https://bugzilla.novell.com/show_bug.cgi?id=288078#c9
--- Comment #9 from Mike Myers 2007-06-28 12:10:58 MST ---
BTW, PMP is working for me on my SI3132 controller, but it seems to have a real
hard time coming up. Here is an except from the system startup. Why is this
happening?
ata7.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata7.01: hard resetting port
ata7.01: SATA link down (SStatus 0 SControl 300)
ata7.02: hard resetting port
ata7.02: softreset failed (SRST command error)
ata7.02: follow-up softreset failed, retrying in 5 secs
ata7.02: hard resetting port
ata7.02: COMRESET failed (errno=-5)
ata7.02: reset failed, giving up
ata7.15: hard resetting port
ata7: controller in dubious state, performing PORT_RST
ata7.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
ata7.00: hard resetting port
ata7.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata7.01: hard resetting port
ata7.01: SATA link down (SStatus 0 SControl 300)
ata7.02: hard resetting port
ata7.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata7.03: hard resetting port
ata7.03: softreset failed (SRST command error)
ata7.03: follow-up softreset failed, retrying in 5 secs
ata7.03: hard resetting port
ata7.03: hardreset failed (port not ready)
ata7.03: reset failed, giving up
ata7.15: hard resetting port
ata7: controller in dubious state, performing PORT_RST
ata7.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
ata7.00: hard resetting port
ata7.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata7.01: hard resetting port
ata7.01: SATA link down (SStatus 0 SControl 300)
ata7.02: hard resetting port
ata7.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata7.03: hard resetting port
ata7.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata7.04: hard resetting port
ata7.04: softreset failed (SRST command error)
ata7.04: follow-up softreset failed, retrying in 5 secs
ata7.04: hard resetting port
ata7.04: hardreset failed (port not ready)
ata7.04: reset failed, giving up
ata7.15: hard resetting port
ata7: controller in dubious state, performing PORT_RST
ata7.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
ata7.00: hard resetting port
ata7.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata7.01: hard resetting port
ata7.01: SATA link down (SStatus 0 SControl 300)
ata7.02: hard resetting port
ata7.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata7.03: hard resetting port
ata7.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata7.04: hard resetting port
ata7.04: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata7.00: ATA-7, max UDMA/133, 976773168 sectors: LBA48 NCQ (depth 31/32)
ata7.00: ata7: dev 0 multi count 16
ata7.00: configured for UDMA/100
ata7.02: ATA-7, max UDMA/133, 976773168 sectors: LBA48 NCQ (depth 31/32)
ata7.02: configured for UDMA/100
ata7.03: ATA-7, max UDMA/133, 976773168 sectors: LBA48 NCQ (depth 31/32)
ata7.03: configured for UDMA/100
ata7.04: ATA-7, max UDMA/133, 976773168 sectors: LBA48 NCQ (depth 31/32)
ata7.04: configured for UDMA/100
ata7: EH complete
scsi7 : sata_sil24
ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata8.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 5 ports, feat 0x9/0x9
ata8.00: hard resetting port
ata8.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata8.01: hard resetting port
ata8.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata8.02: hard resetting port
ata8.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata8.03: hard resetting port
ata8.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata8.04: hard resetting port
ata8.04: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata8.00: ATA-6, max UDMA/100, 625142448 sectors: LBA48
ata8.00: ata8: dev 0 multi count 16
ata8.00: configured for UDMA/100
ata8.01: ATA-6, max UDMA/100, 625142448 sectors: LBA48
ata8.01: ata8: dev 0 multi count 0
ata8.01: configured for UDMA/100
ata8.02: ATA-6, max UDMA/100, 625142448 sectors: LBA48
ata8.02: ata8: dev 0 multi count 0
Losing some ticks... checking if CPU frequency changed.
ata8.02: configured for UDMA/100
ata8.03: ATA-6, max UDMA/100, 625142448 sectors: LBA48
ata8.03: ata8: dev 0 multi count 0
ata8.03: configured for UDMA/100
ata8.04: ATA-6, max UDMA/100, 625142448 sectors: LBA48
ata8.04: ata8: dev 0 multi count 0
ata8.04: configured for UDMA/100
ata8: EH complete
Vendor: ATA Model: ST3500630AS Rev: 3.AA
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1
sd 6:0:0:0: Attached scsi disk sda
Vendor: ATA Model: ST3500630AS Rev: 3.AA
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
sdb: sdb1
sd 6:0:2:0: Attached scsi disk sdb
Vendor: ATA Model: ST3500630AS Rev: 3.AA
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdc: 976773168 512-byte hdwr sectors (500108 MB)
sdc: Write Protect is off
sdc: Mode Sense: 00 3a 00 00
SCSI device sdc: drive cache: write back
SCSI device sdc: 976773168 512-byte hdwr sectors (500108 MB)
sdc: Write Protect is off
sdc: Mode Sense: 00 3a 00 00
SCSI device sdc: drive cache: write back
sdc: sdc1
sd 6:0:3:0: Attached scsi disk sdc
Vendor: ATA Model: ST3500630AS Rev: 3.AA
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdd: 976773168 512-byte hdwr sectors (500108 MB)
sdd: Write Protect is off
sdd: Mode Sense: 00 3a 00 00
SCSI device sdd: drive cache: write back
SCSI device sdd: 976773168 512-byte hdwr sectors (500108 MB)
sdd: Write Protect is off
sdd: Mode Sense: 00 3a 00 00
SCSI device sdd: drive cache: write back
sdd: sdd1
sd 6:0:4:0: Attached scsi disk sdd
Vendor: ATA Model: WDC WD3200JD-00K Rev: 08.0
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sde: 625142448 512-byte hdwr sectors (320073 MB)
sde: Write Protect is off
sde: Mode Sense: 00 3a 00 00
SCSI device sde: drive cache: write back
SCSI device sde: 625142448 512-byte hdwr sectors (320073 MB)
sde: Write Protect is off
sde: Mode Sense: 00 3a 00 00
SCSI device sde: drive cache: write back
sde: sde1
sd 7:0:0:0: Attached scsi disk sde
Vendor: ATA Model: WDC WD3200JD-00K Rev: 08.0
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdf: 625142448 512-byte hdwr sectors (320073 MB)
sdf: Write Protect is off
sdf: Mode Sense: 00 3a 00 00
SCSI device sdf: drive cache: write back
SCSI device sdf: 625142448 512-byte hdwr sectors (320073 MB)
sdf: Write Protect is off
sdf: Mode Sense: 00 3a 00 00
SCSI device sdf: drive cache: write back
sdf: sdf1
sd 7:0:1:0: Attached scsi disk sdf
Vendor: ATA Model: WDC WD3200JD-00K Rev: 08.0
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdg: 625142448 512-byte hdwr sectors (320073 MB)
sdg: Write Protect is off
sdg: Mode Sense: 00 3a 00 00
SCSI device sdg: drive cache: write back
SCSI device sdg: 625142448 512-byte hdwr sectors (320073 MB)
sdg: Write Protect is off
sdg: Mode Sense: 00 3a 00 00
SCSI device sdg: drive cache: write back
sdg: sdg1
sd 7:0:2:0: Attached scsi disk sdg
Vendor: ATA Model: WDC WD3200JD-00K Rev: 08.0
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdh: 625142448 512-byte hdwr sectors (320073 MB)
sdh: Write Protect is off
sdh: Mode Sense: 00 3a 00 00
SCSI device sdh: drive cache: write back
SCSI device sdh: 625142448 512-byte hdwr sectors (320073 MB)
sdh: Write Protect is off
sdh: Mode Sense: 00 3a 00 00
SCSI device sdh: drive cache: write back
sdh: sdh1
sd 7:0:3:0: Attached scsi disk sdh
Vendor: ATA Model: WDC WD3200JD-00K Rev: 08.0
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdi: 625142448 512-byte hdwr sectors (320073 MB)
sdi: Write Protect is off
sdi: Mode Sense: 00 3a 00 00
SCSI device sdi: drive cache: write back
SCSI device sdi: 625142448 512-byte hdwr sectors (320073 MB)
sdi: Write Protect is off
sdi: Mode Sense: 00 3a 00 00
SCSI device sdi: drive cache: write back
sdi: sdi1
sd 7:0:4:0: Attached scsi disk sdi
sd 6:0:0:0: Attached scsi generic sg0 type 0
sd 6:0:2:0: Attached scsi generic sg1 type 0
sd 6:0:3:0: Attached scsi generic sg2 type 0
sd 6:0:4:0: Attached scsi generic sg3 type 0
sd 7:0:0:0: Attached scsi generic sg4 type 0
sd 7:0:1:0: Attached scsi generic sg5 type 0
sd 7:0:2:0: Attached scsi generic sg6 type 0
sd 7:0:3:0: Attached scsi generic sg7 type 0
sd 7:0:4:0: Attached scsi generic sg8 type 0
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
md: md0 stopped.
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0001291000050aae]
md: bind<sdh1>
md: bind<sde1>
md: bind<sdf1>
md: bind<sdi1>
md: bind<sdg1>
raid5: automatically using best checksumming function: generic_sse
generic_sse: 6358.000 MB/sec
raid5: using function: generic_sse (6358.000 MB/sec)
raid6: int64x1 1825 MB/s
raid6: int64x2 2335 MB/s
raid6: int64x4 2318 MB/s
raid6: int64x8 1593 MB/s
raid6: sse2x1 2059 MB/s
raid6: sse2x2 2888 MB/s
raid6: sse2x4 3332 MB/s
raid6: using algorithm sse2x4 (3332 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
raid5: device sdg1 operational as raid disk 0
raid5: device sdi1 operational as raid disk 4
raid5: device sdf1 operational as raid disk 3
raid5: device sde1 operational as raid disk 2
raid5: device sdh1 operational as raid disk 1
raid5: allocated 5312kB for md0
raid5: raid level 5 set md0 active with 5 out of 5 devices, algorithm 2
RAID5 conf printout:
--- rd:5 wd:5 fd:0
disk 0, o:1, dev:sdg1
disk 1, o:1, dev:sdh1
disk 2, o:1, dev:sde1
disk 3, o:1, dev:sdf1
disk 4, o:1, dev:sdi1
loop: loaded (max 8 devices)
device-mapper: table: 253:0: mirror: Device lookup failure
device-mapper: ioctl: error adding target to table
device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
device-mapper: ioctl: error adding target to table
device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
device-mapper: ioctl: error adding target to table
device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
device-mapper: ioctl: error adding target to table
device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
device-mapper: ioctl: error adding target to table
device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
device-mapper: ioctl: error adding target to table
device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
device-mapper: ioctl: error adding target to table
md: bind<dm-0>
md: bind<dm-2>
md: bind<dm-3>
raid5: device dm-3 operational as raid disk 3
raid5: device dm-2 operational as raid disk 2
raid5: device dm-0 operational as raid disk 0
raid5: allocated 4262kB for md1
raid5: raid level 5 set md1 active with 3 out of 4 devices, algorithm 0
RAID5 conf printout:
--- rd:4 wd:3 fd:1
disk 0, o:1, dev:dm-0
disk 2, o:1, dev:dm-2
disk 3, o:1, dev:dm-3
--
Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.