Hello community, here is the log from the commit of package xcb-util-keysyms for openSUSE:Factory checked in at 2014-10-07 18:23:40 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/xcb-util-keysyms (Old) and /work/SRC/openSUSE:Factory/.xcb-util-keysyms.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "xcb-util-keysyms" Changes: -------- --- /work/SRC/openSUSE:Factory/xcb-util-keysyms/xcb-util-keysyms.changes 2013-03-21 22:15:56.000000000 +0100 +++ /work/SRC/openSUSE:Factory/.xcb-util-keysyms.new/xcb-util-keysyms.changes 2014-10-07 18:23:41.000000000 +0200 @@ -1,0 +2,10 @@ +Fri Oct 3 16:38:43 UTC 2014 - tobias.johannes.klausmann@mni.thm.de + +- Update to version 0.4.0: + + Pick-up changes in m4 submodule as it's better to have all util repos at same m4 level. + + Remove old/outdated documentation crufts. + + Duplicate keycodes are unnecessary + + autogen.sh: verify that git submodules are initialized + + Fix handling of error connections + +------------------------------------------------------------------- Old: ---- xcb-util-keysyms-0.3.9.tar.bz2 New: ---- xcb-util-keysyms-0.4.0.tar.bz2 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ xcb-util-keysyms.spec ++++++ --- /var/tmp/diff_new_pack.aP7FEj/_old 2014-10-07 18:23:42.000000000 +0200 +++ /var/tmp/diff_new_pack.aP7FEj/_new 2014-10-07 18:23:42.000000000 +0200 @@ -1,7 +1,7 @@ # # spec file for package xcb-util-keysyms # -# Copyright (c) 2013 SUSE LINUX Products GmbH, Nuernberg, Germany. +# Copyright (c) 2014 SUSE LINUX Products GmbH, Nuernberg, Germany. # # All modifications and additions to the file contributed by third parties # remain the property of their copyright owners, unless otherwise agreed @@ -18,7 +18,7 @@ Name: xcb-util-keysyms %define lname libxcb-keysyms1 -Version: 0.3.9 +Version: 0.4.0 Release: 0 Summary: XCB utility module for X keycode constants and conversions License: MIT @@ -28,6 +28,7 @@ #Git-Clone: git://anongit.freedesktop.org/xcb/util-keysyms #Git-Web: http://cgit.freedesktop.org/xcb/util-keysyms/ Source: %name-%version.tar.bz2 +Source1: baselibs.conf BuildRoot: %{_tmppath}/%{name}-%{version}-build #git#BuildRequires: autoconf >= 2.59c, automake, libtool BuildRequires: pkgconfig ++++++ xcb-util-keysyms-0.3.9.tar.bz2 -> xcb-util-keysyms-0.4.0.tar.bz2 ++++++ ++++ 7514 lines of diff (skipped) ++++ retrying with extended exclude list diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xcb-util-keysyms-0.3.9/ChangeLog new/xcb-util-keysyms-0.4.0/ChangeLog --- old/xcb-util-keysyms-0.3.9/ChangeLog 2012-05-31 05:47:40.000000000 +0200 +++ new/xcb-util-keysyms-0.4.0/ChangeLog 2014-10-01 11:55:07.000000000 +0200 @@ -1,3 +1,90 @@ +commit 0e51ee5570a6a80bdf98770b975dfe8a57f4eeb1 +Author: Arnaud Fontaine <arnau@debian.org> +Date: Wed Sep 24 20:03:48 2014 +0900 + + Release 0.4.0 + +commit 79fc93047b97fc038a92b48dcd1ca0ec3896c9aa +Author: Arnaud Fontaine <arnau@debian.org> +Date: Wed Oct 1 12:05:30 2014 +0900 + + Remove old/outdated documentation crufts. + +commit 03a23b71e44ca73baae1b2da8d6783ee193b82c8 +Author: Arnaud Fontaine <arnau@debian.org> +Date: Wed Sep 24 20:01:47 2014 +0900 + + Pick-up changes in m4 submodule as it's better to have all util repos at same m4 level. + +commit ae88512d7f142a50a75a48ff52320e5e1f3ad236 +Author: Uli Schlachter <psychon@znc.in> +Date: Sat Nov 16 12:33:40 2013 +0100 + + Fix handling of error connections + + When an xcb_connection_t goes into an error state, all operations on it will + fail. This means that after a call to xcb_key_symbols_get_reply(), syms->u.reply + would still be a NULL pointer and that xcb_get_setup() returns a NULL pointer. + + The only way for xcb_get_setup() to return NULL is for an error connection, but + xcb_get_keyboard_mapping_reply() could also fail for other reasons. So to fix + this, all functions need to check for error connections and if syms->u.reply is + not NULL. + + This was tested with the following C code: + + #include <xcb_keysyms.h> + #include <stdio.h> + #include <stdlib.h> + + int main() + { + xcb_connection_t *c = xcb_connect(NULL, NULL); + xcb_key_symbols_t *syms = xcb_key_symbols_alloc(c); + /* The above sent a GetKeyboardMapping request. Let's now break the + * connection so that it cannot get the reply. + */ + uint32_t max = xcb_get_maximum_request_length(c); + xcb_screen_t *s = xcb_setup_roots_iterator(xcb_get_setup(c)).data; + size_t len = (max << 2) * 2; + void *p = malloc(len); + + printf("Sending request of length %d*2=%d\n", + xcb_get_maximum_request_length(c), len); + xcb_change_property(c, XCB_PROP_MODE_REPLACE, s->root, + XCB_ATOM_STRING, XCB_ATOM_STRING, 8, len, p); + free(p); + + if (!xcb_connection_has_error(c)) + puts("Connection did not break :("); + + /* Crash? */ + free(xcb_key_symbols_get_keycode(syms, 0xff14)); + + return 0; + } + + Reference: https://awesome.naquadah.org/bugs/index.php?do=details&task_id=1195 + Signed-off-by: Uli Schlachter <psychon@znc.in> + +commit 3d7b2ba8299cb2d0e2f5e58f61c1a60625f2d015 +Author: Bastien Dejean <nihilhill@gmail.com> +Date: Wed Jan 2 21:13:12 2013 +0100 + + Duplicate keycodes are unnecessary + + When multiple keysym matches occur on one keycode, we do not want to + return that keycode multiple times. + + Signed-off-by: Bastien Dejean <nihilhill@gmail.com> + Signed-off-by: Michael Stapelberg <michael+xcb@stapelberg.de> + +commit e527fdc914d4b4fa816ea9e563c6abf6505b39d3 +Author: Michael Stapelberg <michael@stapelberg.de> +Date: Wed Oct 10 09:09:38 2012 +0200 + + autogen.sh: verify that git submodules are initialized + commit 12fc61fbbdf1ca2df25281a7d8e00f2dab75d1c2 Author: Arnaud Fontaine <arnau@debian.org> Date: Wed May 30 21:07:38 2012 +0900 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xcb-util-keysyms-0.3.9/INSTALL new/xcb-util-keysyms-0.4.0/INSTALL --- old/xcb-util-keysyms-0.3.9/INSTALL 2012-05-31 05:47:40.000000000 +0200 +++ new/xcb-util-keysyms-0.4.0/INSTALL 2014-10-01 11:55:07.000000000 +0200 @@ -1,11 +1,13 @@ Installation Instructions ************************* -Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005, -2006, 2007, 2008 Free Software Foundation, Inc. +Copyright (C) 1994-1996, 1999-2002, 2004-2011 Free Software Foundation, +Inc. - This file is free documentation; the Free Software Foundation gives -unlimited permission to copy, distribute and modify it. + Copying and distribution of this file, with or without modification, +are permitted in any medium without royalty provided the copyright +notice and this notice are preserved. This file is offered as-is, +without warranty of any kind. Basic Installation ================== @@ -13,7 +15,11 @@ Briefly, the shell commands `./configure; make; make install' should configure, build, and install this package. The following more-detailed instructions are generic; see the `README' file for -instructions specific to this package. +instructions specific to this package. Some packages provide this +`INSTALL' file but do not implement all of the features documented +below. The lack of an optional feature in a given package is not +necessarily a bug. More recommendations for GNU packages can be found +in *note Makefile Conventions: (standards)Makefile Conventions. The `configure' shell script attempts to guess correct values for various system-dependent variables used during compilation. It uses @@ -42,7 +48,7 @@ you want to change it or regenerate `configure' using a newer version of `autoconf'. -The simplest way to compile this package is: + The simplest way to compile this package is: 1. `cd' to the directory containing the package's source code and type `./configure' to configure the package for your system. @@ -53,12 +59,22 @@ 2. Type `make' to compile the package. 3. Optionally, type `make check' to run any self-tests that come with - the package. + the package, generally using the just-built uninstalled binaries. 4. Type `make install' to install the programs and any data files and - documentation. + documentation. When installing into a prefix owned by root, it is + recommended that the package be configured and built as a regular + user, and only the `make install' phase executed with root + privileges. + + 5. Optionally, type `make installcheck' to repeat any self-tests, but + this time using the binaries in their final installed location. + This target does not install anything. Running this target as a + regular user, particularly if the prior `make install' required + root privileges, verifies that the installation completed + correctly. - 5. You can remove the program binaries and object files from the + 6. You can remove the program binaries and object files from the source code directory by typing `make clean'. To also remove the files that `configure' created (so you can compile the package for a different kind of computer), type `make distclean'. There is @@ -67,8 +83,15 @@ all sorts of other programs in order to regenerate files that came with the distribution. - 6. Often, you can also type `make uninstall' to remove the installed - files again. + 7. Often, you can also type `make uninstall' to remove the installed + files again. In practice, not all packages have tested that + uninstallation works correctly, even though it is required by the + GNU Coding Standards. + + 8. Some packages, particularly those that use Automake, provide `make + distcheck', which can by used by developers to test that all other + targets like `make install' and `make uninstall' work correctly. + This target is generally not run by end users. Compilers and Options ===================== @@ -93,7 +116,8 @@ own directory. To do this, you can use GNU `make'. `cd' to the directory where you want the object files and executables to go and run the `configure' script. `configure' automatically checks for the -source code in the directory that `configure' is in and in `..'. +source code in the directory that `configure' is in and in `..'. This +is known as a "VPATH" build. With a non-GNU `make', it is safer to compile the package for one architecture at a time in the source code directory. After you have @@ -120,7 +144,8 @@ By default, `make install' installs the package's commands under `/usr/local/bin', include files under `/usr/local/include', etc. You can specify an installation prefix other than `/usr/local' by giving -`configure' the option `--prefix=PREFIX'. +`configure' the option `--prefix=PREFIX', where PREFIX must be an +absolute file name. You can specify separate installation prefixes for architecture-specific files and architecture-independent files. If you @@ -131,15 +156,46 @@ In addition, if you use an unusual directory layout you can give options like `--bindir=DIR' to specify different values for particular kinds of files. Run `configure --help' for a list of the directories -you can set and what kinds of files go in them. +you can set and what kinds of files go in them. In general, the +default for these options is expressed in terms of `${prefix}', so that +specifying just `--prefix' will affect all of the other directory +specifications that were not explicitly provided. + + The most portable way to affect installation locations is to pass the +correct locations to `configure'; however, many packages provide one or +both of the following shortcuts of passing variable assignments to the +`make install' command line to change installation locations without +having to reconfigure or recompile. + + The first method involves providing an override variable for each +affected directory. For example, `make install +prefix=/alternate/directory' will choose an alternate location for all +directory configuration variables that were expressed in terms of +`${prefix}'. Any directories that were specified during `configure', +but not in terms of `${prefix}', must each be overridden at install +time for the entire installation to be relocated. The approach of +makefile variable overrides for each directory variable is required by +the GNU Coding Standards, and ideally causes no recompilation. +However, some platforms have known limitations with the semantics of +shared libraries that end up requiring recompilation when using this +method, particularly noticeable in packages that use GNU Libtool. + + The second method involves providing the `DESTDIR' variable. For +example, `make install DESTDIR=/alternate/directory' will prepend +`/alternate/directory' before all installation names. The approach of +`DESTDIR' overrides is not required by the GNU Coding Standards, and +does not work on platforms that have drive letters. On the other hand, +it does better at avoiding recompilation issues, and works well even +when some directory options were not specified in terms of `${prefix}' +at `configure' time. + +Optional Features +================= If the package supports it, you can cause programs to be installed with an extra prefix or suffix on their names by giving `configure' the option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. -Optional Features -================= - Some packages pay attention to `--enable-FEATURE' options to `configure', where FEATURE indicates an optional part of the package. They may also pay attention to `--with-PACKAGE' options, where PACKAGE @@ -152,6 +208,13 @@ you can use the `configure' options `--x-includes=DIR' and `--x-libraries=DIR' to specify their locations. + Some packages offer the ability to configure how verbose the +execution of `make' will be. For these packages, running `./configure +--enable-silent-rules' sets the default to minimal output, which can be +overridden with `make V=1'; while running `./configure +--disable-silent-rules' sets the default to verbose, which can be +overridden with `make V=0'. + Particular systems ================== @@ -159,10 +222,15 @@ CC is not installed, it is recommended to use the following options in order to use an ANSI C compiler: - ./configure CC="cc -Ae" + ./configure CC="cc -Ae -D_XOPEN_SOURCE=500" and if that doesn't work, install pre-built binaries of GCC for HP-UX. + HP-UX `make' updates targets which have the same time stamps as +their prerequisites, which makes it generally unusable when shipped +generated files such as `configure' are involved. Use GNU `make' +instead. + On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot parse its `<wchar.h>' header file. The option `-nodtk' can be used as a workaround. If GNU CC is not installed, it is therefore recommended @@ -174,6 +242,16 @@ ./configure CC="cc -nodtk" + On Solaris, don't put `/usr/ucb' early in your `PATH'. This +directory contains several dysfunctional programs; working variants of +these programs are available in `/usr/bin'. So, if you need `/usr/ucb' +in your `PATH', put it _after_ `/usr/bin'. + + On Haiku, software installed for all users goes in `/boot/common', +not `/usr/local'. It is recommended to use the following options: + + ./configure --prefix=/boot/common + Specifying the System Type ========================== @@ -189,7 +267,8 @@ where SYSTEM can have one of these forms: - OS KERNEL-OS + OS + KERNEL-OS See the file `config.sub' for the possible values of each field. If `config.sub' isn't included in this package, then this package doesn't @@ -277,7 +356,7 @@ `configure' can determine that directory automatically. `--prefix=DIR' - Use DIR as the installation prefix. *Note Installation Names:: + Use DIR as the installation prefix. *note Installation Names:: for more details, including other options available for fine-tuning the installation locations. diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xcb-util-keysyms-0.3.9/NEWS new/xcb-util-keysyms-0.4.0/NEWS --- old/xcb-util-keysyms-0.3.9/NEWS 2012-05-30 14:07:22.000000000 +0200 +++ new/xcb-util-keysyms-0.4.0/NEWS 2014-10-01 05:09:54.000000000 +0200 @@ -1,3 +1,9 @@ +Release 0.4.0 (2014-10-01) +========================== + +- Duplicate keycodes are unnecessary. +- Fix handling of error connections. + Release 0.3.9 (2012-05-30) ========================== diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xcb-util-keysyms-0.3.9/autogen.sh new/xcb-util-keysyms-0.4.0/autogen.sh --- old/xcb-util-keysyms-0.3.9/autogen.sh 2011-04-14 04:44:19.000000000 +0200 +++ new/xcb-util-keysyms-0.4.0/autogen.sh 2013-08-12 11:55:35.000000000 +0200 @@ -6,6 +6,21 @@ ORIGDIR=`pwd` cd $srcdir +# If this is a git checkout, verify that the submodules are initialized, +# otherwise autotools will just fail with an unhelpful error message. +if [ -d ".git" ] && [ -r ".gitmodules" ] +then + # If git is not in PATH, this will not return 0, thus not keeping us + # from building. Since the message is worthless when git is not + # installed, this is what we want. + if git submodule status 2>/dev/null | grep -q '^-' + then + echo "You have uninitialized git submodules." >&2 + echo "Please run: git submodule update --init" >&2 + exit 1 + fi +fi + autoreconf -v --install || exit 1 cd $ORIGDIR || exit $? diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xcb-util-keysyms-0.3.9/compile new/xcb-util-keysyms-0.4.0/compile --- old/xcb-util-keysyms-0.3.9/compile 1970-01-01 01:00:00.000000000 +0100 +++ new/xcb-util-keysyms-0.4.0/compile 2014-10-01 11:55:04.000000000 +0200 @@ -0,0 +1,347 @@ +#! /bin/sh +# Wrapper for compilers which do not understand '-c -o'. + +scriptversion=2012-10-14.11; # UTC + +# Copyright (C) 1999-2013 Free Software Foundation, Inc. +# Written by Tom Tromey <tromey@cygnus.com>. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# This file is maintained in Automake, please report +# bugs to <bug-automake@gnu.org> or send patches to +# <automake-patches@gnu.org>. + +nl=' +' + +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent tools from complaining about whitespace usage. +IFS=" "" $nl" + +file_conv= + +# func_file_conv build_file lazy +# Convert a $build file to $host form and store it in $file +# Currently only supports Windows hosts. If the determined conversion +# type is listed in (the comma separated) LAZY, no conversion will +# take place. +func_file_conv () +{ + file=$1 + case $file in + / | /[!/]*) # absolute file, and not a UNC file + if test -z "$file_conv"; then + # lazily determine how to convert abs files + case `uname -s` in + MINGW*) + file_conv=mingw + ;; + CYGWIN*) + file_conv=cygwin + ;; + *) + file_conv=wine + ;; + esac + fi + case $file_conv/,$2, in + *,$file_conv,*) + ;; + mingw/*) + file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'` + ;; + cygwin/*) + file=`cygpath -m "$file" || echo "$file"` + ;; + wine/*) + file=`winepath -w "$file" || echo "$file"` + ;; + esac + ;; + esac +} + +# func_cl_dashL linkdir +# Make cl look for libraries in LINKDIR +func_cl_dashL () +{ + func_file_conv "$1" + if test -z "$lib_path"; then + lib_path=$file + else + lib_path="$lib_path;$file" + fi + linker_opts="$linker_opts -LIBPATH:$file" +} + +# func_cl_dashl library +# Do a library search-path lookup for cl +func_cl_dashl () +{ + lib=$1 + found=no + save_IFS=$IFS + IFS=';' + for dir in $lib_path $LIB + do + IFS=$save_IFS + if $shared && test -f "$dir/$lib.dll.lib"; then + found=yes + lib=$dir/$lib.dll.lib + break + fi + if test -f "$dir/$lib.lib"; then + found=yes + lib=$dir/$lib.lib + break + fi + if test -f "$dir/lib$lib.a"; then + found=yes + lib=$dir/lib$lib.a + break + fi + done + IFS=$save_IFS + + if test "$found" != yes; then + lib=$lib.lib + fi +} + +# func_cl_wrapper cl arg... +# Adjust compile command to suit cl +func_cl_wrapper () +{ + # Assume a capable shell + lib_path= + shared=: + linker_opts= + for arg + do + if test -n "$eat"; then + eat= + else + case $1 in + -o) + # configure might choose to run compile as 'compile cc -o foo foo.c'. + eat=1 + case $2 in + *.o | *.[oO][bB][jJ]) + func_file_conv "$2" + set x "$@" -Fo"$file" + shift + ;; + *) + func_file_conv "$2" + set x "$@" -Fe"$file" + shift + ;; + esac + ;; + -I) + eat=1 + func_file_conv "$2" mingw + set x "$@" -I"$file" + shift + ;; + -I*) + func_file_conv "${1#-I}" mingw + set x "$@" -I"$file" + shift + ;; + -l) + eat=1 + func_cl_dashl "$2" + set x "$@" "$lib" + shift + ;; + -l*) + func_cl_dashl "${1#-l}" + set x "$@" "$lib" + shift + ;; + -L) + eat=1 + func_cl_dashL "$2" + ;; + -L*) + func_cl_dashL "${1#-L}" + ;; + -static) + shared=false + ;; + -Wl,*) + arg=${1#-Wl,} + save_ifs="$IFS"; IFS=',' + for flag in $arg; do + IFS="$save_ifs" + linker_opts="$linker_opts $flag" + done + IFS="$save_ifs" + ;; + -Xlinker) + eat=1 + linker_opts="$linker_opts $2" + ;; + -*) + set x "$@" "$1" + shift + ;; + *.cc | *.CC | *.cxx | *.CXX | *.[cC]++) + func_file_conv "$1" + set x "$@" -Tp"$file" + shift + ;; + *.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO]) + func_file_conv "$1" mingw + set x "$@" "$file" + shift + ;; + *) + set x "$@" "$1" + shift + ;; + esac + fi + shift + done + if test -n "$linker_opts"; then + linker_opts="-link$linker_opts" + fi + exec "$@" $linker_opts + exit 1 +} + +eat= + +case $1 in + '') + echo "$0: No command. Try '$0 --help' for more information." 1>&2 + exit 1; + ;; + -h | --h*) + cat <<\EOF +Usage: compile [--help] [--version] PROGRAM [ARGS] + +Wrapper for compilers which do not understand '-c -o'. +Remove '-o dest.o' from ARGS, run PROGRAM with the remaining +arguments, and rename the output as expected. + +If you are trying to build a whole package this is not the +right script to run: please start by reading the file 'INSTALL'. + +Report bugs to <bug-automake@gnu.org>. +EOF + exit $? + ;; + -v | --v*) + echo "compile $scriptversion" + exit $? + ;; + cl | *[/\\]cl | cl.exe | *[/\\]cl.exe ) + func_cl_wrapper "$@" # Doesn't return... + ;; +esac + +ofile= +cfile= + +for arg +do + if test -n "$eat"; then + eat= + else + case $1 in + -o) + # configure might choose to run compile as 'compile cc -o foo foo.c'. + # So we strip '-o arg' only if arg is an object. + eat=1 + case $2 in + *.o | *.obj) + ofile=$2 + ;; + *) + set x "$@" -o "$2" + shift + ;; + esac + ;; + *.c) + cfile=$1 + set x "$@" "$1" + shift + ;; + *) + set x "$@" "$1" + shift + ;; + esac + fi + shift +done + +if test -z "$ofile" || test -z "$cfile"; then + # If no '-o' option was seen then we might have been invoked from a + # pattern rule where we don't need one. That is ok -- this is a + # normal compilation that the losing compiler can handle. If no + # '.c' file was seen then we are probably linking. That is also + # ok. + exec "$@" +fi + +# Name of file we expect compiler to create. +cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'` + +# Create the lock directory. +# Note: use '[/\\:.-]' here to ensure that we don't use the same name +# that we are using for the .o file. Also, base the name on the expected +# object file name, since that is what matters with a parallel build. +lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d +while true; do + if mkdir "$lockdir" >/dev/null 2>&1; then + break + fi + sleep 1 +done +# FIXME: race condition here if user kills between mkdir and trap. +trap "rmdir '$lockdir'; exit 1" 1 2 15 + +# Run the compile. +"$@" +ret=$? + +if test -f "$cofile"; then + test "$cofile" = "$ofile" || mv "$cofile" "$ofile" +elif test -f "${cofile}bj"; then + test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile" +fi + +rmdir "$lockdir" +exit $ret + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xcb-util-keysyms-0.3.9/configure.ac new/xcb-util-keysyms-0.4.0/configure.ac --- old/xcb-util-keysyms-0.3.9/configure.ac 2012-05-30 14:06:40.000000000 +0200 +++ new/xcb-util-keysyms-0.4.0/configure.ac 2014-10-01 05:09:54.000000000 +0200 @@ -1,5 +1,5 @@ AC_PREREQ(2.59c) -AC_INIT([xcb-util-keysyms],0.3.9,[xcb@lists.freedesktop.org]) +AC_INIT([xcb-util-keysyms],0.4.0,[xcb@lists.freedesktop.org]) AC_CONFIG_SRCDIR([Makefile.am]) AC_CONFIG_MACRO_DIR([m4]) AM_INIT_AUTOMAKE([foreign dist-bzip2]) @@ -11,5 +11,4 @@ AC_OUTPUT([Makefile keysyms/Makefile keysyms/xcb-keysyms.pc - xcb_util_intro ]) diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xcb-util-keysyms-0.3.9/keysyms/keysyms.c new/xcb-util-keysyms-0.4.0/keysyms/keysyms.c --- old/xcb-util-keysyms-0.3.9/keysyms/keysyms.c 2012-01-20 11:13:22.000000000 +0100 +++ new/xcb-util-keysyms-0.4.0/keysyms/keysyms.c 2014-06-11 10:47:41.000000000 +0200 @@ -77,7 +77,7 @@ xcb_keycode_t min_keycode; xcb_keycode_t max_keycode; - if (!c) + if (!c || xcb_connection_has_error(c)) return NULL; syms = malloc (sizeof (xcb_key_symbols_t)); @@ -198,10 +198,13 @@ xcb_keycode_t max_keycode; int per; - if (!syms) + if (!syms || xcb_connection_has_error(syms->c)) return keysym_null; xcb_key_symbols_get_reply (syms, NULL); + + if (!syms->u.reply) + return keysym_null; keysyms = xcb_get_keyboard_mapping_keysyms (syms->u.reply); min_keycode = xcb_get_setup (syms->c)->min_keycode; @@ -245,14 +248,17 @@ int j, nresult = 0; xcb_keycode_t i, min, max, *result = NULL, *result_np = NULL; - if(syms) + if(syms && !xcb_connection_has_error(syms->c)) { xcb_key_symbols_get_reply (syms, NULL); min = xcb_get_setup(syms->c)->min_keycode; max = xcb_get_setup(syms->c)->max_keycode; - for(j = 0; j < syms->u.reply->keysyms_per_keycode; j++) - for(i = min; i && i <= max; i++) + if (!syms->u.reply) + return NULL; + + for(i = min; i && i <= max; i++) + for(j = 0; j < syms->u.reply->keysyms_per_keycode; j++) { ks = xcb_key_symbols_get_keysym(syms, i, j); if(ks == keysym) @@ -270,6 +276,7 @@ result = result_np; result[nresult - 1] = i; result[nresult] = XCB_NO_SYMBOL; + break; } } } @@ -297,7 +304,7 @@ xcb_refresh_keyboard_mapping (xcb_key_symbols_t *syms, xcb_mapping_notify_event_t *event) { - if (event->request == XCB_MAPPING_KEYBOARD && syms) { + if (event->request == XCB_MAPPING_KEYBOARD && syms && !xcb_connection_has_error(syms->c)) { if (syms->tag == TAG_VALUE) { xcb_keycode_t min_keycode; xcb_keycode_t max_keycode; diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xcb-util-keysyms-0.3.9/m4/libtool.m4 new/xcb-util-keysyms-0.4.0/m4/libtool.m4 --- old/xcb-util-keysyms-0.3.9/m4/libtool.m4 2012-05-31 05:47:25.000000000 +0200 +++ new/xcb-util-keysyms-0.4.0/m4/libtool.m4 2014-10-01 11:54:59.000000000 +0200 @@ -1312,7 +1312,7 @@ rm -rf conftest* ;; -x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ +x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \ s390*-*linux*|s390*-*tpf*|sparc*-*linux*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext @@ -1324,9 +1324,19 @@ LD="${LD-ld} -m elf_i386_fbsd" ;; x86_64-*linux*) - LD="${LD-ld} -m elf_i386" + case `/usr/bin/file conftest.o` in + *x86-64*) + LD="${LD-ld} -m elf32_x86_64" + ;; + *) + LD="${LD-ld} -m elf_i386" + ;; + esac + ;; + powerpc64le-*) + LD="${LD-ld} -m elf32lppclinux" ;; - ppc64-*linux*|powerpc64-*linux*) + powerpc64-*) LD="${LD-ld} -m elf32ppclinux" ;; s390x-*linux*) @@ -1345,7 +1355,10 @@ x86_64-*linux*) LD="${LD-ld} -m elf_x86_64" ;; - ppc*-*linux*|powerpc*-*linux*) + powerpcle-*) + LD="${LD-ld} -m elf64lppc" + ;; + powerpc-*) LD="${LD-ld} -m elf64ppc" ;; s390*-*linux*|s390*-*tpf*) @@ -1688,7 +1701,8 @@ ;; *) lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` - if test -n "$lt_cv_sys_max_cmd_len"; then + if test -n "$lt_cv_sys_max_cmd_len" && \ + test undefined != "$lt_cv_sys_max_cmd_len"; then lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` else @@ -2512,17 +2526,6 @@ esac ;; -gnu*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - haiku*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no @@ -2639,7 +2642,7 @@ ;; # This must be glibc/ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) +linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no @@ -3255,10 +3258,6 @@ fi ;; -gnu*) - lt_cv_deplibs_check_method=pass_all - ;; - haiku*) lt_cv_deplibs_check_method=pass_all ;; @@ -3297,7 +3296,7 @@ ;; # This must be glibc/ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) +linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) lt_cv_deplibs_check_method=pass_all ;; @@ -4049,7 +4048,7 @@ ;; esac ;; - linux* | k*bsd*-gnu | kopensolaris*-gnu) + linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) case $cc_basename in KCC*) # KAI C++ Compiler @@ -4348,7 +4347,7 @@ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; - linux* | k*bsd*-gnu | kopensolaris*-gnu) + linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) case $cc_basename in # old Intel for x86_64 which still supported -KPIC. ecc*) @@ -6241,9 +6240,6 @@ _LT_TAGVAR(ld_shlibs, $1)=yes ;; - gnu*) - ;; - haiku*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(link_all_deplibs, $1)=yes @@ -6405,7 +6401,7 @@ _LT_TAGVAR(inherit_rpath, $1)=yes ;; - linux* | k*bsd*-gnu | kopensolaris*-gnu) + linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) case $cc_basename in KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xcb-util-keysyms-0.3.9/m4/xcb_util_common.m4 new/xcb-util-keysyms-0.4.0/m4/xcb_util_common.m4 --- old/xcb-util-keysyms-0.3.9/m4/xcb_util_common.m4 2011-04-14 04:44:20.000000000 +0200 +++ new/xcb-util-keysyms-0.4.0/m4/xcb_util_common.m4 2014-09-24 13:01:14.000000000 +0200 @@ -2,7 +2,7 @@ # ----------------------------------------------------------------- # # Defines default options for xcb-util libraries. xorg/util/macros >= -# 1.6.0 is required for cross-platform compiler flags and to build +# 1.16.0 is required for cross-platform compiler flags and to build # library documentation. # AC_DEFUN([XCB_UTIL_COMMON], [ @@ -35,9 +35,9 @@ # Call macros from Xorg util-macros m4_ifndef([XORG_MACROS_VERSION], - [m4_fatal([must install xorg-macros 1.6.0 or later before running autoconf/autogen])]) + [m4_fatal([must install xorg-macros 1.16.0 or later before running autoconf/autogen])]) -XORG_MACROS_VERSION([1.6.0]) +XORG_MACROS_VERSION([1.16.0]) XORG_DEFAULT_OPTIONS XORG_ENABLE_DEVEL_DOCS XORG_WITH_DOXYGEN diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xcb-util-keysyms-0.3.9/missing new/xcb-util-keysyms-0.4.0/missing --- old/xcb-util-keysyms-0.3.9/missing 2012-05-31 05:47:34.000000000 +0200 +++ new/xcb-util-keysyms-0.4.0/missing 2014-10-01 11:55:04.000000000 +0200 @@ -1,11 +1,10 @@ #! /bin/sh -# Common stub for a few missing GNU programs while installing. +# Common wrapper for a few potentially missing GNU programs. -scriptversion=2012-01-06.13; # UTC +scriptversion=2013-10-28.13; # UTC -# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006, -# 2008, 2009, 2010, 2011, 2012 Free Software Foundation, Inc. -# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996. +# Copyright (C) 1996-2013 Free Software Foundation, Inc. +# Originally written by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -26,68 +25,40 @@ # the same distribution terms that you use for the rest of that program. if test $# -eq 0; then - echo 1>&2 "Try \`$0 --help' for more information" + echo 1>&2 "Try '$0 --help' for more information" exit 1 fi -run=: -sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p' -sed_minuso='s/.* -o \([^ ]*\).*/\1/p' - -# In the cases where this matters, `missing' is being run in the -# srcdir already. -if test -f configure.ac; then - configure_ac=configure.ac -else - configure_ac=configure.in -fi +case $1 in -msg="missing on your system" + --is-lightweight) + # Used by our autoconf macros to check whether the available missing + # script is modern enough. + exit 0 + ;; -case $1 in ---run) - # Try to run requested program, and just exit if it succeeds. - run= - shift - "$@" && exit 0 - # Exit code 63 means version mismatch. This often happens - # when the user try to use an ancient version of a tool on - # a file that requires a minimum version. In this case we - # we should proceed has if the program had been absent, or - # if --run hadn't been passed. - if test $? = 63; then - run=: - msg="probably too old" - fi - ;; + --run) + # Back-compat with the calling convention used by older automake. + shift + ;; -h|--h|--he|--hel|--help) echo "\ $0 [OPTION]... PROGRAM [ARGUMENT]... -Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an -error status if there is no known handling for PROGRAM. +Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due +to PROGRAM being missing or too old. Options: -h, --help display this help and exit -v, --version output version information and exit - --run try to run the given command, and emulate it if it fails Supported PROGRAM values: - aclocal touch file \`aclocal.m4' - autoconf touch file \`configure' - autoheader touch file \`config.h.in' - autom4te touch the output file, or create a stub one - automake touch all \`Makefile.in' files - bison create \`y.tab.[ch]', if possible, from existing .[ch] - flex create \`lex.yy.c', if possible, from existing .c - help2man touch the output file - lex create \`lex.yy.c', if possible, from existing .c - makeinfo touch the output file - yacc create \`y.tab.[ch]', if possible, from existing .[ch] + aclocal autoconf autoheader autom4te automake makeinfo + bison yacc flex lex help2man -Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and -\`g' are ignored when checking the name. +Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and +'g' are ignored when checking the name. Send bug reports to <bug-automake@gnu.org>." exit $? @@ -99,228 +70,141 @@ ;; -*) - echo 1>&2 "$0: Unknown \`$1' option" - echo 1>&2 "Try \`$0 --help' for more information" + echo 1>&2 "$0: unknown '$1' option" + echo 1>&2 "Try '$0 --help' for more information" exit 1 ;; esac -# normalize program name to check for. -program=`echo "$1" | sed ' - s/^gnu-//; t - s/^gnu//; t - s/^g//; t'` - -# Now exit if we have it, but it failed. Also exit now if we -# don't have it and --version was passed (most likely to detect -# the program). This is about non-GNU programs, so use $1 not -# $program. -case $1 in - lex*|yacc*) - # Not GNU programs, they don't have --version. - ;; +# Run the given program, remember its exit status. +"$@"; st=$? - *) - if test -z "$run" && ($1 --version) > /dev/null 2>&1; then - # We have it, but it failed. - exit 1 - elif test "x$2" = "x--version" || test "x$2" = "x--help"; then - # Could not run --version or --help. This is probably someone - # running `$TOOL --version' or `$TOOL --help' to check whether - # $TOOL exists and not knowing $TOOL uses missing. - exit 1 - fi - ;; -esac - -# If it does not exist, or fails to run (possibly an outdated version), -# try to emulate it. -case $program in - aclocal*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`acinclude.m4' or \`${configure_ac}'. You might want - to install the \`Automake' and \`Perl' packages. Grab them from - any GNU archive site." - touch aclocal.m4 - ;; - - autoconf*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`${configure_ac}'. You might want to install the - \`Autoconf' and \`GNU m4' packages. Grab them from any GNU - archive site." - touch configure - ;; - - autoheader*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`acconfig.h' or \`${configure_ac}'. You might want - to install the \`Autoconf' and \`GNU m4' packages. Grab them - from any GNU archive site." - files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` - test -z "$files" && files="config.h" - touch_files= - for f in $files; do - case $f in - *:*) touch_files="$touch_files "`echo "$f" | - sed -e 's/^[^:]*://' -e 's/:.*//'`;; - *) touch_files="$touch_files $f.in";; - esac - done - touch $touch_files - ;; +# If it succeeded, we are done. +test $st -eq 0 && exit 0 - automake*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. - You might want to install the \`Automake' and \`Perl' packages. - Grab them from any GNU archive site." - find . -type f -name Makefile.am -print | - sed 's/\.am$/.in/' | - while read f; do touch "$f"; done - ;; - - autom4te*) - echo 1>&2 "\ -WARNING: \`$1' is needed, but is $msg. - You might have modified some files without having the - proper tools for further handling them. - You can get \`$1' as part of \`Autoconf' from any GNU - archive site." - - file=`echo "$*" | sed -n "$sed_output"` - test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` - if test -f "$file"; then - touch $file - else - test -z "$file" || exec >$file - echo "#! /bin/sh" - echo "# Created by GNU Automake missing as a replacement of" - echo "# $ $@" - echo "exit 0" - chmod +x $file - exit 1 - fi - ;; - - bison*|yacc*) - echo 1>&2 "\ -WARNING: \`$1' $msg. You should only need it if - you modified a \`.y' file. You may need the \`Bison' package - in order for those modifications to take effect. You can get - \`Bison' from any GNU archive site." - rm -f y.tab.c y.tab.h - if test $# -ne 1; then - eval LASTARG=\${$#} - case $LASTARG in - *.y) - SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` - if test -f "$SRCFILE"; then - cp "$SRCFILE" y.tab.c - fi - SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` - if test -f "$SRCFILE"; then - cp "$SRCFILE" y.tab.h - fi - ;; - esac - fi - if test ! -f y.tab.h; then - echo >y.tab.h - fi - if test ! -f y.tab.c; then - echo 'main() { return 0; }' >y.tab.c - fi - ;; - - lex*|flex*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified a \`.l' file. You may need the \`Flex' package - in order for those modifications to take effect. You can get - \`Flex' from any GNU archive site." - rm -f lex.yy.c - if test $# -ne 1; then - eval LASTARG=\${$#} - case $LASTARG in - *.l) - SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` - if test -f "$SRCFILE"; then - cp "$SRCFILE" lex.yy.c - fi - ;; - esac - fi - if test ! -f lex.yy.c; then - echo 'main() { return 0; }' >lex.yy.c - fi - ;; - - help2man*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified a dependency of a manual page. You may need the - \`Help2man' package in order for those modifications to take - effect. You can get \`Help2man' from any GNU archive site." - - file=`echo "$*" | sed -n "$sed_output"` - test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` - if test -f "$file"; then - touch $file - else - test -z "$file" || exec >$file - echo ".ab help2man is required to generate this page" - exit $? - fi - ;; - - makeinfo*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified a \`.texi' or \`.texinfo' file, or any other file - indirectly affecting the aspect of the manual. The spurious - call might also be the consequence of using a buggy \`make' (AIX, - DU, IRIX). You might want to install the \`Texinfo' package or - the \`GNU make' package. Grab either from any GNU archive site." - # The file to touch is that specified with -o ... - file=`echo "$*" | sed -n "$sed_output"` - test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` - if test -z "$file"; then - # ... or it is the one specified with @setfilename ... - infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` - file=`sed -n ' - /^@setfilename/{ - s/.* \([^ ]*\) *$/\1/ - p - q - }' $infile` - # ... or it is derived from the source name (dir/f.texi becomes f.info) - test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info - fi - # If the file does not exist, the user really needs makeinfo; - # let's fail without touching anything. - test -f $file || exit 1 - touch $file - ;; - - *) - echo 1>&2 "\ -WARNING: \`$1' is needed, and is $msg. - You might have modified some files without having the - proper tools for further handling them. Check the \`README' file, - it often tells you about the needed prerequisites for installing - this package. You may also peek at any GNU archive site, in case - some other package would contain this missing \`$1' program." - exit 1 - ;; -esac +# Also exit now if we it failed (or wasn't found), and '--version' was +# passed; such an option is passed most likely to detect whether the +# program is present and works. +case $2 in --version|--help) exit $st;; esac + +# Exit code 63 means version mismatch. This often happens when the user +# tries to use an ancient version of a tool on a file that requires a +# minimum version. +if test $st -eq 63; then + msg="probably too old" +elif test $st -eq 127; then + # Program was missing. + msg="missing on your system" +else + # Program was found and executed, but failed. Give up. + exit $st +fi -exit 0 +perl_URL=http://www.perl.org/ +flex_URL=http://flex.sourceforge.net/ +gnu_software_URL=http://www.gnu.org/software + +program_details () +{ + case $1 in + aclocal|automake) + echo "The '$1' program is part of the GNU Automake package:" + echo "<$gnu_software_URL/automake>" + echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:" + echo "<$gnu_software_URL/autoconf>" + echo "<$gnu_software_URL/m4/>" + echo "<$perl_URL>" + ;; + autoconf|autom4te|autoheader) + echo "The '$1' program is part of the GNU Autoconf package:" + echo "<$gnu_software_URL/autoconf/>" + echo "It also requires GNU m4 and Perl in order to run:" + echo "<$gnu_software_URL/m4/>" + echo "<$perl_URL>" + ;; + esac +} + +give_advice () +{ + # Normalize program name to check for. + normalized_program=`echo "$1" | sed ' + s/^gnu-//; t + s/^gnu//; t + s/^g//; t'` + + printf '%s\n' "'$1' is $msg." + + configure_deps="'configure.ac' or m4 files included by 'configure.ac'" + case $normalized_program in + autoconf*) + echo "You should only need it if you modified 'configure.ac'," + echo "or m4 files included by it." + program_details 'autoconf' + ;; + autoheader*) + echo "You should only need it if you modified 'acconfig.h' or" + echo "$configure_deps." + program_details 'autoheader' + ;; + automake*) + echo "You should only need it if you modified 'Makefile.am' or" + echo "$configure_deps." + program_details 'automake' + ;; + aclocal*) + echo "You should only need it if you modified 'acinclude.m4' or" + echo "$configure_deps." + program_details 'aclocal' + ;; + autom4te*) + echo "You might have modified some maintainer files that require" + echo "the 'autom4te' program to be rebuilt." + program_details 'autom4te' + ;; + bison*|yacc*) + echo "You should only need it if you modified a '.y' file." + echo "You may want to install the GNU Bison package:" + echo "<$gnu_software_URL/bison/>" + ;; + lex*|flex*) + echo "You should only need it if you modified a '.l' file." + echo "You may want to install the Fast Lexical Analyzer package:" + echo "<$flex_URL>" + ;; + help2man*) + echo "You should only need it if you modified a dependency" \ + "of a man page." + echo "You may want to install the GNU Help2man package:" + echo "<$gnu_software_URL/help2man/>" + ;; + makeinfo*) + echo "You should only need it if you modified a '.texi' file, or" + echo "any other file indirectly affecting the aspect of the manual." + echo "You might want to install the Texinfo package:" + echo "<$gnu_software_URL/texinfo/>" + echo "The spurious makeinfo call might also be the consequence of" + echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might" + echo "want to install GNU make:" + echo "<$gnu_software_URL/make/>" + ;; + *) + echo "You might have modified some files without having the proper" + echo "tools for further handling them. Check the 'README' file, it" + echo "often tells you about the needed prerequisites for installing" + echo "this package. You may also peek at any GNU archive site, in" + echo "case some other package contains this missing '$1' program." + ;; + esac +} + +give_advice "$1" | sed -e '1s/^/WARNING: /' \ + -e '2,$s/^/ /' >&2 + +# Propagate the correct exit status (expected to be 127 for a program +# not found, 63 for a program that failed due to version mismatch). +exit $st # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xcb-util-keysyms-0.3.9/xcb_util_intro.in new/xcb-util-keysyms-0.4.0/xcb_util_intro.in --- old/xcb-util-keysyms-0.3.9/xcb_util_intro.in 2011-04-14 04:44:19.000000000 +0200 +++ new/xcb-util-keysyms-0.4.0/xcb_util_intro.in 1970-01-01 01:00:00.000000000 +0100 @@ -1,24 +0,0 @@ -/** -@file -@brief XCB Utility functions - -These routines are used to facilitate the use of XCB in programs. -*/ - -/** - -@mainpage XCB Utility Documentation -@version @PACKAGE_VERSION@ -@author Ian Osgood <iano@quirkster.com> -@author Bart Massey <bart@cs.pdx.edu> -@author Jamey Sharp <jamey@minilop.net> -@author Josh Triplett <josh@freedesktop.org> -@author Keith Packard <keithp@keithp.com> -@author Vincent Torri <torri@iecn.u-nancy.fr> -@author Julien Danjou <julien@danjou.info> -@author Arnaud Fontaine <arnau@debian.org> -@date 2005-2008 - -@section intro What is available ? - -*/ -- To unsubscribe, e-mail: opensuse-commit+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-commit+help@opensuse.org