[Bug 577489] New: Dmesg reports error immediately after startup
http://bugzilla.novell.com/show_bug.cgi?id=577489 http://bugzilla.novell.com/show_bug.cgi?id=577489#c0 Summary: Dmesg reports error immediately after startup Classification: openSUSE Product: openSUSE 11.3 Version: Milestone 1 Platform: x86-64 OS/Version: openSUSE 11.3 Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening@forge.provo.novell.com ReportedBy: upscope@nwi.net QAContact: qa@suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (compatible; Konqueror/4.3; Linux) KHTML/4.3.4 (like Gecko) SUSE getting this error found in display message (Dmesg) right after booting 11.3 ms1. [ 12.211890] hald-probe-inpu[1539]: segfault at 2 ip 00007fb6b5b1f0d9 sp 00007fff609ca3c0 error 4 in libc-2.11.so[7fb6b5aa7000+151000] [ 12.221551] hald-probe-inpu[1540]: segfault at 2 ip 00007fe5a9c0f0d9 sp 00007ffff0bf2900 error 4 in libc-2.11.so[7fe5a9b97000+151000] [ 12.226451] hald-probe-inpu[1541]: segfault at 2 ip 00007fafa631c0d9 sp 00007fff47a54af0 error 4 in libc-2.11.so[7fafa62a4000+151000] [ 12.229858] hald-probe-inpu[1543]: segfault at 2 ip 00007f9447f610d9 sp 00007fff9b9f89d0 error 4 in libc-2.11.so[7f9447ee9000+151000] [ 12.230608] hald-probe-inpu[1544]: segfault at 2 ip 00007fbf0d9170d9 sp 00007fffce03fa80 error 4 in libc-2.11.so[7fbf0d89f000+151000] [ 12.231463] hald-probe-inpu[1545]: segfault at 2 ip 00007ffdb8e470d9 sp 00007fffde5fa000 error 4 in libc-2.11.so[7ffdb8dcf000+151000] Appears this package is provided by glibc. got following response on newsgroup from Knurpht: Looks like a bug, so yes. Am i stupid or should it say hald-probe-input instead of hald-probe-inpu The latest seems so irrational. Reproducible: Always Steps to Reproduce: 1. boot system 2. log in as user 3. start console and do dmesg command 4. Error towards end of log Actual Results: See details above. Should it be input or inpu. Expected Results: Not sure Intel dx48bt2 motherboard, Intel E7200 Core 2 duo 2.53 Mhz, 4GB DDR3, 2 320 GB SATA drives (sda is 11.2 install and sdb is 11.3), on board sound (Intel), and GeForce 8400GS graphics. usb hard drives (1TB My Book and 230 GB Ide) and two Lite-on DVD/cdrom drives. System comes up but there is some problem with user accessing the usb hard drives and dvds (root can access fine) This is seperate issue I think? Please contact me for anything else you need (not sure how to classify this?) -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=577489 http://bugzilla.novell.com/show_bug.cgi?id=577489#c yang xiaoyu <xyyang@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |xyyang@novell.com AssignedTo|bnc-team-screening@forge.pr |hvogel@novell.com |ovo.novell.com | -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=577489 http://bugzilla.novell.com/show_bug.cgi?id=577489#c1 Russ Fineman <upscope@nwi.net> changed: What |Removed |Added ---------------------------------------------------------------------------- Priority|P5 - None |P3 - Medium CC| |upscope@nwi.net --- Comment #1 from Russ Fineman <upscope@nwi.net> 2010-02-23 17:24:52 UTC --- Only real problem I see is with CD/DVD's Users cannot access them. Could this be related? -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=577489 http://bugzilla.novell.com/show_bug.cgi?id=577489#c3 Petr Uzel <puzel@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- AssignedTo|puzel@novell.com |dkukawka@novell.com Summary|Dmesg reports error |hald-probe-input crashes |immediately after startup |immediately --- Comment #3 from Petr Uzel <puzel@novell.com> 2010-05-12 13:40:33 UTC --- (In reply to comment #0)
getting this error found in display message (Dmesg) right after booting 11.3 ms1.
[ 12.211890] hald-probe-inpu[1539]: segfault at 2 ip 00007fb6b5b1f0d9 sp 00007fff609ca3c0 error 4 in libc-2.11.so[7fb6b5aa7000+151000] [...] Looks like a bug, so yes. Am i stupid or should it say
hald-probe-input instead of hald-probe-inpu
This is fine - kernel just uses only the first 15 characters. However, I can confirm that hald-probe-input crashes - as can be seen in dmesg output, or when invoking /usr/lib/hal/hald-probe-input (as root) manually. Assigning to hal maintainer.
System comes up but there is some problem with user accessing the usb hard drives and dvds (root can access fine) This is seperate issue I think?
I don't think it is related - please file separate bug report for this. Thanks. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=577489 http://bugzilla.novell.com/show_bug.cgi?id=577489#c4 Martin Christeson <martin@etainable.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |martin@etainable.com --- Comment #4 from Martin Christeson <martin@etainable.com> 2010-07-14 15:11:30 UTC --- Did zypper dup to 11.3 (repository) a day early. looking at dmesg The hald-probe-input crash is stlil a problem. from dmesg: [ 25.558993] hald-probe-inpu[1755]: segfault at 2 ip 00007f4675b00f79 sp 00007fff0c28d980 error 4 in libc-2.11.2.so[7f4675a89000+156000] [ 25.559802] hald-probe-inpu[1756]: segfault at 2 ip 00007f96ea0d4f79 sp 00007fff4c200880 error 4 in libc-2.11.2.so[7f96ea05d000+156000] package versions: glibc-2.11.2-2.4.x86_64 kernel-desktop-2.6.34-12.3.x86_64 -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=577489 http://bugzilla.novell.com/show_bug.cgi?id=577489#c5 Till Dörges <td@pre-secure.de> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |td@pre-secure.de --- Comment #5 from Till Dörges <td@pre-secure.de> 2010-08-01 11:02:41 UTC --- I can confirm the problem on the following system: $ uname -a Linux box 2.6.34-12-default #1 SMP 2010-06-29 02:39:08 +0200 x86_64 x86_64 x86_64 GNU/Linux $ cat /etc/SuSE-release openSUSE 11.3 (x86_64) VERSION = 11.3 The following packages are installed: $ rpm -qa | egrep '^(kernel|hal|glibc)' | sort glibc-2.11.2-3.1.1.x86_64 glibc-32bit-2.11.2-3.1.1.x86_64 glibc-debuginfo-2.11.2-3.1.1.x86_64 glibc-devel-2.11.2-3.1.1.x86_64 glibc-devel-32bit-2.11.2-3.1.1.x86_64 glibc-devel-debuginfo-2.11.2-3.1.1.x86_64 glibc-i18ndata-2.11.2-3.1.1.x86_64 glibc-locale-2.11.2-3.1.1.x86_64 glibc-locale-32bit-2.11.2-3.1.1.x86_64 hal-0.5.14-8.1.x86_64 hal-debuginfo-0.5.14-8.1.x86_64 hal-palm-0.12.3-5.3.x86_64 kernel-debug-devel-2.6.34-12.3.x86_64 kernel-default-2.6.34-12.3.x86_64 kernel-default-devel-2.6.34-12.3.x86_64 kernel-desktop-devel-2.6.34-12.3.x86_64 kernel-devel-2.6.34-12.3.noarch kernel-firmware-20100617-2.2.noarch kernel-source-2.6.34-12.3.noarch kernel-syms-2.6.34-12.3.x86_64 kernel-xen-devel-2.6.34-12.3.x86_64 The backtrace looks like this: # /usr/lib/hal/hald-probe-input Segmentation fault (core dumped) # gdb GNU gdb (GDB) SUSE (7.1-3.12) Copyright (C) 2010 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "x86_64-suse-linux". For bug reporting instructions, please see: <http://www.gnu.org/software/gdb/bugs/>. (gdb) core core warning: core file may not match specified executable file. Reading symbols from /usr/lib/hal/hald-probe-input...Reading symbols from /usr/lib/debug/usr/lib/hal/hald-probe-input.debug...done. done. [New Thread 7915] Missing separate debuginfo for Try: zypper install -C "debuginfo(build-id)=ca74d9116ad804a6411ec3b2c6cca6ff08b15a14" Reading symbols from /usr/lib64/libhal.so.1.0.0...Reading symbols from /usr/lib/debug/usr/lib64/libhal.so.1.0.0.debug...done. done. Loaded symbols for /usr/lib64/libhal.so.1.0.0 Reading symbols from /lib64/libdbus-1.so.3.4.0...Reading symbols from /usr/lib/debug/lib64/libdbus-1.so.3.4.0.debug...done. done. Loaded symbols for /lib64/libdbus-1.so.3.4.0 Reading symbols from /lib64/libpthread-2.11.2.so...Reading symbols from /usr/lib/debug/lib64/libpthread-2.11.2.so.debug...done. done. Loaded symbols for /lib64/libpthread-2.11.2.so Reading symbols from /lib64/libc-2.11.2.so...Reading symbols from /usr/lib/debug/lib64/libc-2.11.2.so.debug...done. done. Loaded symbols for /lib64/libc-2.11.2.so Reading symbols from /lib64/librt-2.11.2.so...Reading symbols from /usr/lib/debug/lib64/librt-2.11.2.so.debug...done. done. Loaded symbols for /lib64/librt-2.11.2.so Reading symbols from /lib64/ld-2.11.2.so...Reading symbols from /usr/lib/debug/lib64/ld-2.11.2.so.debug...done. done. Loaded symbols for /lib64/ld-2.11.2.so Core was generated by `/usr/lib/hal/hald-probe-input'. Program terminated with signal 11, Segmentation fault. #0 __libc_free (mem=0xa) at malloc.c:3710 3710 malloc.c: No such file or directory. in malloc.c (gdb) -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=577489 http://bugzilla.novell.com/show_bug.cgi?id=577489#c6 --- Comment #6 from Till Dörges <td@pre-secure.de> 2010-08-01 11:10:22 UTC --- For the sake of completeness I just checked on a 32 bit box, too: $ uname -a Linux box32 2.6.34-12-default #1 SMP 2010-06-29 02:39:08 +0200 i686 i686 i386 GNU/Linux $ cat /etc/SuSE-release openSUSE 11.3 (i586) VERSION = 11.3 $ rpm -qa | egrep '^(kernel|hal|glibc)' | sort glibc-2.11.2-3.1.1.i686 glibc-debuginfo-2.11.2-3.1.1.i686 glibc-devel-2.11.2-3.1.1.i686 glibc-locale-2.11.2-3.1.1.i586 hal-0.5.14-8.1.i586 hal-debuginfo-0.5.14-8.1.i586 kernel-default-2.6.34-12.3.i586 kernel-firmware-20100617-2.2.noarch Calling hald-probe-input gives: # /usr/lib/hal/hald-probe-input *** glibc detected *** /usr/lib/hal/hald-probe-input: munmap_chunk(): invalid pointer: 0x08049371 *** ======= Backtrace: ========= /lib/libc.so.6(+0x6dffb)[0xb75ddffb] /lib/libc.so.6(+0x6e7ce)[0xb75de7ce] /lib/libdbus-1.so.3(dbus_free+0x1f)[0xb772088f] /lib/libdbus-1.so.3(dbus_error_free+0x42)[0xb7707d02] /usr/lib/hal/hald-probe-input[0x8048d7b] /lib/libc.so.6(__libc_start_main+0xfe)[0xb7586c0e] /usr/lib/hal/hald-probe-input[0x8048a81] ======= Memory map: ======== 08048000-0804a000 r-xp 00000000 08:05 6652 /usr/lib/hal/hald-probe-input 0804a000-0804b000 r--p 00001000 08:05 6652 /usr/lib/hal/hald-probe-input 0804b000-0804c000 rw-p 00002000 08:05 6652 /usr/lib/hal/hald-probe-input 0804c000-0806d000 rw-p 00000000 00:00 0 [heap] b7546000-b7562000 r-xp 00000000 08:05 32831 /lib/libgcc_s.so.1 b7562000-b7563000 r--p 0001b000 08:05 32831 /lib/libgcc_s.so.1 b7563000-b7564000 rw-p 0001c000 08:05 32831 /lib/libgcc_s.so.1 b7564000-b7565000 rw-p 00000000 00:00 0 b7565000-b756d000 r-xp 00000000 08:05 77384 /lib/librt-2.11.2.so b756d000-b756e000 r--p 00007000 08:05 77384 /lib/librt-2.11.2.so b756e000-b756f000 rw-p 00008000 08:05 77384 /lib/librt-2.11.2.so b756f000-b7570000 rw-p 00000000 00:00 0 b7570000-b76d4000 r-xp 00000000 08:05 34513 /lib/libc-2.11.2.so b76d4000-b76d5000 ---p 00164000 08:05 34513 /lib/libc-2.11.2.so b76d5000-b76d7000 r--p 00164000 08:05 34513 /lib/libc-2.11.2.so b76d7000-b76d8000 rw-p 00166000 08:05 34513 /lib/libc-2.11.2.so b76d8000-b76db000 rw-p 00000000 00:00 0 b76db000-b76f2000 r-xp 00000000 08:05 34534 /lib/libpthread-2.11.2.so b76f2000-b76f3000 r--p 00016000 08:05 34534 /lib/libpthread-2.11.2.so b76f3000-b76f4000 rw-p 00017000 08:05 34534 /lib/libpthread-2.11.2.so b76f4000-b76f6000 rw-p 00000000 00:00 0 b76f6000-b773a000 r-xp 00000000 08:05 29340 /lib/libdbus-1.so.3.4.0 b773a000-b773b000 r--p 00043000 08:05 29340 /lib/libdbus-1.so.3.4.0 b773b000-b773c000 rw-p 00044000 08:05 29340 /lib/libdbus-1.so.3.4.0 b773c000-b774e000 r-xp 00000000 08:05 69376 /usr/lib/libhal.so.1.0.0 b774e000-b774f000 r--p 00011000 08:05 69376 /usr/lib/libhal.so.1.0.0 b774f000-b7750000 rw-p 00012000 08:05 69376 /usr/lib/libhal.so.1.0.0 b776d000-b776e000 rw-p 00000000 00:00 0 b776e000-b778d000 r-xp 00000000 08:05 818 /lib/ld-2.11.2.so b778d000-b778e000 r--p 0001e000 08:05 818 /lib/ld-2.11.2.so b778e000-b778f000 rw-p 0001f000 08:05 818 /lib/ld-2.11.2.so bfc7b000-bfc9c000 rw-p 00000000 00:00 0 [stack] ffffe000-fffff000 r-xp 00000000 00:00 0 [vdso] Aborted (core dumped) And looking at the core: # gdb GNU gdb (GDB) SUSE (7.1-3.12) Copyright (C) 2010 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "i586-suse-linux". For bug reporting instructions, please see: <http://www.gnu.org/software/gdb/bugs/>. (gdb) core core warning: core file may not match specified executable file. Reading symbols from /usr/lib/hal/hald-probe-input...Reading symbols from /usr/lib/debug/usr/lib/hal/hald-probe-input.debug...done. done. [New Thread 9434] Missing separate debuginfo for Try: zypper install -C "debuginfo(build-id)=99764509ec1e44651f3c5062473616963b6882ed" Reading symbols from /usr/lib/libhal.so.1.0.0...Reading symbols from /usr/lib/debug/usr/lib/libhal.so.1.0.0.debug...done. done. Loaded symbols for /usr/lib/libhal.so.1.0.0 Reading symbols from /lib/libdbus-1.so.3.4.0...Reading symbols from /usr/lib/debug/lib/libdbus-1.so.3.4.0.debug...done. done. Loaded symbols for /lib/libdbus-1.so.3.4.0 Reading symbols from /lib/libpthread-2.11.2.so...Reading symbols from /usr/lib/debug/lib/libpthread-2.11.2.so.debug...done. done. Loaded symbols for /lib/libpthread-2.11.2.so Reading symbols from /lib/libc-2.11.2.so...Reading symbols from /usr/lib/debug/lib/libc-2.11.2.so.debug...done. done. Loaded symbols for /lib/libc-2.11.2.so Reading symbols from /lib/librt-2.11.2.so...Reading symbols from /usr/lib/debug/lib/librt-2.11.2.so.debug...done. done. Loaded symbols for /lib/librt-2.11.2.so Reading symbols from /lib/ld-2.11.2.so...Reading symbols from /usr/lib/debug/lib/ld-2.11.2.so.debug...done. done. Loaded symbols for /lib/ld-2.11.2.so Reading symbols from /lib/libgcc_s.so.1...Reading symbols from /usr/lib/debug/lib/libgcc_s.so.1.debug...done. done. Loaded symbols for /lib/libgcc_s.so.1 Core was generated by `/usr/lib/hal/hald-probe-input'. Program terminated with signal 6, Aborted. #0 0xffffe430 in __kernel_vsyscall () (gdb) bt #0 0xffffe430 in __kernel_vsyscall () #1 0xb759b7ff in raise (sig=6) at ../nptl/sysdeps/unix/sysv/linux/raise.c:64 #2 0xb759d140 in abort () at abort.c:92 #3 0xb75d7fd7 in __libc_message (do_abort=2, fmt=0xb769df54 "*** glibc detected *** %s: %s: 0x%s ***\n") at ./sysdeps/unix/sysv/linux/libc_fatal.c:186 #4 0xb75ddffb in malloc_printerr (action=<value optimized out>, str=<value optimized out>, ptr=0x8049371) at malloc.c:6267 #5 0xb75de7ce in munmap_chunk (p=0x8049369) at malloc.c:3541 #6 0xb772088f in dbus_free (memory=0x8049371) at dbus-memory.c:644 #7 0xb7707d02 in dbus_error_free (error=0xbfc9aefc) at dbus-errors.c:217 #8 0x08048d7b in main (argc=1, argv=0xbfc9afc4) at probe-input.c:124 (gdb) This looks different at first sight. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=577489 http://bugzilla.novell.com/show_bug.cgi?id=577489#c7 --- Comment #7 from Till Dörges <td@pre-secure.de> 2010-08-01 11:16:31 UTC --- (In reply to comment #5)
The backtrace looks like this:
Sorry, forgot to actually post it: (gdb) bt #0 __libc_free (mem=0xa) at malloc.c:3710 #1 0x00007f9527044388 in dbus_error_free (error=0x7fffc9ba1af0) at dbus-errors.c:217 #2 0x00000000004010b0 in main (argc=<value optimized out>, argv=<value optimized out>) at probe-input.c:124 -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=577489 http://bugzilla.novell.com/show_bug.cgi?id=577489#c8 Jan Grosser <email@jan-grosser.de> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |email@jan-grosser.de --- Comment #8 from Jan Grosser <email@jan-grosser.de> 2010-08-02 20:43:20 UTC --- .. same on my Lenovo ThinkPad R400: uname -a Linux lenovo.zuhause 2.6.34-12-desktop #1 SMP PREEMPT 2010-06-29 02:39:08 +0200 x86_64 x86_64 x86_64 GNU/Linux This seems to be the reason that the boot time on my computer increases to around 225 seconds! Here is an extraction of my dmesg output with time stamps: [ 20.966364] Slow work thread pool: Starting up [ 20.966438] Slow work thread pool: Ready [ 20.966481] FS-Cache: Loaded [ 20.980971] FS-Cache: Netfs 'nfs' registered for caching [ 21.282171] hald-probe-inpu[1724]: segfault at 2 ip 00007f487d947f79 sp 00007fff060b69f0 error 4 in libc-2.11.2.so[7f487d8d0000+156000] [ 21.284650] hald-probe-inpu[1725]: segfault at 2 ip 00007fcd30368f79 sp 00007fff4c81a800 error 4 in libc-2.11.2.so[7fcd302f1000+156000] [ 201.710599] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found [ 202.144929] Bluetooth: L2CAP ver 2.14 [ 202.144932] Bluetooth: L2CAP socket layer initialized The version of HAL installed on my computer is 0.5.14-8.1. Any idea how to fix it? -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=577489 http://bugzilla.novell.com/show_bug.cgi?id=577489#c9 Petr Uzel <puzel@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO InfoProvider| |maintenance@opensuse.org AssignedTo|dkukawka@novell.com |puzel@novell.com Status Whiteboard| |hal --- Comment #9 from Petr Uzel <puzel@novell.com> 2010-08-04 13:19:23 UTC --- Debian bug: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=562068 This patch fixes it. http://svn.pardus.org.tr/pardus/corporate2/devel/hardware/info/hal/files/dcb... Maintenance team: please provide swamp id. Thx -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=577489 http://bugzilla.novell.com/show_bug.cgi?id=577489#c10 --- Comment #10 from Leonardo Chiquitto <lchiquitto@novell.com> 2010-08-04 17:45:45 UTC --- Important to fix and patch is trivial, +1. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=577489 http://bugzilla.novell.com/show_bug.cgi?id=577489#c11 --- Comment #11 from Jan Grosser <email@jan-grosser.de> 2010-08-04 19:44:04 UTC --- (In reply to comment #10)
Important to fix and patch is trivial, +1.
Unfortunately, I have very basic linux skills. What I did so far: 1) Downloaded latest HAL sources from http://cgit.freedesktop.org/hal/refs/ (HAL_0_5_14.tar.gz) and umcompressed archive. 2) Downloaded the above patch to the root directory of the HAL sources directory tree (where e.g. the files README or HACKING resides). 3) Applied the patch with the command $ patch < dcb2829b8eff61463b0869614ddb07b1c86cecaa.patch .. but nothing seems to happen. I checked the file probe-inputs.c in the appropriate subfolder, but the changes described in the debian bug report seems not to be applied. @Leonardo: Can you provide me a step-by-step instruction how to apply the patch and to compile and install the patched HAL? Thank you in advance! -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=577489 http://bugzilla.novell.com/show_bug.cgi?id=577489#c12 --- Comment #12 from Leonardo Chiquitto <lchiquitto@novell.com> 2010-08-04 20:12:29 UTC --- Hi Jan, The intention is to release a fixed hal package as a maintenance update for openSUSE 11.3 (once the Maintenance Team approves it), so you won't need to patch or compile anything, just install the update :) By the way, I'd appreciate if you could test the fixed package that's now available in: http://download.opensuse.org/repositories/home:/leonardocf:/branches:/openSU... and report if it really resolves the problem. Thanks! -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=577489 http://bugzilla.novell.com/show_bug.cgi?id=577489#c13 --- Comment #13 from Jan Grosser <email@jan-grosser.de> 2010-08-04 20:31:51 UTC --- Hi Leonardo!
By the way, I'd appreciate if you could test the fixed package that's now available in:
http://download.opensuse.org/repositories/home:/leonardocf:/branches:/openSU...
and report if it really resolves the problem. Thanks!
Thank you for your early reply! I recently upgraded to the fixed package provided in the repository mentioned above. And ... the hald-probe-input segfault error messages disappeared in dmesg after reboot! Thank you! Regards, Jan -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=577489 http://bugzilla.novell.com/show_bug.cgi?id=577489#c14 Christian Dengler <cdengler@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |NEW CC| |cdengler@novell.com InfoProvider|maintenance@opensuse.org | --- Comment #14 from Christian Dengler <cdengler@novell.com> 2010-08-05 10:37:47 UTC --- +1 Update started. Be so kind and submit a patchinfo and the fixed sources. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=577489 http://bugzilla.novell.com/show_bug.cgi?id=577489#c15 Swamp Workflow Management <swamp@suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status Whiteboard|hal |hal maint:running:34987:low --- Comment #15 from Swamp Workflow Management <swamp@suse.com> 2010-08-05 10:38:09 UTC --- The SWAMPID for this issue is 34987. This issue was rated as low. Please submit fixed packages until 2010-09-02. Also create a patchinfo file using this link: https://swamp.suse.de/webswamp/wf/34987 -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=577489 http://bugzilla.novell.com/show_bug.cgi?id=577489#c16 Leonardo Chiquitto <lchiquitto@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |lchiquitto@novell.com --- Comment #16 from Leonardo Chiquitto <lchiquitto@novell.com> 2010-08-05 11:33:41 UTC --- Patchinfo filled and package submitted against openSUSE:11.3:Update:Test (request id 44575). -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=577489 http://bugzilla.novell.com/show_bug.cgi?id=577489#c18 Leonardo Chiquitto <lchiquitto@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |sbrabec@novell.com --- Comment #18 from Leonardo Chiquitto <lchiquitto@novell.com> 2010-08-09 12:17:53 UTC --- *** Bug 624851 has been marked as a duplicate of this bug. *** http://bugzilla.novell.com/show_bug.cgi?id=624851 -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=577489 http://bugzilla.novell.com/show_bug.cgi?id=577489#c19 --- Comment #19 from Stanislav Brabec <sbrabec@novell.com> 2010-08-09 16:20:18 CEST --- Maybe a simpler solution with a static initializer (untested): DBusError error = DBUS_ERROR_INIT; And then delete dbus_error_init() call. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=577489 http://bugzilla.novell.com/show_bug.cgi?id=577489#c20 --- Comment #20 from Leonardo Chiquitto <lchiquitto@novell.com> 2010-08-09 19:25:54 UTC --- Yes, I think that would be simpler, but we would be diverging from upstream: http://cgit.freedesktop.org/hal/commit/?id=dcb2829b8eff61463b0869614ddb07b1c... -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=577489 http://bugzilla.novell.com/show_bug.cgi?id=577489#c21 Swamp Workflow Management <swamp@suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status Whiteboard|hal maint:running:34987:low |hal maint:running:34987:low | |maint:released:11.3:34990 --- Comment #21 from Swamp Workflow Management <swamp@suse.com> 2010-08-12 15:18:15 UTC --- Update released for: hal, hal-debuginfo, hal-debuginfo-32bit, hal-debuginfo-x86, hal-debugsource, hal-devel Products: openSUSE 11.3 (debug, i586, x86_64) -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=577489 http://bugzilla.novell.com/show_bug.cgi?id=577489#c Swamp Workflow Management <swamp@suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status Whiteboard|hal maint:running:34987:low |hal |maint:released:11.3:34990 |maint:released:11.3:34990 -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=577489 http://bugzilla.novell.com/show_bug.cgi?id=577489#c22 Leonardo Chiquitto <lchiquitto@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|ASSIGNED |RESOLVED Resolution| |FIXED --- Comment #22 from Leonardo Chiquitto <lchiquitto@novell.com> 2010-08-12 15:25:29 UTC --- Updates released for openSUSE 11.3. Closing as FIXED. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=577489 https://bugzilla.novell.com/show_bug.cgi?id=577489#c23 Leonardo Chiquitto <lchiquitto@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |nettezzaumanaa@gmail.com --- Comment #23 from Leonardo Chiquitto <lchiquitto@novell.com> 2010-08-25 13:23:17 UTC --- *** Bug 626549 has been marked as a duplicate of this bug. *** http://bugzilla.novell.com/show_bug.cgi?id=626549 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=577489 http://bugzilla.novell.com/show_bug.cgi?id=577489#c24 --- Comment #24 from Bernhard Wiedemann <bwiedemann@suse.com> --- This is an autogenerated message for OBS integration: This bug (577489) was mentioned in https://build.opensuse.org/request/show/55559 Factory / hal -- You are receiving this mail because: You are on the CC list for the bug.
participants (1)
-
bugzilla_noreply＠novell.com