[Bug 921218] Wireless with wicked does not get an address at boot time
![](https://seccdn.libravatar.org/avatar/3035b38ff33cf86f480bb169b8500b80.jpg?s=120&d=mm&r=g)
http://bugzilla.opensuse.org/show_bug.cgi?id=921218
Pawel Wieczorkiewicz
Hello Pawel, I have a desktop PC with eth on board, butnot used. wlp4s1 is the only interface, which connectets to network (wireless) I attach logfiles and a description of the actions I taken.
Kind regards Martin
Hi Martin, I believe the problem here is that the right RPMs were not installed. Thus after reboot you see the same issue. In order to install them (here I am assuming you are using 13.2) do the following steps: Variant 1: - wget http://download.opensuse.org/repositories/home:/pwieczorkiewicz:/branches:/n... - wget http://download.opensuse.org/repositories/home:/pwieczorkiewicz:/branches:/n... - wget http://download.opensuse.org/repositories/home:/pwieczorkiewicz:/branches:/n... - sudo rpm -Uhv --force --nodeps libwicked-0-6-0.6.17-10.1.x86_64.rpm wicked-0.6.17-10.1.x86_64.rpm wicked-service-0.6.17-10.1.x86_64.rpm - systemctl restart wickedd Variant 2: - wait for official wicked 0.6.18 release :-) BTW: In case of variant 1 do not forget to get back to the official 13.2:Update track, when 0.6.18 wicked is out (you will be informed by comments on this bug), by issuing zypper dup. -- You are receiving this mail because: You are on the CC list for the bug.
participants (1)
-
bugzilla_noreply@novell.com