + /etc/ctdb/nfs-rpc-checks.d/ for timeouts and actions instead of + hardcoding them into the script. + + Notification handler scripts can now be dropped into /etc/ctdb/notify.d/. + + The NoIPTakeoverOnDisabled tunable has been renamed to + NoIPHostOnAllDisabled and now works properly when set on individual + nodes. + + New ctdb subcommand "runstate" prints the current internal runstate. + Runstates are used for serialising startup. + + The Unix domain socket is now set to non-blocking after the + connection succeeds. This avoids connections failing with EAGAIN + and not being retried. + + Fetching from the log ringbuffer now succeeds if the buffer is full. + + Fix a severe recovery bug that can lead to data corruption for SMB clients. + + The statd-callout script now runs as root via sudo. + + "ctdb delip" no longer fails if it is unable to move the IP. + + A race in the ctdb tool's ipreallocate code was fixed. This fixes + potential bugs in the "disable", "enable", "stop", "continue", + "ban", "unban", "ipreallocate" and "sync" commands. + + The monitor cancellation code could sometimes hang indefinitely. + This could cause "ctdb stop" and "ctdb shutdown" to fail. + + The socket I/O handling has been optimised to improve performance. + + IPs will not be assigned to nodes during CTDB initialisation. They + will only be assigned to nodes that are in the "running" runstate. + + Improved database locking code. One improvement is to use a + standalone locking helper executable - the avoids creating many + forked copies of ctdbd and potentially running a node out of memory. + + New control CTDB_CONTROL_IPREALLOCATED is now used to generate + "ipreallocated" events. + + Message handlers are now indexed, providing a significant + performance improvement. + +------------------------------------------------------------------- +Fri Oct 19 09:33:59 UTC 2012 - ddiss@suse.com + +- Update to version 1.2.52 + + util: ctdb_fork() closes all sockets opened by the main daemon + + Logging: Map TEVENT_DEBUG_FATAL to DEBUG_CRIT + + Eventscripts: "recovered" event should not fail on NATGW failure + + common: Debug ctdb_addr_to_str() using new function ctdb_external_trace() + + Initscript: Kill any existing ctdbd processes if the ping succeeds + + Eventscripts: new functions set_proc() and get_proc(). + + Eventscripts: Add "reconfigure" pseudo-event for policy routing + +------------------------------------------------------------------- +Wed Aug 8 17:45:25 UTC 2012 - lmuelle@suse.com + +- Update to version 1.2.46 + + Add ltdbtool and man page + +------------------------------------------------------------------- +Tue Feb 28 14:24:59 UTC 2012 - lmuelle@suse.de + +- Split the PreReq in separate lines. +- PreReq coreutils instead of fileutils. + +------------------------------------------------------------------- +Tue Feb 7 17:07:09 CET 2012 - ddiss@suse.de + +- Remove stop_on_removal and restart_on_update pre/post uninstall hooks, ctdbd + processes are managed by the CTDB resource agent; (bnc#745388). + +------------------------------------------------------------------- +Tue Feb 7 11:05:59 CET 2012 - ddiss@suse.de + +- Mark event scripts as %verify(not mode) to ensure rpm --verify does not + complain about mode changes made by enablescript; (bnc#694262). + +------------------------------------------------------------------- +Thu Jan 26 14:42:32 UTC 2012 - lmuelle@suse.de + +- Use correct license, GPLv3+ for the package. + +------------------------------------------------------------------- +Mon Jan 23 16:36:00 UTC 2012 - lmuelle@suse.de + +- Simplify conditional BuildRrequires of pkg-config. + +------------------------------------------------------------------- +Wed Dec 21 12:59:18 UTC 2011 - coolo@suse.com + +- Add autoconf as buildrequire to avoid implicit dependency for post-11.4 + systems. + +------------------------------------------------------------------- +Tue Dec 20 20:24:22 UTC 2011 - coolo@suse.com + +- Remove call to suse_update_config macro for post-11.4 systems. + +------------------------------------------------------------------- +Sun Sep 18 00:07:30 UTC 2011 - jengelh@medozas.de + +- Remove redundant tags/sections from specfile + +------------------------------------------------------------------- +Tue May 10 09:23:00 UTC 2011 - jmcdonough@suse.de + +- Update to version 1.2.29 + + Interface handling updates + + Reduce logging at lower levels + + Event checking updates + + Various other fixes + +------------------------------------------------------------------- +Fri Apr 1 21:14:00 UTC 2011 - jmcdonough@suse.de + +- Update to version 1.2.27 + + Lots of fixes + + Remove nfstickle event script + + Add ganesha event script + +------------------------------------------------------------------- +Mon Aug 23 09:22:20 UTC 2010 - jmcdonough@suse.de + +- Update to version 1.2. + + Many tdb cleanups and fixups by rusty. + + Create cnfs event script and crash cleanup script. + + Create libctdb and reorganize headers. + + Expand test suite significantly. + + Remove "ctdb freeze" command. + + Lots of fixes. + +------------------------------------------------------------------- +Sun Apr 25 15:37:24 UTC 2010 - lmuelle@suse.de + +- Buildrequire pkg-config only for SUSE based products. + +------------------------------------------------------------------- +Sat Apr 24 11:38:16 UTC 2010 - coolo@novell.com + +- buildrequire pkg-config to fix provides + +------------------------------------------------------------------- +Fri Apr 2 17:03:00 UTC 2010 - jmcdonough@suse.de + +- Update to version 1.0.114. + + Lots of changes from Metze ++++ 1164 more lines (skipped) ++++ between /dev/null ++++ and /work/SRC/openSUSE:12.3:Update/.ctdb.2872.new/ctdb.changes New: ---- ctdb-2.3.tar.gz ctdb-pcp-pmda-rpmlintrc ctdb-socket-path.patch ctdb-sysconfig-suse.template ctdb.changes ctdb.spec ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ ctdb.spec ++++++ # # spec file for package ctdb # # Copyright (c) 2014 SUSE LINUX Products GmbH, Nuernberg, Germany. # # All modifications and additions to the file contributed by third parties # remain the property of their copyright owners, unless otherwise agreed # upon. The license for this file, and modifications and additions to the # file, is the same license as for the pristine package itself (unless the # license for the pristine package is not an Open Source License, in which # case the license is the MIT License). An "Open Source License" is a # license that conforms to the Open Source Definition (Version 1.9) # published by the Open Source Initiative. # Please submit bugfixes or comments via http://bugs.opensuse.org/ # %if 0%{?suse_version} > 1140 %define build_pmda 1 %endif Summary: Clustered TDB License: GPL-3.0+ Group: System/Daemons Name: ctdb Version: 2.3 Release: 0 Url: http://ctdb.samba.org/ Source: ctdb-%{version}.tar.gz Source1: ctdb-sysconfig-suse.template Patch1: ctdb-socket-path.patch %if 0%{?suse_version} PreReq: %{?fillup_prereq} PreReq: insserv %else PreReq: /sbin/chkconfig %endif PreReq: coreutils PreReq: /bin/mktemp PreReq: /usr/bin/killall PreReq: sed %define initdir %{_sysconfdir}/init.d BuildRoot: %{_tmppath}/%{name}-%{version}-build %if 0%{?suse_version} == 0 || 0%{?suse_version} > 1140 BuildRequires: autoconf %endif %if 0%{?suse_version} > 1020 BuildRequires: pkg-config %else BuildRequires: pkgconfig %endif %if 0%{?build_pmda} BuildRequires: libpcp-devel %endif %description ctdb is the clustered database used by Samba %package devel Summary: Libraries and Header Files to Develop Programs with ctdb support Group: Development/Libraries/C and C++ %description devel This package contains the static libraries and header files needed to develop programs which make use of ctdb. %if 0%{?build_pmda} %package pcp-pmda Summary: Performance Co-Pilot (PCP) monitoring agent Group: System/Monitoring %description pcp-pmda The CTDB Performance Co-Pilot (PCP) monitoring agent allows remote PCP clients to view and capture detailed real-time performance metrics for one or more cluster nodes. %endif %prep %setup -q %patch1 -p1 %build %if 0%{?suse_version} && 0%{?suse_version} < 1141 %{?suse_update_config:%{suse_update_config -f}} %endif autoreconf --force --install \ -I. \ -Ilib/replace \ -Ilib/popt \ -Ilib/talloc \ -Ilib/tdb \ -Ilib/tevent export CFLAGS="$RPM_OPT_FLAGS $EXTRA -O0 -D_GNU_SOURCE -DCTDB_VERS=\"%{version}-%{release}\"" %if 0%{?build_pmda} %{configure} --enable-pmda %else %{configure} %endif %{__make} %{?_smp_mflags} docdir=%{_docdir} %install mkdir -p \ ${RPM_BUILD_ROOT}/%{_sysconfdir}/sysconfig \ ${RPM_BUILD_ROOT}/%{_sysconfdir}/init.d \ ${RPM_BUILD_ROOT}/%{_localstatedir}/lib/ctdb/persistent \ ${RPM_BUILD_ROOT}/%{_localstatedir}/log/ctdb %{__make} install \ DESTDIR=${RPM_BUILD_ROOT} \ docdir=%{_docdir} %if 0%{?suse_version} mkdir -p ${RPM_BUILD_ROOT}/%{_var}/adm/fillup-templates %{__install} -m 0644 ${RPM_SOURCE_DIR}/ctdb-sysconfig-suse.template ${RPM_BUILD_ROOT}/%{_var}/adm/fillup-templates/sysconfig.ctdb %else %{__install} -m 0644 config/ctdb.sysconfig ${RPM_BUILD_ROOT}/%{_sysconfdir}/sysconfig/ctdb %endif %{__install} -m 0755 config/ctdb.init ${RPM_BUILD_ROOT}/%{initdir}/ctdb # sudo can be used by statd-callout, but is not needed rm ${RPM_BUILD_ROOT}/%{_sysconfdir}/sudoers.d/ctdb %preun %if 0%{?suse_version} == 0 if [ $1 = 0 ] ; then test -x /sbin/chkconfig && /sbin/chkconfig --del ctdb fi %endif exit 0 %post %if 0%{?suse_version} %{fillup_and_insserv} %endif %postun %if 0%{?suse_version} %{insserv_cleanup} %else if [ "$1" -ge "1" ]; then %{initdir}/ctdb restart >/dev/null fi %endif exit 0 %files %defattr(-,root,root) %dir %{_sysconfdir}/ctdb %dir %{_sysconfdir}/ctdb/events.d %dir %{_sysconfdir}/ctdb/nfs-rpc-checks.d %if 0%{?suse_version} %{_var}/adm/fillup-templates/sysconfig.ctdb %else %config(noreplace) %{_sysconfdir}/sysconfig/ctdb %endif %config(noreplace) %{_sysconfdir}/ctdb/notify.sh %config(noreplace) %{_sysconfdir}/ctdb/functions %attr(755,root,root) %{initdir}/ctdb %attr(775,root,root) %verify(not mode) %{_sysconfdir}/ctdb/events.d/00.ctdb %attr(644,root,root) %verify(not mode) %{_sysconfdir}/ctdb/events.d/01.reclock %attr(644,root,root) %verify(not mode) %{_sysconfdir}/ctdb/events.d/10.interface %attr(644,root,root) %verify(not mode) %{_sysconfdir}/ctdb/events.d/11.natgw %attr(644,root,root) %verify(not mode) %{_sysconfdir}/ctdb/events.d/11.routing %attr(644,root,root) %verify(not mode) %{_sysconfdir}/ctdb/events.d/13.per_ip_routing %attr(644,root,root) %verify(not mode) %{_sysconfdir}/ctdb/events.d/20.multipathd %attr(644,root,root) %verify(not mode) %{_sysconfdir}/ctdb/events.d/31.clamd %attr(644,root,root) %verify(not mode) %{_sysconfdir}/ctdb/events.d/40.vsftpd %attr(644,root,root) %verify(not mode) %{_sysconfdir}/ctdb/events.d/41.httpd %attr(644,root,root) %verify(not mode) %{_sysconfdir}/ctdb/events.d/50.samba %attr(644,root,root) %verify(not mode) %{_sysconfdir}/ctdb/events.d/60.nfs %attr(644,root,root) %verify(not mode) %{_sysconfdir}/ctdb/events.d/60.ganesha %attr(644,root,root) %verify(not mode) %{_sysconfdir}/ctdb/events.d/62.cnfs %attr(644,root,root) %verify(not mode) %{_sysconfdir}/ctdb/events.d/70.iscsi %attr(644,root,root) %verify(not mode) %{_sysconfdir}/ctdb/events.d/91.lvs %attr(644,root,root) %verify(not mode) %{_sysconfdir}/ctdb/events.d/40.fs_use %attr(644,root,root) %verify(not mode) %{_sysconfdir}/ctdb/events.d/49.winbind %attr(644,root,root) %verify(not mode) %{_sysconfdir}/ctdb/nfs-rpc-checks.d/10.statd.check %attr(644,root,root) %verify(not mode) %{_sysconfdir}/ctdb/nfs-rpc-checks.d/20.nfsd.check %attr(644,root,root) %verify(not mode) %{_sysconfdir}/ctdb/nfs-rpc-checks.d/30.lockd.check %attr(644,root,root) %verify(not mode) %{_sysconfdir}/ctdb/nfs-rpc-checks.d/40.mountd.check %attr(644,root,root) %verify(not mode) %{_sysconfdir}/ctdb/nfs-rpc-checks.d/50.rquotad.check %{_sysconfdir}/ctdb/ctdb-crash-cleanup.sh %{_sysconfdir}/ctdb/gcore_trace.sh %{_sysconfdir}/ctdb/statd-callout %{_sysconfdir}/ctdb/debug-hung-script.sh %{_sbindir}/ctdbd %{_sbindir}/ctdbd_wrapper %{_bindir}/ctdb %{_bindir}/smnotify %{_bindir}/ctdb_diagnostics %{_bindir}/ltdbtool %{_bindir}/onnode %{_bindir}/ping_pong %{_bindir}/ctdb_lock_helper %dir %{_localstatedir}/lib/ctdb %dir %{_localstatedir}/lib/ctdb/persistent %dir %{_localstatedir}/log/ctdb %{_mandir}/man1/* %files devel %defattr(-,root,root) %{_includedir}/ctdb.h %{_includedir}/ctdb_client.h %{_includedir}/ctdb_private.h %{_includedir}/ctdb_protocol.h %{_includedir}/ctdb_typesafe_cb.h %attr(644,root,root) %{_libdir}/libctdb.a %{_libdir}/pkgconfig/ctdb.pc %if 0%{?build_pmda} %files pcp-pmda %defattr(-,root,root) %dir %{_localstatedir}/lib/pcp %dir %{_localstatedir}/lib/pcp/pmdas %dir %{_localstatedir}/lib/pcp/pmdas/ctdb %{_localstatedir}/lib/pcp/pmdas/ctdb/Install %{_localstatedir}/lib/pcp/pmdas/ctdb/README %{_localstatedir}/lib/pcp/pmdas/ctdb/Remove %{_localstatedir}/lib/pcp/pmdas/ctdb/domain.h %{_localstatedir}/lib/pcp/pmdas/ctdb/help %{_localstatedir}/lib/pcp/pmdas/ctdb/pmdactdb %{_localstatedir}/lib/pcp/pmdas/ctdb/pmns %endif %changelog ++++++ ctdb-pcp-pmda-rpmlintrc ++++++ # Note: there are some headers (e.g. domain.h) and in a few cases some # C source files that rpmlint complains about. These are not devel files, # but rather they are (slightly obscure) PCP PMDA config files. # addFilter('E: devel-file-in-non-devel-package') ++++++ ctdb-socket-path.patch ++++++ commit 30bcec58114ffaed4cf79d290875b8c18ff3e94e Author: Jim McDonough <jmcd@samba.org> Date: Fri Apr 1 16:12:04 2011 -0400 Use correct socket path Index: ctdb-2.3/doc/ctdb.1.html =================================================================== --- ctdb-2.3.orig/doc/ctdb.1.html +++ ctdb-2.3/doc/ctdb.1.html @@ -23,7 +23,7 @@ Change the debug level for the command. Default is 0. </p></dd><dt><span class="term">--socket=<filename></span></dt><dd><p> Specify the socketname to use when connecting to the local ctdb - daemon. The default is /tmp/ctdb.socket . + daemon. The default is /var/lib/ctdb/ctdb.socket . </p><p> You only need to specify this parameter if you run multiple ctdb daemons on the same physical host and thus can not use the default Index: ctdb-2.3/doc/ctdb.1.xml =================================================================== --- ctdb-2.3.orig/doc/ctdb.1.xml +++ ctdb-2.3/doc/ctdb.1.xml @@ -118,7 +118,7 @@ <listitem> <para> Specify the socketname to use when connecting to the local ctdb - daemon. The default is /tmp/ctdb.socket . + daemon. The default is /var/lib/ctdb/ctdb.socket . </para> <para> You only need to specify this parameter if you run multiple ctdb Index: ctdb-2.3/doc/ctdbd.1.html =================================================================== --- ctdb-2.3.orig/doc/ctdbd.1.html +++ ctdb-2.3/doc/ctdbd.1.html @@ -100,7 +100,7 @@ </p></dd><dt><span class="term">--socket=<filename></span></dt><dd><p> This specifies the name of the domain socket that ctdbd will create. This socket is used for local clients to attach to and communicate with the ctdbd daemon. </p><p> - The default is /tmp/ctdb.socket . You only need to use this option if you plan to run multiple ctdbd daemons on the same physical host. + The default is /var/lib/ctdb/ctdb.socket . You only need to use this option if you plan to run multiple ctdbd daemons on the same physical host. </p></dd><dt><span class="term">--start-as-disabled</span></dt><dd><p> This makes the ctdb daemon to be DISABLED when it starts up. </p><p> Index: ctdb-2.3/doc/ctdbd.1.xml =================================================================== --- ctdb-2.3.orig/doc/ctdbd.1.xml +++ ctdb-2.3/doc/ctdbd.1.xml @@ -287,7 +287,7 @@ This specifies the name of the domain socket that ctdbd will create. This socket is used for local clients to attach to and communicate with the ctdbd daemon. </para> <para> - The default is /tmp/ctdb.socket . You only need to use this option if you plan to run multiple ctdbd daemons on the same physical host. + The default is /var/lib/ctdb/ctdb.socket . You only need to use this option if you plan to run multiple ctdbd daemons on the same physical host. </para> </listitem> </varlistentry> Index: ctdb-2.3/include/ctdb_protocol.h =================================================================== --- ctdb-2.3.orig/include/ctdb_protocol.h +++ ctdb-2.3/include/ctdb_protocol.h @@ -24,7 +24,7 @@ #ifdef SOCKPATH #define CTDB_PATH SOCKPATH #else -#define CTDB_PATH "/tmp/ctdb.socket" +#define CTDB_PATH "/var/lib/ctdb/ctdb.socket" #endif /* default ctdb port number */ ++++++ ctdb-sysconfig-suse.template ++++++ ### Options to ctdbd. This is read by /etc/init.d/ctdb ## Path: Network/Ctdb ## Description: Ctdb location of the shared lock file ## Type: string ## Default: "" # you must specify the location of a shared lock file across all the # nodes. This must be on shared storage # there is no default CTDB_RECOVERY_LOCK="" ## Description: Ctdb public network interface ## Type: string ## Default: "" # when doing IP takeover you also may specify what network interface # to use by default for the public addresses. Otherwise you must # specify an interface on each line of the public addresses file # there is no default CTDB_PUBLIC_INTERFACE=eth0 ## Description: Location of the file with the public IP addresses ## Type: string ## Default: /etc/ctdb/public_addresses # Should ctdb do IP takeover? If it should, then specify a file # containing the list of public IP addresses that ctdb will manage # Note that these IPs must be different from those in $NODES above # there is no default. # The syntax is one line per public address of the form : # <ipaddress>/<netmask> <interface> # Example: 10.1.1.1/24 eth0 CTDB_PUBLIC_ADDRESSES=/etc/ctdb/public_addresses ## Description: Use single LVS public IP? ## Type: ip ## Default: "" # Should CTDB present the cluster using a single public ip address to clients # and multiplex clients across all CONNECTED nodes ? # This is based on LVS # When this is enabled, the entire cluster will present one single ip address # which clients will connect to. CTDB_LVS_PUBLIC_IP= ## Description: Ctdb manages to start and stop Samba? ## Type: yesno ## Default: yes # should ctdb manage starting/stopping the Samba service for you? # default is to not manage Samba CTDB_MANAGES_SAMBA=yes ## Description: Skip Samba share checks? # If there are very many shares it may not be feasible to check that all # of them are available during each monitoring interval. # In that case this check can be disabled ## Type: yesno ## Default: yes CTDB_SAMBA_SKIP_SHARE_CHECK=yes ## Description: Skip NFS share checks? # If there are very many shares it may not be feasible to check that all # of them are available during each monitoring interval. # In that case this check can be disabled ## Type: yesno ## Default: yes CTDB_NFS_SKIP_SHARE_CHECK=yes ## Description: Samba check ports? ## Type: integer ## Default: # specify which ports we should check that there is a daemon listening to # by default we use testparm and look in smb.conf to figure out. # CTDB_SAMBA_CHECK_PORTS="445" ### Must we remove the leading ^# and which default to set when we're happy ### with ctdb's default? ## Description: Manage winbind? ## Type: yesno ## Default: yes # should ctdb manage starting/stopping Winbind service? # if left comented out then it will be autodetected based on smb.conf CTDB_MANAGES_WINBIND=yes ## Description: Manage vsftpd? ## Type: yesno ## Default: yes # should ctdb manage starting/stopping the VSFTPD service CTDB_MANAGES_VSFTPD=yes ## Description: Manage iSCSI? ## Type: yesno ## Default: yes # should ctdb manage starting/stopping the ISCSI service CTDB_MANAGES_ISCSI=yes ## Description: Manage NFS? ## Type: yesno ## Default: yes # should ctdb manage starting/stopping the NFS service CTDB_MANAGES_NFS=yes ## Description: Manage Apache? ## Type: yesno ## Default: yes # should ctdb manage starting/stopping the Apache web server httpd? CTDB_MANAGES_HTTPD=yes ## Description: Init script style ## Type: string ## Default: "" # The init style (redhat/suse/ubuntu...) is usually auto-detected. # The names of init scripts of services managed by CTDB are set # based on the detected init style. You can override the init style # auto-detection here to explicitly use a scheme. This might be # useful when you have installed a packages (for instance samba # packages) with a different init script layout. # There is no default. CTDB_INIT_STYLE= ## Description: Samba smb services init script # The following is a smb specific Samba init script / service that you # can override from auto-detection. ## Type: string ## Default: smb CTDB_SERVICE_SMB=smb ## Description: Samba nmb services init script # The following is a nmb specific Samba init script / service that you # can override from auto-detection. ## Type: string ## Default: nmb CTDB_SERVICE_NMB=nmb ## Description: Samba winbind services init script # The following is a winbind specific Samba init script / service that you # can override from auto-detection. ## Type: string ## Default: winbind CTDB_SERVICE_WINBIND=winbind # you may wish to raise the file descriptor limit for ctdb # use a ulimit command here. ctdb needs one file descriptor per # connected client (ie. one per connected client in Samba) # ulimit -n 10000 ## Description: This file enumerates all nodes of the cluster ## Type: string ## Default: /etc/ctdb/nodes # the NODES file must be specified or ctdb won't start # it should contain a list of IPs that ctdb will use # it must be exactly the same on all cluster nodes # defaults to /etc/ctdb/nodes CTDB_NODES=/etc/ctdb/nodes ## Description: Script used to notify about node health changes ## Type: string ## Default: /etc/ctdb/notify.sh # a script to run when node health changes CTDB_NOTIFY_SCRIPT=/etc/ctdb/notify.sh ## Description: Database location ## Type: string ## Default: /var/lib/ctdb # the directory to put the local ctdb database files in # defaults to /var/lib/ctdb CTDB_DBDIR=/var/lib/ctdb ## Description: Persistent database location ## Type: string ## Default: /var/lib/ctdb/persistent # the directory to put the local persistent ctdb database files in # defaults to /var/lib/ctdb/persistent CTDB_DBDIR_PERSISTENT=/var/lib/ctdb/persistent ## Description: Event script directory location ## Type: string ## Default: /etc/ctdb/events.d # the directory where service specific event scripts are stored # defaults to /etc/ctdb/events.d CTDB_EVENT_SCRIPT_DIR=/etc/ctdb/events.d ## Description: Socket location ## Type: string ## Default: /var/lib/ctdb/ctdb.socket # the location of the local ctdb socket # defaults to /var/lib/ctdb/ctdb.socket CTDB_SOCKET=/var/lib/ctdb/ctdb.socket ## Description: Type of transport ## Type: string ## Default: tcp # what transport to use. Only tcp is currently supported # defaults to tcp CTDB_TRANSPORT="tcp" ## Description: Minimal amount of free memory ## Type: integer ## Default: 100 # When set, this variable makes ctdb monitor the amount of free memory # in the system (the second number in the buffers/cache output from free -m). # If the amount of free memory drops below this treshold the node will become # unhealthy and ctdb and all managed services will be shutdown. # Once this occurs, the administrator needs to find the reason for the OOM # situation, rectify it and restart ctdb with "service ctdb start" # The unit is MByte CTDB_MONITOR_FREE_MEMORY=100 ## Description: Start ctdb disabled? ## Type: yesno ## Default: yes # When set to yes, the CTDB node will start in DISABLED mode and not host # any public ip addresses. The administrator needs to explicitely enable # the node with "ctdb enable" CTDB_START_AS_DISABLED="yes" ## Description: RECMASTER capability. # By default all nodes are capable of both being LMASTER for records and # also for taking the RECMASTER role and perform recovery. # These parameters can be used to disable these two roles on a node. # Note: If there are NO available nodes left in a cluster that can perform # the RECMASTER role, the cluster will not be able to recover from a failure # and will remain in RECOVERY mode until an RECMASTER capable node becomes # available. Same for LMASTER. # These parameters are useful for scenarios where you have one "remote" node # in a cluster and you do not want the remote node to be fully participating # in the cluster and slow things down. # For that case, set both roles to "no" for the remote node on the remote site # but leave the roles default to "yes" on the primary nodes in the central # datacentre. ## Type: yesno ## Default: yes CTDB_CAPABILITY_RECMASTER=yes ## Description: LMASTER capability. # By default all nodes are capable of both being LMASTER for records and # also for taking the RECMASTER role and perform recovery. # These parameters can be used to disable these two roles on a node. # Note: If there are NO available nodes left in a cluster that can perform # the RECMASTER role, the cluster will not be able to recover from a failure # and will remain in RECOVERY mode until an RECMASTER capable node becomes # available. Same for LMASTER. # These parameters are useful for scenarios where you have one "remote" node # in a cluster and you do not want the remote node to be fully participating # in the cluster and slow things down. # For that case, set both roles to "no" for the remote node on the remote site # but leave the roles default to "yes" on the primary nodes in the central # datacentre. ## Type: yesno ## Default: yes CTDB_CAPABILITY_LMASTER=yes # NAT-GW configuration # Some services running on nthe CTDB node may need to originate traffic to # remote servers before the node is assigned any IP addresses, # This is problematic since before the node has public addresses the node might # not be able to route traffic to the public networks. # One solution is to have static public addresses assigned with routing # in addition to the public address interfaces, thus guaranteeing that # a node always can route traffic to the external network. # This is the most simple solution but it uses up a large number of # additional ip addresses. # # A more complex solution is NAT-GW. # In this mode we only need one additional ip address for the cluster from # the exsternal public network. # One of the nodes in the cluster is elected to be hosting this ip address # so it can reach the external services. This node is also configured # to use NAT MASQUERADING for all traffic from the internal private network # to the external network. This node is the NAT-GW node. # # All other nodes are set up with a default rote with a metric of 10 to point # to the nat-gw node. # # The effect of this is that only when a node does not have a public address # and thus no proper routes to the external world it will instead # route all packets through the nat-gw node. # ## Description: NAT gateway public IP ## Type: ip ## Default: "" NATGW_PUBLIC_IP= ## Description: NAT gateway public interface ## Type: string ## Default: "" NATGW_PUBLIC_IFACE= ## Description: NAT gateway default gateway ## Type: ip ## Default: "" NATGW_DEFAULT_GATEWAY= ## Description: NAT gateway private interface ## Type: string ## Default: "" NATGW_PRIVATE_IFACE= ## Description: NAT gateway network ## Type: ip ## Default: "" NATGW_PRIVATE_NETWORK= ## Description: NAT gateway nodes ## Type: string ## Default: /etc/ctdb/natgw_nodes # NATGW_NODES is the list of nodes that belong to this natgw group. # You can have multiple natgw groups in one cluster but each node # can only belong to one single natgw group. NATGW_NODES=/etc/ctdb/natgw_nodes ## Description: Ctdb log file location ## Type: string ## Default: /var/log/ctdb/log.ctdb # where to log messages # the default is /var/log/ctdb/log.ctdb CTDB_LOGFILE=/var/log/ctdb/log.ctdb ## Description: Ctdb debug level ## Type: integer(0:10) ## Default: 2 # what debug level to run at. Higher means more verbose # the default is 2 CTDB_DEBUGLEVEL=2 ## Description: Ctdb any other option ## Type: string ## Default: "" # any other options you might want. Run ctdbd --help for a list CTDB_OPTIONS= -- To unsubscribe, e-mail: opensuse-commit+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-commit+help@opensuse.org