![](https://seccdn.libravatar.org/avatar/e2145bc5cf53dda95c308a3c75e8fef3.jpg?s=120&d=mm&r=g)
Hello community, here is the log from the commit of package system-config-printer for openSUSE:Factory checked in at 2015-05-16 07:13:52 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/system-config-printer (Old) and /work/SRC/openSUSE:Factory/.system-config-printer.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "system-config-printer" Changes: -------- --- /work/SRC/openSUSE:Factory/system-config-printer/system-config-printer.changes 2015-03-30 19:12:49.000000000 +0200 +++ /work/SRC/openSUSE:Factory/.system-config-printer.new/system-config-printer.changes 2015-05-16 07:13:53.000000000 +0200 @@ -1,0 +2,12 @@ +Fri May 15 07:33:33 UTC 2015 - dimstar@opensuse.org + +- Update to version 1.5.7: + + Test device ordering: hp beats dnssd and usb. + + Fixes for appdata file. + + Fixed traceback (lp#1213136). + + Set use_underline=True for previously-stock buttons + (lp#1210859). + + Increase bus settle time for usb_modeswitch devices + (lp#1206808). + +------------------------------------------------------------------- Old: ---- system-config-printer-1.5.6.tar.xz system-config-printer-1.5.6.tar.xz.sig New: ---- system-config-printer-1.5.7.tar.xz system-config-printer-1.5.7.tar.xz.sig ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ system-config-printer.spec ++++++ --- /var/tmp/diff_new_pack.Imvjb7/_old 2015-05-16 07:13:54.000000000 +0200 +++ /var/tmp/diff_new_pack.Imvjb7/_new 2015-05-16 07:13:54.000000000 +0200 @@ -25,7 +25,7 @@ %endif Name: system-config-printer -Version: 1.5.6 +Version: 1.5.7 Release: 0 Summary: A printer administration tool License: GPL-2.0+ ++++++ system-config-printer-1.5.6.tar.xz -> system-config-printer-1.5.7.tar.xz ++++++ ++++ 5428 lines of diff (skipped) ++++ retrying with extended exclude list diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/ChangeLog new/system-config-printer-1.5.7/ChangeLog --- old/system-config-printer-1.5.6/ChangeLog 2015-03-17 16:43:14.000000000 +0100 +++ new/system-config-printer-1.5.7/ChangeLog 2015-04-29 13:58:57.000000000 +0200 @@ -1,3 +1,32 @@ +2015-04-29 Tim Waugh <twaugh@redhat.com> + + Bumped version for 1.5.7 release. + + make pull-translations && make update-po + +2015-04-23 Tim Waugh <twaugh@redhat.com> + + Test device ordering. + hp beats dnssd and usb. + + Fixes for appdata file. + + Re-bootstrap. + + Fixes for appdata file. + +2015-04-21 Tim Waugh <twaugh@redhat.com> + + Fixed traceback (bug #1213136). + +2015-04-13 Tim Waugh <twaugh@redhat.com> + + Set use_underline=True for previously-stock buttons (bug #1210859). + +2015-04-01 Tim Waugh <twaugh@redhat.com> + + Increase bus settle time for usb_modeswitch devices (bug #1206808). + 2015-03-17 Tim Waugh <twaugh@redhat.com> Bumped version for release. diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/applet.py new/system-config-printer-1.5.7/applet.py --- old/system-config-printer-1.5.6/applet.py 2015-03-17 16:19:09.000000000 +0100 +++ new/system-config-printer-1.5.7/applet.py 2015-04-23 17:05:58.000000000 +0200 @@ -324,7 +324,7 @@ system_bus.add_signal_receiver (self.handle_dbus_signal, path=self.DBUS_PATH, dbus_interface=self.DBUS_IFACE) - except DBusException as e: + except dbus.DBusException as e: try: print ("%s: failed to add D-Bus signal receiver: %s" \ % (PROGRAM_NAME, e), file=sys.stderr) @@ -338,7 +338,7 @@ self.system_bus.remove_signal_receiver (self.handle_dbus_signal, path=self.DBUS_PATH, dbus_interface=self.DBUS_IFACE) - except DBusException as e: + except dbus.DBusException as e: try: print ("%s: failed to remove D-Bus signal receiver: %s" \ % (PROGRAM_NAME, e), file=sys.stderr) diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/config.py new/system-config-printer-1.5.7/config.py --- old/system-config-printer-1.5.6/config.py 2015-03-17 16:43:14.000000000 +0100 +++ new/system-config-printer-1.5.7/config.py 2015-04-29 13:58:56.000000000 +0200 @@ -22,7 +22,7 @@ datadir="/usr/local/share" localedir="/usr/local/share/locale" pkgdatadir="/usr/local/share/system-config-printer" -VERSION="1.5.6" +VERSION="1.5.7" PACKAGE="system-config-printer" DOWNLOADABLE_ONLYPPD=True DOWNLOADABLE_ONLYFREE=True diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/configure.ac new/system-config-printer-1.5.7/configure.ac --- old/system-config-printer-1.5.6/configure.ac 2015-03-17 16:42:57.000000000 +0100 +++ new/system-config-printer-1.5.7/configure.ac 2015-04-29 13:58:30.000000000 +0200 @@ -1,4 +1,4 @@ -AC_INIT(system-config-printer, 1.5.6) +AC_INIT(system-config-printer, 1.5.7) AC_CONFIG_SRCDIR(system-config-printer.py) AM_INIT_AUTOMAKE([dist-xz dist-bzip2 subdir-objects 1.6]) IT_PROG_INTLTOOL diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/Makefile.in.in new/system-config-printer-1.5.7/po/Makefile.in.in --- old/system-config-printer-1.5.6/po/Makefile.in.in 2015-03-17 16:43:09.000000000 +0100 +++ new/system-config-printer-1.5.7/po/Makefile.in.in 2015-04-23 17:05:58.000000000 +0200 @@ -33,8 +33,7 @@ datadir = @datadir@ datarootdir = @datarootdir@ libdir = @libdir@ -DATADIRNAME = @DATADIRNAME@ -itlocaledir = $(prefix)/$(DATADIRNAME)/locale +localedir = @localedir@ subdir = po install_sh = @install_sh@ # Automake >= 1.8 provides @mkdir_p@. @@ -80,7 +79,7 @@ .po.pox: $(MAKE) $(GETTEXT_PACKAGE).pot - $(MSGMERGE) $< $(GETTEXT_PACKAGE).pot -o $*.pox + $(MSGMERGE) $* $(GETTEXT_PACKAGE).pot -o $*.pox .po.mo: $(INTLTOOL_V_MSGFMT)$(MSGFMT) -o $@ $< @@ -108,7 +107,7 @@ install-data-yes: all linguas="$(USE_LINGUAS)"; \ for lang in $$linguas; do \ - dir=$(DESTDIR)$(itlocaledir)/$$lang/LC_MESSAGES; \ + dir=$(DESTDIR)$(localedir)/$$lang/LC_MESSAGES; \ $(mkdir_p) $$dir; \ if test -r $$lang.gmo; then \ $(INSTALL_DATA) $$lang.gmo $$dir/$(GETTEXT_PACKAGE).mo; \ @@ -142,8 +141,8 @@ uninstall: linguas="$(USE_LINGUAS)"; \ for lang in $$linguas; do \ - rm -f $(DESTDIR)$(itlocaledir)/$$lang/LC_MESSAGES/$(GETTEXT_PACKAGE).mo; \ - rm -f $(DESTDIR)$(itlocaledir)/$$lang/LC_MESSAGES/$(GETTEXT_PACKAGE).mo.m; \ + rm -f $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(GETTEXT_PACKAGE).mo; \ + rm -f $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(GETTEXT_PACKAGE).mo.m; \ done check: all $(GETTEXT_PACKAGE).pot diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/ar.po new/system-config-printer-1.5.7/po/ar.po --- old/system-config-printer-1.5.6/po/ar.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/ar.po 2015-04-29 13:55:13.000000000 +0200 @@ -30,7 +30,7 @@ "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=6; plural=n==0 ? 0 : n==1 ? 1 : n==2 ? 2 : n%100>=3 " "&& n%100<=10 ? 3 : n%100>=11 && n%100<=99 ? 4 : 5;\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/as.po new/system-config-printer-1.5.7/po/as.po --- old/system-config-printer-1.5.6/po/as.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/as.po 2015-04-29 13:55:13.000000000 +0200 @@ -19,7 +19,7 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/bg.po new/system-config-printer-1.5.7/po/bg.po --- old/system-config-printer-1.5.6/po/bg.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/bg.po 2015-04-29 13:55:13.000000000 +0200 @@ -24,7 +24,7 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/bn.po new/system-config-printer-1.5.7/po/bn.po --- old/system-config-printer-1.5.6/po/bn.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/bn.po 2015-04-29 13:55:13.000000000 +0200 @@ -25,7 +25,7 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/bn_IN.po new/system-config-printer-1.5.7/po/bn_IN.po --- old/system-config-printer-1.5.6/po/bn_IN.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/bn_IN.po 2015-04-29 13:55:13.000000000 +0200 @@ -21,7 +21,7 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/br.po new/system-config-printer-1.5.7/po/br.po --- old/system-config-printer-1.5.6/po/br.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/br.po 2015-04-29 13:55:13.000000000 +0200 @@ -20,7 +20,7 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n > 1);\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/bs.po new/system-config-printer-1.5.7/po/bs.po --- old/system-config-printer-1.5.6/po/bs.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/bs.po 2015-04-29 13:55:13.000000000 +0200 @@ -20,7 +20,7 @@ "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n" "%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/ca.po new/system-config-printer-1.5.7/po/ca.po --- old/system-config-printer-1.5.6/po/ca.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/ca.po 2015-04-29 13:55:13.000000000 +0200 @@ -16,7 +16,7 @@ "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: https://bugzilla.redhat.com/bugzilla\n" "POT-Creation-Date: 2015-03-17 15:19+0000\n" -"PO-Revision-Date: 2015-03-17 07:05-0400\n" +"PO-Revision-Date: 2015-04-02 07:36-0400\n" "Last-Translator: Robert Antoni Buj Gelonch <rbuj@fedoraproject.org>\n" "Language-Team: Catalan (http://www.transifex.com/projects/p/system-config-" "printer/language/ca/)\n" @@ -25,7 +25,7 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 @@ -55,7 +55,7 @@ #: ../troubleshoot/PrintTestPage.py:431 #, python-format msgid "There was an error during the CUPS operation: '%s'." -msgstr "S'ha produït un error durant l'operació del CUPS: «%s»." +msgstr "Hi va haver un error durant l'operació del CUPS: «%s»." #: ../asyncipp.py:581 ../authconn.py:311 msgid "Retry" @@ -126,7 +126,7 @@ #: ../errordialogs.py:84 #, python-format msgid "There was an HTTP error: %s." -msgstr "S'ha produït un error HTTP: %s" +msgstr "Hi va haver un error d'HTTP: %s" #: ../jobviewer.py:186 msgid "Delete Jobs" @@ -403,20 +403,20 @@ #, python-format msgid "There was a problem sending document `%s' (job %d) to the printer." msgstr "" -"Hi ha hagut un problema en enviar el document «%s» (treball %d) a la " +"Hi va haver un problema en enviar el document «%s» (treball %d) a la " "impressora." #: ../jobviewer.py:2053 #, python-format msgid "There was a problem processing document `%s' (job %d)." -msgstr "Hi ha hagut un problema en processar el document «%s» (treball %d)." +msgstr "Hi va haver un problema en processar el document «%s» (treball %d)." #. Give up and use the provided message untranslated. #: ../jobviewer.py:2060 #, python-format msgid "There was a problem printing document `%s' (job %d): `%s'." msgstr "" -"Hi ha hagut un problema en imprimir el document «%s» (treball %d): «%s»." +"Hi va haver un problema en imprimir el document «%s» (treball %d): «%s»." #: ../jobviewer.py:2067 ../jobviewer.py:2084 msgid "Print Error" @@ -1546,7 +1546,7 @@ #: ../printerproperties.py:1342 msgid "There was a problem connecting to the CUPS server." -msgstr "Hi ha hagut un problema en connectar-se al servidor CUPS." +msgstr "Hi va haver un problema en connectar al servidor CUPS." #: ../printerproperties.py:1439 #, python-format @@ -3341,7 +3341,7 @@ #: ../troubleshoot/Shrug.py:94 msgid "There was an error saving the file:" -msgstr "S'ha produït un error desant el fitxer:" +msgstr "Hi va haver un error en desar el fitxer:" #: ../troubleshoot/Welcome.py:45 msgid "Trouble-shooting Printing" diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/cs.po new/system-config-printer-1.5.7/po/cs.po --- old/system-config-printer-1.5.6/po/cs.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/cs.po 2015-04-29 13:55:13.000000000 +0200 @@ -24,7 +24,7 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/cy.po new/system-config-printer-1.5.7/po/cy.po --- old/system-config-printer-1.5.6/po/cy.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/cy.po 2015-04-29 13:55:14.000000000 +0200 @@ -20,7 +20,7 @@ "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=4; plural=(n==1) ? 0 : (n==2) ? 1 : (n != 8 && n != " "11) ? 2 : 3;\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/da.po new/system-config-printer-1.5.7/po/da.po --- old/system-config-printer-1.5.6/po/da.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/da.po 2015-04-29 13:55:14.000000000 +0200 @@ -19,7 +19,7 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/de.po new/system-config-printer-1.5.7/po/de.po --- old/system-config-printer-1.5.6/po/de.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/de.po 2015-04-29 13:55:14.000000000 +0200 @@ -34,7 +34,7 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/el.po new/system-config-printer-1.5.7/po/el.po --- old/system-config-printer-1.5.6/po/el.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/el.po 2015-04-29 13:55:14.000000000 +0200 @@ -28,7 +28,7 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/en_GB.po new/system-config-printer-1.5.7/po/en_GB.po --- old/system-config-printer-1.5.6/po/en_GB.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/en_GB.po 2015-04-29 13:55:14.000000000 +0200 @@ -21,7 +21,7 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/es.po new/system-config-printer-1.5.7/po/es.po --- old/system-config-printer-1.5.6/po/es.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/es.po 2015-04-29 13:55:14.000000000 +0200 @@ -26,7 +26,7 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/et.po new/system-config-printer-1.5.7/po/et.po --- old/system-config-printer-1.5.6/po/et.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/et.po 2015-04-29 13:55:14.000000000 +0200 @@ -21,7 +21,7 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/fa.po new/system-config-printer-1.5.7/po/fa.po --- old/system-config-printer-1.5.6/po/fa.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/fa.po 2015-04-29 13:55:14.000000000 +0200 @@ -21,7 +21,7 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/fi.po new/system-config-printer-1.5.7/po/fi.po --- old/system-config-printer-1.5.6/po/fi.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/fi.po 2015-04-29 13:55:14.000000000 +0200 @@ -22,7 +22,7 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/fr.po new/system-config-printer-1.5.7/po/fr.po --- old/system-config-printer-1.5.6/po/fr.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/fr.po 2015-04-29 13:55:14.000000000 +0200 @@ -36,7 +36,7 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n > 1);\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/gu.po new/system-config-printer-1.5.7/po/gu.po --- old/system-config-printer-1.5.6/po/gu.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/gu.po 2015-04-29 13:55:14.000000000 +0200 @@ -23,7 +23,7 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/he.po new/system-config-printer-1.5.7/po/he.po --- old/system-config-printer-1.5.6/po/he.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/he.po 2015-04-29 13:55:14.000000000 +0200 @@ -20,7 +20,7 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/hi.po new/system-config-printer-1.5.7/po/hi.po --- old/system-config-printer-1.5.6/po/hi.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/hi.po 2015-04-29 13:55:14.000000000 +0200 @@ -22,7 +22,7 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/hr.po new/system-config-printer-1.5.7/po/hr.po --- old/system-config-printer-1.5.6/po/hr.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/hr.po 2015-04-29 13:55:14.000000000 +0200 @@ -19,7 +19,7 @@ "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n%10>=2 && n" "%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/hu.po new/system-config-printer-1.5.7/po/hu.po --- old/system-config-printer-1.5.6/po/hu.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/hu.po 2015-04-29 13:55:15.000000000 +0200 @@ -20,7 +20,7 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/id.po new/system-config-printer-1.5.7/po/id.po --- old/system-config-printer-1.5.6/po/id.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/id.po 2015-04-29 13:55:15.000000000 +0200 @@ -9,13 +9,14 @@ # Erwien Samantha Y <erwiensamantha@sederhana.or.id>, 2004 # Nana Suryana <nana@suryana.or.id>, 2012 # Teguh DC <dheche@bradjamoesti.or.id>, 2005 +# Bagus Aji Santoso <baguzzzaji@gmail.com>, 2015. #zanata msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: https://bugzilla.redhat.com/bugzilla\n" "POT-Creation-Date: 2015-03-17 15:19+0000\n" -"PO-Revision-Date: 2014-10-23 06:58-0400\n" -"Last-Translator: Tim Waugh <twaugh@redhat.com>\n" +"PO-Revision-Date: 2015-03-19 08:34-0400\n" +"Last-Translator: Bagus Aji Santoso <baguzzzaji@gmail.com>\n" "Language-Team: Indonesian (http://www.transifex.com/projects/p/system-config-" "printer/language/id/)\n" "Language: id\n" @@ -23,7 +24,7 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 @@ -614,7 +615,7 @@ #: ../newprinter.py:704 msgid "Download Printer Driver" -msgstr "" +msgstr "Unduh Driver Printer" #: ../newprinter.py:713 ../newprinter.py:2081 ../newprinter.py:2086 msgid "fetching device list" @@ -623,11 +624,11 @@ #: ../newprinter.py:949 #, python-format msgid "Installing driver %s" -msgstr "" +msgstr "Memasang driver %s" #: ../newprinter.py:956 msgid "Installing ..." -msgstr "" +msgstr "Sedang memasang ..." #: ../newprinter.py:1318 ../newprinter.py:3102 ../newprinter.py:3330 #: ../ppdsloader.py:86 @@ -643,7 +644,7 @@ #. Separator? #: ../newprinter.py:2005 msgid "Enter URI" -msgstr "" +msgstr "Masukkan URI" #: ../newprinter.py:2010 msgid "Network Printer" @@ -687,11 +688,13 @@ "There were no print shares found. Please check that the Samba service is " "marked as trusted in your firewall configuration." msgstr "" +"Tidak ada printer yang dibagikan. Silahkan cek servis Samba telah " +"ditambahkan di daftar konfigurasi firewall anda." #: ../newprinter.py:2440 #, python-format msgid "Verification requires the %s module" -msgstr "" +msgstr "Verifikasi membutuhkan modul %s" #: ../newprinter.py:2494 msgid "Allow all incoming SMB/CIFS browse packets" @@ -796,7 +799,7 @@ msgid "" "HPLIP software driving a printer, or the printer function of a multi-" "function device." -msgstr "" +msgstr "Terjadi kesalahan dengan berkas PPD untuk printer '%s'." #: ../newprinter.py:2960 msgid "" diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/is.po new/system-config-printer-1.5.7/po/is.po --- old/system-config-printer-1.5.6/po/is.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/is.po 2015-04-29 13:55:15.000000000 +0200 @@ -20,7 +20,7 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/it.po new/system-config-printer-1.5.7/po/it.po --- old/system-config-printer-1.5.6/po/it.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/it.po 2015-04-29 13:55:15.000000000 +0200 @@ -31,7 +31,7 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/ja.po new/system-config-printer-1.5.7/po/ja.po --- old/system-config-printer-1.5.6/po/ja.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/ja.po 2015-04-29 13:55:15.000000000 +0200 @@ -26,7 +26,7 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/kn.po new/system-config-printer-1.5.7/po/kn.po --- old/system-config-printer-1.5.6/po/kn.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/kn.po 2015-04-29 13:55:15.000000000 +0200 @@ -20,7 +20,7 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/ko.po new/system-config-printer-1.5.7/po/ko.po --- old/system-config-printer-1.5.6/po/ko.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/ko.po 2015-04-29 13:55:15.000000000 +0200 @@ -20,7 +20,7 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/lv.po new/system-config-printer-1.5.7/po/lv.po --- old/system-config-printer-1.5.6/po/lv.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/lv.po 2015-04-29 13:55:15.000000000 +0200 @@ -25,7 +25,7 @@ "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n != 0 ? 1 : " "2);\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/mai.po new/system-config-printer-1.5.7/po/mai.po --- old/system-config-printer-1.5.6/po/mai.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/mai.po 2015-04-29 13:55:15.000000000 +0200 @@ -19,7 +19,7 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/mk.po new/system-config-printer-1.5.7/po/mk.po --- old/system-config-printer-1.5.6/po/mk.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/mk.po 2015-04-29 13:55:15.000000000 +0200 @@ -21,7 +21,7 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n % 10 == 1 && n % 100 != 11) ? 0 : 1;\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/ml.po new/system-config-printer-1.5.7/po/ml.po --- old/system-config-printer-1.5.6/po/ml.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/ml.po 2015-04-29 13:55:15.000000000 +0200 @@ -18,7 +18,7 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/mr.po new/system-config-printer-1.5.7/po/mr.po --- old/system-config-printer-1.5.6/po/mr.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/mr.po 2015-04-29 13:55:15.000000000 +0200 @@ -22,7 +22,7 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/ms.po new/system-config-printer-1.5.7/po/ms.po --- old/system-config-printer-1.5.6/po/ms.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/ms.po 2015-04-29 13:55:15.000000000 +0200 @@ -20,7 +20,7 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/nb.po new/system-config-printer-1.5.7/po/nb.po --- old/system-config-printer-1.5.6/po/nb.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/nb.po 2015-04-29 13:55:15.000000000 +0200 @@ -22,7 +22,7 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/nds.po new/system-config-printer-1.5.7/po/nds.po --- old/system-config-printer-1.5.6/po/nds.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/nds.po 2015-04-29 13:55:16.000000000 +0200 @@ -19,7 +19,7 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/nl.po new/system-config-printer-1.5.7/po/nl.po --- old/system-config-printer-1.5.6/po/nl.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/nl.po 2015-04-29 13:55:16.000000000 +0200 @@ -25,7 +25,7 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/nn.po new/system-config-printer-1.5.7/po/nn.po --- old/system-config-printer-1.5.6/po/nn.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/nn.po 2015-04-29 13:55:16.000000000 +0200 @@ -22,7 +22,7 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/or.po new/system-config-printer-1.5.7/po/or.po --- old/system-config-printer-1.5.6/po/or.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/or.po 2015-04-29 13:55:16.000000000 +0200 @@ -22,7 +22,7 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/pa.po new/system-config-printer-1.5.7/po/pa.po --- old/system-config-printer-1.5.6/po/pa.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/pa.po 2015-04-29 13:55:16.000000000 +0200 @@ -25,7 +25,7 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/pl.po new/system-config-printer-1.5.7/po/pl.po --- old/system-config-printer-1.5.6/po/pl.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/pl.po 2015-04-29 13:55:16.000000000 +0200 @@ -23,7 +23,7 @@ "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 " "|| n%100>=20) ? 1 : 2);\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/pt.po new/system-config-printer-1.5.7/po/pt.po --- old/system-config-printer-1.5.6/po/pt.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/pt.po 2015-04-29 13:55:16.000000000 +0200 @@ -19,7 +19,7 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/pt_BR.po new/system-config-printer-1.5.7/po/pt_BR.po --- old/system-config-printer-1.5.6/po/pt_BR.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/pt_BR.po 2015-04-29 13:55:16.000000000 +0200 @@ -30,7 +30,7 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n > 1);\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/ro.po new/system-config-printer-1.5.7/po/ro.po --- old/system-config-printer-1.5.6/po/ro.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/ro.po 2015-04-29 13:55:16.000000000 +0200 @@ -20,7 +20,7 @@ "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=3; plural=(n==1?0:(((n%100>19)||((n%100==0)&&(n!=0)))?" "2:1));\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/ru.po new/system-config-printer-1.5.7/po/ru.po --- old/system-config-printer-1.5.6/po/ru.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/ru.po 2015-04-29 13:55:16.000000000 +0200 @@ -34,7 +34,7 @@ "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n" "%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/si.po new/system-config-printer-1.5.7/po/si.po --- old/system-config-printer-1.5.6/po/si.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/si.po 2015-04-29 13:55:16.000000000 +0200 @@ -19,7 +19,7 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/sk.po new/system-config-printer-1.5.7/po/sk.po --- old/system-config-printer-1.5.6/po/sk.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/sk.po 2015-04-29 13:55:16.000000000 +0200 @@ -23,7 +23,7 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/sl.po new/system-config-printer-1.5.7/po/sl.po --- old/system-config-printer-1.5.6/po/sl.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/sl.po 2015-04-29 13:55:16.000000000 +0200 @@ -23,7 +23,7 @@ "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=4; plural=(n%100==1 ? 0 : n%100==2 ? 1 : n%100==3 || n" "%100==4 ? 2 : 3);\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/sr.po new/system-config-printer-1.5.7/po/sr.po --- old/system-config-printer-1.5.6/po/sr.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/sr.po 2015-04-29 13:55:17.000000000 +0200 @@ -21,7 +21,7 @@ "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n" "%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/sr@latin.po new/system-config-printer-1.5.7/po/sr@latin.po --- old/system-config-printer-1.5.6/po/sr@latin.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/sr@latin.po 2015-04-29 13:55:16.000000000 +0200 @@ -20,7 +20,7 @@ "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n" "%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/sv.po new/system-config-printer-1.5.7/po/sv.po --- old/system-config-printer-1.5.6/po/sv.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/sv.po 2015-04-29 13:55:17.000000000 +0200 @@ -21,7 +21,7 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/ta.po new/system-config-printer-1.5.7/po/ta.po --- old/system-config-printer-1.5.6/po/ta.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/ta.po 2015-04-29 13:55:17.000000000 +0200 @@ -24,7 +24,7 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/te.po new/system-config-printer-1.5.7/po/te.po --- old/system-config-printer-1.5.6/po/te.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/te.po 2015-04-29 13:55:17.000000000 +0200 @@ -19,7 +19,7 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/th.po new/system-config-printer-1.5.7/po/th.po --- old/system-config-printer-1.5.6/po/th.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/th.po 2015-04-29 13:55:17.000000000 +0200 @@ -20,7 +20,7 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/tr.po new/system-config-printer-1.5.7/po/tr.po --- old/system-config-printer-1.5.6/po/tr.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/tr.po 2015-04-29 13:55:17.000000000 +0200 @@ -20,7 +20,7 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n > 1);\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/uk.po new/system-config-printer-1.5.7/po/uk.po --- old/system-config-printer-1.5.6/po/uk.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/uk.po 2015-04-29 13:55:17.000000000 +0200 @@ -23,7 +23,7 @@ "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n" "%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/vi.po new/system-config-printer-1.5.7/po/vi.po --- old/system-config-printer-1.5.6/po/vi.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/vi.po 2015-04-29 13:55:17.000000000 +0200 @@ -20,7 +20,7 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/zh_CN.po new/system-config-printer-1.5.7/po/zh_CN.po --- old/system-config-printer-1.5.6/po/zh_CN.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/zh_CN.po 2015-04-29 13:55:17.000000000 +0200 @@ -30,7 +30,7 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/po/zh_TW.po new/system-config-printer-1.5.7/po/zh_TW.po --- old/system-config-printer-1.5.6/po/zh_TW.po 2015-03-17 16:41:23.000000000 +0100 +++ new/system-config-printer-1.5.7/po/zh_TW.po 2015-04-29 13:55:17.000000000 +0200 @@ -23,7 +23,7 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" -"X-Generator: Zanata 3.5.1\n" +"X-Generator: Zanata 3.6.2\n" #: ../asyncipp.py:473 ../authconn.py:447 ../authconn.py:449 #: ../errordialogs.py:63 ../pysmb.py:90 ../pysmb.py:92 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/system-config-printer.appdata.xml.in new/system-config-printer-1.5.7/system-config-printer.appdata.xml.in --- old/system-config-printer-1.5.6/system-config-printer.appdata.xml.in 2015-03-17 16:19:09.000000000 +0100 +++ new/system-config-printer-1.5.7/system-config-printer.appdata.xml.in 2015-04-23 17:05:58.000000000 +0200 @@ -3,8 +3,8 @@ <id type="desktop">system-config-printer.desktop</id> <metadata_license>CC0</metadata_license> <project_license>GPL-2.0+</project_license> - <name>system-config-printer</name> - <summary>Configure printer queues</summary> + <_name>Print Settings</_name> + <_summary>Configure printer queues</_summary> <description> <_p>With system-config-printer you can add, edit and delete diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/test_PhysicalDevice.py new/system-config-printer-1.5.7/test_PhysicalDevice.py --- old/system-config-printer-1.5.6/test_PhysicalDevice.py 2015-03-17 16:19:09.000000000 +0100 +++ new/system-config-printer-1.5.7/test_PhysicalDevice.py 2015-04-23 17:22:28.000000000 +0200 @@ -34,3 +34,18 @@ 'device-make-and-model': "Abc Def", 'device-id': "MFG:Abc;MDL:Def;"}) phys.add_device (device) + devices = phys.get_devices () + assert devices[0].uri.startswith ("hp:") + + device = cupshelpers.Device("usb://Abc/Def", + **{'device-class': "direct", + 'device-make-and-model': "Abc Def", + 'device-id': "MFG:Abc;MDL:Def;"}) + phys = PhysicalDevice (device) + device = cupshelpers.Device("hp://Abc/Def", + **{'device-class': "direct", + 'device-make-and-model': "Abc Def", + 'device-id': "MFG:Abc;MDL:Def;"}) + phys.add_device (device) + devices = phys.get_devices () + assert devices[0].uri.startswith ("hp") diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/udev/udev-configure-printer.c new/system-config-printer-1.5.7/udev/udev-configure-printer.c --- old/system-config-printer-1.5.6/udev/udev-configure-printer.c 2015-03-17 16:19:09.000000000 +0100 +++ new/system-config-printer-1.5.7/udev/udev-configure-printer.c 2015-04-23 17:05:58.000000000 +0200 @@ -1016,8 +1016,8 @@ uris->n_uris = uris_noserial.n_uris = all_uris.n_uris = 0; uris->uri = uris_noserial.uri = all_uris.uri = NULL; - /* Leave the bus to settle. */ - sleep (1); + /* Leave the bus to settle (see e.g. bug #1206808). */ + sleep (5); cups = httpConnectEncrypt (cupsServer (), ippPort(), cupsEncryption ()); if (cups == NULL) diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/ui/ConnectDialog.ui new/system-config-printer-1.5.7/ui/ConnectDialog.ui --- old/system-config-printer-1.5.6/ui/ConnectDialog.ui 2015-03-17 16:19:09.000000000 +0100 +++ new/system-config-printer-1.5.7/ui/ConnectDialog.ui 2015-04-23 17:05:58.000000000 +0200 @@ -24,7 +24,8 @@ <property name="layout_style">end</property> <child> <object class="GtkButton" id="button16"> - <property name="label" translatable="yes">Cancel</property> + <property name="label" translatable="yes">_Cancel</property> + <property name="use_underline">True</property> <property name="visible">True</property> <property name="can_focus">True</property> <property name="can_default">True</property> @@ -39,6 +40,7 @@ <child> <object class="GtkButton" id="btnConnect"> <property name="label" translatable="yes">Connect</property> + <property name="use_underline">True</property> <property name="visible">True</property> <property name="can_focus">True</property> <property name="can_default">True</property> diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/ui/ConnectingDialog.ui new/system-config-printer-1.5.7/ui/ConnectingDialog.ui --- old/system-config-printer-1.5.6/ui/ConnectingDialog.ui 2015-03-17 16:19:09.000000000 +0100 +++ new/system-config-printer-1.5.7/ui/ConnectingDialog.ui 2015-04-23 17:05:58.000000000 +0200 @@ -23,7 +23,8 @@ <property name="layout_style">end</property> <child> <object class="GtkButton" id="button17"> - <property name="label" translatable="yes">Cancel</property> + <property name="label" translatable="yes">_Cancel</property> + <property name="use_underline">True</property> <property name="visible">True</property> <property name="can_focus">True</property> <property name="can_default">True</property> diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/ui/InstallDialog.ui new/system-config-printer-1.5.7/ui/InstallDialog.ui --- old/system-config-printer-1.5.6/ui/InstallDialog.ui 2015-03-17 16:19:09.000000000 +0100 +++ new/system-config-printer-1.5.7/ui/InstallDialog.ui 2015-04-23 17:05:58.000000000 +0200 @@ -22,6 +22,7 @@ <child> <object class="GtkButton" id="button18"> <property name="label" translatable="yes">Close</property> + <property name="use_underline">True</property> <property name="visible">True</property> <property name="can_focus">True</property> <property name="can_default">True</property> diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/ui/NewPrinterName.ui new/system-config-printer-1.5.7/ui/NewPrinterName.ui --- old/system-config-printer-1.5.6/ui/NewPrinterName.ui 2015-03-17 16:19:09.000000000 +0100 +++ new/system-config-printer-1.5.7/ui/NewPrinterName.ui 2015-04-23 17:05:58.000000000 +0200 @@ -21,7 +21,8 @@ <property name="layout_style">end</property> <child> <object class="GtkButton" id="btnDuplicateCancel"> - <property name="label" translatable="yes">Cancel</property> + <property name="label" translatable="yes">_Cancel</property> + <property name="use_underline">True</property> <property name="visible">True</property> <property name="can_focus">True</property> <property name="receives_default">False</property> @@ -34,7 +35,8 @@ </child> <child> <object class="GtkButton" id="btnDuplicateOk"> - <property name="label" translatable="yes">OK</property> + <property name="label" translatable="yes">_OK</property> + <property name="use_underline">True</property> <property name="visible">True</property> <property name="can_focus">True</property> <property name="can_default">True</property> diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/ui/NewPrinterWindow.ui new/system-config-printer-1.5.7/ui/NewPrinterWindow.ui --- old/system-config-printer-1.5.6/ui/NewPrinterWindow.ui 2015-03-17 16:19:09.000000000 +0100 +++ new/system-config-printer-1.5.7/ui/NewPrinterWindow.ui 2015-04-23 17:05:58.000000000 +0200 @@ -1221,6 +1221,7 @@ <child> <object class="GtkButton" id="btnNetworkFind"> <property name="label" translatable="yes">Find</property> + <property name="use_underline">True</property> <property name="visible">True</property> <property name="sensitive">False</property> <property name="can_focus">True</property> @@ -3101,7 +3102,8 @@ <property name="layout_style">end</property> <child> <object class="GtkButton" id="btnNPBack"> - <property name="label" translatable="yes">Back</property> + <property name="label" translatable="yes">_Back</property> + <property name="use_underline">True</property> <property name="visible">True</property> <property name="can_focus">True</property> <property name="can_default">True</property> @@ -3116,7 +3118,8 @@ </child> <child> <object class="GtkButton" id="btnNPCancel"> - <property name="label" translatable="yes">Cancel</property> + <property name="label" translatable="yes">_Cancel</property> + <property name="use_underline" >True</property> <property name="visible">True</property> <property name="can_focus">True</property> <property name="can_default">True</property> @@ -3131,7 +3134,8 @@ </child> <child> <object class="GtkButton" id="btnNPApply"> - <property name="label" translatable="yes">Apply</property> + <property name="label" translatable="yes">_Apply</property> + <property name="use_underline">True</property> <property name="visible">True</property> <property name="can_focus">True</property> <property name="can_default">True</property> @@ -3146,7 +3150,8 @@ </child> <child> <object class="GtkButton" id="btnNPForward"> - <property name="label" translatable="yes">Forward</property> + <property name="label" translatable="yes">_Forward</property> + <property name="use_underline">True</property> <property name="visible">True</property> <property name="can_focus">True</property> <property name="can_default">True</property> diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/ui/PrinterPropertiesDialog.ui new/system-config-printer-1.5.7/ui/PrinterPropertiesDialog.ui --- old/system-config-printer-1.5.6/ui/PrinterPropertiesDialog.ui 2015-03-17 16:19:09.000000000 +0100 +++ new/system-config-printer-1.5.7/ui/PrinterPropertiesDialog.ui 2015-04-23 17:05:58.000000000 +0200 @@ -149,7 +149,8 @@ </child> <child> <object class="GtkButton" id="btnPrinterPropertiesApply"> - <property name="label" translatable="yes">Apply</property> + <property name="label" translatable="yes">_Apply</property> + <property name="use_underline">True</property> <property name="visible">True</property> <property name="can_focus">True</property> <property name="can_default">True</property> @@ -163,7 +164,8 @@ </child> <child> <object class="GtkButton" id="btnPrinterPropertiesCancel"> - <property name="label" translatable="yes">Cancel</property> + <property name="label" translatable="yes">_Cancel</property> + <property name="use_underline">True</property> <property name="visible">True</property> <property name="can_focus">True</property> <property name="can_default">True</property> @@ -177,7 +179,8 @@ </child> <child> <object class="GtkButton" id="btnPrinterPropertiesOK"> - <property name="label" translatable="yes">OK</property> + <property name="label" translatable="yes">_OK</property> + <property name="use_underline">True</property> <property name="visible">True</property> <property name="can_focus">True</property> <property name="can_default">True</property> @@ -191,7 +194,8 @@ </child> <child> <object class="GtkButton" id="btnPrinterPropertiesClose"> - <property name="label" translatable="yes">Close</property> + <property name="label" translatable="yes">_Close</property> + <property name="use_underline">True</property> <property name="visible">True</property> <property name="can_focus">True</property> <property name="can_default">True</property> @@ -1013,7 +1017,8 @@ <property name="orientation">vertical</property> <child> <object class="GtkButton" id="btnPDelUser"> - <property name="label" translatable="yes">Delete</property> + <property name="label" translatable="yes">_Delete</property> + <property name="use_underline">True</property> <property name="visible">True</property> <property name="can_focus">True</property> <property name="receives_default">False</property> @@ -1037,7 +1042,8 @@ </child> <child> <object class="GtkButton" id="btnPAddUser"> - <property name="label" translatable="yes">Add</property> + <property name="label" translatable="yes">_Add</property> + <property name="use_underline">True</property> <property name="visible">True</property> <property name="can_focus">True</property> <property name="can_default">True</property> @@ -3328,6 +3334,7 @@ <child> <object class="GtkButton" id="btnNewJobOption"> <property name="label" translatable="yes">Add</property> + <property name="use_underline">True</property> <property name="visible">True</property> <property name="can_focus">True</property> <property name="receives_default">False</property> @@ -3449,6 +3456,7 @@ <child> <object class="GtkButton" id="btnRefreshMarkerLevels"> <property name="label" translatable="yes">Refresh</property> + <property name="use_underline">True</property> <property name="visible">True</property> <property name="can_focus">True</property> <property name="can_default">True</property> diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/ui/PrintersWindow.ui new/system-config-printer-1.5.7/ui/PrintersWindow.ui --- old/system-config-printer-1.5.6/ui/PrintersWindow.ui 2015-03-17 16:19:09.000000000 +0100 +++ new/system-config-printer-1.5.7/ui/PrintersWindow.ui 2015-04-23 17:05:58.000000000 +0200 @@ -92,6 +92,7 @@ <child> <object class="GtkImageMenuItem" id="about"> <property name="label" translatable="yes">About</property> + <property name="use_underline">True</property> <property name="use_action_appearance">False</property> <property name="visible">True</property> <property name="can_focus">False</property> @@ -198,6 +199,7 @@ <child> <object class="GtkButton" id="btnAddFirstPrinter"> <property name="label" translatable="yes">Add</property> + <property name="use_underline">True</property> <property name="use_action_appearance">False</property> <property name="visible">True</property> <property name="can_focus">True</property> @@ -277,6 +279,7 @@ <child> <object class="GtkButton" id="btnConnectNoService"> <property name="label" translatable="yes">Connect</property> + <property name="use_underline">True</property> <property name="use_action_appearance">False</property> <property name="visible">True</property> <property name="can_focus">True</property> diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/ui/SMBBrowseDialog.ui new/system-config-printer-1.5.7/ui/SMBBrowseDialog.ui --- old/system-config-printer-1.5.6/ui/SMBBrowseDialog.ui 2015-03-17 16:19:09.000000000 +0100 +++ new/system-config-printer-1.5.7/ui/SMBBrowseDialog.ui 2015-04-23 17:05:58.000000000 +0200 @@ -58,7 +58,8 @@ <property name="homogeneous">True</property> <child> <object class="GtkButton" id="btnSMBBrowseRefresh"> - <property name="label" translatable="yes">Refresh</property> + <property name="label" translatable="yes">_Refresh</property> + <property name="use_underline">True</property> <property name="visible">True</property> <property name="can_focus">True</property> <property name="can_default">True</property> @@ -73,7 +74,8 @@ </child> <child> <object class="GtkButton" id="btnSMBBrowseCancel"> - <property name="label" translatable="yes">Cancel</property> + <property name="label" translatable="yes">_Cancel</property> + <property name="use_underline">True</property> <property name="visible">True</property> <property name="can_focus">True</property> <property name="can_default">True</property> @@ -88,7 +90,8 @@ </child> <child> <object class="GtkButton" id="btnSMBBrowseOk"> - <property name="label" translatable="yes">OK</property> + <property name="label" translatable="yes">_OK</property> + <property name="use_underline">True</property> <property name="visible">True</property> <property name="can_focus">True</property> <property name="can_default">True</property> diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/ui/ServerSettingsDialog.ui new/system-config-printer-1.5.7/ui/ServerSettingsDialog.ui --- old/system-config-printer-1.5.6/ui/ServerSettingsDialog.ui 2015-03-17 16:19:09.000000000 +0100 +++ new/system-config-printer-1.5.7/ui/ServerSettingsDialog.ui 2015-04-23 17:05:58.000000000 +0200 @@ -22,7 +22,8 @@ <property name="layout_style">end</property> <child> <object class="GtkButton" id="cancelbutton2"> - <property name="label" translatable="yes">Cancel</property> + <property name="label" translatable="yes">_Cancel</property> + <property name="use_underline">True</property> <property name="visible">True</property> <property name="can_focus">True</property> <property name="can_default">True</property> @@ -36,7 +37,8 @@ </child> <child> <object class="GtkButton" id="okbutton4"> - <property name="label" translatable="yes">OK</property> + <property name="label" translatable="yes">_OK</property> + <property name="use_underline">True</property> <property name="visible">True</property> <property name="can_focus">True</property> <property name="can_default">True</property> @@ -332,6 +334,7 @@ <child> <object class="GtkButton" id="btAdvServerAdd"> <property name="label" translatable="yes">Add</property> + <property name="use_underline">True</property> <property name="visible">True</property> <property name="can_focus">True</property> <property name="receives_default">True</property> @@ -346,6 +349,7 @@ <child> <object class="GtkButton" id="btAdvServerRemove"> <property name="label" translatable="yes">Remove</property> + <property name="use_underline">True</property> <property name="visible">True</property> <property name="sensitive">False</property> <property name="can_focus">True</property> diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/system-config-printer-1.5.6/ui/statusicon_popupmenu.ui new/system-config-printer-1.5.7/ui/statusicon_popupmenu.ui --- old/system-config-printer-1.5.6/ui/statusicon_popupmenu.ui 2015-03-17 16:19:09.000000000 +0100 +++ new/system-config-printer-1.5.7/ui/statusicon_popupmenu.ui 2015-04-23 17:05:58.000000000 +0200 @@ -30,7 +30,8 @@ </child> <child> <object class="GtkImageMenuItem" id="quit1"> - <property name="label" translatable="yes">Quit</property> + <property name="label" translatable="yes">_Quit</property> + <property name="use_underline">True</property> <property name="visible">True</property> <property name="can_focus">False</property> <property name="use_underline">True</property> ++++++ system-config-printer.keyring ++++++ --- /var/tmp/diff_new_pack.Imvjb7/_old 2015-05-16 07:13:54.000000000 +0200 +++ /var/tmp/diff_new_pack.Imvjb7/_new 2015-05-16 07:13:54.000000000 +0200 @@ -45,3 +45,43 @@ DmyT9AyUiRcD =skGP -----END PGP PUBLIC KEY BLOCK----- +-----BEGIN PGP PUBLIC KEY BLOCK----- +Version: GnuPG v2 + +mQENBFUxGaABCACej3m5DtNx0dTRelAEi8RQvkDuKjXMmRy2cqo/QAal14Ps5WmR +Cz0XmCJoH8pEz0Qe9Sr60kjDAhafQWGq6X5XkG3srIK7ajHrmelvOG04SMobU0s8 +AypAH89SgXXIEysqf8SNm0SoYpdYDbqWaUTrEzDekrtPq4YlfOlUz+phOCAboJXe +gTe+wkEf1ycui5syr8daI/v2u/YDpgsBWB2zAE6PTvyZBqmtyYNDHshdKVMcZ590 +JDKQ6GWbE+5J5rKECNJ9p8B0feJrA8Meb8yCQPTn3dCw/kBnodDQghIDfoBaQpqY +Kbmy680zEy70clUiMAg5w5KqipOfKvM7/lVNABEBAAG0HFRpbSBXYXVnaCA8dGlt +QGN5YmVyZWxrLm5ldD6JATcEEwEIACEFAlUxGdMCGwMFCwkIBwIGFQgJCgsCBBYC +AwECHgECF4AACgkQt8INB5SR6mOTygf7BeYSs0twAIzPDbBIE/yMPF11+mbDHOX+ +ODLEEzzwQrV6QMe1S+5ibtTJPn0fPrNihEkr0tDflHzGwP7LRElPKow9HgTnBZoR +GNrBAtJKlN80y5THWme2L9Q4NT+8jG+rxyyFJTWZxcjQaX+7lM1yAgrwelEwdyrw +lfLxDB7y0YpDPL3SLuMC2AawBr/bZOaorVZmi2XyLC4hsA5/DRrq0Xeyr6Nvms+8 +j/7lRjvc04RzPU6QZyZ1B7nFHb2Zr0mQ37QS0wNiOiTp4NxgmpZG/DLqGHnSBsJc +e5tOeAL9g5NoB57/IC6RjFNBGMp0TQAQ+k6JDlZDAvEMpFd7PBLaLYhGBBARAgAG +BQJVMSmPAAoJEO3nxuaBAwm9GqUAn2QzjPrp8COLOOIqa+Sc2EJkHjgdAJ9bR3Po +oe9aMsry9Df1bDFgxOG/qrQdVGltIFdhdWdoIDx0d2F1Z2hAcmVkaGF0LmNvbT6J +ATcEEwEIACEFAlUxGaACGwMFCwkIBwIGFQgJCgsCBBYCAwECHgECF4AACgkQt8IN +B5SR6mMNDAgAl9Ejov8B1Y6OGYxAzzFZr8aZ/aGhSpDMAq6/IYWlQnNZ+2a0X099 +j2XCE32vN73Ypm+Tw59XIIV905eYYAd95nuKrUkEfEAU570+So6T7q1pN5s8u7vy +rEoKR4I6jDSu4+nAQ/FZ/iu7PB5fowMfpMaoxJlaWZbE5nbfdm+Bw/Gfr19VL1ca +GRuOTbFLrd0oKf45QDO6GLAuBDoWB5QwJBgL6Byq6Asx6z03cesM4kB1VEJzSJ6V +FbExPT+FqGvJth8n2JQsi0rbWToVNBQtErk9A87kvlmBFlnkRkeSZX78usqQa0Z3 +RwT2u7xaBQK650UVt75lWZDoUIpbTg6wf4hGBBARAgAGBQJVMSmVAAoJEO3nxuaB +Awm9tv0An0gTMYAPblacwAec49cbKCt3CBHCAJ9JdQJisyWA+FHdevvwibSkhhML +XrkBDQRVMRmgAQgA6uU43S5QrgUF9i0s1Bw7FfYsMA/2coe/TvsWf/bEpDMWd2aa +9lsbnR6mymjHCS7ZGlvaZ97eO2e4bD5DiAb2fPrFX0MMsqKTFM5z+IK/tCSDCreg +v8Js95eN6cGm8BfXyrq4ooKxAy85e8SzSx08jwLdAGMHoqM5+JoaD2KfYSFvLx7d +gXjEqBWGD57rBUrwQ7i64bHBlphN1ttOyJj58y7/fhwAM9zl53Yb/6oDdMpb3DIl +lrl6FUslCMvWdO7KI7vwkVTUnedNZKa0d3C2DKx14JjG/W+1gltG+pf97XdPlxGe +WXoGA+otbsBh/zdID1v+7LCt9oN+vaoGgsLpiwARAQABiQEfBBgBCAAJBQJVMRmg +AhsMAAoJELfCDQeUkepjvvgIAJOP/RwbMykz+ndAzU5SnvL7GAfY52cfq2upM05N +pvaDBfWq9gaoVQ01byfkJFLykCeMytmh4uWNHgYtkWfF69mFWg+TlIPDjucR4MB4 +C9/wV0QehcOL8YyF75Y53CF1ZIy/FN2BiWeDW7WGAWEx+alUiyM0L+wy1zxuMbdX +HbE7lvys2HTvgAnB34H8aqod4A5AYBDFjnWxgsTX5PUStjQZJ7yVLgD5VCNtaAcf +3ZbTonnLJ519orEx/qPijjQU+YPrzmSWC4/V7yZOumk48THjJ+njtvB69wtAltc7 +5TfZGRNw8a0IR8IpmdbegCcQQFeBO0Dhk08r+zbGSimCYaI= +=ISXp +-----END PGP PUBLIC KEY BLOCK-----