http://bugzilla.opensuse.org/show_bug.cgi?id=1185592 Bug ID: 1185592 Summary: Settings from /etc/rdma/mlx4.conf are ignored Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem Assignee: screening-team-bugs@suse.de Reporter: jfunk@funktronics.ca QA Contact: qa-bugs@suse.de Found By: --- Blocker: --- Per the article at https://community.mellanox.com/s/article/howto-change-port-type-in-mellanox-... it should be possible to force the port type of a Mellanox VPI adapter to infiniband or ethernet by adding a line with the PCI address and the desired port types. However this is ignored. After some digging, it seems that this is supposed to work by hooking the module load in /etc/modprobe.d/50-libmlx4.conf. It attempts to run a script at /usr/lib/mlx4-setup.sh. However, that script does not exist. The rdma-core package instead installs it at /usr/libexec/mlx4-setup.sh. Steps to reproduce: - Have a Mellanox VPI card supported by the mlx4 driver (dual-personality infiniband/ethernet) - Set the ports to eth in the /etc/rdma/mlx4.conf, eg: "0000:27:00.0 eth eth" - Reboot Expected result: - Ports should be ethernet type Actual result: - Ports are infiniband type -- You are receiving this mail because: You are on the CC list for the bug.