http://bugzilla.novell.com/show_bug.cgi?id=926053 --- Comment #5 from Philippe Condé <conde.philippe@skynet.be> --- Hello, this problem remains with kerenl 4.0.1.1 The device by-uuid seems correct. command blkid gives hpprol2:~ # blkid /dev/sda1: UUID="ab7656ab-41e6-41e8-aa16-bbb4ca3c643e" TYPE="swap" PARTUUID="000aab75-01" /dev/sda2: LABEL="OpenSuse" UUID="0d169d88-fe6d-4ca8-bebf-916cae9ec3d7" TYPE="ext4" PARTUUID="000aab75-02" /dev/sda3: LABEL="usr" UUID="0e2de715-8f0b-4206-842c-2a1f4c4e5669" TYPE="ext4" PARTUUID="000aab75-03" /dev/sda4: LABEL="home" UUID="dc7675a1-24a2-4ec2-a3a1-458af1b9d1e0" TYPE="ext4" PARTUUID="000aab75-04" /dev/sdb1: LABEL="srv" UUID="bf2e6374-cee0-4c18-96b5-851f821ac807" TYPE="ext4" PARTUUID="0005f844-01" /dev/sdb2: LABEL="var" UUID="b4849ee9-4a6c-4304-bc8d-cdca4f113408" TYPE="ext4" PARTUUID="0005f844-02" /dev/sdb3: LABEL="local" UUID="89036c77-2a68-4ad2-9dfd-f950288600fa" TYPE="ext4" PARTUUID="0005f844-03" /dev/sdb4: LABEL="opt" UUID="55cafd49-1996-4599-8af6-46fbaf61b5eb" TYPE="ext4" PARTUUID="0005f844-04" /dev/sdc1: LABEL="vmroot" UUID="f14d0615-94ce-4f37-b491-4cefc8b83ff0" TYPE="ext4" PARTUUID="0001a1e7-01" /dev/sdc2: LABEL="vmswap" UUID="e29476d3-e6a3-4083-ac21-12999fcb072c" TYPE="swap" PARTUUID="0001a1e7-02" /dev/sdc3: LABEL="vmuser" UUID="506b37dd-4412-4398-abd1-970f223592a1" TYPE="ext4" PARTUUID="0001a1e7-03" /dev/sdc4: LABEL="vmhome" UUID="0ddfdd63-b1a1-446b-8518-119273bdeff8" TYPE="ext4" PARTUUID="0001a1e7-04" and hpprol2:~ # lsblk -f NAME FSTYPE LABEL UUID MOUNTPOINT sda ├─sda1 swap ab7656ab-41e6-41e8-aa16-bbb4ca3c643e [SWAP] ├─sda2 ext4 OpenSuse 0d169d88-fe6d-4ca8-bebf-916cae9ec3d7 / ├─sda3 ext4 usr 0e2de715-8f0b-4206-842c-2a1f4c4e5669 /usr └─sda4 ext4 home dc7675a1-24a2-4ec2-a3a1-458af1b9d1e0 /home sdb ├─sdb1 ext4 srv bf2e6374-cee0-4c18-96b5-851f821ac807 /srv ├─sdb2 ext4 var b4849ee9-4a6c-4304-bc8d-cdca4f113408 /var ├─sdb3 ext4 local 89036c77-2a68-4ad2-9dfd-f950288600fa /local └─sdb4 ext4 opt 55cafd49-1996-4599-8af6-46fbaf61b5eb /opt sdc ├─sdc1 ext4 vmroot f14d0615-94ce-4f37-b491-4cefc8b83ff0 ├─sdc2 swap vmswap e29476d3-e6a3-4083-ac21-12999fcb072c ├─sdc3 ext4 vmuser 506b37dd-4412-4398-abd1-970f223592a1 └─sdc4 ext4 vmhome 0ddfdd63-b1a1-446b-8518-119273bdeff8 I think that the by-id generation uses some hardware information that is taken from the 4 disks that are in a raid 5 configuration and receive the same info for the 3 logical disks Is it possible changing the default use of by-id by by_uuid? In Yast ==> /etc/sysconfig ==> system==> Yast2 ==> storage ==> DEVICE_NAMES I changed the "id" in "label" but this doesn't change anything for the errors in journalctl. Do I need doing manually some rebuild? Regards Philippe -- You are receiving this mail because: You are on the CC list for the bug.