Hi, I'm trying to build FF3.1 beta w/ subpixel hinting through the BS. I've modified the spec file and added all the source files into the repository. However, I'm missing autoconf213 in the Opensuse 11.0 and 11.1 repositories. Sure enough though, its provided by the mozilla repo and not the official repository. So how can I link this particular RPM to my build environment? Is there a way to install this? Would appreciate some help! :)
-Anshul
On Wed, Mar 25, 2009 at 10:53 PM, Anshul Jain anshulajain@gmail.com wrote:
Hi, I'm trying to build FF3.1 beta w/ subpixel hinting through the BS. I've modified the spec file and added all the source files into the repository. However, I'm missing autoconf213 in the Opensuse 11.0 and 11.1 repositories. Sure enough though, its provided by the mozilla repo and not the official repository. So how can I link this particular RPM to my build environment? Is there a way to install this? Would appreciate some help! :)
-Anshul
There is a link that says something about linking to another project. More importantly, you might not be allowed to build it with subpixel hinting in obs as it violates patents. Or at the very least have potential legal problems. I'm sure there are others that can comment on the list.
Stephen
On Thu, Mar 26, 2009 at 10:33 AM, Stephen Shaw sshaw@decriptor.com wrote:
On Wed, Mar 25, 2009 at 10:53 PM, Anshul Jain anshulajain@gmail.com wrote:
Hi, I'm trying to build FF3.1 beta w/ subpixel hinting through the BS. I've modified the spec file and added all the source files into the repository. However, I'm missing autoconf213 in the Opensuse 11.0 and 11.1 repositories. Sure enough though, its provided by the mozilla repo and not the official repository. So how can I link this particular RPM to my build environment? Is there a way to install this? Would appreciate some help! :)
-Anshul
There is a link that says something about linking to another project. More importantly, you might not be allowed to build it with subpixel hinting in obs as it violates patents. Or at the very least have potential legal problems. I'm sure there are others that can comment on the list.
Stephen
Stephen, Thanks for the prompt reply, can you direct me to that link? As far as subpixel hinting is concerned, if it violates patents...I'll remove it.
Regards Anshul
On Wed, Mar 25, 2009 at 11:06 PM, Anshul Jain anshulajain@gmail.com wrote:
On Thu, Mar 26, 2009 at 10:33 AM, Stephen Shaw sshaw@decriptor.com wrote:
On Wed, Mar 25, 2009 at 10:53 PM, Anshul Jain anshulajain@gmail.com wrote:
Hi, I'm trying to build FF3.1 beta w/ subpixel hinting through the BS. I've modified the spec file and added all the source files into the repository. However, I'm missing autoconf213 in the Opensuse 11.0 and 11.1 repositories. Sure enough though, its provided by the mozilla repo and not the official repository. So how can I link this particular RPM to my build environment? Is there a way to install this? Would appreciate some help! :)
-Anshul
There is a link that says something about linking to another project. More importantly, you might not be allowed to build it with subpixel hinting in obs as it violates patents. Or at the very least have potential legal problems. I'm sure there are others that can comment on the list.
Stephen
Stephen, Thanks for the prompt reply, can you direct me to that link? As far as subpixel hinting is concerned, if it violates patents...I'll remove it.
Regards Anshul --
Here is a link about the subpixel hinting stuff - http://opensuse-community.org/SubpixelHinting
As for the linking to other packages in other projects: Under the list of your current packages in your project (about the middle of the screen), there are 2 links. One is to add a new package, [Add Package], and the second is to link to another package in another project, [Link Package from other Project]. Once you click on it, you will see 3 boxes. The first one is the name of the project that you want to connect to, the second is the name of the package, and the third I usually leave blank, but its for if you want to name it differently in your local project.
Stephen
On Thu, Mar 26, 2009 at 10:45 AM, Stephen Shaw sshaw@decriptor.com wrote:
On Wed, Mar 25, 2009 at 11:06 PM, Anshul Jain anshulajain@gmail.com wrote:
On Thu, Mar 26, 2009 at 10:33 AM, Stephen Shaw sshaw@decriptor.com wrote:
On Wed, Mar 25, 2009 at 10:53 PM, Anshul Jain anshulajain@gmail.com wrote:
Hi, I'm trying to build FF3.1 beta w/ subpixel hinting through the BS. I've modified the spec file and added all the source files into the repository. However, I'm missing autoconf213 in the Opensuse 11.0 and 11.1 repositories. Sure enough though, its provided by the mozilla repo and not the official repository. So how can I link this particular RPM to my build environment? Is there a way to install this? Would appreciate some help! :)
-Anshul
There is a link that says something about linking to another project. More importantly, you might not be allowed to build it with subpixel hinting in obs as it violates patents. Or at the very least have potential legal problems. I'm sure there are others that can comment on the list.
Stephen
Stephen, Thanks for the prompt reply, can you direct me to that link? As far as subpixel hinting is concerned, if it violates patents...I'll remove it.
Regards Anshul --
Here is a link about the subpixel hinting stuff - http://opensuse-community.org/SubpixelHinting
As for the linking to other packages in other projects: Under the list of your current packages in your project (about the middle of the screen), there are 2 links. One is to add a new package, [Add Package], and the second is to link to another package in another project, [Link Package from other Project]. Once you click on it, you will see 3 boxes. The first one is the name of the project that you want to connect to, the second is the name of the package, and the third I usually leave blank, but its for if you want to name it differently in your local project.
Stephen
Stephen, I found the right place to link the file, however...I couldn't quite add autoconf213 which is present in this link:- http://download.opensuse.org/repositories/mozilla/openSUSE_11.0/noarch/autco.......
I tried adding "mozilla" and even "http://download.opensuse.org/repositories/mozilla/openSUSE_11.0/" into the 1st line...and in the 2nd line I added the file name...autoconf.xxx. It still won't take..any suggestions?
-Anshul
Hi, I'm trying to build FF3.1 beta w/ subpixel hinting through the BS. I've modified the spec file and added all the source files into the repository. However, I'm missing autoconf213 in the Opensuse 11.0 and 11.1 repositories. Sure enough though, its provided by the mozilla repo and not the official repository. So how can I link this particular RPM to my build environment? Is there a way to install this? Would appreciate some help! :)
-Anshul
There is a link that says something about linking to another project. More importantly, you might not be allowed to build it with subpixel hinting in obs as it violates patents. Or at the very least have potential legal problems. I'm sure there are others that can comment on the list.
Stephen
Stephen, Thanks for the prompt reply, can you direct me to that link? As far as subpixel hinting is concerned, if it violates patents...I'll remove it.
Regards Anshul --
Here is a link about the subpixel hinting stuff - http://opensuse-community.org/SubpixelHinting
As for the linking to other packages in other projects: Under the list of your current packages in your project (about the middle of the screen), there are 2 links. One is to add a new package, [Add Package], and the second is to link to another package in another project, [Link Package from other Project]. Once you click on it, you will see 3 boxes. The first one is the name of the project that you want to connect to, the second is the name of the package, and the third I usually leave blank, but its for if you want to name it differently in your local project.
Stephen
Stephen, I found the right place to link the file, however...I couldn't quite add autoconf213 which is present in this link:- http://download.opensuse.org/repositories/mozilla/openSUSE_11.0/noarch/autco.......
I tried adding "mozilla" and even "http://download.opensuse.org/repositories/mozilla/openSUSE_11.0/" into the 1st line...and in the 2nd line I added the file name...autoconf.xxx. It still won't take..any suggestions?
-Anshul
What you need is the build service project name. Its probably something like Mozilla.
Stephen
On Thu, Mar 26, 2009 at 11:01 AM, Stephen Shaw sshaw@decriptor.com wrote:
Hi, I'm trying to build FF3.1 beta w/ subpixel hinting through the BS. I've modified the spec file and added all the source files into the repository. However, I'm missing autoconf213 in the Opensuse 11.0 and 11.1 repositories. Sure enough though, its provided by the mozilla repo and not the official repository. So how can I link this particular RPM to my build environment? Is there a way to install this? Would appreciate some help! :)
-Anshul
There is a link that says something about linking to another project. More importantly, you might not be allowed to build it with subpixel hinting in obs as it violates patents. Or at the very least have potential legal problems. I'm sure there are others that can comment on the list.
Stephen
Stephen, Thanks for the prompt reply, can you direct me to that link? As far as subpixel hinting is concerned, if it violates patents...I'll remove it.
Regards Anshul --
Here is a link about the subpixel hinting stuff - http://opensuse-community.org/SubpixelHinting
As for the linking to other packages in other projects: Under the list of your current packages in your project (about the middle of the screen), there are 2 links. One is to add a new package, [Add Package], and the second is to link to another package in another project, [Link Package from other Project]. Once you click on it, you will see 3 boxes. The first one is the name of the project that you want to connect to, the second is the name of the package, and the third I usually leave blank, but its for if you want to name it differently in your local project.
Stephen
Stephen, I found the right place to link the file, however...I couldn't quite add autoconf213 which is present in this link:- http://download.opensuse.org/repositories/mozilla/openSUSE_11.0/noarch/autco.......
I tried adding "mozilla" and even "http://download.opensuse.org/repositories/mozilla/openSUSE_11.0/" into the 1st line...and in the 2nd line I added the file name...autoconf.xxx. It still won't take..any suggestions?
-Anshul
What you need is the build service project name. Its probably something like Mozilla.
Stephen
It could be "Mozilla", "mozilla" or "mozilla/openSUSE_11.0"...neither of them works..
-Anshul
> Hi, > I'm trying to build FF3.1 beta w/ subpixel hinting through the BS. > I've modified the spec file and added all the source files into the > repository. However, I'm missing autoconf213 in the Opensuse 11.0 and > 11.1 repositories. Sure enough though, its provided by the mozilla > repo and not the official repository. So how can I link this > particular RPM to my build environment? Is there a way to install > this? Would appreciate some help! :) > > -Anshul > --
There is a link that says something about linking to another project. More importantly, you might not be allowed to build it with subpixel hinting in obs as it violates patents. Or at the very least have potential legal problems. I'm sure there are others that can comment on the list.
Stephen
Stephen, Thanks for the prompt reply, can you direct me to that link? As far as subpixel hinting is concerned, if it violates patents...I'll remove it.
Regards Anshul --
Here is a link about the subpixel hinting stuff - http://opensuse-community.org/SubpixelHinting
As for the linking to other packages in other projects: Under the list of your current packages in your project (about the middle of the screen), there are 2 links. One is to add a new package, [Add Package], and the second is to link to another package in another project, [Link Package from other Project]. Once you click on it, you will see 3 boxes. The first one is the name of the project that you want to connect to, the second is the name of the package, and the third I usually leave blank, but its for if you want to name it differently in your local project.
Stephen
Stephen, I found the right place to link the file, however...I couldn't quite add autoconf213 which is present in this link:- http://download.opensuse.org/repositories/mozilla/openSUSE_11.0/noarch/autco.......
I tried adding "mozilla" and even "http://download.opensuse.org/repositories/mozilla/openSUSE_11.0/" into the 1st line...and in the 2nd line I added the file name...autoconf.xxx. It still won't take..any suggestions?
-Anshul
What you need is the build service project name. Its probably something like Mozilla.
Stephen
It could be "Mozilla", "mozilla" or "mozilla/openSUSE_11.0"...neither of them works..
-Anshul
the project name is (first box): mozilla
the package is(second box): autoconf213
That worked for my project.
Stephen
On Thu, Mar 26, 2009 at 11:23 AM, Stephen Shaw sshaw@decriptor.com wrote:
>> Hi, >> I'm trying to build FF3.1 beta w/ subpixel hinting through the BS. >> I've modified the spec file and added all the source files into the >> repository. However, I'm missing autoconf213 in the Opensuse 11.0 and >> 11.1 repositories. Sure enough though, its provided by the mozilla >> repo and not the official repository. So how can I link this >> particular RPM to my build environment? Is there a way to install >> this? Would appreciate some help! :) >> >> -Anshul >> -- > > There is a link that says something about linking to another project. > More importantly, you might not be allowed to build it with subpixel > hinting in obs as it violates patents. Or at the very least have > potential legal problems. I'm sure there are others that can comment > on the list. > > Stephen >
Stephen, Thanks for the prompt reply, can you direct me to that link? As far as subpixel hinting is concerned, if it violates patents...I'll remove it.
Regards Anshul --
Here is a link about the subpixel hinting stuff - http://opensuse-community.org/SubpixelHinting
As for the linking to other packages in other projects: Under the list of your current packages in your project (about the middle of the screen), there are 2 links. One is to add a new package, [Add Package], and the second is to link to another package in another project, [Link Package from other Project]. Once you click on it, you will see 3 boxes. The first one is the name of the project that you want to connect to, the second is the name of the package, and the third I usually leave blank, but its for if you want to name it differently in your local project.
Stephen
Stephen, I found the right place to link the file, however...I couldn't quite add autoconf213 which is present in this link:- http://download.opensuse.org/repositories/mozilla/openSUSE_11.0/noarch/autco.......
I tried adding "mozilla" and even "http://download.opensuse.org/repositories/mozilla/openSUSE_11.0/" into the 1st line...and in the 2nd line I added the file name...autoconf.xxx. It still won't take..any suggestions?
-Anshul
What you need is the build service project name. Its probably something like Mozilla.
Stephen
It could be "Mozilla", "mozilla" or "mozilla/openSUSE_11.0"...neither of them works..
-Anshul
the project name is (first box): mozilla
the package is(second box): autoconf213
That worked for my project.
Stephen
Thanks...that worked :) Now to check if the system-cairo enabled xulrunner for mozilla will build against the autconf213 rpm.
-Anshul
buildservice@lists.opensuse.org
-
Anshul Jain -
Stephen Shaw