[opensuse-buildservice] Debian packages build, but are not published
Hi there, I have problems with building debian packages. I am new to OBS and packaging in general, so I may be overlooking something very obvious. I have begun to build packages for multiple distros, for example in this small project: https://build.opensuse.org/package/show/home:rgerhards/libestr As you can see, it builds for both RPM and DEB based systems. Unfortunately, the download page only shows the RPM-based distros: https://software.opensuse.org//download.html?project=home%3Argerhards&package=libestr However, the .deb's are also built: https://download.opensuse.org/repositories/home:/rgerhards/xUbuntu_16.10/ Some additional info may be found here (not sure if it is useful): https://twitter.com/obshq/status/937073469782597632 I have disabled all DEB based distributions, waited several hours (> 4), re-enabled them and then waited for about a day without any improvement. Is this a problem with OBS or am I doing something wrong? Any advise would be deeply appreciated! Many thanks, Rainer Gerhards -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner@opensuse.org
On mercredi, 6 décembre 2017 10.22:33 h CET Rainer Gerhards wrote:
Hi there,
I have problems with building debian packages. I am new to OBS and packaging in general, so I may be overlooking something very obvious.
I have begun to build packages for multiple distros, for example in this small project:
https://build.opensuse.org/package/show/home:rgerhards/libestr
As you can see, it builds for both RPM and DEB based systems. Unfortunately, the download page only shows the RPM-based distros: https://software.opensuse.org//download.html?project=home%3Argerhards&packag e=libestr
However, the .deb's are also built:
https://download.opensuse.org/repositories/home:/rgerhards/xUbuntu_16.10/
Some additional info may be found here (not sure if it is useful): https://twitter.com/obshq/status/937073469782597632
I have disabled all DEB based distributions, waited several hours (> 4), re-enabled them and then waited for about a day without any improvement. Is this a problem with OBS or am I doing something wrong? Any advise would be deeply appreciated!
Many thanks,
Rainer Gerhards
Seems that everything is ok now I'm seeing package in xUbuntu_16.10 and also https://download.opensuse.org/repositories/home:/rgerhards/xUbuntu_17.10/ -- Bruno Friedmann Ioda-Net Sàrl www.ioda-net.ch Bareos Partner, openSUSE Member, fsfe fellowship GPG KEY : D5C9B751C4653227 irc: tigerfoot -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner@opensuse.org
2017-12-06 11:05 GMT+01:00 Bruno Friedmann
On mercredi, 6 décembre 2017 10.22:33 h CET Rainer Gerhards wrote:
Hi there,
I have problems with building debian packages. I am new to OBS and packaging in general, so I may be overlooking something very obvious.
I have begun to build packages for multiple distros, for example in this small project:
https://build.opensuse.org/package/show/home:rgerhards/libestr
As you can see, it builds for both RPM and DEB based systems. Unfortunately, the download page only shows the RPM-based distros: https://software.opensuse.org//download.html?project=home%3Argerhards&packag e=libestr
However, the .deb's are also built:
https://download.opensuse.org/repositories/home:/rgerhards/xUbuntu_16.10/
Some additional info may be found here (not sure if it is useful): https://twitter.com/obshq/status/937073469782597632
I have disabled all DEB based distributions, waited several hours (> 4), re-enabled them and then waited for about a day without any improvement. Is this a problem with OBS or am I doing something wrong? Any advise would be deeply appreciated!
Many thanks,
Rainer Gerhards
Seems that everything is ok now I'm seeing package in xUbuntu_16.10 and also https://download.opensuse.org/repositories/home:/rgerhards/xUbuntu_17.10/
Thanks Bruno, but shouldn't the packages be also visible via the "Distro-Selection page"? There, they are not: https://software.opensuse.org//download.html?project=home%3Argerhards&package=libestr I think for other packages I have seen that the deb distros are also included, together with instructions for the users on how to apply them to their system. Rainer -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner@opensuse.org
Wed, 06 Dec 2017 16:18:00 +0300 Rainer Gerhards
2017-12-06 11:05 GMT+01:00 Bruno Friedmann
: On mercredi, 6 décembre 2017 10.22:33 h CET Rainer Gerhards wrote:
Hi there,
I have problems with building debian packages. I am new to OBS and packaging in general, so I may be overlooking something very obvious.
I have begun to build packages for multiple distros, for example in this small project:
https://build.opensuse.org/package/show/home:rgerhards/libestr
As you can see, it builds for both RPM and DEB based systems. Unfortunately, the download page only shows the RPM-based distros: https://software.opensuse.org//download.html?project=home%3Argerhards&packag e=libestr
However, the .deb's are also built:
https://download.opensuse.org/repositories/home:/rgerhards/xUbuntu_16.10/
Some additional info may be found here (not sure if it is useful): https://twitter.com/obshq/status/937073469782597632
I have disabled all DEB based distributions, waited several hours (> 4), re-enabled them and then waited for about a day without any improvement. Is this a problem with OBS or am I doing something wrong? Any advise would be deeply appreciated!
Many thanks,
Rainer Gerhards
Seems that everything is ok now I'm seeing package in xUbuntu_16.10 and also https://download.opensuse.org/repositories/home:/rgerhards/xUbuntu_17.10/
Thanks Bruno, but shouldn't the packages be also visible via the "Distro-Selection page"?
There, they are not: https://software.opensuse.org//download.html?project=home%3Argerhards&package=libestr
I think for other packages I have seen that the deb distros are also included, together with instructions for the users on how to apply them to their system.
Rainer -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner@opensuse.org
-- Best regards, Dmitriy Perlow -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner@opensuse.org
2017-12-06 19:16 GMT+01:00 Dmitriy A. Perlow
Wed, 06 Dec 2017 16:18:00 +0300 Rainer Gerhards
напісаў(ла): Hello.
Please use package name not project/source one: https://software.opensuse.org//download.html?project=home%3Argerhards&package=libestr0
thanks, that helps a lot. Unfortunately, the link stems back to the "Download Package" link from this page: https://build.opensuse.org/package/show/home:rgerhards/libestr Is there any way to fix the link on the OBS page itself? Maybe I have done something wrong with the .deb (libestr0 is traditionally used in debs, so I cannot/want not to change that). Thanks again, Rainer -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner@opensuse.org
On Dez 07 2017, Rainer Gerhards
Unfortunately, the link stems back to the "Download Package" link from this page:
https://build.opensuse.org/package/show/home:rgerhards/libestr
That link really is confusing, since you can only download the source package from there (and Debian doesn't have the concept of a source package, apparently). Andreas. -- Andreas Schwab, schwab@linux-m68k.org GPG Key fingerprint = 58CA 54C7 6D53 942B 1756 01D3 44D5 214B 8276 4ED5 "And now for something completely different." -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner@opensuse.org
participants (4)
-
Andreas Schwab
-
Bruno Friedmann
-
Dmitriy A. Perlow
-
Rainer Gerhards