[Bug 240865] New: Wlan devicenumber eth 0 increasing by 1 - currently I have an eth33
https://bugzilla.novell.com/show_bug.cgi?id=240865 Summary: Wlan devicenumber eth 0 increasing by 1 - currently I have an eth33 Product: openSUSE 10.2 Version: Final Platform: 32bit OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Mobile Devices AssignedTo: behlert@novell.com ReportedBy: e.auler@gmx.de QAContact: qa@suse.de HI The problem: With every boot the devicenumber of the wlan-device (typ. eth1) is increasing by 1 - currently I have an eth44. There is no problem with normal work, but I don't think it is intended to do so. And what will happen if eth255 is reached? The question: Is there a possibility to stop the devicenumber from counting? If not, can someone tell me, if there will be a problem when eth255 is reached? The problem occured since I switched from SuSE 10.0 to open SuSE 10.2. I send you boot.msg and wlanconfig, I highlighted with >>>>>>>> Thanks in advance for your answer Eike e.auler@gmx.de WLANCONFIG: BOOTPROTO='static' BROADCAST='' ETHTOOL_OPTIONS='' IFPLUGD_PRIORITY='10' IPADDR='192.168.0.50' MTU='' NAME='Z-Com XG-600 and clones Wireless Adapter' NETMASK='255.255.255.0' NETWORK='' REMOTE_IPADDR='' STARTMODE='ifplugd' UNIQUE='KwIh.Z7e7L9Q6ex5' USERCONTROL='yes' WIRELESS_AP='' WIRELESS_AUTH_MODE='sharedkey' WIRELESS_BITRATE='auto' WIRELESS_CA_CERT='' WIRELESS_CHANNEL='' WIRELESS_CLIENT_CERT='' WIRELESS_CLIENT_KEY='' WIRELESS_CLIENT_KEY_PASSWORD='' WIRELESS_DEFAULT_KEY='0' WIRELESS_EAP_AUTH='' WIRELESS_EAP_MODE='' WIRELESS_ESSID='wertzu' WIRELESS_FREQUENCY='' WIRELESS_KEY='' WIRELESS_KEY_0='s:xyzxyzxyzxyz' WIRELESS_KEY_1='' WIRELESS_KEY_2='' WIRELESS_KEY_3='' WIRELESS_KEY_LENGTH='128' WIRELESS_MODE='Managed' WIRELESS_NICK='' WIRELESS_NWID='' WIRELESS_PEAP_VERSION='' WIRELESS_POWER='yes' WIRELESS_WPA_ANONID='' WIRELESS_WPA_IDENTITY='' WIRELESS_WPA_PASSWORD='' WIRELESS_WPA_PSK='' _nm_name='bus-pci-0000:03:06.0' boot.msg: Inspecting /boot/System.map-2.6.18.2-34-default Loaded 23374 symbols from /boot/System.map-2.6.18.2-34-default. Symbols match kernel version 2.6.18. No module symbols loaded - kernel modules not enabled. klogd 1.4.1, log source = ksyslog started. <5>Linux version 2.6.18.2-34-default (geeko@buildhost) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #1 SMP Mon Nov 27 11:46:27 UTC 2006 <6>BIOS-provided physical RAM map: <4> BIOS-e820: 0000000000000000 - 000000000009f800 (usable) <4> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) <4> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) <4> BIOS-e820: 0000000000100000 - 000000001ff70000 (usable) <4> BIOS-e820: 000000001ff70000 - 000000001ff79000 (ACPI data) <4> BIOS-e820: 000000001ff79000 - 000000001ff80000 (ACPI NVS) <4> BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved) <4> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) <4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) <4> BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) <4> BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved) <5>0MB HIGHMEM available. <5>511MB LOWMEM available. <6>found SMP MP-table at 000f69f0 <7>On node 0 totalpages: 130928 <7> DMA zone: 4096 pages, LIFO batch:0 <7> Normal zone: 126832 pages, LIFO batch:31 <6>DMI present. <6>Using APIC driver default <6>IO/L-APIC allowed because system is MP or new enough <7>ACPI: RSDP (v000 PTLTD ) @ 0x000f6a10 <7>ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x1ff741e7 <7>ACPI: FADT (v001 INTEL SPDG 0x06040000 PTL 0x00000003) @ 0x1ff78f14 <7>ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x1ff78f88 <7>ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x1ff78fd8 <7>ACPI: DSDT (v001 WIST K2P 0x06040000 MSFT 0x0100000e) @ 0x00000000 <6>ACPI: PM-Timer IO Port: 0x1008 <7>ACPI: Local APIC address 0xfee00000 <6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) <4>Processor #0 15:2 APIC version 20 <6>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) <6>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) <4>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <7>ACPI: IRQ9 used by override. <4>Enabling APIC mode: Flat. Using 1 I/O APICs <6>Using ACPI (MADT) for SMP configuration information <4>Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000) <4>Detected 2793.350 MHz processor. <4>Built 1 zonelists. Total pages: 130928 <5>Kernel command line: root=/dev/hda8 vga=0x317 resume=/dev/hda7 splash=silent <6>bootsplash: silent mode. <7>mapped APIC to ffffd000 (fee00000) <7>mapped IOAPIC to ffffc000 (fec00000) <6>Enabling fast FPU save and restore... done. <6>Enabling unmasked SIMD FPU exception support... done. <6>Initializing CPU#0 <4>PID hash table entries: 2048 (order: 11, 8192 bytes) <4>Console: colour dummy device 80x25 <4>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) <4>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) <6>Memory: 512552k/523712k available (1697k kernel code, 10636k reserved, 968k data, 196k init, 0k highmem) <4>Checking if this processor honours the WP bit even in supervisor mode... Ok. <4>Calibrating delay using timer specific routine.. 5590.89 BogoMIPS (lpj=11181786) <6>Security Framework v1.0.0 initialized <4>Mount-cache hash table entries: 512 <7>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 <7>CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 <6>CPU: Trace cache: 12K uops, L1 D cache: 8K <6>CPU: L2 cache: 512K <6>CPU: Hyper-Threading is disabled <7>CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000 <6>Intel machine check architecture supported. <6>Intel machine check reporting enabled on CPU#0. <6>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available <6>CPU0: Thermal monitoring enabled <4>Compat vDSO mapped to ffffe000. <6>Checking 'hlt' instruction... OK. <6>SMP alternatives: switching to UP code <6>Freeing SMP alternatives: 16k freed <6>checking if image is initramfs... it is <6>Freeing initrd memory: 2810k freed <6>ACPI: Core revision 20060707 <4>CPU0: Intel Mobile Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09 <6>Total of 1 processors activated (5590.89 BogoMIPS). <4>ENABLING IO-APIC IRQs <6>..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 <6>Brought up 1 CPUs <4>migration_cost=0 <6>NET: Registered protocol family 16 <6>ACPI: bus type pci registered <6>PCI: PCI BIOS revision 2.10 entry at 0xfd822, last bus=3 <6>PCI: Using configuration type 1 <4>Setting up standard PCI resources <6>ACPI: Interpreter enabled <6>ACPI: Using IOAPIC for interrupt routing <6>ACPI: PCI Root Bridge [PCI0] (0000:00) <7>PCI: Probing PCI hardware (bus 00) <4>PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO <4>PCI quirk: region 1180-11bf claimed by ICH4 GPIO <6>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 <7>Boot video device is 0000:01:00.0 <6>PCI: Transparent bridge - 0000:00:1e.0 <4>PCI: Bus #04 (-#07) is hidden behind transparent bridge #03 (-#03) (try 'pci=assign-busses') <4>Please report the result to linux-kernel to fix this permanently <4>PCI: Bus #08 (-#0b) is hidden behind transparent bridge #03 (-#03) (try 'pci=assign-busses') <4>Please report the result to linux-kernel to fix this permanently <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] <4>ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11 14 15) <4>ACPI: PCI Interrupt Link [LNKB] (IRQs *10 11 14 15) <4>ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11 14 15) <4>ACPI: PCI Interrupt Link [LNKD] (IRQs *10 11 14 15) <4>ACPI: PCI Interrupt Link [LNKE] (IRQs 10 *11 14 15) <4>ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11 14 15) *0, disabled. <4>ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11 14 15) *0, disabled. <4>ACPI: PCI Interrupt Link [LNKH] (IRQs *10 11 14 15) <6>ACPI: Embedded Controller [EC] (gpe 28) interrupt mode. <6>Linux Plug and Play Support v0.97 (c) Adam Belay <6>pnp: PnP ACPI init <6>pnp: PnP ACPI: found 11 devices <6>PnPBIOS: Disabled by ACPI PNP <6>PCI: Using ACPI for IRQ routing <6>PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report <6>PCI: Bridge: 0000:00:01.0 <6> IO window: disabled. <6> MEM window: d1000000-d1ffffff <6> PREFETCH window: e0000000-efffffff <4>PCI: Bus 4, cardbus bridge: 0000:03:04.0 <4> IO window: 00003400-000034ff <4> IO window: 00003800-000038ff <4> PREFETCH window: 30000000-31ffffff <4> MEM window: 36000000-37ffffff <4>PCI: Bus 8, cardbus bridge: 0000:03:04.1 <4> IO window: 00003c00-00003cff <4> IO window: 00002400-000024ff <4> PREFETCH window: 32000000-33ffffff <4> MEM window: 38000000-39ffffff <6>PCI: Bridge: 0000:00:1e.0 <6> IO window: 3000-3fff <6> MEM window: d2000000-d20fffff <6> PREFETCH window: 30000000-34ffffff <7>PCI: Setting latency timer of device 0000:00:1e.0 to 64 <6>ACPI: PCI Interrupt 0000:03:04.0[A] -> GSI 20 (level, low) -> IRQ 177 <6>ACPI: PCI Interrupt 0000:03:04.1[B] -> GSI 21 (level, low) -> IRQ 185 <6>NET: Registered protocol family 2 <4>IP route cache hash table entries: 4096 (order: 2, 16384 bytes) <4>TCP established hash table entries: 16384 (order: 5, 131072 bytes) <4>TCP bind hash table entries: 8192 (order: 4, 65536 bytes) <6>TCP: Hash tables configured (established 16384 bind 8192) <6>TCP reno registered <6>Simple Boot Flag at 0x36 set to 0x1 <6>Machine check exception polling timer started. <6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) <5>apm: overridden by ACPI. <6>audit: initializing netlink socket (disabled) <5>audit(1170272712.640:1): initialized <4>Total HugeTLB memory allocated, 0 <5>VFS: Disk quotas dquot_6.5.1 <4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) <6>Initializing Cryptographic API <6>io scheduler noop registered <6>io scheduler anticipatory registered <6>io scheduler deadline registered <6>io scheduler cfq registered (default) <6>vesafb: framebuffer at 0xe0000000, mapped to 0xe0880000, using 6144k, total 65536k <6>vesafb: mode is 1024x768x16, linelength=2048, pages=1 <6>vesafb: protected mode interface info at c000:f5f0 <6>vesafb: pmi: set display start = c00cf626, set palette = c00cf690 <6>vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da <6>vesafb: scrolling: redraw <6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 <6>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 81749 bytes,<6>...found (1024x768, 46202 bytes, v3). <4>Console: switching to colour frame buffer device 124x44 <6>fb0: VESA VGA frame buffer device <6>isapnp: Scanning for PnP cards... <6>isapnp: No Plug & Play device found <6>Real Time Clock Driver v1.12ac <6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled <6>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A <6>ACPI: PCI Interrupt 0000:00:1f.6[B] -> GSI 17 (level, low) -> IRQ 193 <6>ACPI: PCI interrupt for device 0000:00:1f.6 disabled <4>floppy0: no floppy controllers found <4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize <6>PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 <6>i8042.c: Detected active multiplexing controller, rev 1.1. <6>serio: i8042 AUX0 port at 0x60,0x64 irq 12 <6>serio: i8042 AUX1 port at 0x60,0x64 irq 12 <6>serio: i8042 AUX2 port at 0x60,0x64 irq 12 <6>serio: i8042 AUX3 port at 0x60,0x64 irq 12 <6>serio: i8042 KBD port at 0x60,0x64 irq 1 <6>mice: PS/2 mouse device common for all mice <6>input: PC Speaker as /class/input/input0 <6>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 <6>md: bitmap version 4.39 <6>NET: Registered protocol family 1 <4>Using IPI No-Shortcut mode <6>ACPI: (supports S0 S3 S4 S5) <6>Time: tsc clocksource has been installed. <6>Freeing unused kernel memory: 196k freed <6>input: AT Translated Set 2 keyboard as /class/input/input1 <6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <6>ACPI: CPU0 (power states: C1[C1] C2[C2]) <6>ACPI: Processor [CPU0] (supports 8 throttling states) <6>ACPI: Thermal Zone [THM0] (45 C) <6>ICH5: IDE controller at PCI slot 0000:00:1f.1 <4>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) <6>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 201 <6>ICH5: chipset revision 2 <6>ICH5: not 100% native mode: will probe irqs later <6> ide0: BM-DMA at 0x2060-0x2067, BIOS settings: hda:DMA, hdb:pio <6> ide1: BM-DMA at 0x2068-0x206f, BIOS settings: hdc:DMA, hdd:pio <7>Probing IDE interface ide0... <6>Time: acpi_pm clocksource has been installed. <4>hda: SAMSUNG HM080HC, ATA DISK drive <6>Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9248b1, caps: 0x904713/0x4000 <6>input: SynPS/2 Synaptics TouchPad as /class/input/input2 <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <6>hda: max request size: 512KiB <6>hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100) <6>hda: cache flushes supported <6> hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 > <7>Probing IDE interface ide1... <4>hdc: DVD+RW RW8160, ATAPI CD/DVD-ROM drive <4>ide1 at 0x170-0x177,0x376 on irq 15 <6>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found <4>Attempting manual resume <6>kjournald starting. Commit interval 5 seconds <6>EXT3 FS on hda8, internal journal <6>EXT3-fs: mounted filesystem with ordered data mode. <6>parport: PnPBIOS parport detected. <6>parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] <6>lp0: using parport0 (interrupt-driven). <6>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 193 <6>i8xx TCO timer: initialized (0x1060). heartbeat=30 sec (nowayout=0) <6>Linux agpgart interface v0.101 (c) Dave Jones <6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5 <6>usbcore: registered new driver usbfs <6>usbcore: registered new driver hub <3>intel_rng: FWH not detected <6>agpgart: Detected an Intel 865 Chipset. <6>agpgart: AGP aperture is 128M @ 0x40000000 <6>hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 8192kB Cache, UDMA(33) <6>Uniform CD-ROM driver Revision: 3.20 <6>ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 193 <7>PCI: Setting latency timer of device 0000:00:1f.5 to 64 <6>USB Universal Host Controller Interface driver v3.0 <6>NET: Registered protocol family 23 <6>nsc-ircc, chip->init <6>nsc-ircc, Found chip at base=0x02e <6>nsc-ircc, driver loaded (Dag Brattli) <4>nsc_ircc_open(), can't get iobase of 0x2f8 <6>nsc-ircc, Found chip at base=0x02e <6>nsc-ircc, driver loaded (Dag Brattli) <4>nsc_ircc_open(), can't get iobase of 0x2f8 <6>pnp: Device 00:09 disabled. <6>intel8x0_measure_ac97_clock: measured 55391 usecs <6>intel8x0: clocking to 48000 <6>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 <6>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 209 <7>PCI: Setting latency timer of device 0000:00:1d.0 to 64 <6>uhci_hcd 0000:00:1d.0: UHCI Host Controller <6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 <6>uhci_hcd 0000:00:1d.0: irq 209, io base 0x00001cc0 <6>usb usb1: new device found, idVendor=0000, idProduct=0000 <6>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb1: Product: UHCI Host Controller <6>usb usb1: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd <6>usb usb1: SerialNumber: 0000:00:1d.0 <6>usb usb1: configuration #1 chosen from 1 choice <6>hub 1-0:1.0: USB hub found <6>hub 1-0:1.0: 2 ports detected <6>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 217 <7>PCI: Setting latency timer of device 0000:00:1d.1 to 64 <6>uhci_hcd 0000:00:1d.1: UHCI Host Controller <6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 <6>uhci_hcd 0000:00:1d.1: irq 217, io base 0x00001ce0 <6>usb usb2: new device found, idVendor=0000, idProduct=0000 <6>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb2: Product: UHCI Host Controller <6>usb usb2: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd <6>usb usb2: SerialNumber: 0000:00:1d.1 <6>usb usb2: configuration #1 chosen from 1 choice <6>hub 2-0:1.0: USB hub found <6>hub 2-0:1.0: 2 ports detected <6>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 201 <7>PCI: Setting latency timer of device 0000:00:1d.2 to 64 <6>uhci_hcd 0000:00:1d.2: UHCI Host Controller <6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 <6>uhci_hcd 0000:00:1d.2: irq 201, io base 0x00002000 <6>usb usb3: new device found, idVendor=0000, idProduct=0000 <6>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb3: Product: UHCI Host Controller <6>usb usb3: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd <6>usb usb3: SerialNumber: 0000:00:1d.2 <6>usb usb3: configuration #1 chosen from 1 choice <6>hub 3-0:1.0: USB hub found <6>hub 3-0:1.0: 2 ports detected <6>8139too Fast Ethernet driver 0.9.27 <6>ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 209 <7>PCI: Setting latency timer of device 0000:00:1d.3 to 64 <6>uhci_hcd 0000:00:1d.3: UHCI Host Controller <6>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 <6>uhci_hcd 0000:00:1d.3: irq 209, io base 0x00002020 <6>usb usb4: new device found, idVendor=0000, idProduct=0000 <6>usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb4: Product: UHCI Host Controller <6>usb usb4: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd <6>usb usb4: SerialNumber: 0000:00:1d.3 <6>usb usb4: configuration #1 chosen from 1 choice <6>hub 4-0:1.0: USB hub found <6>hub 4-0:1.0: 2 ports detected <6>usb 2-2: new full speed USB device using uhci_hcd and address 2 <6>Loaded prism54 driver, version 1.2 <6>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 225 <7>PCI: Setting latency timer of device 0000:00:1d.7 to 64 <6>ehci_hcd 0000:00:1d.7: EHCI Host Controller <6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 <6>ehci_hcd 0000:00:1d.7: debug port 1 <7>PCI: cache line size of 128 is not supported by device 0000:00:1d.7 <6>ehci_hcd 0000:00:1d.7: irq 225, io mem 0xd0000000 <6>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 <6>usb usb5: new device found, idVendor=0000, idProduct=0000 <6>usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb5: Product: EHCI Host Controller <6>usb usb5: Manufacturer: Linux 2.6.18.2-34-default ehci_hcd <6>usb usb5: SerialNumber: 0000:00:1d.7 <6>usb usb5: configuration #1 chosen from 1 choice <6>hub 5-0:1.0: USB hub found <6>hub 5-0:1.0: 8 ports detected <4>nvidia: module license 'NVIDIA' taints kernel. <6>ACPI: PCI Interrupt 0000:03:06.0[A] -> GSI 18 (level, low) -> IRQ 201 <6>Yenta: CardBus bridge found at 0000:03:04.0 [17c0:17c0] <6>Yenta: Using CSCINT to route CSC interrupts to PCI <6>Yenta: Routing CardBus interrupts to PCI <6>Yenta TI: socket 0000:03:04.0, mfunc 0x010a1b22, devctl 0x64 <7>ieee1394: Initialized config rom entry `ip1394' <3>usb 2-2: device not accepting address 2, error -71 <6>Yenta: ISA IRQ mask 0x0c78, PCI irq 177 <6>Socket status: 30000006 <6>Yenta: Raising subordinate bus# of parent bus (#03) from #03 to #07 <6>pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff <6>cs: IO port probe 0x3000-0x3fff: clean. <6>pcmcia: parent PCI bridge Memory window: 0xd2000000 - 0xd20fffff <6>pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x34ffffff <6>Yenta: CardBus bridge found at 0000:03:04.1 [17c0:17c0] <6>Yenta: Using CSCINT to route CSC interrupts to PCI <6>Yenta: Routing CardBus interrupts to PCI <6>Yenta TI: socket 0000:03:04.1, mfunc 0x010a1b22, devctl 0x64
>><7>eth0: resetting device..>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>. <7>eth0: uploading firmware..>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>. <7>eth0: firmware version: 1.0.4.3 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >><7>eth0: firmware upload complete >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> <6>Yenta: ISA IRQ mask 0x0c78, PCI irq 185 <6>Socket status: 30000006 <6>Yenta: Raising subordinate bus# of parent bus (#03) from #07 to #0b <6>pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff <6>cs: IO port probe 0x3000-0x3fff: clean. <6>pcmcia: parent PCI bridge Memory window: 0xd2000000 - 0xd20fffff <6>pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x34ffffff <6>ACPI: PCI Interrupt 0000:03:05.0[A] -> GSI 19 (level, low) -> IRQ 217 >>>>><7>eth0: interface reset complete>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>><6>eth1: RealTek RTL8139 at 0xe10fc800, 00:0a:e4:02:55:4e, IRQ 217>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>><7>eth1: Identified 8139 chip type 'RTL-8101'>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> <6>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 209 <4>NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-9629 Wed Nov 1 19:30:07 PST 2006 <6>ACPI: PCI Interrupt 0000:03:04.2[C] -> GSI 23 (level, low) -> IRQ 225 <6>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[225] MMIO=[d2007000-d20077ff] Max Packet=[2048] IR/IT contexts=[4/8] >>><7>eth0: islpci_close ()>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> <6>usb 2-2: new full speed USB device using uhci_hcd and address 4 <6>usb 2-2: new device found, idVendor=04a9, idProduct=1091 <6>usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=3 <6>usb 2-2: Product: iP1500 <6>usb 2-2: Manufacturer: Canon <6>usb 2-2: SerialNumber: 10CRT4 <6>usb 2-2: configuration #1 chosen from 1 choice <6>drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04A9 pid 0x1091 <6>usbcore: registered new driver usblp <6>drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver <6>cs: IO port probe 0x100-0x3af: clean. <6>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 <6>cs: IO port probe 0x820-0x8ff: clean. <6>cs: IO port probe 0xc00-0xcf7: clean. <6>cs: IO port probe 0xa00-0xaff: clean. <6>cs: IO port probe 0x100-0x3af: clean. <6>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 <6>cs: IO port probe 0x820-0x8ff: clean. <6>cs: IO port probe 0xc00-0xcf7: clean. <6>cs: IO port probe 0xa00-0xaff: clean. <7>ieee1394: Host added: ID:BUS[0-00:1023] GUID[000ae4033600087a] >>><6>eth0 renamed to eth41>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> <6>Adding 779112k swap on /dev/hda7. Priority:-1 extents:1 across:779112k <6>device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com <6>loop: loaded (max 8 devices) <6>kjournald starting. Commit interval 5 seconds <6>EXT3 FS on hda9, internal journal <6>EXT3-fs: mounted filesystem with ordered data mode. <6>NTFS driver 2.1.27 [Flags: R/W MODULE]. <6>NTFS volume version 3.1. <6>AppArmor: AppArmor initialized <5>audit(1170272744.036:2): AppArmor initialized <4> Kernel logging (ksyslog) stopped. Kernel log daemon terminating.
Boot logging started on /dev/tty1(/dev/console) at Wed Jan 31 19:45:16 2007 Trying manual resume from /dev/hda7 Creating device nodes with udev Loading ide-core Loading ide-disk Loading processor Loading thermal Loading piix Loading fan Loading edd Loading jbd Loading mbcache Loading ext3 Invoking userspace resume from /dev/hda7 resume: Could not stat configuration file resume: libgcrypt version: 1.2.3 resume: Could not read the image Invoking in-kernel resume from /dev/hda7 Waiting for device /dev/hda8 to appear: ok fsck 1.39 (29-May-2006) [/bin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/hda8 /dev/hda8: clean, 173523/2186880 files, 1150203/4371680 blocks fsck succeeded. Mounting root device read-write. Mounting root /dev/hda8 Boot logging started on /dev/tty1(/dev/console (deleted)) at Wed Jan 31 20:45:22 2007 <notice>boot.udev start Starting udevd done <notice>'boot.udev start' exits with status 0 <notice>boot.rootfsck start Activating swap-devices in /etc/fstab... done<notice>'boot.rootfsck start' exits with status 0 <notice>boot.loadmodules start Loading required kernel modules done<notice>'boot.loadmodules start' exits with status 0 <notice>boot.preload_early start done <notice>'boot.preload_early start' exits with status 0 <notice>boot.scpm start <notice>'boot.scpm start' exits with status 0 <notice>boot.device-mapper start Activating device mapper... done <notice>'boot.device-mapper start' exits with status 0 <notice>boot.md start Starting MD Raid done <notice>'boot.md start' exits with status 0 <notice>boot.lvm start Waiting for udev to settle... Scanning for LVM volume groups... Reading all physical volumes. This may take a while... No volume groups found No volume groups found Activating LVM volume groups... No volume groups found done <notice>'boot.lvm start' exits with status 0 <notice>boot.localfs start Checking file systems... fsck 1.39 (29-May-2006) /dev/hda9: clean, 4117/3260416 files, 453988/6520374 blocks donedone Mounting local file systems... proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) debugfs on /sys/kernel/debug type debugfs (rw) udev on /dev type tmpfs (rw) devpts on /dev/pts type devpts (rw,mode=0620,gid=5) /dev/hda9 on /home type ext3 (rw) /dev/hda1 on /windows/C type vfat (rw,noexec,nosuid,nodev,gid=100,umask=0002,utf8=true) /dev/hda5 on /windows/D type ntfs (ro,noexec,nosuid,nodev,gid=100,umask=0002,nls=utf8) /dev/hda6 on /windows/E type vfat (rw,noexec,nosuid,nodev,gid=100,umask=0002,utf8=true) done<notice>'boot.localfs start' exits with status 0 <notice>boot.apparmor start Loading AppArmor module done Mounting securityfs on /sys/kernel/security done Loading AppArmor profiles done <notice>'boot.apparmor start' exits with status 0 <notice>boot.cleanup start <notice>'boot.cleanup start' exits with status 0 <notice>boot.clock start Setting up the hardware clockdone <notice>'boot.clock start' exits with status 0 <notice>boot.klog start Creating /var/log/boot.msg done<notice>killproc: kill(849,29) <notice>'boot.klog start' exits with status 0 <notice>boot.proc start <notice>'boot.proc start' exits with status 0 <notice>boot.sysctl start Setting current sysctl status from /etc/sysctl.conf net.ipv4.icmp_echo_ignore_broadcasts = 1 net.ipv4.conf.all.rp_filter = 1 done <notice>'boot.sysctl start' exits with status 0 <notice>boot.udev_retry start <notice>'boot.udev_retry start' exits with status 0 <notice>boot.videobios start <notice>'boot.videobios start' exits with status 0 <notice>boot.crypto start <notice>'boot.crypto start' exits with status 0 <notice>boot.ipconfig start Enabling syn flood protectiondone Disabling IP forwardingdone done <notice>'boot.ipconfig start' exits with status 0 <notice>boot.localnet start Setting up hostname 'lappineu'done Setting up loopback interface lo lo IP address: 127.0.0.1/8 done <notice>'boot.localnet start' exits with status 0 <notice>boot.preload start done <notice>'boot.preload start' exits with status 0 <notice>boot.swap start Activating remaining swap-devices in /etc/fstab... done<notice>'boot.swap start' exits with status 0 <notice>boot.ldconfig start <notice>'boot.ldconfig start' exits with status 0 System Boot Control: The system has been set up System Boot Control: Running /etc/init.d/boot.local done<notice>killproc: kill(849,3) INIT: Boot logging started on /dev/tty1(/dev/console) at Wed Jan 31 19:45:54 2007 Master Resource Control: previous runlevel: N, switching to runlevel: 5 Entering runlevel: 5 <notice>startproc: execve (/sbin/acpid) [ /sbin/acpidLoading AppArmor profiles - AppArmor already loaded with profiles.skipped ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda8 _=/sbin/startproc DAEMON=/sbin/acpid ] done [acpid]: starting up acpid: loading ACPI modules ( ac battery button ) done acpid: will not skip unsupported modules acpid: loading ACPI laptop modules ( ) done Starting acpid done <notice>startproc: execve (/usr/bin/dbus-daemon) [ /usr/bin/dbus-daemon --system ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda8 _=/sbin/startproc DAEMON=/usr/bin/dbus-daemon ] [acpid]: 1 rule loaded <notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PWD=/ PREVLEVEL=N LINES=44 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/hda8 _=/sbin/startproc DAEMON=/sbin/syslog-ng ] <notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PWD=/ PREVLEVEL=N LINES=44 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/hda8 _=/sbin/startproc DAEMON=/sbin/klogd ] Starting syslog servicesdone Initializing random number generatordone <notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda8 _=/sbin/startproc DAEMON=/sbin/resmgrd ] Starting D-Bus daemondone Starting irqbalance unused Starting resource managerdone <notice>startproc: execve (/usr/sbin/polkitd) [ /usr/sbin/polkitd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda8 _=/sbin/startproc DAEMON=/usr/sbin/polkitd ] Starting PolicyKit daemondone <notice>startproc: execve (/usr/sbin/hald) [ /usr/sbin/hald --daemon=yes ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda8 _=/sbin/startproc DAEMON=/usr/sbin/hald ] Starting HAL daemondone Loading CPUFreq modulesLoading keymap i386/qwertz/de-latin1-nodeadkeys.map.gz doneLoading compose table latin1.adddone Start Unicode mode doneLoading console font lat9w-16.psfu -m trivial G0:loadable done (CPUFreq not supported) Setting up network interfaces: lo lo IP address: 127.0.0.1/8 done eth1 device: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) eth1 configuration: eth-bus-pci-0000:03:05.0 eth1 is controlled by ifplugd waiting
eth41 device: Intersil Corporation ISL3890 [Prism GT/Prism Duette]/ISL3886 [Prism Javelin/Prism Xbow] (rev 01) eth41 configuration: wlan-id-00:60:b3:97:7f:27 eth41 is controlled by ifplugd <notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PWD=/ LANG=de_DE.UTF-8 PREVLEVEL=N LINES=44 QT_SYSTEM_DIR=/usr/share/desktop-data SHLVL=2 HOME=/ XCURSOR_THEME=crystalwhite WINDOWMANAGER=/usr/bin/kde SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/hda8 _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ] done eth1 device: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) eth1 configuration: eth-bus-pci-0000:03:05.0 eth1 ifplugd is running eth1 no cable connected doneSetting up service network . . . . . . . . . . . . . . . done Starting service kdmdone <notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda8 _=/sbin/startproc DAEMON=/sbin/portmap ] Starting RPC portmap daemondone <notice>startproc: execve (/sbin/auditd) [ /sbin/auditd -n ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda8 _=/sbin/startproc DAEMON=/sbin/auditd ] Starting auditd done Starting nfsboot (sm-notify) done Mount SMB/ CIFS File Systems unused Importing Net File System (NFS)done <notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda8 _=/usr/bin/ionice DAEMON=/usr/sbin/cupsd ] Checking/updating CPU microcode done Starting cupsddone Starting hotkey-setup done <notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda8 _=/sbin/startproc DAEMON=/usr/sbin/nscd ] Starting Name Service Cache Daemondone Starting mail service (Postfix)done Starting ZENworks Management Daemondone <notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda8 _=/sbin/startproc DAEMON=/usr/sbin/cron ] Starting CRON daemondone <notice>startproc: execve (/usr/sbin/smpppd) [ /usr/sbin/smpppd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda8 _=/sbin/startproc DAEMON=/usr/sbin/smpppd ] <notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -f /var/run/acpid.socket -v 3 ], [ HOME=/ PATH=/bin:/sbin:/usr/bin:/usr/sbin SHELL=/bin/sh RUNLEVEL=5 PREVLEVEL=N DAEMON=/usr/sbin/powersaved ] <notice>startproc: execve (/usr/sbin/rpc.mountd) [ /usr/sbin/rpc.mountd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda8 _=/sbin/startproc DAEMON=/usr/sbin/rpc.mountd ] Starting powersaved: done Starting SMPPPDdone <notice>checkproc: /opt/kde3/bin/kdm 3610 <notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda8 _=/sbin/startproc DAEMON=/usr/sbin/sshd ] Starting kernel based NFS serverexportfs: /etc/exports [1]: Neither 'subtree_check' or 'no_subtree_check' specified for export "*:/home/Ekie". Assuming default behaviour ('subtree_check'). NOTE: this default will change with nfs-utils version 1.1.0 done Starting SSH daemondone Master Resource Control: runlevel 5 has been reached Skipped services in runlevel 5: irq_balancer smbfs <notice>killproc: kill(2595,3)
-- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=240865 judas_iscariote@shorewall.net changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |RESOLVED Resolution| |DUPLICATE ------- Comment #1 from judas_iscariote@shorewall.net 2007-01-31 23:48 MST ------- *** This bug has been marked as a duplicate of bug 230213 *** -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
participants (1)
-
bugzilla_noreply＠novell.com