http://bugzilla.suse.com/show_bug.cgi?id=926053 Thomas Blume <thomas.blume@suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Flags|needinfo?(thomas.blume@suse |needinfo?(conde.philippe@sk |.com) |ynet.be) --- Comment #21 from Thomas Blume <thomas.blume@suse.com> --- (In reply to Robert Milasan from comment #20)

OK, so, from the results this is not udev nor scsi_id, but possibly kernel or hardware (not really sure).

Thomas, please check it yourself too and think of adding Hannes to the bug.

Hm, the attachments show: -->-- standard INQUIRY: PQual=0 Device_type=0 RMB=0 LU_CONG=0 version=0x05 [SPC-3] [AERC=0] [TrmTsk=0] NormACA=0 HiSUP=1 Resp_data_format=2 SCCS=0 ACC=0 TPGS=0 3PC=0 Protect=0 [BQue=0] EncServ=0 MultiP=0 [MChngr=0] [ACKREQQ=0] Addr16=0 [RelAdr=0] WBus16=0 Sync=0 [Linked=0] [TranDis=0] CmdQue=1 length=56 (0x38) Peripheral device type: disk Vendor identification: HP Product identification: LOGICAL VOLUME Product revision level: 4.68 Unit serial number: 0014380280B60D0 --<-- Seems the standard inquiry gets codepage 0x80, e.g.: # sg_inq -p 0x80 /dev/sdde VPD INQUIRY: Unit serial number page [...] According to the scsi_id code: /* * Get page 0, the page of the pages. By default, try from best to * worst of supported pages: 0x83 then 0x80. */ this should only be done if no better codepage is available. Philippe, can you please attach the output of: /lib/udev/scsi_id --export --whitelisted -p 0x80 -d /dev/sda /lib/udev/scsi_id --export --whitelisted -p 0x83 -d /dev/sda /lib/udev/scsi_id --export --whitelisted -p pre-spc3-83 -d /dev/sda -- You are receiving this mail because: You are on the CC list for the bug.