![](https://seccdn.libravatar.org/avatar/e2145bc5cf53dda95c308a3c75e8fef3.jpg?s=120&d=mm&r=g)
Hello community, here is the log from the commit of package aytests-tests for openSUSE:Factory checked in at 2018-09-14 00:01:57 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/aytests-tests (Old) and /work/SRC/openSUSE:Factory/.aytests-tests.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "aytests-tests" Fri Sep 14 00:01:57 2018 rev:5 rq:635501 version:1.2.40 Changes: -------- --- /work/SRC/openSUSE:Factory/aytests-tests/aytests-tests.changes 2018-03-01 12:07:45.338212721 +0100 +++ /work/SRC/openSUSE:Factory/.aytests-tests.new/aytests-tests.changes 2018-09-14 00:01:59.933925870 +0200 @@ -1,0 +2,77 @@ +Thu Sep 13 08:26:42 UTC 2018 - riafarov@suse.com + +- Check log messages in all log archives +- 1.2.40 + +------------------------------------------------------------------- +Thu Aug 30 07:33:44 UTC 2018 - riafarov@suse.com + +- Look for unsupported sections message in all log files +- 1.2.39 + +------------------------------------------------------------------- +Tue May 15 16:51:31 CEST 2018 - schubi@suse.de + +- Timing issue in systemctl: Dalay of service start. +- Removed sles15_lvm_thin_pool from jenkins list because it cannot + run. +- 1.2.38 + +------------------------------------------------------------------- +Mon Apr 16 15:13:14 CEST 2018 - schubi@suse.de + +- Removed libstorage-ng lock file /run/libstorage-ng/lock in order + to run "yast clone_system" while installation. +- 1.2.37 + +------------------------------------------------------------------- +Thu Apr 12 15:17:58 UTC 2018 - igonzalezsosa@suse.com + +- Add a new scenario using a LVM setup with a thin pool + (bsc#1086596). +- 1.2.36 + +------------------------------------------------------------------- +Tue Apr 3 06:54:16 UTC 2018 - riafarov@suse.com + +- Remove FW_LOG_ACCEPT_CRIT from lvm profile +- 1.2.35 + +------------------------------------------------------------------- +Mon Mar 26 15:33:12 UTC 2018 - cwh@suse.com + +- Adapted btrfs_snapshots.sh to the new format used in fstab. +- 1.2.34 + +------------------------------------------------------------------- +Mon Mar 12 14:57:40 CET 2018 - schubi@suse.de + +- Removed profile_sections.sh from sles_network.rb test due missing + firewall settings. Test sles.rb is already calling this check. +- 1.2.33 + +------------------------------------------------------------------- +Wed Mar 7 12:04:13 CET 2018 - schubi@suse.de + +- Renaming base product name (SLES15 -> SLES) (bsc#1084259) +- 1.2.32 + +------------------------------------------------------------------- +Wed Mar 7 09:32:05 CET 2018 - schubi@suse.de + +- Adapting firewall to SLES15. +- 1.2.31 + +------------------------------------------------------------------- +Tue Mar 6 14:02:10 CET 2018 - schubi@suse.de + +- Adapted testcases. (tftp-server, removed ca-management,...) +- 1.2.30 + +------------------------------------------------------------------- +Wed Feb 28 16:56:21 UTC 2018 - riafarov@suse.com + +- Adjust firewall.sh for firewalld +- 1.2.29 + +------------------------------------------------------------------- Old: ---- aytests-tests-1.2.28.tar.bz2 New: ---- aytests-tests-1.2.40.tar.bz2 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ aytests-tests.spec ++++++ --- /var/tmp/diff_new_pack.qeT44N/_old 2018-09-14 00:02:00.765925234 +0200 +++ /var/tmp/diff_new_pack.qeT44N/_new 2018-09-14 00:02:00.793925213 +0200 @@ -17,7 +17,7 @@ Name: aytests-tests -Version: 1.2.28 +Version: 1.2.40 Release: 0 BuildRoot: %{_tmppath}/%{name}-%{version}-build @@ -26,7 +26,7 @@ BuildArch: noarch Summary: Integration tests for AutoYaST2 -License: GPL-3.0 +License: GPL-3.0-only Group: System/YaST Url: https://github.com/yast/aytests-tests ++++++ aytests-tests-1.2.28.tar.bz2 -> aytests-tests-1.2.40.tar.bz2 ++++++ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/aytests-tests-1.2.28/aytests/btrfs_snapshots.sh new/aytests-tests-1.2.40/aytests/btrfs_snapshots.sh --- old/aytests-tests-1.2.28/aytests/btrfs_snapshots.sh 2018-02-28 13:43:43.000000000 +0100 +++ new/aytests-tests-1.2.40/aytests/btrfs_snapshots.sh 2018-09-13 11:01:31.000000000 +0200 @@ -6,7 +6,7 @@ btrfs subvolume list / | grep '@/.snapshots' && SUBVOLUME_EXISTS=1 -grep '/\.snapshots .*subvol=@/\.snapshots' /etc/fstab && SUBVOLUME_IN_FSTAB=1 +grep '/\.snapshots .*subvol=/@/\.snapshots' /etc/fstab && SUBVOLUME_IN_FSTAB=1 if [ "${SUBVOLUME_EXISTS}" == "1" ] && [ "${SUBVOLUME_IN_FSTAB}" == "1" ]; then echo "AUTOYAST OK" diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/aytests-tests-1.2.28/aytests/ca_mgm.sh new/aytests-tests-1.2.40/aytests/ca_mgm.sh --- old/aytests-tests-1.2.28/aytests/ca_mgm.sh 2018-02-28 13:43:43.000000000 +0100 +++ new/aytests-tests-1.2.40/aytests/ca_mgm.sh 1970-01-01 01:00:00.000000000 +0100 @@ -1,4 +0,0 @@ -#!/bin/bash -# Checking if ca management has reported an error and has gone on. (bnc#962328) -set -e -x -grep "Showing error" /var/log/YaST2/y2log | grep "postmaster@" && echo "AUTOYAST OK" diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/aytests-tests-1.2.28/aytests/chrony.sh new/aytests-tests-1.2.40/aytests/chrony.sh --- old/aytests-tests-1.2.28/aytests/chrony.sh 2018-02-28 13:43:43.000000000 +0100 +++ new/aytests-tests-1.2.40/aytests/chrony.sh 2018-09-13 11:01:31.000000000 +0200 @@ -1,9 +1,7 @@ #!/bin/bash set -e -x - # Check whether the chrony service configured and running (FATE#323432) - -systemctl is-active chronyd +systemctl -a|grep chronyd|grep "activating\|running" grep "pool cz.pool.ntp.org" /etc/chrony.conf echo "AUTOYAST OK" diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/aytests-tests-1.2.28/aytests/firewall.sh new/aytests-tests-1.2.40/aytests/firewall.sh --- old/aytests-tests-1.2.28/aytests/firewall.sh 2018-02-28 13:43:43.000000000 +0100 +++ new/aytests-tests-1.2.40/aytests/firewall.sh 2018-09-13 11:01:31.000000000 +0200 @@ -2,5 +2,7 @@ set -e -x -grep "FW_CONFIGURATIONS_EXT=\"apache2 apache2-ssl\"" /etc/sysconfig/SuSEfirewall2 +SERVICES=`firewall-offline-cmd --zone=external --list-services` +test "$SERVICES" == 'http https' || echo 'Services are not configured properly, expected http https' + echo "AUTOYAST OK" diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/aytests-tests-1.2.28/aytests/http.xml new/aytests-tests-1.2.40/aytests/http.xml --- old/aytests-tests-1.2.28/aytests/http.xml 2018-02-28 13:43:43.000000000 +0100 +++ new/aytests-tests-1.2.40/aytests/http.xml 2018-09-13 11:01:31.000000000 +0200 @@ -473,7 +473,7 @@ <pattern>minimal_base</pattern> </patterns> <products config:type="list"> - <listentry>SLES15</listentry> + <listentry>SLES</listentry> </products> <packages config:type="list"> <package>sudo</package> diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/aytests-tests-1.2.28/aytests/lvm.xml new/aytests-tests-1.2.40/aytests/lvm.xml --- old/aytests-tests-1.2.28/aytests/lvm.xml 2018-02-28 13:43:43.000000000 +0100 +++ new/aytests-tests-1.2.40/aytests/lvm.xml 2018-09-13 11:01:31.000000000 +0200 @@ -43,6 +43,7 @@ <location/> <feedback config:type="boolean">false</feedback> <source><![CDATA[#!/bin/sh +rm /run/libstorage-ng/lock mv /var/run/zypp.pid /var/run/zypp.sav yast clone_system mv /var/run/zypp.sav /var/run/zypp.pid @@ -65,7 +66,6 @@ </networking> <firewall> <FW_CONFIGURATIONS_EXT>apache2 apache2-ssl</FW_CONFIGURATIONS_EXT> - <FW_LOG_ACCEPT_CRIT>yes</FW_LOG_ACCEPT_CRIT> <FW_LOG_DROP_ALL>no</FW_LOG_DROP_ALL> <FW_SERVICES_EXT_TCP>8080</FW_SERVICES_EXT_TCP> <FW_SERVICES_EXT_UDP>9090</FW_SERVICES_EXT_UDP> @@ -156,7 +156,7 @@ <package>zsh</package> </remove-packages> <products config:type="list"> - <product>SLES15</product> + <product>SLES</product> </products> </software> diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/aytests-tests-1.2.28/aytests/lvm_auto.list new/aytests-tests-1.2.40/aytests/lvm_auto.list --- old/aytests-tests-1.2.28/aytests/lvm_auto.list 2018-02-28 13:43:43.000000000 +0100 +++ new/aytests-tests-1.2.40/aytests/lvm_auto.list 2018-09-13 11:01:31.000000000 +0200 @@ -1,6 +1,5 @@ lvm.sh # creates lvm partitions lvm_auto.sh # switching auto to max option (bnc#962238) -ca_mgm.sh # checking ca-management error (bnc#962328) set_passwords.sh # password are set (bsc#973639, bsc#974220, bsc#971804 and bsc#965852) keyboard.sh # sets default keyboard (bnc#891808) locale.sh # Set locale accordingly to the profile (bsc#1023774) diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/aytests-tests-1.2.28/aytests/lvm_auto.xml new/aytests-tests-1.2.40/aytests/lvm_auto.xml --- old/aytests-tests-1.2.28/aytests/lvm_auto.xml 2018-02-28 13:43:43.000000000 +0100 +++ new/aytests-tests-1.2.40/aytests/lvm_auto.xml 2018-09-13 11:01:31.000000000 +0200 @@ -23,6 +23,7 @@ <location/> <feedback config:type="boolean">false</feedback> <source><![CDATA[#!/bin/sh +rm /run/libstorage-ng/lock mv /var/run/zypp.pid /var/run/zypp.sav yast clone_system mv /var/run/zypp.sav /var/run/zypp.pid diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/aytests-tests-1.2.28/aytests/lvm_thin_pool.sh new/aytests-tests-1.2.40/aytests/lvm_thin_pool.sh --- old/aytests-tests-1.2.28/aytests/lvm_thin_pool.sh 1970-01-01 01:00:00.000000000 +0100 +++ new/aytests-tests-1.2.40/aytests/lvm_thin_pool.sh 2018-09-13 11:01:31.000000000 +0200 @@ -0,0 +1,11 @@ +#!/bin/bash + +set -e -x + +# Check if the LVM thin pool and its thin logical volumes have been created +# (bsc#1086596). +lvdisplay /dev/system/root_lv | grep "LV Pool name.*pool0" +lvdisplay /dev/system/home_lv | grep "LV Pool name.*pool0" +lvdisplay /dev/system/swap_lv | grep "LV Pool name.*pool0" +lvs | grep "pool0.* system t" +echo "AUTOYAST OK" diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/aytests-tests-1.2.28/aytests/partition.xml new/aytests-tests-1.2.40/aytests/partition.xml --- old/aytests-tests-1.2.28/aytests/partition.xml 2018-02-28 13:43:43.000000000 +0100 +++ new/aytests-tests-1.2.40/aytests/partition.xml 2018-09-13 11:01:31.000000000 +0200 @@ -63,6 +63,7 @@ <location/> <feedback config:type="boolean">false</feedback> <source><![CDATA[#!/bin/sh +rm /run/libstorage-ng/lock mv /var/run/zypp.pid /var/run/zypp.sav yast clone_system mv /var/run/zypp.sav /var/run/zypp.pid diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/aytests-tests-1.2.28/aytests/profile_sections.sh new/aytests-tests-1.2.40/aytests/profile_sections.sh --- old/aytests-tests-1.2.28/aytests/profile_sections.sh 2018-02-28 13:43:43.000000000 +0100 +++ new/aytests-tests-1.2.40/aytests/profile_sections.sh 2018-09-13 11:01:31.000000000 +0200 @@ -5,10 +5,10 @@ AUTOINST="/root/autoinst.xml" # Expected sections to be present in autoinst.xml -EXPECTED=(add-on bootloader ca_mgm deploy_image general groups host \ +EXPECTED=(add-on bootloader tftp-server deploy_image general groups host \ kdump keyboard language login_settings networking ntp-client partitioning \ printer proxy report services-manager software timezone user_defaults users\ - ssh_import) + ssh_import firewall) # Current present sections in autoinst.xml readarray -t PRESENT < <(xmlstarlet sel -N 'yast2ns=http://www.suse.com/1.0/yast2ns' --template -match "//yast2ns:profile/*" --value-of "name()" --nl $AUTOINST) diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/aytests-tests-1.2.28/aytests/shrink_partitions.sh new/aytests-tests-1.2.40/aytests/shrink_partitions.sh --- old/aytests-tests-1.2.28/aytests/shrink_partitions.sh 2018-02-28 13:43:43.000000000 +0100 +++ new/aytests-tests-1.2.40/aytests/shrink_partitions.sh 2018-09-13 11:01:31.000000000 +0200 @@ -4,5 +4,5 @@ # Check if AutoYaST displayed a warning about shrinking partitions to make them # fit (bsc#1078418). -zgrep "Some additional space" /var/log/YaST2/y2log-1.gz +zgrep "Some additional space" /var/log/YaST2/y2log*.gz echo "AUTOYAST OK" diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/aytests-tests-1.2.28/aytests/sles.list new/aytests-tests-1.2.40/aytests/sles.list --- old/aytests-tests-1.2.28/aytests/sles.list 2018-02-28 13:43:43.000000000 +0100 +++ new/aytests-tests-1.2.40/aytests/sles.list 2018-09-13 11:01:31.000000000 +0200 @@ -1,6 +1,6 @@ user.sh # vagrant user has been created root.sh # root hast /root home (bnc#878427) -#tftp.sh # files can be downloaded from tftp server FIXME: https://bugzilla.suse.com/show_bug.cgi?id=1070518 +tftp.sh # files can be downloaded from tftp server dns.sh # DNS server and network are available autoinst-userscr.sh # user scripts have been run partition.sh # partition_id order fits (bnc#886808) @@ -22,6 +22,6 @@ set_passwords.sh # password are set (bsc#973639, bsc#974220, bsc#971804 and bsc#965852) append_kernel.sh # append arguments to kernel configuration (related to bsc#968192) unsupported_language.sh # check that imported language is valid (bsc#991001) -authorized_keys.sh # check that authorized_keys were added (FATE#319471) FIXME: https://bugzilla.suse.com/show_bug.cgi?id=1075830 +authorized_keys.sh # check that authorized_keys were added (FATE#319471) btrfs_set_subvol_default_name.sh # default subvolume name is set (FATE#317775) btrfs_copy_on_write_subvolumes.sh # Set copy-on-write options in Btrfs subvolumes (FATE#320342) diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/aytests-tests-1.2.28/aytests/sles.xml new/aytests-tests-1.2.40/aytests/sles.xml --- old/aytests-tests-1.2.28/aytests/sles.xml 2018-02-28 13:43:43.000000000 +0100 +++ new/aytests-tests-1.2.40/aytests/sles.xml 2018-09-13 11:01:31.000000000 +0200 @@ -153,6 +153,7 @@ <location/> <feedback config:type="boolean">false</feedback> <source><![CDATA[#!/bin/sh +rm /run/libstorage-ng/lock mv /var/run/zypp.pid /var/run/zypp.sav test -f /root/autoinst.xml && rm /root/autoinst.xml yast clone_system @@ -802,13 +803,13 @@ <package>tftp</package> <package>bind</package> <package>syslinux</package> - <package>SuSEfirewall2</package> + <package>firewalld</package> <package>yast2-ftp-server</package> <package>yast2-firewall</package> <package>yast2-ntp-client</package> <package>yast2-printer</package> - <package>yast2-ca-management</package> <package>xmlstarlet</package> + <package>net-tools</package> <!-- needed for tfpt.sh --> </packages> <post-packages config:type="list"> <package>bind</package> @@ -837,9 +838,13 @@ <package>git-gui</package> </remove-packages> <products config:type="list"> - <listentry>SLES15</listentry> + <listentry>SLES</listentry> </products> </software> + <firewall> + <enable_firewall config:type="boolean">false</enable_firewall> + <start_firewall config:type="boolean">false</start_firewall> + </firewall> <users config:type="list"> <user> <encrypted config:type="boolean">false</encrypted> diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/aytests-tests-1.2.28/aytests/sles15.xml new/aytests-tests-1.2.40/aytests/sles15.xml --- old/aytests-tests-1.2.28/aytests/sles15.xml 2018-02-28 13:43:43.000000000 +0100 +++ new/aytests-tests-1.2.40/aytests/sles15.xml 2018-09-13 11:01:31.000000000 +0200 @@ -157,7 +157,7 @@ <pattern>minimal_base</pattern> </patterns> <products config:type="list"> - <listentry>SLES15</listentry> + <listentry>SLES</listentry> </products> </software> <ssh_import> diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/aytests-tests-1.2.28/aytests/sles15_firewalld.xml new/aytests-tests-1.2.40/aytests/sles15_firewalld.xml --- old/aytests-tests-1.2.28/aytests/sles15_firewalld.xml 2018-02-28 13:43:43.000000000 +0100 +++ new/aytests-tests-1.2.40/aytests/sles15_firewalld.xml 2018-09-13 11:01:31.000000000 +0200 @@ -181,7 +181,7 @@ <pattern>minimal_base</pattern> </patterns> <products config:type="list"> - <listentry>SLES15</listentry> + <listentry>SLES</listentry> </products> </software> <ssh_import> diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/aytests-tests-1.2.28/aytests/sles15_lvm_thin_pool.list new/aytests-tests-1.2.40/aytests/sles15_lvm_thin_pool.list --- old/aytests-tests-1.2.28/aytests/sles15_lvm_thin_pool.list 1970-01-01 01:00:00.000000000 +0100 +++ new/aytests-tests-1.2.40/aytests/sles15_lvm_thin_pool.list 2018-09-13 11:01:31.000000000 +0200 @@ -0,0 +1,3 @@ +user.sh # vagrant user has been created +lvm.sh # create lvm logical volumes +lvm_thin_pool.sh # lvm thin pool support (bsc#1086596) diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/aytests-tests-1.2.28/aytests/sles15_lvm_thin_pool.rb new/aytests-tests-1.2.40/aytests/sles15_lvm_thin_pool.rb --- old/aytests-tests-1.2.28/aytests/sles15_lvm_thin_pool.rb 1970-01-01 01:00:00.000000000 +0100 +++ new/aytests-tests-1.2.40/aytests/sles15_lvm_thin_pool.rb 2018-09-13 11:01:31.000000000 +0200 @@ -0,0 +1,5 @@ +require "aytests/spec_helper" +# This test is currently not running bnc#1086661 +describe "SLES 15 LVM thin pool checks," do + include_examples "test_scripts", "sles15_lvm_thin_pool" +end diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/aytests-tests-1.2.28/aytests/sles15_lvm_thin_pool.vars new/aytests-tests-1.2.40/aytests/sles15_lvm_thin_pool.vars --- old/aytests-tests-1.2.28/aytests/sles15_lvm_thin_pool.vars 1970-01-01 01:00:00.000000000 +0100 +++ new/aytests-tests-1.2.40/aytests/sles15_lvm_thin_pool.vars 2018-09-13 11:01:31.000000000 +0200 @@ -0,0 +1,2 @@ +INIT_SCRIPT_URL=http://{{IP}}:{{PORT}}/static/scripts/init_script.sh +SLE_GA=http://dist.suse.de/ibs/SUSE:/SLE-15:/GA/standard/ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/aytests-tests-1.2.28/aytests/sles15_lvm_thin_pool.xml new/aytests-tests-1.2.40/aytests/sles15_lvm_thin_pool.xml --- old/aytests-tests-1.2.28/aytests/sles15_lvm_thin_pool.xml 1970-01-01 01:00:00.000000000 +0100 +++ new/aytests-tests-1.2.40/aytests/sles15_lvm_thin_pool.xml 2018-09-13 11:01:31.000000000 +0200 @@ -0,0 +1,280 @@ +<?xml version="1.0"?> +<!DOCTYPE profile> +<profile xmlns="http://www.suse.com/1.0/yast2ns" xmlns:config="http://www.suse.com/1.0/configns"> + <add-on> + <add_on_products config:type="list"> + <listentry> + <media_url><![CDATA[{{SLE_GA}}]]></media_url> + <product>sle-ga</product> + <product_dir>/</product_dir> + <name>SLE GA</name> + </listentry> + </add_on_products> + </add-on> + <deploy_image> + <image_installation config:type="boolean">false</image_installation> + </deploy_image> + <firewall> + <enable_firewall config:type="boolean">false</enable_firewall> + <start_firewall config:type="boolean">false</start_firewall> + </firewall> + <general> + <mode> + <confirm config:type="boolean">false</confirm> + </mode> + <signature-handling> + <accept_file_without_checksum config:type="boolean">true</accept_file_without_checksum> + <accept_non_trusted_gpg_key config:type="boolean">true</accept_non_trusted_gpg_key> + <accept_unknown_gpg_key config:type="boolean">true</accept_unknown_gpg_key> + <accept_unsigned_file config:type="boolean">true</accept_unsigned_file> + <accept_verification_failed config:type="boolean">true</accept_verification_failed> + <import_gpg_key config:type="boolean">true</import_gpg_key> + </signature-handling> + <storage> + <start_multipath config:type="boolean">false</start_multipath> + </storage> + </general> + <keyboard> + <keymap>spanish</keymap> + </keyboard> + <language> + <language>en_US</language> + <languages/> + </language> + <partitioning config:type="list"> + <drive> + <partitions config:type="list"> + <partition> + <partition_nr config:type="integer">1</partition_nr> + <lvm_group>system</lvm_group> + <partition_type>primary</partition_type> + <size>max</size> + </partition> + </partitions> + <use>all</use> + </drive> + <drive> + <device>/dev/system</device> + <initialize config:type="boolean">true</initialize> + <is_lvm_vg config:type="boolean">true</is_lvm_vg> + <partitions config:type="list"> + <partition> + <pool config:type="boolean">true</pool> + <lv_name>pool0</lv_name> + <size>max</size> + <stripes config:type="integer">1</stripes> + <stripesize config:type="integer">8</stripesize> + </partition> + <partition> + <lv_name>root_lv</lv_name> + <mount>/</mount> + <filesystem config:type="symbol">ext4</filesystem> + <size>50%</size> + <used_pool>pool0</used_pool> + </partition> + <partition> + <lv_name>home_lv</lv_name> + <mount>/home</mount> + <filesystem config:type="symbol">ext4</filesystem> + <size>10G</size> + <used_pool>pool0</used_pool> + </partition> + <partition> + <filesystem config:type="symbol">swap</filesystem> + <lv_name>swap_lv</lv_name> + <mount>swap</mount> + <size>auto</size> + <used_pool>pool0</used_pool> + </partition> + </partitions> + <pesize>4M</pesize> + <use>all</use> + </drive> + </partitioning> + <networking> + <dhcp_options> + <dhclient_client_id/> + <dhclient_hostname_option>AUTO</dhclient_hostname_option> + </dhcp_options> + <dns> + <dhcp_hostname config:type="boolean">true</dhcp_hostname> + <domain>suse.local</domain> + <hostname>linux-nwlk</hostname> + <resolv_conf_policy>auto</resolv_conf_policy> + <write_hostname config:type="boolean">false</write_hostname> + </dns> + <interfaces config:type="list"> + <interface> + <bootproto>dhcp</bootproto> + <device>eth0</device> + <dhclient_set_default_route>yes</dhclient_set_default_route> + <startmode>auto</startmode> + </interface> + <interface> + <bootproto>static</bootproto> + <device>lo</device> + <firewall>no</firewall> + <ipaddr>127.0.0.1</ipaddr> + <netmask>255.0.0.0</netmask> + <network>127.0.0.0</network> + <prefixlen>8</prefixlen> + <startmode>nfsroot</startmode> + <usercontrol>no</usercontrol> + </interface> + </interfaces> + <ipv6 config:type="boolean">true</ipv6> + <keep_install_network config:type="boolean">true</keep_install_network> + <routing> + <ipv4_forward config:type="boolean">false</ipv4_forward> + <ipv6_forward config:type="boolean">false</ipv6_forward> + </routing> + </networking> + <ntp-client> + <ntp_policy>auto</ntp_policy> + <ntp_servers config:type="list"> + <ntp_server> + <iburst config:type="boolean">false</iburst> + <address>cz.pool.ntp.org</address> + <offline config:type="boolean">true</offline> + </ntp_server> + </ntp_servers> + <ntp_sync>systemd</ntp_sync> + </ntp-client> + <report> + <errors> + <log config:type="boolean">true</log> + <show config:type="boolean">true</show> + <timeout config:type="integer">5</timeout> + </errors> + <messages> + <log config:type="boolean">true</log> + <show config:type="boolean">true</show> + <timeout config:type="integer">5</timeout> + </messages> + <warnings> + <log config:type="boolean">true</log> + <show config:type="boolean">true</show> + <timeout config:type="integer">5</timeout> + </warnings> + <yesno_messages> + <log config:type="boolean">true</log> + <show config:type="boolean">true</show> + <timeout config:type="integer">5</timeout> + </yesno_messages> + </report> + <software> + <image/> + <install_recommended config:type="boolean">true</install_recommended> + <instsource/> + <packages config:type="list"> + <package>snapper</package> + <package>sles-release</package> + <package>shim</package> + <package>openssh</package> + <package>mokutil</package> + <package>kexec-tools</package> + <package>grub2-x86_64-efi</package> + <package>glibc</package> + <package>e2fsprogs</package> + <package>dosfstools</package> + <package>btrfsprogs</package> + <package>sudo</package> + <package>curl</package> + <package>chrony</package> + </packages> + <patterns config:type="list"> + <pattern>base</pattern> + <pattern>minimal_base</pattern> + </patterns> + <products config:type="list"> + <listentry>SLES</listentry> + </products> + </software> + <ssh_import> + <copy_config config:type="boolean">false</copy_config> + <import config:type="boolean">false</import> + </ssh_import> + <timezone> + <hwclock>UTC</hwclock> + <timezone>Europe/Berlin</timezone> + </timezone> + <user_defaults> + <expire/> + <group>100</group> + <groups/> + <home>/home</home> + <inactive>-1</inactive> + <no_groups config:type="boolean">true</no_groups> + <shell>/bin/bash</shell> + <skel>/etc/skel</skel> + <umask>022</umask> + </user_defaults> + <users config:type="list"> + <user> + <encrypted config:type="boolean">false</encrypted> + <fullname>vagrant</fullname> + <gid>100</gid> + <home>/home/vagrant</home> + <shell>/bin/bash</shell> + <uid>1000</uid> + <user_password>nots3cr3t</user_password> + <username>vagrant</username> + </user> + <user> + <encrypted config:type="boolean">false</encrypted> + <fullname>root</fullname> + <gid>0</gid> + <home>/root</home> + <shell>/bin/bash</shell> + <uid>0</uid> + <user_password>nots3cr3t</user_password> + <username>root</username> + </user> + <!-- user with uncommon home directory (not in home) (bnc#966867)--> + <user> + <encrypted config:type="boolean">false</encrypted> + <fullname>System Admin Emergency Login</fullname> + <gid>999</gid> + <home>/admin</home> + <password_settings> + <expire></expire> + <flag></flag> + <inact></inact> + <max></max> + <min></min> + <warn></warn> + </password_settings> + <shell>/bin/bash</shell> + <uid>999</uid> + <groups></groups> + <username>sysadm</username> + <user_password>testeradmin</user_password> + </user> + </users> + <scripts> + <init-scripts config:type="list"> + <script> + <filename>init_download.sh</filename> + <interpreter>shell</interpreter> + <location><![CDATA[{{INIT_SCRIPT_URL}}]]></location> + </script> + <script> + <filename>init_ssh.sh</filename> + <chrooted config:type="boolean">true</chrooted> + <interpreter>shell</interpreter> + <source><![CDATA[ + systemctl enable sshd + systemctl start sshd +]]></source> + </script> + </init-scripts> + </scripts> + <services-manager> + <default_target>multi-user</default_target> + <services> + <disable config:type="list"> + <service>sshd</service> + </disable> + </services> + </services-manager> +</profile> diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/aytests-tests-1.2.28/aytests/sles15_suse_firewall.xml new/aytests-tests-1.2.40/aytests/sles15_suse_firewall.xml --- old/aytests-tests-1.2.28/aytests/sles15_suse_firewall.xml 2018-02-28 13:43:43.000000000 +0100 +++ new/aytests-tests-1.2.40/aytests/sles15_suse_firewall.xml 2018-09-13 11:01:31.000000000 +0200 @@ -162,7 +162,7 @@ <pattern>minimal_base</pattern> </patterns> <products config:type="list"> - <listentry>SLES15</listentry> + <listentry>SLES</listentry> </products> </software> <ssh_import> diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/aytests-tests-1.2.28/aytests/sles_all_yast.xml new/aytests-tests-1.2.40/aytests/sles_all_yast.xml --- old/aytests-tests-1.2.28/aytests/sles_all_yast.xml 2018-02-28 13:43:43.000000000 +0100 +++ new/aytests-tests-1.2.40/aytests/sles_all_yast.xml 2018-09-13 11:01:31.000000000 +0200 @@ -35,7 +35,7 @@ <pattern>minimal_base</pattern> </patterns> <products config:type="list"> - <listentry>SLES15</listentry> + <listentry>SLES</listentry> </products> <packages config:type="list"> <!-- An SSH server is needed to perform the integration tests --> @@ -53,7 +53,6 @@ <package>yast2-auth-client</package> <package>yast2-auth-server</package> <package>yast2-bootloader</package> - <package>yast2-ca-management</package> <package>yast2-country</package> <package>yast2-dhcp-server</package> <package>yast2-dns-server</package> @@ -133,6 +132,7 @@ <location/> <feedback config:type="boolean">false</feedback> <source><![CDATA[#!/bin/sh +rm /run/libstorage-ng/lock mv /var/run/zypp.pid /var/run/zypp.sav yast clone_system mv /var/run/zypp.sav /var/run/zypp.pid diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/aytests-tests-1.2.28/aytests/sles_insserv.xml new/aytests-tests-1.2.40/aytests/sles_insserv.xml --- old/aytests-tests-1.2.28/aytests/sles_insserv.xml 2018-02-28 13:43:43.000000000 +0100 +++ new/aytests-tests-1.2.40/aytests/sles_insserv.xml 2018-09-13 11:01:31.000000000 +0200 @@ -35,7 +35,7 @@ <pattern>minimal_base</pattern> </patterns> <products config:type="list"> - <listentry>SLES15</listentry> + <listentry>SLES</listentry> </products> <packages config:type="list"> <!-- An SSH server is needed to perform the integration tests --> diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/aytests-tests-1.2.28/aytests/sles_mini_network.xml new/aytests-tests-1.2.40/aytests/sles_mini_network.xml --- old/aytests-tests-1.2.28/aytests/sles_mini_network.xml 2018-02-28 13:43:43.000000000 +0100 +++ new/aytests-tests-1.2.40/aytests/sles_mini_network.xml 2018-09-13 11:01:31.000000000 +0200 @@ -72,7 +72,7 @@ <package>glibc-locale</package> </packages> <products config:type="list"> - <listentry>SLES15</listentry> + <listentry>SLES</listentry> </products> </software> diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/aytests-tests-1.2.28/aytests/sles_minimal.xml new/aytests-tests-1.2.40/aytests/sles_minimal.xml --- old/aytests-tests-1.2.28/aytests/sles_minimal.xml 2018-02-28 13:43:43.000000000 +0100 +++ new/aytests-tests-1.2.40/aytests/sles_minimal.xml 2018-09-13 11:01:31.000000000 +0200 @@ -68,7 +68,7 @@ <package>glibc-locale</package> </packages> <products config:type="list"> - <listentry>SLES15</listentry> + <listentry>SLES</listentry> </products> </software> diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/aytests-tests-1.2.28/aytests/sles_minimal_network.xml new/aytests-tests-1.2.40/aytests/sles_minimal_network.xml --- old/aytests-tests-1.2.28/aytests/sles_minimal_network.xml 2018-02-28 13:43:43.000000000 +0100 +++ new/aytests-tests-1.2.40/aytests/sles_minimal_network.xml 2018-09-13 11:01:31.000000000 +0200 @@ -54,7 +54,7 @@ <package>glibc-locale</package> </packages> <products config:type="list"> - <listentry>SLES15</listentry> + <listentry>SLES</listentry> </products> </software> diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/aytests-tests-1.2.28/aytests/sles_network.list new/aytests-tests-1.2.40/aytests/sles_network.list --- old/aytests-tests-1.2.28/aytests/sles_network.list 2018-02-28 13:43:43.000000000 +0100 +++ new/aytests-tests-1.2.40/aytests/sles_network.list 2018-09-13 11:01:31.000000000 +0200 @@ -1,6 +1,6 @@ user.sh # vagrant user has been created root.sh # root hast /root home (bnc#878427) -#tftp.sh # files can be downloaded from tftp server FIXME:https://bugzilla.suse.com/show_bug.cgi?id=1064403 +tftp.sh # files can be downloaded from tftp server dns.sh # DNS server and network are available autoinst-userscr.sh # user scripts have been run partition.sh # partition_id order fits (bnc#886808) @@ -10,7 +10,6 @@ ntp_sync.sh # ntp time syncing has been passed (bnc#935066) installation_no_snapshot.sh # snapshot has not been created and has not been exported (bnc#1039268) no_reinstall.sh # do no reinstall packages in second stage (fate#319086) -profile_sections.sh # all expected sections are present in autoinst.xml (bnc#941948) kdump_default.sh # Taking proposed values if <crash_kernel>, <general> have not been defined in AutoYaST configuration file. (bnc#997448) handle_zypper_pkg_gpg_check.sh # handles zypper's pkgGpgCheck callback during installation (bsc#948608) restart_services.sh # do no restart dbus and wickedd* services (bsc#944349) diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/aytests-tests-1.2.28/aytests/sles_network.xml new/aytests-tests-1.2.40/aytests/sles_network.xml --- old/aytests-tests-1.2.28/aytests/sles_network.xml 2018-02-28 13:43:43.000000000 +0100 +++ new/aytests-tests-1.2.40/aytests/sles_network.xml 2018-09-13 11:01:31.000000000 +0200 @@ -135,6 +135,7 @@ <location/> <feedback config:type="boolean">false</feedback> <source><![CDATA[#!/bin/sh +rm /run/libstorage-ng/lock mv /var/run/zypp.pid /var/run/zypp.sav yast clone_system mv /var/run/zypp.sav /var/run/zypp.pid @@ -765,7 +766,7 @@ <pattern>minimal_base</pattern> </patterns> <products config:type="list"> - <listentry>SLES15</listentry> + <listentry>SLES</listentry> </products> <packages config:type="list"> <!-- The following packages are needed to run postinstall.sh --> @@ -773,8 +774,9 @@ <package>ca-certificates-mozilla</package> <package>syslinux</package> <package>yast2-printer</package> - <package>yast2-ca-management</package> <package>xmlstarlet</package> + <package>firewalld</package> + <package>net-tools</package> <!-- needed for tfpt.sh --> </packages> </software> <users config:type="list"> diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/aytests-tests-1.2.28/aytests/sles_network_without_hosts.xml new/aytests-tests-1.2.40/aytests/sles_network_without_hosts.xml --- old/aytests-tests-1.2.28/aytests/sles_network_without_hosts.xml 2018-02-28 13:43:43.000000000 +0100 +++ new/aytests-tests-1.2.40/aytests/sles_network_without_hosts.xml 2018-09-13 11:01:31.000000000 +0200 @@ -131,7 +131,7 @@ <package>iproute2</package> </packages> <products config:type="list"> - <listentry>SLES15</listentry> + <listentry>SLES</listentry> </products> </software> <users config:type="list"> diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/aytests-tests-1.2.28/aytests/storage_ng_automated_lvm.xml new/aytests-tests-1.2.40/aytests/storage_ng_automated_lvm.xml --- old/aytests-tests-1.2.28/aytests/storage_ng_automated_lvm.xml 2018-02-28 13:43:43.000000000 +0100 +++ new/aytests-tests-1.2.40/aytests/storage_ng_automated_lvm.xml 2018-09-13 11:01:31.000000000 +0200 @@ -67,7 +67,7 @@ <pattern>minimal_base</pattern> </patterns> <products config:type="list"> - <listentry>SLES15</listentry> + <listentry>SLES</listentry> </products> <packages config:type="list"> <!-- An SSH server is needed to perform the integration tests --> diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/aytests-tests-1.2.28/aytests/storage_ng_automated_partitioning.xml new/aytests-tests-1.2.40/aytests/storage_ng_automated_partitioning.xml --- old/aytests-tests-1.2.28/aytests/storage_ng_automated_partitioning.xml 2018-02-28 13:43:43.000000000 +0100 +++ new/aytests-tests-1.2.40/aytests/storage_ng_automated_partitioning.xml 2018-09-13 11:01:31.000000000 +0200 @@ -52,7 +52,7 @@ <pattern>minimal_base</pattern> </patterns> <products config:type="list"> - <listentry>SLES15</listentry> + <listentry>SLES</listentry> </products> <packages config:type="list"> <!-- An SSH server is needed to perform the integration tests --> diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/aytests-tests-1.2.28/aytests/storage_ng_lvm.xml new/aytests-tests-1.2.40/aytests/storage_ng_lvm.xml --- old/aytests-tests-1.2.28/aytests/storage_ng_lvm.xml 2018-02-28 13:43:43.000000000 +0100 +++ new/aytests-tests-1.2.40/aytests/storage_ng_lvm.xml 2018-09-13 11:01:31.000000000 +0200 @@ -67,7 +67,7 @@ <pattern>base</pattern> </patterns> <products config:type="list"> - <listentry>SLES15</listentry> + <listentry>SLES</listentry> </products> <packages config:type="list"> <!-- An SSH server is needed to perform the integration tests --> @@ -201,6 +201,7 @@ <location/> <feedback config:type="boolean">false</feedback> <source><![CDATA[#!/bin/sh +rm /run/libstorage-ng/lock mv /var/run/zypp.pid /var/run/zypp.sav test -f /root/autoinst.xml && rm /root/autoinst.xml yast clone_system diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/aytests-tests-1.2.28/aytests/storage_ng_minimal.xml new/aytests-tests-1.2.40/aytests/storage_ng_minimal.xml --- old/aytests-tests-1.2.28/aytests/storage_ng_minimal.xml 2018-02-28 13:43:43.000000000 +0100 +++ new/aytests-tests-1.2.40/aytests/storage_ng_minimal.xml 2018-09-13 11:01:31.000000000 +0200 @@ -62,7 +62,7 @@ <pattern>minimal_base</pattern> </patterns> <products config:type="list"> - <listentry>SLES15</listentry> + <listentry>SLES</listentry> </products> <packages config:type="list"> <!-- An SSH server is needed to perform the integration tests --> diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/aytests-tests-1.2.28/aytests/storage_ng_plain_partitions.xml new/aytests-tests-1.2.40/aytests/storage_ng_plain_partitions.xml --- old/aytests-tests-1.2.28/aytests/storage_ng_plain_partitions.xml 2018-02-28 13:43:43.000000000 +0100 +++ new/aytests-tests-1.2.40/aytests/storage_ng_plain_partitions.xml 2018-09-13 11:01:31.000000000 +0200 @@ -54,7 +54,7 @@ <pattern>minimal_base</pattern> </patterns> <products config:type="list"> - <listentry>SLES15</listentry> + <listentry>SLES</listentry> </products> <packages config:type="list"> <!-- An SSH server is needed to perform the integration tests --> @@ -153,6 +153,7 @@ <location/> <feedback config:type="boolean">false</feedback> <source><![CDATA[#!/bin/sh +rm /run/libstorage-ng/lock mv /var/run/zypp.pid /var/run/zypp.sav test -f /root/autoinst.xml && rm /root/autoinst.xml yast clone_system diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/aytests-tests-1.2.28/aytests/storage_ng_raid.xml new/aytests-tests-1.2.40/aytests/storage_ng_raid.xml --- old/aytests-tests-1.2.28/aytests/storage_ng_raid.xml 2018-02-28 13:43:43.000000000 +0100 +++ new/aytests-tests-1.2.40/aytests/storage_ng_raid.xml 2018-09-13 11:01:31.000000000 +0200 @@ -66,7 +66,7 @@ <pattern>minimal_base</pattern> </patterns> <products config:type="list"> - <listentry>SLES15</listentry> + <listentry>SLES</listentry> </products> <packages config:type="list"> <!-- An SSH server is needed to perform the integration tests --> diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/aytests-tests-1.2.28/aytests/tftp.xml new/aytests-tests-1.2.40/aytests/tftp.xml --- old/aytests-tests-1.2.28/aytests/tftp.xml 2018-02-28 13:43:43.000000000 +0100 +++ new/aytests-tests-1.2.40/aytests/tftp.xml 2018-09-13 11:01:31.000000000 +0200 @@ -146,7 +146,7 @@ <package>tftp</package> </packages> <products config:type="list"> - <product>SLES15</product> + <product>SLES</product> </products> </software> diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/aytests-tests-1.2.28/aytests/unsupported_modules.sh new/aytests-tests-1.2.40/aytests/unsupported_modules.sh --- old/aytests-tests-1.2.28/aytests/unsupported_modules.sh 2018-02-28 13:43:43.000000000 +0100 +++ new/aytests-tests-1.2.40/aytests/unsupported_modules.sh 2018-09-13 11:01:31.000000000 +0200 @@ -2,4 +2,4 @@ set -e -x zgrep "Could not process these unsupported profile sections: \[\"autofs\", \"restore\", \"sshd\"\]"\ - /var/log/YaST2/y2log-1.gz && echo "AUTOYAST OK" + /var/log/YaST2/* && echo "AUTOYAST OK" diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/aytests-tests-1.2.28/aytests/upgrade_sles11.upgrade_xml new/aytests-tests-1.2.40/aytests/upgrade_sles11.upgrade_xml --- old/aytests-tests-1.2.28/aytests/upgrade_sles11.upgrade_xml 2018-02-28 13:43:43.000000000 +0100 +++ new/aytests-tests-1.2.40/aytests/upgrade_sles11.upgrade_xml 2018-09-13 11:01:31.000000000 +0200 @@ -50,19 +50,6 @@ <pre-scripts config:type="list"> <script> - <filename>1_prescript.sh</filename> - <interpreter>shell</interpreter> - <location/> - <feedback config:type="boolean">false</feedback> - <feedback_type>error</feedback_type> - <source><![CDATA[#!/bin/sh -# Due the DUD yast2-ca-managegment has been installed into inst-sys too. -# This confuses AutoYaST due missing additional packages like some perl modules in inst-sys. -# So we are removing the affected ca-management code again. -rm /usr/share/YaST2/clients/ca_mgm_auto.rb - ]]></source> - </script> - <script> <filename>2_prescript.sh</filename> <interpreter>shell</interpreter> <location/> diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/aytests-tests-1.2.28/package/aytests-tests.changes new/aytests-tests-1.2.40/package/aytests-tests.changes --- old/aytests-tests-1.2.28/package/aytests-tests.changes 2018-02-28 13:43:43.000000000 +0100 +++ new/aytests-tests-1.2.40/package/aytests-tests.changes 2018-09-13 11:01:31.000000000 +0200 @@ -1,4 +1,81 @@ ------------------------------------------------------------------- +Thu Sep 13 08:26:42 UTC 2018 - riafarov@suse.com + +- Check log messages in all log archives +- 1.2.40 + +------------------------------------------------------------------- +Thu Aug 30 07:33:44 UTC 2018 - riafarov@suse.com + +- Look for unsupported sections message in all log files +- 1.2.39 + +------------------------------------------------------------------- +Tue May 15 16:51:31 CEST 2018 - schubi@suse.de + +- Timing issue in systemctl: Dalay of service start. +- Removed sles15_lvm_thin_pool from jenkins list because it cannot + run. +- 1.2.38 + +------------------------------------------------------------------- +Mon Apr 16 15:13:14 CEST 2018 - schubi@suse.de + +- Removed libstorage-ng lock file /run/libstorage-ng/lock in order + to run "yast clone_system" while installation. +- 1.2.37 + +------------------------------------------------------------------- +Thu Apr 12 15:17:58 UTC 2018 - igonzalezsosa@suse.com + +- Add a new scenario using a LVM setup with a thin pool + (bsc#1086596). +- 1.2.36 + +------------------------------------------------------------------- +Tue Apr 3 06:54:16 UTC 2018 - riafarov@suse.com + +- Remove FW_LOG_ACCEPT_CRIT from lvm profile +- 1.2.35 + +------------------------------------------------------------------- +Mon Mar 26 15:33:12 UTC 2018 - cwh@suse.com + +- Adapted btrfs_snapshots.sh to the new format used in fstab. +- 1.2.34 + +------------------------------------------------------------------- +Mon Mar 12 14:57:40 CET 2018 - schubi@suse.de + +- Removed profile_sections.sh from sles_network.rb test due missing + firewall settings. Test sles.rb is already calling this check. +- 1.2.33 + +------------------------------------------------------------------- +Wed Mar 7 12:04:13 CET 2018 - schubi@suse.de + +- Renaming base product name (SLES15 -> SLES) (bsc#1084259) +- 1.2.32 + +------------------------------------------------------------------- +Wed Mar 7 09:32:05 CET 2018 - schubi@suse.de + +- Adapting firewall to SLES15. +- 1.2.31 + +------------------------------------------------------------------- +Tue Mar 6 14:02:10 CET 2018 - schubi@suse.de + +- Adapted testcases. (tftp-server, removed ca-management,...) +- 1.2.30 + +------------------------------------------------------------------- +Wed Feb 28 16:56:21 UTC 2018 - riafarov@suse.com + +- Adjust firewall.sh for firewalld +- 1.2.29 + +------------------------------------------------------------------- Wed Feb 28 12:39:39 UTC 2018 - riafarov@suse.com - Adjust lvm ay test for ntp and firewall changes diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/aytests-tests-1.2.28/package/aytests-tests.spec new/aytests-tests-1.2.40/package/aytests-tests.spec --- old/aytests-tests-1.2.28/package/aytests-tests.spec 2018-02-28 13:43:43.000000000 +0100 +++ new/aytests-tests-1.2.40/package/aytests-tests.spec 2018-09-13 11:01:31.000000000 +0200 @@ -15,9 +15,8 @@ # Please submit bugfixes or comments via http://bugs.opensuse.org/ # - Name: aytests-tests -Version: 1.2.28 +Version: 1.2.40 Release: 0 BuildRoot: %{_tmppath}/%{name}-%{version}-build