http://bugzilla.opensuse.org/show_bug.cgi?id=1208616 Bug ID: 1208616 Summary: Unable to boot on encrypted RAID 1 Btrfs install Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: x86-64 OS: openSUSE Tumbleweed Status: NEW Severity: Normal Priority: P5 - None Component: MicroOS Assignee: kubic-bugs@opensuse.org Reporter: hukelvin99@gmail.com QA Contact: qa-bugs@suse.de Found By: --- Blocker: --- Created attachment 865089 --> http://bugzilla.opensuse.org/attachment.cgi?id=865089&action=edit The looping errors outputted Hi all, as in the title, I've successfully installed but failed to boot on an encrypted Btrfs RAID 1 setup. I've also tested this on the KDE variant which yields the same outcome. Current hardware: - Gigabyte Aorus 5 KE4 laptop with two deviations - Two NVMe SSDs, a WD_BLACK SN770 1TB and a Samsung MZVL21T0HCLR-00B00 (OEM PM9A1) - 64GiB (2x 32GiB) DDR4. Steps I performed during setup: - On partitioning, went through the guided proposal with disk encryption enabled. - After that, performed an expert partitioning with the current proposal. - Created a new partition on second drive with max size, role set to raw volume, and drive encrypted. - Under the Btrfs tab in the sidebar, I added the aforementioned encrypted second drive to the one created as part of the guided setup via the used devices tab. - Under Security, enabled firewall and disabled SSH service Steps performed during boot: - Entered the password when prompted for both drives - Selected default boot under Grub. - Error loops for a period of time. Afterwards the system reboots. Additional note: - The following attached images were from a Qemu/KVM (Proxmox specifically) VM, but the same behaviour was observed on a bare metal install. -- You are receiving this mail because: You are on the CC list for the bug.