https://bugzilla.novell.com/show_bug.cgi?id=880631 https://bugzilla.novell.com/show_bug.cgi?id=880631#c0 Summary: udisks2 sends invalid request to USB drive causing some drives to stall Classification: openSUSE Product: openSUSE 13.1 Version: Final Platform: x86-64 OS/Version: openSUSE 13.1 Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening@forge.provo.novell.com ReportedBy: novell@hlipp.de QAContact: qa-bugs@suse.de Found By: --- Blocker: --- Created an attachment (id=592641) --> (http://bugzilla.novell.com/attachment.cgi?id=592641) Use SECTOR_COUNT=1 when issuing ATA IDENTIFY COMMAND: http://cgit.freedesktop.org/udisks/commit/?id=81a350fca9431048175fcf639909d9... User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:29.0) Gecko/20100101 Firefox/29.0 As described in https://bugs.freedesktop.org/show_bug.cgi?id=73780 and http://comments.gmane.org/gmane.linux.usb.general/100377 udisks2 sends an invalid request to USB drives. This causes some drives to stall. After 30 seconds, the kernel will reset the drive. After this reset, the drive can be mounted manually, but not using the GUI. After applying the change mentioned above (see also attachment and spec file http://www.hlipp.de/suse/udisks2.spec ), the problem is fixed. Please apply this patch. Reproducible: Always Steps to Reproduce: 1. Plug in an affected USB drive. 2. Wait for 30 seconds and have a look in the syslog / dmesg Actual Results: The system resets the drive ("kernel: [10812.783040] usb 2-1.2: reset high-speed USB device number 4 using ehci-pci"), the drive cannot be mounted using the GUI Expected Results: The drive should not be reset and the user should be able to mount it. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.